Remote configuration tool.

Dell has a downloadable tool called: DCCU Dell Client Configuration Utility. When you run this it lets you create an exe file that can be run on any Dell machine to make changes to the BIOS settings. I used it with a remotely deployed script to enable the Wake on Lan setting in the Bios. I was hoping IBM or Lenovo might have something similar. Some sort of remote management software for enabling Wake On Lan. I read a little about LCCM: LanClient Control Manager but none of its links are active anymore. Any help or redirection would be greatly appreciated.

Hi,
try this link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70569
Download the file called scripts.zip using that you can configure the system.
Start the file called: "ListAll.vbs" => it will show you all the configuration, that is set; In the same time it will show you the name of the Wake on Lan script, that you can use to configure the systems.
Use the file called "SetConfig.vbs" in conjuction with the name and the configuration that you want to have on the machine.
Example:
SetConfig.vbs %nameOfTheProcess% Disabled
This configuraition is different by couple systems, so it would help, if you can tell me, what all systems will be changed using this configuraiton files?
NOTE: This files can not be distributed to end clients, as the missuse of them might root into unexpected behaviour.
Rgrds

Similar Messages

SAP Configuration Tool

I need to make few changes in UME properties for that I need to use/access SAP Configuration Tool. I need to know who (usually) have authority to access the same i.e. Basis, Consultants, ICT Lead etc.
Config Tool - Administration Manual - SAP Library
Any help in this regard would be highly regarded.
Thanks.

Hi Sean,
Every Java instance 7.0 has Config Tool under this path (In >7.3 this tool in web based):
/usr/sap/SID/JC<instance number>/j2ee/configtool
You could get configtool folder to execute this tool remotely. You must configure hostname & port. You will need user administrator credentials.
From my understanding, common scenarios to have access to this tool:
- SAP Basis administrator / SAP NW Portal developers (Customer's employees)
- SAP Basis consultants / SAP NW Portal consultant (Depending on customer rules or if customer have outsourced administration to services partner).
Hope this helps,
Kind regards

Difference between EEWB - UI Configuration Tool - AET

Hi Folks ,
I needed some clarity on the difference of EEWB - UI configuration Tool and Application Enhancement Tool .
Will be gre8 and if any one can explain me in detail.
Thanks in Advance
Regards,
Amrita
Edited by: Amrita Amrita on Mar 27, 2011 9:13 PM

Hello Amrita,
Following are the differences and points how AET is different from EEWB:
AET is a UI Framework tool that is used by application to enhance their application DB and BOL structure
AET only creates field in CRM system. It does not create any field in remote system and does not do any synchronization.
AET lets you define dropdown list boxes for custom fields
AET allows you to translate field labels and entries in dropdown list boxes.
For documentation, click [http://help.sap.com/saphelp_crm70/helpdata/EN/20/b0f4f819e844df9f47bc9c70c795f4/frameset.htm|here].
Hope this helps.
Thanks
Vishal

PowerPivot for SharePoint configuration tool validation failed

Validation fails when I run the PowerPivot for SharePoint configuration tool. I've set up a virtual machine with Windows Server 2008, SQL Server 2012 (with SP 2) and SharePoint 2010. The firewall is completely turned off (temporarily).
The SQL Server service is running (so is SQL Server Browser). TCP/IP and Named Pipes are both enabled (disabling one or the other doesn't solve the problem). Remote connections are enabled. The services have been stopped and restarted every
time I make a change to something. Still getting the following error. Can anyone help? Thank you in advance!
Cannot connect to the database server instance. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and
that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

Solved it. I used the IP address as the server name, instead of using the standard naming convention.

