Remote bitmap cache is disabled

Hi , i noticed a statement in the log file
"Remote bitmap cache is disabled"
what does it means ,
does it means that the calculation is not using calculator cache ?

This error I get a lot. It is most likely to occur when theserver does not respond within a system given time. When I stressthe server and try to calculate a database, it may occur.It also happend when I had a bad member calculation set and thedatabase simply crashed while trying to calculate the member.It also occurs when the server is shutting down services for aback-up routine, something I experience a lot when calculatingovernight.

Similar Messages

If sga_target set explicitly, result cache become disabled

hi all,
I am using 11g R2 and automatic memory management. I realized something. if I explicitly declare sga_target parameter in parameter file, result cache become disabled.
as you know if you use automatic memory management, sga_target is set to 0 automatically already but if I write that to the parameter file than whatever I set for result_cache_max_size parameter, instance always opens with result_cache_max_size=0 (I saw that in alert log).
is there any reason for that ?
here is my pfile contents.
orcl.__db_cache_size=922746880
orcl.__java_pool_size=33554432
orcl.__large_pool_size=16777216
orcl.__oracle_base='C:\app\paranoyakX'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=838860800
orcl.__sga_target=1258291200
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=251658240
orcl.__streams_pool_size=16777216
*.audit_file_dest='C:\app\paranoyakX\admin\orcl\adump'
*.audit_trail='DB_EXTENDED'
*.compatible='11.2.0.0.0'
*.control_files='C:\app\paranoyakX\oradata\orcl\control01.ctl','C:\app\paranoyakX\flash_recovery_area\orcl\control02.ctl'
*.db_16k_cache_size=0
*.db_4k_cache_size=0
*.db_block_size=8192
*.db_domain='oracle.com'
*.db_flashback_retention_target=1000
*.db_keep_cache_size=0
*.db_name='orcl'
*.db_recovery_file_dest='C:\app\paranoyakX\flash_recovery_area'
*.db_recovery_file_dest_size=10737418240
*.diagnostic_dest='C:\app\paranoyakX'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_max_target=34359738368
*.memory_target=2097152000
*.nls_language='TURKISH'
*.nls_territory='TURKEY'
*.open_cursors=300
*.pga_aggregate_target=528482304
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.resource_limit=TRUE
*.undo_tablespace='UNDOTBS1'
*.result_cache_max_size=5000000
*.sga_target=0

I would suggest that you pay more attention to documentation and don't jump to conclusion in a haste. Just because the parameter result_cache_max_size is set to 0, it does not mean that the result cache in itself is disabled. This is the maximum size of the result cache. See below,
[oracle@edbar2p0-orcl ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Jul 14 08:35:00 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
SQL> sho parameter result
NAME                                 TYPE        VALUE
client_result_cache_lag              big integer 3000
client_result_cache_size             big integer 0
result_cache_max_result              integer     5
result_cache_max_size                big integer 1184K
result_cache_mode                    string      MANUAL
result_cache_remote_expiration       integer     0
SQL> show parameter sga
NAME                                 TYPE        VALUE
lock_sga                             boolean     FALSE
pre_page_sga                         boolean     FALSE
sga_max_size                         big integer 460M
sga_target                           big integer 0
SQL> set autot trace exp
selSQL> ect /*+ result_cache */ * from scott.dept;
Execution Plan
Plan hash value: 3383998547
| Id | Operation          | Name                       | Rows | Bytes | Cost (
%CPU)| Time     |
|   0 | SELECT STATEMENT   |                            |     4 |    80 |     3
(0)| 00:00:01 |
|   1 | RESULT CACHE      | 1c13q1afp56bq0jpnmysvywx7g |       |       |
     |          |
|   2 |   TABLE ACCESS FULL| DEPT                       |     4 |    80 |     3
(0)| 00:00:01 |
Result Cache Information (identified by operation id):
   1 - column-count=3; dependencies=(SCOTT.DEPT); name="select /*+ result_cache
*/ * from scott.dept"
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing optionsThe value for the result_cache parameter is automatically set by oracle depending on either you have Memory_target/SGA_TARGET or Shared_Pool parameter set. Please see oracle documentation for more information.
HTH
Aman....

