Remote app with iOS 5.1 possible?

In The app store only iOS 7 for down load!!

There are rumors that apps for older versions of iOS will be available, but they are not available currently.

Similar Messages

  • Problems with Remote App on iOS 4?

    I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
    I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
    Are there any known problems with iOS 4 and Apple TV?

    Chenks wrote:
    maybe for you, but isn't for me.
    i have the remote app on my iphone4 and it's connected to 2 appletv's.
    i don't experience any dropping of connection etc.
    May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
    http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
    bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
    At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • AIO REMOTE app on IOS

    I use the AiO Remote app on IOS to scan legal size documents.  I think my problem is with the latest update of this app as I never had this issue in the past.  I scan the multi-page LEGAL size doc with no issues.  I see the doc pages in legal size format in the app.  Once I click on SAVE, all of a sudden the app shrinks the legal size to fit letter size.  I can't find how to disable this.  Thanks in advance for any help.

    Hey @iDADx7, 
    Welcome to the HP Support Forum.  
    I understand you're encountering a document formatting issue when using the HP All-in-One Printer Remote app with your HP Officejet 6600 e-All-in-One Printer.  I would like to help.  
    What version of iOS are you working with?  Try uninstalling the app and then clicking here to reinstall.  Does the issue persist?  
    Please let me know the result of your troubleshooting by responding to this post.  Thank you for posting in the HP Support Forum and have a great day!  
    Regards, 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Remote app in iOS 7 doesn't bring keyboard when entering text.

    I tried to use the remote app with my new iPad air with iOS 7 with and when I tried to make a search for a movie it won't bring the keyboard as before when entering text. The funny thing is that I have an old iPod 4th gen with iOS 6, and that one still brings the keyboard every time text needs to be entered, even still has the option to hide and bring out the keyboard. Is this feature gone forever in iOS 7? Or is missing and will be added later?

    This is now fixed. The remote has two modes. It starts with an interface similar to iTunes to play music or videos from your library, on the top right side it has a keyboard (mine appeared greyed out and I was unable to activate it, but now works), and an axis which brings the other remote everyone is familiar with to select the icons on the tv screen. The other remote now has a small keyboard icon on the top right which didn't used to have before. I don't know what I did to activate it, however, it won't bring the keyboard automatically like before. Another way to bring the keyboard, if yours still stuck, is to highlight any of the letters in the menu, and swipe from right to left, the highlight will cursor will hide, swipe again and that brings up the keyboard. How? Why? Still a mystery to me, but I happy I can use remote again.

  • Eos remote app for iOS

    The idea was great, however the development seems to be stopped on this.
    It hasn't been updated since Dec of last year.
    Will there be a new version of EOS Remote app for iOS?
    Features I'd like to see from the upgrade (if there's any)
    1) Full size image transfer
    2) Video file transfer
    3) Indicate if a file is already downloaded to the phone or not.
    Thanks,

    Hi rmpark!
    Thanks for posting.
    The EOS Remote App currently works with up to iOS version 7.  I am not sure if or when the next version of the app will be released, or what features will be added to it, but I have forwarded your suggestions along.  This feedback is very important to Canon.  Please continue to check in the app store from time to time for any updated versions that may be released.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Remote app with Apple TV

    I use the Remote app with both an iPad and iPhone to control my first gen Apple TV. This works fine except for one thing. When I select "Apple TV" as the library, using an iPhone I have access to all my library including Podcasts. When I run the same app on my Ipad, still selecting "Apple TV" as the library, no Podcasts come up on the iPad to select - the category is completely missing.
    Has anyone else seen this issue ? Are they still there but hidden somewhere else ? Bear in mind I keep no content on the Apple TV - it is effectively just acting as a wireless device to get the signal to my TV.

    Literally nothing happens. I click the done button and hear a beep. Over and over again.
    On the phone, the passcode is still displayed.
    Thank you for your help.

  • HT1947 Remote app under iOS 7 does not rotate to landscape mode

    I am using the remote app to control iTunes on my computer.  I have an iPad 2 with iOS 7.0.2.  The remote app only displays in portrait mode.  If I rotate the iPad the app stays in portrait mode.  Anyone know how to fix this.

    Thanks so very much. That was exactly what I needed to know. May God Bless you for your helping heart.

  • Keyboard issue using Danish keyboard on Remote app for iOS.

