Remote comparison RFC Dest

Hi,
my system is solution manager 7.1 the last stack
ST-PI 05
when i use in CDMC i get the results i want to try - remote comparison,
when i click on the remote comparison i need to choose RFC dest,
i get a list of rfc that i dont understand from where the solution manager gets it,
also when i try to choose RFC i get the Error
"RFC destination different from destination system"
I find the note 1636163 but it's not compatible my system my ST-PI
Best regards
Naor Shalom
Edited by: Naor Shalom on Feb 2, 2012 9:27 AM

Gyula,
I believe it is all controlled in SM59 where you can set the login id and password as trusted. Whe you call this function module remotely from your program, the logical destination system set in SM59 probably not set as trusted.

Similar Messages

  • How to add Target System to Remote Comparison in Version Management

    Hello,
    We have defined an RFC connection from System A to system B. We want to use system B for remote comparison or programs from system A. However, when we choose (from SE38):
    Utilities -> Version Management -> REMOTE Comparison -> Target System
    system B does not appear in the list.
    How can we add system B to this list?
    Thanks and Regards.
    Reena

    go to the object which u want to compare
    go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
    and next press compare
    hope it will work
    cheer
    s.janagar

  • Remote comparison between systems on a table

    Hi All,
    I would like to do similar thing I can see in the program version control remote comparison, but for tables contents. I found an RFC "TABLE_ENTRIES_GET_VIA_RFC" which can be used for this. Nevertheless, do you have any other suggestions which do not use logon procedure if it's not necessary(like in the program version control)? Thanks for your help in advance. 
    Regards,
    Gyula

    Gyula,
    I believe it is all controlled in SM59 where you can set the login id and password as trusted. Whe you call this function module remotely from your program, the logical destination system set in SM59 probably not set as trusted.

  • Rfc dest

    hi ,
    1. if i am doing only a file to idoc scenario do i need a rfc dest from SAP to XI
    if yes why??
    2. if i am doing a idoc to file scenario do i neeed rfc dest and port from XI to SAP
    if yes why??

    for file to idoc check:
    http://wiki.sdn.sap.com/wiki/display/XI/FileToIDOC
    for sender IDOC check:
    https://wiki.sdn.sap.com/wiki/display/XI/SAPR3IdocsToXI--Steps+Summarized
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660?quicklink=index&overridelayout=true

  • Regd. Creation of Port and RFC dest in PI

    Hi Experts,
    I have two scenarios 1. file to IDOC and 2. IDOC to file.
    for first , i need to connect to ECC for posting IDOC. in sap side they have created port ,partner profile etc.
    in PI sides i created an RFC destination(sm59) ,given generic name, i have created port(idx1) and mentioned the partener num say(SAP123) ant type (LS). Loaded the meta data in idx2. i am able to post IDOC in sap.
    for the second case,i am supposed to receive idoc from sap.
    do i need to create another port and rfc destination ? or simply adding the metadata in the prev created port will help.
    Actually i tried creating another RFC dest and port and was trying to assign same partner num (SAP123) and type (LS)
    while loading the metadata i get an error saying 'basic type of the IDOC is unknown'.
    from SAP side the IDOC status is green , saying idoc is dispatched to the target port.But in Trn. SE58, there is error show.
    Is this something wrong in PI or SAP ?
    Please help me with the steps to be followed with suggested naming conventions if any.
    Best regards,
    Srinivas

    Hi,
          Port type shouldbe SAP SYSID ...it is important that you create the port with this naming convention as the name is very important to be followed...
    Try to create the port name with the above mentioned..and give a try...
    Also post the error generated in the SM58 ...
    HTH
    Rajesh

  • Connect Webmethods Flowservoce using RFC Dest Type G

    Hello Friends,
    For my scenario i need to send Material Master Idoc to Webmethods, the idoc is received by a flow service written in Webmethods developer.
    now I am strucked at RFC destination i am trying to create TYPE G connection, here what value i need to enter for "Path prefix " .
    We want to connect directly using RFC Dest with out using any adapters.
    appreciate any help (Information / blogs.....)
    Regards
    Satish

    Tuhin Kumar Oza,
    Cud u plz go through the following link,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/9cdb4064da712ae10000000a155106/content.htm
    see the table under the head procedure.
    See the Path Prefix entry against System Landscape Directory.
    Reg,
    -Naveen