Oracle 8i Configuration Tools Fails on Install

I found problems on the Oracle 8i Installation, on my Windows XP Desktop (SP1). I've selected the Minimal Installation, and all goes on. When they reach the Configuration Tools Section of Setup...
It found the following fails:
- Net8 Configuration Assistant, fail:
Class not found: Files\Oracle\Ora81\network\jlib
- Oracle Database Configuration Assistant, fail:
There is no available output for this tool.
Apparently, it doesn't create the Starter Database (my main need). I'm newbie in Oracle Database world (I'm MS-SQL Server DBA), so, if anyone can help me, I'll be glad...
Thanks,
Rafael

Please turn on the debug trace in tip.properties
Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
b2b.oracle.tip.DiagnosticLevel = DEBUG
oracle.tip.LogType = text
If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
Please gather as much trace information as possible when you start the B2B Server manually.
If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
Then use the following command to start B2B:
opmnctl startproc process-type=B2BServer
Thanks,
Eng

ID: How to use the test Configuration tool

Hi all,
I have done one simple file2file scenario and it is working fine( source file is reaching the destination).
By using this scenario, i would like to know the use of test configuration.( which is in Integration Directory).
I have given the input parameters what it has asked.
Header details:-
sender service,sender message interface and namespace.
payload:-
xml format( taken from message mapping)
log result:-
Sender Agreement
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://xxxxx:8000/sap/xi/simulation?sap-client=000 User: XIDIRUSER
Please help me how to work with this tool.
Regards,
Deviprasad.

hi deviprasad...even i face the same problem whenever i tried using test configuration tool...
i think it means...its trying to make a connection : HTTP connection to ABAP Runtime ......which fails due to lack of proper authorization...
if u login to ur integration builder with a user having the proper authoriztion(i dont know exactly)...u can do the test..... coz during the test there is a connection between java and abap stack...
pls rectify me and convey me if u get the proper answer....or if i m wrong..
pls try to do use the test after login to IB through a user with maximum authorization....

Dynamic Configuration Tool Issues

Hi,
Has anyone run into issues with the cisco dynamic configuration tool? I recently noticed I cannot customize the hardware I am trying to configure. This was not like this in the past.

Hi Laurence,
According to your description, you are creating a SQL Server Reporting Services report using SSAS cube as the data source, there are 40 parameters in the MDX query, so the performance is poor, right?
In your scenario, you said that 10 of the parameters using existing function, so you suspect that the issue can be caused by the existing function. Based on my research, it seems that the existing function is not a problem. Only issue is that use existing
function together with nonempty function, please refer to the link below to see the detail information about it.
http://cwebbbi.wordpress.com/2009/03/31/existing-and-nonempty/
In additional, I'd suggest you enable SQL profiler to monitor the queries fired by the query, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition
to improve the query performance. Here are some links about performance tuning.
http://www.bidn.com/blogs/DustinRyan/bidn-blog/2636/top-3-simplest-ways-to-improve-your-mdx-query
http://blogs.msdn.com/b/azazr/archive/2008/05/01/ways-of-improving-mdx-performance-and-improvements-with-mdx-in-katmai-sql-2008.aspx
http://www.packtpub.com/article/query-performance-tuning-microsoft-analysis-services-part1
Hope this helps.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

OCS 2007 R2 Response Group Configuration Tool Failure

Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FR

Hi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SQL Server Configuration Tools Disappeared

I know I used to have Server Configuration Tools, but when I just looked for it, it seems like it has disappeared. I'm looking at this.
I'm getting this login error.
I used to be able to reset SQL Server using the Configuration Tools, but now I can't reset it, and I can't login.
Please help!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hello,
When you connect using SSMS ( SQL server management studio) in server name give like
hostname\mssqlserver--if it is default instance
hostanme\instancename if it is named instance
hostname\SQLEXPRESS is it is express edition
now go to run tyoe services.msc look for SQL server services check if it starte dor not if not please start in try connection using above information
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Calling Remote function tool leads always to a logon screen

Hello,
I run an remote function tool in system A. In System B I run a report calling this function module.
Each time, I execute the report, a remote logon screen appears. It looks the same like the one you logon the system. You have to specifiy client, user and password.
I know one possibilty to avoid this logon screen appeaering.
System B (holding the function module) must declare System A as a trusted system. Thus, the user does not need to logon system B, each time calling the func. module. I processed this in correspondence with the help data, but the screen still appears.
Is there any other possibilty to avoid appearing the logon screen or does anybody know wheter I did something wring??
thanks, holger

