Remote code for Yamaha amp

Hi
I'm trying to find a code (or a way) to program the Youview remote to do volume on my Yamaha amp (HTR-2866)
I've tried the 0708 code for tvs but no luck.
Anyone managed to do this?
Thanks in advance

Try http://helpforum.sky.com/t5/Archived-Discussions/setting-sky-remote-to-operate-av-receiver/m-p/830248#M5209

Similar Messages

XR2 Remote codes for Yamaha RX-677

The listed codes 30176, 31176 don't fully control the Receiver. 30176 does control the volume but doesn't turn off or on the receiver with the "All Power" button. Any other possible codes?

Hello SteveM412,
Try these - 10030, 10019, 10797, 11407

Sky Remote Code for JMB 42883

Looking for a sky remote code for my LCD JMB 42883, tried all the codes available for JMB and they don't work.Does anyone know what the correct code is?

I have JMB 24883 FULL-HD LED TV and have tried all remote codes off Sky, none worked. Big issue had was watching video demo AFTER attempting the codes which resulted in the last code entered displaying (off supplied list).I.E. in video it says to press TV, hold Select and red until flashes then type 990..1234, 1-1st digit, 2-2nd digit etc BUT having tried the supplied list this method just flashes the last entered remote code off that list!!How to reset?

HT3176 What is the numerical remote code for the apple remote? I would like to program another manufacturers remote to control my iPod dock

I would like to control my iPod doc with my Denon remote. Does anyone know he numerical remote code for an apple iPod doc?

Hi kwg06516,
This remote(RMT-B126A) doesn't have programmable codes because its not a universal remote. It is exclusive for your player(BDP-S3200) only. It may control other devices such as TVs but with the same brand only.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Sky+ Remote Code for Bush LED40127FHDCNTD 40" Full HD LED Smart TV (Rev 9 Remote) [Working]

Hi, I wanted to pass on a code that I found that worked with the Bush 40" Full HD LED Smart TV (LED40127FHDCNTD) (Argos item number 128/1684). I tried a few codes from a round the web but found 0065 to work with this model with a Rev.9 Sky+ remote. For the sake of completeness here are some of the other codes that I tried without success: 2060, 1354, 2155 (from the Sky Remote page) , 2242,1613 and 2153. Hopefully this might help someone out there!

Hi,I'm looking for the Sky+ Remote Code for the same Bush TV (LED40127FHDCNTD) but I have a Rev 10 Remote. It does not give me a Rev10 option when I try looking for the code on system....day26 wrote:
Hi, I wanted to pass on a code that I found that worked with the Bush 40" Full HD LED Smart TV (LED40127FHDCNTD) (Argos item number 128/1684). I tried a few codes from a round the web but found 0065 to work with this model with a Rev.9 Sky+ remote. For the sake of completeness here are some of the other codes that I tried without success: 2060, 1354, 2155 (from the Sky Remote page) , 2242,1613 and 2153. Hopefully this might help someone out there!

Remote code for my sound bar

My manufacture (Seiki) is not listed. How can I get the remote code?

you would have to have a four button device remote control, which is only offered for sale at verizon online store
FiOS TV Remote Control (2 Device)
$11.99
Order Now
Here is the manual, I would check if they have a code for the
To find remote codes for your equipment, select the device type you are trying to set up:
TV
DVD
VCR
Audio Amplifier
Audio Receiver

Remote Code for Sky Remote rev 9 to Yamaha rx-v363 surround amp

Hi, I've just replaced my old Sky remote as the '0' stopped working. The old remote worked absolutely fine with my Yamaha amp. I've tried all the Yamaha codes suggested (0171, 0876, 0382, 0204, 1304, 0740, 1359, 0214, 1843, 2049, 2089, 2144, 2370 and 2365) but to no avail. The code I've been using on the old remote was given to me through this forum around 3 years ago but I cannot find the original thread. Does anyone have any additional code suggestions or know if it's possible to obtain the code from my old remote? I've done this previously with another remote by counting the number of LED flashes, however, I've been unable to find anything that would suggest this is possible via a Sky remote. Thanks

Try http://helpforum.sky.com/t5/Archived-Discussions/setting-sky-remote-to-operate-av-receiver/m-p/830248#M5209

IMac Remote Code for DishTV Remote

Hi All,
I am using a new iMac as TV monitor via the EyeTV Hybrid input. Everything is working well except that I need to program my Dish remote to control the volume of my iMac.
Before I embark on the lengthy code discovery process, does anyone happen to know what the Dish remote programming code is for the iMac monitor?
TIA,
Josh

Unfortunately, if you use all of the given device codes as well as the code search option, then you've pretty much gone through every code in the remote. There are over 300 codes, so you could try again in case you accidentally bypassed the correct code. There's also the possibility that the remote is defective, but if you have no trouble controlling other devices, then that makes it less likely.
If you have a 2nd remote for a 2nd STB you could try that and see if the trouble replicates. If you don't have a 2nd remote, you can obtain a replacement remote through the In Home Agent on your PC or Set Top Box. It can be downloaded here:
http://www22.verizon.com/residentialhelp/inhomeagent/?CMP=DMC-CV090262
Try the setup with the 2nd remote, and failing that, then it just means the remote does not hold a code for that device. I realize the 2 devices are from the same manufacturer, but they are 2 separate products, produced for 2 different services. Any question as to why the 2 are not compatible would have to be directed toward Philips.