  • TCP/IP RFC dest entry not displaying in we21

    Hi Experts,
    i have created an RFC Destination in sm59 with connection as TCP/IP.  In we21 when i try to assign the RFC dest to the tRFC port, the dest entry was not displayed.   No RFC dest belongs to TCP/IP connection was displayed there.
    Please give your input for the cause of the issue.  
    Thanks,
    Siva

    Go back to SM59 and see whether you save the new connection and its displayed there ?
    Thanks
    Prince Jose

  • Change of RFC dest during Create BP via DSWP

    Dear all,
    I'm creating Business Partner via Tcode DSWP. Where in the screen "Create Business partner" got to know there are Satellite system being attached on the tree in left hand.
    My questions:
    1) may i know how can i perform the config if i want to edit/delete/add the system?
    2) How can i assign the RFC dest accordingly each of the system?
    Please comment.
    Thanks in advance.

    My Answers:
    1.) The creation of Business Partners along with their associated system, system identification number, and user ID is maintained in Transaction BP.
    In Transaction BP select the button "Person" to create. Go to the Identification Tab. In the Identification Numbers area you will need to add entries for every system/client combination you want to create messages for.
    In the IDType column  Choose CRM001
    In the Identification Number column maintain the entries as follows:
    <System> <Installation Number> <client> <UserID>
    For example: PSM 0005063405 300 RGODFREY
    So, if you want to edit/delete/add systems that are mapped to business partners you may do that here.
    2.) RFCs are required to be generated before creating business partners in BP. This is performed in transaction SM59. Once the RFS are created and generated in SM59, you are free to add/edit/delete the systems according business partner.
    Award Points.

  • Naming of RFC Dest SAP R3- XI- Partner

    Hello,
    I want to send an Idoc via XI to different external partners. I know how to setup the RFC dest from R3 to XI and so on...
    The question is the following:
    How do you name your RFC Destinations in R3 system?
    One for each external (the final receiver of the Idoc) or is it recommended to use the XI system as destination for all
    How to handle ALEAUDIT messages...seems the better way to name the final partner...
    what are the suggestions...
    Thanks for your ideas,
    bye
    jo

    Hi,
    If you are going to be doing an IDOC to IDOC then by  naming the partner as your R3 systems then you do not need to manipulate your Idoc's control record in XI.
    If you did this wrt to XI, then the IDOC control record will have R3 as sender partner name and XI as receiver partner name... When XI send s the IDOC, the control record will need to be maniuplated with XI as the Sender Partner and R3 as the receiver partner.
    I hope this clears the concept. I would recommend naming it( paretner profile ) with respect to the actual partners
    The port / RFC destiation can be named with respect to XI and used in the partnerinside the partner profile.
    Regards,
    Bhavesh

  • RFC_SENDER_XI : RFC Dest Error

    Hi All
    I am configuring the RFC Destination on the ECC6 of typer TCP/IP to communicate RFC to XI, when i create the RFC destination RFC_SENDER_XI of type TCP/IP i am getting error
    Error Details     SAP gateway connection failed. Is SAP gateway started?                    / CPIC
    Error Details     ERROR: SAP gateway connection failed. Is SAP gateway started?
    Error Details     LOCATION: SAP-Server eccserv_EC6_01 on host eccserv (wp 0)
    I have configured the RFC Sender Adapter and i am using the same PID of RFC Sender in my RFC Dest, the RFC destnation is throwing error when i mention the host name of ECC in Gateway host.
    Any clue where is the problem, how should i activate the gateway host on ECC, is there any such thing to activate gateway host also when i run TCode SMGW on ECC i am not able to see any active connectiions there.