    Hi there.
    I have noticed a quite annoying issue with the Remote Desktop for iOS when using foreign keyboards along with the Remote Desktop app.
    The PC I'm remoting to from my iPad Air is a Windows 7 machine with an English Windows.
    I have a danish keyboard layout installed, and have removed the English keyboard.
    But.. Here comes the strange issue.
    If I connect via Remote Desktop before I log into my PC (from my PC), the special characters like :;/*^%}{ ect. works just fine on my iPad.
    If I then log on to my PC from the PC, the keyboard on the PC has been changed to english, even though there's no english keybord layout installed on my PC.
    The special characters like the danish æøå has been changed out with ; and other wrong characters.
    I then have to press CTRL+SHIFT on my PC to change it back to the danish layout.
    But... If I do so on my PC and afterwards connect via the Remote Desktop app on my iPad Air, the keyboard is messed up on my iPad.
    All the special characters like /:;)(^#%{ is placed wrong and give me a wrong character.
    And that happens even if I change the keyboard on my iPad to English.
    I really hope you will be able to fix this in a future update enabling full support for foreign keyboards between iOS7 and Windows 7.
    Thanks in advance.
    - Bjørn, Denmark

    Hi,
    Why are the characters mixed up in the session?
    This issue can occur if the keyboard language has been switched on the remote PC while running a remote desktop session. In the case you would like to switch to a different keyboard language
    follow these instructions.
    Note: The remote PC selects the system language of the device running the remote desktop client and not the keyboard language. When switching the keyboard language on your device, you need
    to manually switch the keyboard language on the remote PC.
    1. Open settings on your device.
    2. Tap General and then tap International.
    3. Tap Language and select the language running on the remote PC.
    4. Open the RD Client and connect to the remote PC and check if the Windows keyboard language matches the language that you selected.
    http://technet.microsoft.com/library/dn473015
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • Unable to pair Apple Remote App with iTunes

    I am running a Toshiba Satellite L505D-S5965 with Windows Vista SP 2. My iTunes software is 8.2.1.6, and my iPhone 3GS is running OS 3.0.1 (7A400). Both the Satellite and iPhone are connected to the same WiFi local network, and yet the App "Remote" by Apple Software is unable to communicate with iTunes to allow the entry of the four digit code to establish control of the iTunes library. Shortly after purchasing the iPhone 3GS I purchased the Satellite, but in the couple of weeks between the purchases the Remote App worked fine on my Gateway running Windows XP SP2. I have been through Apple Telephone support twice, and have really run one of the technicians through the mill researching possible solutions. I have visited an Apple Store Genius, who could find no reason for the problem. The iPhone and Remote App worked perfectly well on the store's WiFi and Mac, but his iPhone also wouldn't work with my laptop. I have been through Kaspersky's technical support system to ensure that there isn't a firewall issue. They have assured me, after reviewing logs from my laptop, that this is not the case. I even went so far as to uninstall all my Kaspersky product, but the Apple Remote App still would not function properly. I have updated the router's firmware, and checked that the laptop's wireless card is running the latest driver. At this point I can't think of anything else to try but would really appreciate any suggestions. Thanks, Steve

    Monday 7th Jan.
    Just to say that Apple did call me this am to discuss the problem on foot of a call I made last week.
    In the meantime the remote worked with both a 2007 IMac and a 2009 laptop but not on the m-mini.
    When I tried  pairing this morning during the call by pressing Menu and next together it paired.
    The change is very subtle, it just says paired in the advanced section of the security et sl section as referred before, with a fleeting 2 intersecting rings icon.
    The big difference is that Front Row is gone....
    The remote only works to a limited degree within some apps such as iTunes and iPhotos.
    In theory it controls the volume in iTunes but as of now for me  it doesnt....:( need to look more.
    As to what the problem was:
    It seems there is a set of keyboard combinations that can be used to force a  reset the ID of the remote, the suggestion is  MAYBE that by getting it to work on the iMac and laptop in some way reset the ID.
    This stuff  is WAY beyond my skill level:)
    I did impress upon Apple the need to look at the issue in threads like this....
    Message was edited by: qazxsw52

  • Iphone Remote App with Linksys having problems

    Okay I have a Linksys Wirless Router, my Laptop and iphone connect to the linksys via wireless using WPA, the wireless works great, I get my iphone hooked to the wireless network .. check stocks, weather, google around.. all that works !
    I use my Remote App on my iphone and sweet that works too ... connects to my library shows my playlist on itunes .. I can play rewind, skip - everything works .. for about 3 - 4 minutes ...:( I play the songs i want click on skip a couple and boom, within 3-4 minutes my entire wireless network is down !
    my linksys goes into a frenzy ... If i leave the remote app alone .. my linksys would run just fine forever ... 3 - 4 minutes into using my iphone remote app and my wireless networks toast ... anyone here having the same issue ?
    I have a airport express that I plan to use as my default wireless router (replacing my linksys) to see if apples own wirless router has this problem as well ..
    I sure hope not ... will keep posted .. but let me know if anyone is experiencing the same problem and if there is a fix ...