Hi Holger,
1. This has to do with tcode SM59 (Maintain RFC Connections)
THE CALLING SYSTEM HAS NOT DEFINED
USER ID / PASSWORD TO LOGON TO THE TARGET SYSTEM.
HENCE, IT SHOWS BLANK LOGIN SCREEN
2. Under the node RFC Destinations ---> R/3 Connections,
various systems are defined for RFC Purpose.
3. Lets say ur system(which u want to connect) is PRD.
4. Double Click PRD and go the the details.
5. There are 3 Tabs. Goto LOGON/SECURITY TAB.
6. In the logon information , enter the
USERID and password and client.
7. Save.
Then try your program.
Hope this helps.
Regards,
Amit Mittal.

Test Configuration Tool: Sender Agreement Not Found

Hi, All:
We have new XI3.0 setup and I just want to test simple file to file scenario, but the file was picked up by sender file adapter, however, there is no message sent to Integration server.
When I use Test Configuration Tool, the sender agreement is green, however, it also mention Sender Agreement Not Found, see below:
================================================
Sender Agreement
================================================
futhermore, Interface Mapping is not found either. Actually, Interface has been created on IR. Sender Agreement also created in ID.
Anyone who has idea about these two errors ?
Thanks in advance
Liang

Hi, Raj and Srinivas:
Thanks for your reply.
First of all, all the objects are activated, secondly, when create sender agreement, I just need to input the Sender Service Name / Sender Interface / Sender Interface Namespace. Then finally select commnication channel.
For any Receiver sides, they are grey out, I am not able to input anything.
So, there is no "*" in any fields.
I doubt if there is any setup wrong, especially for adapter engine, maybe some modules that are not functional for file adapter engine, since I also see other problems, I might post them as separate thread.
In Adapter monitor page, I did not see the adapter.
In RWB, if I use IE, there is Error in the page, using Firefox, it is OK.
Thanks And Regards !
Liang

Install Oracle 9i in Redhat 7.1 hangs at Configuration Tools

I have upgraded the binutil to binutil-2.10.91.0.4-1. Everything seems fine until Configuration Tools. The Oracle Net Configuation Assistant shows in progress status and did not completed. In the detail box, it shows Running Listener Control
/u01/app/oracle/product/9.0.1/bin/lsnrctl start LISTENER.
Any idea?
Thanks,
Ed

Hi, I had the same problem. But I don't think its a serious problem at all.
What I did was, stop the Net Configuration, so that it can carry on with configuring the Apache web server, followed by database creation. Only after the database was created successfully, then restart the Net Configuration again. It should work after database configuration.
Cheers.

9iAS Linux - ADMN 100999 - configuration tools aborted

Hi
I installed on SUSE Linux 8.0 the 9iAS R2, only the option A - J2EE and WebChache. Now I have following problems.
1. Some configuration tools (OC4J, OPMN, DCM)were not initialized in the end of the installation. I read other postings with the same problems, but i never read a solution of these problems.
2. After installing, i want to start the http server manually (dctml start -ct ohs) , but it doesn't work. I got the error message ADMN 100999. dctml -resyncInstance was not successful.
Other admins has same problem, they reset the admin password and it worked.
But I can not use the script resetiAspassword.sh because I never installed the infrastructure.
If i want to start the http-server with enterprise manager (EM worked) I got an EMException.
I have no idea to resolve the problems, perhaps you
Thank You

Hello Diana, i am having the same exact problem except it is on rh7.2. my initializations were also a problem: i have emctl but not dcmctl and therefore cannot run http. i am convinced i need to de-install/wipe clean/re-install. u r lucky because u r runninng on suse 8. u may consider de-install/re-install. i am going to wipe the directory clean this time becaue i have already tried de-install/re-install many times. thanx, david brown. webitplanet.com.

Configuration tool

Do any one can expalin me about the configuration tool and give any link for guide line purpose

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/f69f3f12e1eb0ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/2f/f79f3f12e1eb0ce10000000a114084/frameset.htm
Template Configuration Tool
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc68ec90-0201-0010-cd85-de89a636a663
Regards,
Prateek

Remote configuration tool.

Similar Messages

Maybe you are looking for