    Now i am getting the error on the RFC_SNDR Adapter
    Error Details:
    Error: 2007-08-07 11:02:26 GMT+05:30: com.sap.aii.af.rfc.afcommunication.RfcAFWException: senderAgreement not found: lookup of binding via CPA-cache failed for AdapterType RFC, AdapterNS http://sap.com/xi/XI/System, direction INBOUND, fromParty '', fromService 'ECC_SERVER', toParty '', toService '', interface 'ZMK_TEST_RFC', NS 'urn:sap-com:document:sap:rfc:functions' for channel 'CC_RFC_SNDR' (channelId 389e1dc5421a32b5a336160fb15d71eb)
    I have done the cache refersh still getting same error

  • RFC Dest. Parameters for ALIEN Device Integration?

    hi,
        I am trying to Integrate Alien Device to SAP AII.
    In RFC dest.  ALE_OUT   
       HOST: ip address
       service/port : 23
       path : /
    but I am getting an " ICM_HTTP_CONNECTION_FAILED" error.
    thanks,
    arul.

    hi,
        I am trying to Integrate Alien Device to SAP AII.
    In RFC dest.  ALE_OUT   
       HOST: ip address
       service/port : 23
       path : /
    but I am getting an " ICM_HTTP_CONNECTION_FAILED" error.
    thanks,
    arul.

  • RFC dest . parameter Problem

    Hi Friends,
    I am getting a problem when i restore the Source system.
    No RFC dest.parameters maintained for the
    Warehouse in source system BQACLNT100
    When i am asking my basis team to checck for the connection in the source system they are telling that connection is working fine
    Please help me to solve this problem
    Regards
    Raju

    hi Raju,
    it seems authorization problem,
    oss note 126066, old one but may relevant, it's said ALE user (ALEREMOTE) is missing an authorization in the source system - BQACLNT100. what's your r/3 version.
    you may have higher version, but still try to check authorization area.
    Cause and prerequisites                                                  
    The error message can have two causes:                                                                               
    1.  The user ALEREMOTE is missing an authorization in the source system  
        (only for systems as of Release 4.0B)                                                                               
    2.  The field "Application server" carries out a conversion to upper     
        case in the dialog "automatic connect" (only for source systems on a 
        UNIX operating system)                                               
    Solution                                                                 
    Solution for 1:                                                          
    Join the profile S_BI-WX_RFC in the source system to the authorization:                                                                               
    Object:        S_ADMI_FCD                                                                               
    Authorization: S_WF_RFCDEST                                                                               
    Value:         NADM

  • Remote enabled rfc

    hi gurus,
    may i know is there any t-code which i can list out all of processing type = remoted enabled rfc? not the normal function modules.
    please kindly advise.
    thanks alot.

    Hi,
    You can check the list of Transitional RFC.
    Run T-Code SM58  Change  the username to * and click on Execute button on top or press F8
    Regards
    Hiren K.Chitalia

  • CPIC-CALL Transaction program not registered Error while creating RFC Desti

    Hi All,
    I am trying to create a new RFC Destination.
    Details I have provided are..
    1.RFC Destination Name
    2.Connection Type - TCP/IP
    3.Description
    4. Activation Type - Registered Server Program.
    5.Program Id.
    6. Gateway Host and Gateway Service.
    But When I Test the connection, I am getting the following error.
    <b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
    However I was able to create and connect RFC Destinations successfully previously.
    I am not SAP guy. Could someone help resolve this issue.
    Thanks,
    Phani

    hi Sekhar,
    I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
    User: CRREMOTE (Client: 071)
    Destination: OCR (handle: 1, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
    CPIC-CALL: 'ThSAPECMINIT'
    Transaction program not registered
    DEST =OCR
    HOST =%%RFCSERVER%%
    PROG =dpssrfc
    Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
    3 804778
    resize I/O buffer to 28000 bytes
    >>>> [2] MQ_LINK      : TCP  <ac: 3> K %%RFCSERVER%% >>> OPEN
      {45632F14-288E-0046-0000-0000A888A7AA}-
    ======> CPIC-CALL: 'ThSAPECMINIT'
    can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
    Awaiting your reply,
    Thanks & Regards,
    Yogesh

  • Reading UWL item list in a Remote Function (RFC)

    Hello Experts ,
    I have a workflow scenario running on my ECC box.I would like to know all the tasks that are running on a particular user name....and I want to expose this functionality as a remote function.
    Do we have such RFC out of the box or do we need to build from scratch ? If needs to be built, can you guide me how to do that  ?
    Let me put this other way.....I want to read all the items in my UWL. Do we have any ABAP APIs for doing this ?
    Thanks, Anil

    Hi,
    Try using FM SWN_UWL_GET_WORKLIST
    Regards,

Maybe you are looking for