    Hi,
    Since I upgraded the Remote software to version 1.3.3 (4) it seems that when I'm browsing the music Library of my Apple TV, I can click on any artist and or album. So far so good, but after selecting, the tracktitle is shown on top of the screen, but the track is not loaded and cannot be played.
    If I unplug my Apple TV then it works again, but after browsing and changing tracks 1 or 2 times, the bug occurs again.
    Martijn I've read your the post and tried to delete the songs/artists that have the word 'Edit' in it, re-synchronized the apple TV with my iTunes Library, but no luck for me.

  • I can't seem to be able to download apps with IOS 8. I have been able to with other IOS 7 and IOS 6. Any suggestions?

    I Can't seem to be able to download (or update) any apps on IOS 8.0, and I have been able to download apps on IOS 7 and IOS 6. I have 5.2 GB of available space on my iPad (4th generation) and I have only used 7.1 GB on my 16GB ipad. I have a full two bars of Internet. Again I have been able to download things with two bars in the past using IOS 7 and IOS 6. Any suggestions would be helpful. =3    Sorry for the incorrect spelling  

    You might try just waiting. There are millions of people activating their iPhones today and people still trying to get iOS8, so the servers are swamped. I'd give it a couple of days and if it still doesn't work then try some troubleshooting.

  • Azure remote App with Azure SQL Backend

    Hi, If I had an application which utilised a SQL backend could I host the front end in Azure remote app and the backend on an Azure SQL database or would I need to use IAAS to provide the backend?
    Many thanks
    James 

    Hi James,
    If the application is designed to be compatible with Azure SQL Database then yes, you can use Azure RemoteApp for the frontend and Azure SQL Database for the backend.  If the application is not compatible with Azure SQL Database then you would
    need to use SQL Server running in an IaaS VM, or SQL Server running in an on-premises VM.  The IaaS VM or SQL Database should be in the same Azure region as the RemoteApp collection in order to minimize latency.
    For example, say you have an internally-developed application that uses SQL Server 2012 as its backend database.  Before you would be able to use Azure SQL Database you would first need to migrate the database to Azure SQL Database and make any changes
    necessary to the application and/or database for compatibility.  The SQL Database Migration Wizard is helpful for this process.
    -TP

  • How do I connect my iPod remote app with itunes?

    I can't get my remote app to connect with my computer, I've tried everything that I could find in the help menu but I still can't get it to work.

    I've had trouble with it before as well, so you are not alone.  Be sure to try all of the steps listed in then Resolution section of the document because your iTunes settings may not be the problem.  The issue for me ended up being a firewall setting:
    Click on System Preferences
    Click Security
    Select the Firewall (tab)
    Click the Advanced button (may require Administrator password)
    Ensure that iTunes has "Allow incoming connections" selected and click OK
    Try it after that and see if it works.  If not then reboot your computer and router (and/or wireless access point) and try it again.  Let me know if this fixes it.

  • Outlook 2010 as a remote app with Remote Exchnage

    Hello All
    I am running RDS Farm with Windows Server 2008 R2. I have 2 RDS servers connected to domain and so on.
    I have managed to "publish" Internet Explorer as a remote app (For secure surfing) and it works perfectly.
    Now I would like to publish Outlook 2010 as a remote app and getting this issue:
    When I try to run the published outlook shortcut, it opens up the outlook profile initialize in order to get the exchange server settings which is ok. But when I try to type my exchange server parameters
    it does not accept it and I get the attached screenshot error.
    It seems like it does not "see" the Exchange server from the remote app.
    On the other hand, if I log on to one of the rds servers with RDP (as remote desktop) and open up outlook, it accept the details and works fine. ( Basically I do not want to publish
    a full remote desktop but only specific remote apps )
    From some reason when I run the Outlook as a remote app it does not recognize the Exchange server and won't let me setup the profile.
    Even if I type the ip address of my exchange I get the same error, so I assume it has nothing to do with DNS issue nor Firewall or Antivirus.(?)
    In addition, Once I do manage to initialize the profile through the RDP and then run it from the remote app it works.
    Obviously I cannot log on with 60 with remote desktop and initialize their profiles, I need to publish it and configure the profile from the remote app....
    some more details :
    1. Windows 2008 R2 Domain environment.
    2. Exchnage server 2007 Std.
    2. LAN is on a different segment from RDS Farm and Exchnage Server is on a difrenet Segment as well.
    3. If any other details is needed please let me know.
    Moreover, this post seem to be similar to my issue but I am not sure if it would solve my issue. (http://social.technet.microsoft.com/Forums/windowsserver/en-US/059a57ad-09e0-4b2d-9292-18532f7d0339/outlook-2010-server-is-unavailable-error-when-starting-remote-app?forum=winserverTS)
    Thanks in advance!

    Hi Gil,
    Please make sure that we have enabled Outlook Anywhere and installed the trust certificate on our Remote Desktop.
    More details in the following article:
    How to Enable Outlook Anywhere
    http://technet.microsoft.com/en-us/library/bb123889(v=exchg.80).aspx
    Feel free to contact me if there is any problem.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

Maybe you are looking for