Only One domain controller, Remote Registry service keeps DISABLING itself. Where in the registry could this be set?

This is killing my remote management. I have 4 server 2012R2 domain controllers. Only one of them is being affected with this problem. Almost everytime I check, the remote registry service is disabled again. It seems like there is a corrupt
group policy preference that keeps on attacking during a policy refresh, but I can't imagine setting a group policy to disable this service. It is needed for our remote management. Also the IP Tunnel service is also disabling. Another strange
artifact is that when I set a Windows Firewall policy to add an exception for remote administration in a group policy to my Admin workstation, it seemed to set a firewall rule in other computers to block remote administration. I can not figure out where
else this strange Windows Firewall rule Blocking remote administration could have come from. These may be related or they may not, but they are occuring on the same domain controller. I am able to set the RemoteRegistry service to enabled and to
start it (which I have done too many times now), but it constantly is being changed back to disabled. I am searching the registry to find any invalid entries or artifacts that may be affecting these two annoying effects, but I cannot find anything yet.
Any ideas? I need to know what policies will disable the remoteregistry service OR the IPTunelling service, or where in the registry this could be set to enact this during a policy refresh. Of course, any other ideas are welcome, I have spent
several days troubleshooting this, and need to conquer this by tomorrow if possible, thank you. James

Hi,
Please type
services.msc in RUN to open Services panel, navigate to the Remote Registry service. Then open its Properties and set
Startup type: Automatic. Then please check if this issue still exist.
In addition, please refer to mlippold’s suggestion (the last reply) in following thread and configure relevant
value in RemoteRegistry registry key, then check if can help you to solve this issue.
For registry items, please back up all registry items before all operations. That will help us to avoid some unexpected issue.
Remote
Registry Service stops automatically if we do not use it above 10 minutes
By the way, did you open Event Viewer and check if find any relevant errors?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Java WebStart application fails to load when cache is disabled.

We have a problem with our application when using the latest version of Java (Update 20). We a lanching a jnlp file using Java WebStart.
Until to the early release Update 21 b05, we had the following exception:
java.lang.NullPointerException
     at java.util.jar.JarVerifier.mapSignersToCodeSource(Unknown Source)
     at java.util.jar.JarVerifier.mapSignersToCodeSources(Unknown Source)
     at java.util.jar.JarVerifier.getCodeSources(Unknown Source)...
Which was fixed with the following bug resolution: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6943522
Now with that latest version that initial problem got resolved, but a new one appeared. The problem described below, only appears when the "Java Cache"
of the control panel is disabled. We tested all the following scenarios:
- Cached data cleaned / Cache enabled: Works
- Cached data / Cache enabled: Works
- Cached data cleaned / Cache disabled -> Exception
- Cached data / Cache disabled -> Exception
* We have already check the signature of the resource manually and it is correctly signed.
* We have checked the jnlp with JaNeLA, and it's good.
* No matter what we change, every time Java Cache is disabled, we get the exception.
The exception thrown is the following:
com.sun.deploy.net.JARSigningException: Found unsigned entry in resource: http://server/resource.jar
     at com.sun.javaws.security.SigningInfo.getCommonCodeSignersForJar(SigningInfo.java:405)
     at com.sun.javaws.security.SigningInfo.check(SigningInfo.java:291)
     at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper(LaunchDownload.java:1738)
     at com.sun.javaws.LaunchDownload.checkSignedResources(LaunchDownload.java:1508)
     at com.sun.javaws.Launcher.prepareResources(Launcher.java:1231)
     at com.sun.javaws.Launcher.prepareAllResources(Launcher.java:620)
     at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:326)
     at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:198)
     at com.sun.javaws.Launcher.launch(Launcher.java:115)
     at com.sun.javaws.Main.launchApp(Main.java:417)
     at com.sun.javaws.Main.continueInSecureThread(Main.java:249)
     at com.sun.javaws.Main$1.run(Main.java:111)
     at java.lang.Thread.run(Thread.java:619)
Can someone give any light on this issue?
For me it look very clearly like another bug related the first fix, but I wanted to pop the question here first.
For now we are recommending our customers, to keep with Java Update 18 (Last working version),
but it's becoming a bigger issue, since more and more customers are trying to update to the latest version.
Regards.

