Remote Apps launch with a command window

All RemoteApps launch with the program and a black DOS window. How can I disable this DOS window from launching. I have searched and found no solution. Even using a VB script does not help.

HI
I strongly believe this could be an issues with some other software or any virus may be trying to execute when app is launched.
This is never a function of remote APP. You need to find out from where and how the command window is launched.
Login to server directly and try to launch the same application and find what is happening and form where it’s getting CMD.
Even you can use some register and application monitoring tools and find what functions are called, if you feel fixing the issues is only options rather than reinstalling the server.

Similar Messages

Error message in scanning:"The scanning software was launched with improper command- line arguments"

We have downloaded and installed the HP Photosmart full feature Sostware and Drivers to Photosmart C3183 All-in-one.
Click the Scan document in Solution Center-
Error message displayed:
The scanning software was launched with improper command-line arguments"
Extended error information: 8,[(-1,0,0)]
When Hp scan diagnostic utility was used - the message was: no scanners installed.
how can we resolve the scanning problem
nidataytay

I have the same problem on a HP 5610 Officejet All-in-One.
"The scanning software was launched with improper command-line arguments.
8, [(-1, 0, 0)]"
What is the solution? The scanner does not work. All other functions, print, fax, copy work from with in the HP Solutions Center software - but not the scanner.

ITunes 11.1.3.8 in Windows 7, 64-bit, not working with Remote App or with Airport Express

The last time I tried to use both the Airport Express and the Remote App was probably about 6 or 7 weeks ago, and they worked fine. However, with the current version, none of it is working. I've tried restarting, and reinstalling iTunes from scratch. I've rebooted the wireless router. Both devices are connecting to the network, getting DHCP leases, and can communicate over the network just fine for other means. The Airport Utility can talk to the Airport Express over the wireless, and the iPhone can reach everything else as well.
If I plug the Airport Express into ethernet, iTunes still can't see it. But I can still talk to it with the Utility.
Everything seems to indicate proper networking, and yet neither of them can talk to iTunes anymore. What changed in the software? Everything is the same with my network.

Hi guys! I have just found a solution in a different thread - huge thanks to Toploader21120:
1) open control panel.
2)Choose Network and internet
3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
5) Click the properties button
6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
7) Click CLOSE
8) Restart iTunes and try to use the Home Sharing feature again.
Apple dudes, please, do include it in FAQ!

Switching between apps launched through RemoteApp from Windows 2008 R2 server

I have a problem with RemoteApp on Windows 2008 R2 Standard SP1.
When I try to switch between apps, launched from RD Web Access web-page, it is not always succeded. Instead of it the target app blinks and I still remain at the previous app. In another words, the next app window remains behind the previous
app window and I have to minimize the previous app before switching to the next app.
Following the recommendations given by the TechNet Online Chat assistant, I've been installed all the available updates on that server from the Microsoft Update, but it didn't help us.
Is there any way to resolve this trouble?
Thank you.

Hi,
Thanks for posting in Windows Server Forum.
Which version of RDP client you are using? I can suggest you to use RDP 8.0 for better assistance.
Remote Desktop Protocol (RDP) 8.0 update for Windows 7 and Windows Server 2008 R2
http://support.microsoft.com/kb/2592687
In addition there are available updates for RemoteApp for server 2008 R2, you can install and check the result.
Available Updates for Remote Desktop Services (Terminal Services) on Windows Server 2008 R2 SP1
http://support.microsoft.com/kb/2601888
Hope it helps!
Thanks,
Dharmesh

ITunes Remote app on Ad Hoc network (Windows 7)

Is it possible to use the iTunes Remote to control a computer that is using a wireless card to create an "Ad Hoc" network. I plan on building a computer for storing my Apple Lossless files on a Windows 7 machine and using it strictly for playback as a standalone device. I will be pairing it with a USB DAC & Headphone amp combination.
I either need to buy a monitor (not wanting to do this) or find a way to be able to navigate my iTunes library from this machine without a screen (prefered). I will NOT have an internet connection at work where I will be using this, however I could purchase a wireless card to install in this itx machine to create an ad hoc network provided I could then use the iTunes Remote app to control playback and view albumn art, etc.
Is this setup possible, or am I chasing a dream?

I have the same problem. How did you fix this?