Why won't SKY come up with remote codes for Seiki tv's especially when charging a fortune for SKY

I wish someone could tell me why no remote codes are not available for Seiki tv's instead of coming up with excuses.

Like all new kit, it takes time for the codes to be shared and then programmed into remotes.The Sky Remote has a database of known television codes.Each TV has a group of codes to control the different functions of the TV.Sky develops sets of codes for each TV manufactured and then applies its own code to the control set.The Sky code is what you need to program the Sky remote so that it uses the control set for the selected TV. Each Sky remote is programmed with updated code databases when it is manufactured and to keep track of what remote does what, it is given a Rev number found inside the battery bay of the remote. In the case of Seiki, the code set was not incorporated by Sky until Rev 10.Anything earlier will not work unless by sheer chance it matches the code set of another TV.

Remote code for XBox-360?

Does anyone know the 4-digit code (if there is one) to program into the remote?
I use the XBox to watch DVD's (HDMI), and I'd like to use the TV remote to do so. Thanks!

Unfortunately, if you use all of the given device codes as well as the code search option, then you've pretty much gone through every code in the remote. There are over 300 codes, so you could try again in case you accidentally bypassed the correct code. There's also the possibility that the remote is defective, but if you have no trouble controlling other devices, then that makes it less likely.
If you have a 2nd remote for a 2nd STB you could try that and see if the trouble replicates. If you don't have a 2nd remote, you can obtain a replacement remote through the In Home Agent on your PC or Set Top Box. It can be downloaded here:
http://www22.verizon.com/residentialhelp/inhomeagent/?CMP=DMC-CV090262
Try the setup with the 2nd remote, and failing that, then it just means the remote does not hold a code for that device. I realize the 2 devices are from the same manufacturer, but they are 2 separate products, produced for 2 different services. Any question as to why the 2 are not compatible would have to be directed toward Philips.

Remote code for Logik L32HE15

Looking for a code for my replacement TV tried 2135, 1893, 2056, 2123, 2060. How often are codes updated?

You don't seem to have included the codes from Sky's remote code finder here: http://sky.uebv.com/ so have a look here first.

Remote code for Philips 231T1SB/00 TV

Hi, I've tried lots of Sky codes from Sky and this site with no success. Also reset the remote and getting nowhere. My remote version is 8R, Hope someone can help.... Thanks

This is the message i get from the Sky remote codes website .
"We have an exact match for your TV model, but this code is not stored on your version of the Sky Remote control. You will need to upgrade to the latest version of the Sky Remote Control to use this code. "

Remote code for Bush BLCD32H8

I have been through all of the remote codes that BT have provided for Bush and none seem to work with our model of TV
Bush: BLCD32H8
Any ideas?

Hi michellebebb,
Welcome to the forum and thanks for posting. There are a few codes that should work with that particular model. Can you try 0009, 0065 or 0443? Let me know if that helps.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Remote Code for GPX

I have a GPX TV/DVD that isn't able to be programmed to the remote. Is there anyway to find a code that works?

Unfortunately, if you use all of the given device codes as well as the code search option, then you've pretty much gone through every code in the remote. There are over 300 codes, so you could try again in case you accidentally bypassed the correct code. There's also the possibility that the remote is defective, but if you have no trouble controlling other devices, then that makes it less likely.
If you have a 2nd remote for a 2nd STB you could try that and see if the trouble replicates. If you don't have a 2nd remote, you can obtain a replacement remote through the In Home Agent on your PC or Set Top Box. It can be downloaded here:
http://www22.verizon.com/residentialhelp/inhomeagent/?CMP=DMC-CV090262
Try the setup with the 2nd remote, and failing that, then it just means the remote does not hold a code for that device. I realize the 2 devices are from the same manufacturer, but they are 2 separate products, produced for 2 different services. Any question as to why the 2 are not compatible would have to be directed toward Philips.

Remote code for Westinghouse LD-4055?

I've tried all the code in the documentation to no avail. Using the search method got the remote to *mostly* work, with the notable exception of the mute button (which does nothing) and the Input button (which mutes the TV). If I could just get the input button to work, I could ditch the original remote entirely.
Thanks for your help!

You can always try the search feature which takes a bit of time, but will find any code for any TV.The directions for comcast remotes is below: If your home entertainment device doesnot respond to the remote control aftertrying all of the codes listed for yourbrand, or if your brand is not listed at all,try searching for your code. For example, after trying all of thecodes for your TV, you still cannot getthe remote control to operate your TV,then:1. Turn on your TV.2. On the remote control, press TVonce. Then press and hold Setupuntil the TV key blinks twice, thenrelease Setup.3. Enter 9 - 9 - 1. The TV key willblink twice.4. Aim the remote control at the theTV and slowly alternate betweenpressing Power and TV. Stop when the TV turns off. Aworking code has been found.NOTE: In the search mode, theremote control will send IR codesfrom its library to the selected device,starting with the most popular codefirst. 5. Press Setup once to lock in thecode.The TV key will blink twice.6. To search for the codes of anotherdevice, repeat steps 1 to 5, butsubstitute the AUX key for the auxiliary device you are searching for

Remote code for Yamaha amp

Similar Messages

Maybe you are looking for