lizaro wrote:
..Can someone give any light on this issue?
For me it look very clearly like another bug related the first fix, but I wanted to pop the question here first.Normally I would ask a lot of questions and demand more evidence before thinking of agreeing to such an assessment, but you seem to have put in the research needed to cover most of that.
There were some recent (last month or three) reports of broken cache management, but AFAIR they were supposed to be fixed by update _20. Try update _21, and if that does not resolve the issue, raise a bug report with Sun.

Can Outlook 2013 cached mode disabled work offline?

Hello
I would like to please someone help me to resolve a concern. I have a client Outlook 2013 cache mode disabled by policy, however when you need to open Outlook without connecting to any network, is not possible and a message that the server is not online.
Is there a way to change this behavior and that an Outlook client that has disabled the cache can work offline?
Many thanks

Hi
No, that is what cached mode is used for.
You can use OWA offline if you are disabling cache mode with policy.

L3 Cache Always Disabled after Boot

Hi
I hope someone can help.
Basically I have only noticed this in the last few days. I had thought a few of my audio applications were showing more cpu use and thought I was losing the plot.
But when I check in the preferences - processor, the 1MB L3 Cache always shows disabled. At first I thought my hardware had broke but I can enable it if I go into the preferences and manually do this. But I have to do this everytime I start up ..this never happened before, how do I get it to stick?
I have checked the cache is working correctly and all reports were good.
I dunno what to do now..Please Help.
Thanks
Daryl

Its just happened again..I've managed to figure out whats causing the problem but not why its happening (10.4.7)
The power management in osx has started acting up . I think its OSX 10.4.7 broken something, because its just started happening since then (hardware tests ok).
The battery is alive but it stops getting charged, L3 cache gets disabled (reduced mode) and the battery meter keeps trying to calculate and is stuck wasting cpu cycles.Performance has gone out of the window.I am doing audio work so noticed straight away and just thought ... not again.
Apple fix this please. 10.4.7 seems to have some serious issues (I've been lucky up until now)

"Disable Bad Name Cache" and "Disable Bad Address Cache"

hi,
on some issues it helped to deactivate "Disable Bad Name Cache" and "Disable Bad Address Cache".
Where/ how can we set these options for zcm 10.3 agents?
thx,
hugo

Those are Novell Client settings not ZCM Client settings.
On 4/4/2012 1:16 PM, susehoush wrote:
> "Disable Bad Name Cache" and
> "Disable Bad Address Cache".
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Navigation is cached - even when navigation cache is disabled?!

I seem to have a problem clearing the navigation cache. Whenever I change a role of workset in the PCD, the change is not visible until some time has passed (perhaps 100 minutes, I will try to verify that).
If I change a page (like inserting a new iView) the change is visible immediatly.
This sounds like a fairly standard "flush the navigation cache" problem, but that does not solve the problem. I have disabled all the caches in "System Administration -> Navigation -> Navigation cache" and have also cleared all of them just for good measure.
I have used Firebug in firefox to verify that this is not a browser cache problem. For example I have a folder in the role that contains two pages. I add a third page, flush all browser caches, close the browser and reload the page. In firebug I can see that I get a "200 OK" response that only includes the original two pages - not the new third page.
I have also tried clearing the PCD cache in "System Administration -> Support -> Portal Content Directory -> PCD Administration -> Release cache". When I do that I can see (again with firebug) that the request is taking slightly longer the first time (around 300ms instead of the usual ~70ms). However, the new page is still not visible.
The only thing that help (besides waiting) is to restart the entire portal. The changes are then visible immediatly.
I have even tried clearing the HTTP cache, which also does not help.
What other caches could there be besides the navigation cache, the PCD cache, the HTTP cache or the browser cache? How can I debug this problem further?
Thanks in advance.
Best regards,
Ole Hyldahl Tolshave
P.S. We use SEP EP 7.00 SP21
Edited by: Ole Hyldahl Tolshave on Jun 17, 2010 10:21 AM