Office 2013 windows 'pop-under' when run as remote apps on Server 2008R2 from Windows 7 clients

We have an environment with Windows 7 clients running Office 2013 via RDS on Windows Server 2008R2.
When users double click emails from Outlook, they 'pop-under', forcing the user to relocate the window which has fallen behind the application's primary window, leaving behind a slight redraw of what is supposed to be the pop-up window. Users also experience
difficulty opening application menu/help items and any other dialogue boxes in any/all of the other Office 2013 apps we've deployed via RDS.
This issue persists only on Win7 PCs (WinXP does not exhibit this behaviour). The RDP clients range from 6.2.92 to 6.1.7601
We have applied the hot-fixes applicable to all of the following KB articles:
- KB983533 (failed / update not applicable)
- KB2384602 (failed / update not applicable)
- KB2614136 (failed / update not applicable)
- KB2580346 (Installed successfully, but issue unresolved)
- KB2522762 (Installed successfully, but issue unresolved)
- KB2538047 (Installed successfully, but issue unresolved)
- KB2604066 (Installed successfully, but issue unresolved)
- KB2705427 (Installed successfully, but issue unresolved)
- KB2682814 (Installed successfully, but issue unresolved)

Hi,
Please give the new Remote Desktop Client 8.1 for Windows 7 a try when it is re-released (it was removed temporarily due to an issue with smart cards). It has fixes related to z-order issues, which
may correct the problem you are seeing.
Update for RemoteApp and Desktop Connections features is available for Windows
http://support.microsoft.com/KB/2830477
Thanks.
-TP

To use remote App.config file fails in Windows 8

I want to read app.config from the remote server on my NET 3.5 application.
For example, I'm updating "APP_CONFIG_FILE" to set remote app config like the below code.
It works fine on Windows 7 or previous windows version.
But on windows 8, the program is being in no-response stage(like kind of deadlock) when calling ConfigurationManager.AppSettings. There is no error message here and I have to kill the process manually by using Task manager.
I'll appreciate for any suggestion or comment.
static class Program
[STAThread]
static void Main()
AppDomain.CurrentDomain.SetData("APP_CONFIG_FILE", "http://xxxx/app.exe.config");
MessageBox.Show(ConfigurationManager.AppSettings["HelpFile"]);
Thanks

Hello momo898,
>> But on windows 8, the program is being in no-response stage(like kind of deadlock) when calling
I suggest that you could follow this blog below to find the detail caused reason:
http://blogs.msdn.com/b/tess/archive/2006/10/16/net-hang-debugging-walkthrough.aspx
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

New install of Acrobat XI Pro launches with empty license window

I purchased Adobe Creative Cloud 2014 but when I download & install Acrobat XI Pro, it launches with an empty license window. Two live chat sessions with Adobe tech support (including total uninstall & re-install) have failed to resolve this issue. Anybody see this behavior?

Hey Panadero,
Please attach a screenshot of the acrobat window -displaying the error message, so that i can analyze the issue and assist you better.
Regards,
Rahul

HT1947 Is the current Remote app compatible with iPod Touch 4.2.1?

This KB article says so, but iTunes will not load the current version of Remote onto a 2g 4.2.1 iPod Touch.
http://support.apple.com/kb/HT1947
I unfortunately had to restore my 2nd Gen iPod Touch, and in doing so, iTunes indicated that several existing apps were not compatible; including Remote. I do not have an older version of the Remote app in my back ups.
Would it be safe to assume that the KB article is incorrect? I sure would like to find a source for an older compatible version of Remote. I use this older Touch primarily for that purpose and it is disspaointing that it has now lost functionality.
Brian

think the problem is that the older versions will work if one have them
but one can't get them again if one does not

Remote data retrive with tar command

Hi all,
I want to extract data from the tape drive attached to remote hosts, but while extracting the data I get the error something like this:
read : Not enough space
0+0 record in
0+0 record out
The command to extract is
# rsh remotehost dd if=/dev/rmt/0 | tar xvf -
where remotehost is the remote hostname where tape drive is attached.
Had anyone faced the problem like this. I will be thankful if anyone assist me.
Best Regards,
Bikash

"not enough space" means that the space allocated by the process reading the tape was not sufficient to hold the data coming from tape. This basically means that the default block size chosen was too small. You need to increase the block size on the reader. Since you're reading with 'dd', you do it there.
dd if=/dev/rmt/0 ibs=32k
or 64k, or 128k, or whatever... Just keep making it bigger until you don't get that error. A size of 64k or 128k is very common. Significantly larger is uncommon.
Darren

Feature or a Bug - App launched with n/w cable unplugged

I have tested the following behaviour with both JWS 1.4.2 and JWS 1.5.0_06
The JNLP does NOT have a <offline-allowed> tag.
Expected behaviuor:
When I unplug the network cable from my PC and launch the application (already in the cache), Java Web start should give an error (this is as per SUN's documentation) and should not launch the application from the cache.
Observed behaviuor:
For both JWS 1.4.2 and 1.5.0_06, I unplugged the network cable from my PC and still JWS launched the application from cache.
This is very weird behaviuor and need immediate assistance. Has anyone else performed this test.