Hi Tobias,
I tried clearing the DB cache (by using /irj/servlet/prt/portal/prtroot/com.sap.portal.prt.cache.PRTRegionDBClear). No change (change to role is still being cached).
I used the PCD Inspector and verified that the contents are identical to what I see in Content Administration -> Portal Content (which is different from what is rendered in the top navigation and detailed navigation).
We only have one server node running.
I tried deploying the .PAR-file from SAP support (and restarted). This made no changes so now I am waiting for them to get back to me.
But thank you again for trying to help.
Best regards,
Ole Hyldahl Tolshave

Remote handle caching error when using HTTP session replication

 Using WL 7.0 Sp2 on Solaris, deployed apllication on a 2 instance wide cluster.Code
 attached -
 unzip testapp.zip to find a test.jar which is the stateless sesion ejb and test.war
 which is the applicaiton.
 I have this class - TestDelegate that looks up a stateless session EJB(TestEJB),
 and puts the remote handle as a member variable(Test bean).Test.jsp instantiates
 this delegate(TestDelegate ), and then via setAttribute puts the TestDelegate
 in the HTTPSession.Then it calls a couple of methods via the TestDelegate which
 has the remote handle of the TestEJB.
 Scenario 1 : We deploy the WAR on cluster A which is 2 instance wide,we deploy
 the TestEJB on
 cluster B, which is also 2 instance wide. All works fine, the delegate is able
 to lookup EJB and
 can add the remote handle as a member variable.
 Scenario 2: We deploy the WAR on cluster A which is 2 instance wide,we deploy
 the TestEJB on
 cluster B, which is also 2 instance wide. This time we put a weblogic.xml in the
 WAR which has tag for in-memory session replication.This time we get class cast
 exception for the same sequence that we have above.
 <Mar 24, 2003 10:43:28 AM EST> <Error> <kernel> <000802> <ExecuteRequest failed
 java.lang.ClassCastException: Assigning instance of class com.TestEJB_1jsmq_EOImpl_WLStub
 to field com.bean.TestDelegate#bean
 Start server side stack trace:
 java.lang.ClassCastException: Assigning instance of class com.TestEJB_1jsmq_EOImpl_WLStub
 to field com.bean.TestDelegate#bean
 at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2266)
 at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
 at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
 at java.util.Hashtable.readObject(Hashtable.java:794)
 at java.lang.reflect.Method.invoke(Native Method)
 at java.io.ObjectInputStream.invokeObjectReader(ObjectInputStream.java:2209)
 at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1406)
 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
 at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2258)
 at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
 at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
 at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
 at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:140)
 at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:91)
 at weblogic.cluster.replication.ReplicationManager_WLSkel.invoke(Unknown
 Source)
 at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
 at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
 at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:821)
 at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:308)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
 End server side stack trace
 [testapp.zip]


To see the list of session IDs in the cache you can iterate over the keys of the cache returned from the following code:
NamedCache cacheCatalog = CacheFactory.getReplicatedCacheService("$FilterService$").ensureCache("CoherenceSession.CATALOG", getClass().getClassLoader());Then to see the contents of a session you can take a look a the cache returned from the following code:
String sId = // keys from cacheCatalog
NamedCache cacheDetails = cacheCatalog.getCacheService().ensureCache(sId, getClass().getClassLoader());Hope this helps.
We have received your request for a development license and we hould have ti out to you today.
Later,
Rob Misek
Tangosol, Inc.
Coherence: Cluster your Work. Work your Cluster.