This looks like a bug (5075953) that was fixed for mustang but is still there in tiger.
I can confirm this , so I am opening a tiger version of the bug, and will ask that it is included in a future update release.
/Andy

App packaged with Flash CS6 windows installer can't be installed offline because of missing AIR RT

Hi all
I've build an Application in Flash CS6 and AIR SDK 3.5 for desktop and packaged it as a windows installer. When i try to install it on a windows 8 pro tablet with no internet connection (in my case an Acer Iconia w5) a window pops up, telling me that i need adobe air and i should download it at www.adobe.com/go/getair_de. I thought the AIR runtime is packaged inside the windows installer, so you don't need AIR preinstalled on your PC. I've added a screenshot of my setting:
Any help would be great

I think what you're looking for is the captive runtime. For that you'll want to select "Application with runtime embedded". This does however mean that you'll need to use your own "installer". This could be as simple as zipping the folder up or just copying it over.
http://help.adobe.com/en_US/air/build/WSfffb011ac560372f709e16db131e43659b9-8000.html

Exchange 2013 CU1 Outlook Web App LogOff with Basic or Windows Integrated Authentication

Hi all,
Exchange 2013 CU1 has a new OWA LogOff behaviour when Basic or Windows Integrated Authentication is configured. When clicking the LogOff Button you receive the message "Close All your Browser Windows.." but OWA does not sign out. This is not the
case when using Formbased Authentication...
The problem in our case is the OWA publishing over the Internet via TMG. When publishing via TMG, only Basic and NTLM authentication is supported. This means you have to change the Authentication for the OWA Virtual Directory to basic or Windows Integrated.
OK so far, now we can use the TMG Authentication Form. but... TMG is not able to Catch the OWA LogOff. So we will still receive "Close all your Browser Settings.." and no log out from OWA.
It is a known issue that TMG cannot catch the OWA Logoff with the Exchange 2013 CU1 Release..So my Question:
Does anyone get that "Real LogOut" fixed via TMG or directly on the CAS Server for Exchange 2013 CU1?
I know another possibility is to activate Form Based Authentication on the CAS Servers and external users directly authenticate against the CAS Server without pre-authentication at TMG Level, but this of course does not provide the highest security
we can have.

Hi SLShare,
As far as I know, if there is no TMG involved, with Exchange 2013 when the user signs out of mail, the authentication tokens are cleared and the user will be presented with the
Login Screen. There will not be a need to click on "Close Window" or any other pop ups that may appear.
Therefore, you may ask the TMG forum about this question and see whether there are still some other workaround we can temporary bypass this issue. For your convenience:
Forefront TMG and ISA Server Forum - TechNet - Microsoft
http://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=Forefrontedgegeneral
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Remote App on iPad not working with ATV

The remote app on my iPad (1st gen) was working fine with ATV last week. I noticed when using ATV there was a message about updating the ATV to a new version. I skipped the update each time as I just wanted to watch the program. However, we recently had a power outage which caused the ATV to shut down and I'm assuming launched the update as I didn't see the update message last night. However, I'm not able to use my iPad remote app with ATV any longer. When the remote app launches it indicates that it connected and it sees both ATV's. Yet, there is no ability to control the ATV. My iPhone 4S does not have this problem; It still works perfectly. I also have an iPad 2 and 3 and will check that shortly. Does anyone know for sure if the recent updates caused iOS 5.0 users to loose functionality?
Thanks,
Jeff

Hello ElCidPhysics90,
The following article contains a number of steps that should be helpful in getting the Remote app working correctly again.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Cheers,
Allen

Problems with remote app solution suggestion!

Hello,
I have been trying to get the Remote app to work on my windows 8 PC, but to no result. I am using an iPhone 5S. I believe the problem is that my PC is a desktop connected to the internet via ethernet. This is a very common issue. I spent around 5 hours on the phone with apple support, but all I got from them was a very long conversation. Even the senior support supervisor could not help me. Many people use iTunes on PCs that are connected via ethernet and they are unable to use the Remote app because it lacks a very basic and simple feature: to enter the host IP manually. When a PC is connected via ethernet to a router rather than wirelessly it cannot be found by the iPhone as a device that exists in the network, so you need to find it manually. Hopefully some of the higher-ups will hear this simplest of ideas and implement it, so the remote app no longer gets 1 or 2 star reviews saying it does not work.

Welcome to the Apple Community Johnson4o.
That's not correct, homesharing works over wired, wireless and mixed. If you have enabled homesharing correctly on both devices, then there' same problem with your network or settings, there is no need to add manual IP's, in fact there is nowhere to do so.

Remote Apps launch with a command window

Similar Messages

Maybe you are looking for