I can't click the buttons in youtube videos. I've tried clearing the cache and disabling all the extensions and add-ons. No dice. The videos work in IE.

See above. Video will play automatically if on youtube, but I can't pause it, etc... Also if the video is embedded in a different website, I'll click play and nothing will happen.
Have tried clearing cache.
Have tried disabling add-ons and extensions.
Nothing works.

check for adobe flash issues
* kb.mozillazine.org/Flash

Cache Refresh disabled in SXI_CACHE

Hi all,
I am trying to refresh xi cache using transaction SXI_CACHE, but the menu entries for "complete refresh" and "delta refresh" are disabled. Does anyone know how to enable these menu entries? my user has all the SAP_XI* roles assigned.
Thanks!
Hart

Hi,
Integration Engine & BPE resides in ABAP Stack.
While Adapter framework and SLD resides in Java Stack.
Cache is a collection of most recent objects in use(Similar to Cache memory).
The System architecture of Netweaver is framed in such a way that as soon as you activate the objects in IR or ID they are automatically reflected in the memoy(which is known as Cache refresh).
But sometimes itsnt reflected, in that case use the transaction code:SXI_CACHE to refresh the cache mannually.
Hope this will help you .
Regards
Sushama

RE: Cache Link Disabled

Hello,
In my BI Admin Tool, under the Manage option, I have Jobs, Sessions, Cache, Clusters, Security etc. Most of them are enabled but the Cache Link is disabled. I would like to look at the Cache Manager and I can't.
Any reason why it is disabled?

I just checked it. I indeed had to change the setting Cache=Yes in the NqsConfig.ini file.
Cache link is enabled now
Thanks
rkingmdu

Animated .gif has dither on bitmaps even if disabled

I'm trying to create an animated .gif from Flash Pro.
I set from Publish window to export a animated .gif with Smooth, with a custom Palette made in Photoshop (because default palette settings generate an awful result...) and with Dither set to none.
The problem is that the reuslting .swf is perfet but the .gif has background bitmaps (bitmaps with no transparency, positioned below bitmaps with transparency) dithered with any setting I tried, the only mode I've found to remove the dither is to replace the bitmap with a vector image made in Flash.
I already set the bitmaps as loseless png/gif, not jpg.
I'm on CS5.5, anyone has a fix for this bug or a suggestion?

Hi Jean
I'm guessing that the palette solution offered by P_SJ
doesn't apply to FireWorks? I'm not a FireWorks user, so I'm really
not sure what that means. Other than perhaps referring to what I
know as a transparent background color.
Maybe try setting a background color to what your background
is in Captivate?
Cheers... Rick

Can the email attachment image cache be disabled?

I receive email with attached images from a security system with four cameras on a detected alarm event. No problems before update to ios 5. Now the first attachment image received becomes the default image for all camera emails. If I delete the first alarm email, power cycle phone, the next email attachment image becomes the default image. All images are time stamped jpg so no duplicate names to cache on. Because I use Imap, I can go to other computers and the images are correct on those machines. I have another different system that emails attachment jpg images that come through correctly. Only those images are slightly larger in size. 30k versus 19k for the problem emails.

Same problem on ipad mail. Received 5 emails with each one different photo. Imap zimbra mail client shows each photo ok, ipad shows always the same photo. Cache problem ? Moved the files to different imap dirs, reboot ipad, played with options ... No workaround. How can we submi a bug report ?

Raid Cache Vol Disabled

Hi, I have a problem here. Every time I start my computer, it appears with white letters and black background.. saying some things, one of them is that my RAID Cache_VOL 18.9GB is disabled ? disabled is in yellow color... something is wrong.. how to fix?
I have Toshiba Satellite U840-10m
Thanks in advance

See if a BIOS update changes anything.
Toshiba BIOS Update,1.60-WIN, 19/09/12
How to update the BIOS on Toshiba notebooks
-Jerry

Remote bitmap cache is disabled

Similar Messages

Maybe you are looking for