Remote configuration

I'd like to set up a wireless system for my residential tenants in another state. After I go on site and install the hardware, can I administer the AirPort Extreme Base Station over the internet from out of state?
Power Mac G4 Mac OS X (10.4.8) clients will be Macs and PCs

Jose,
To answer your second question yes, you can configure WebLogic Workshop to
connect to an remote WebLogic Server instance. I have added some information
regarding this to this post. Regarding the first question, can I install
WebLogic Workshop without WebLogic Server, currently this cannot be done.
The installers are not designed to allow this.
Listed below is a solution (S-20563 ) I've created which is available on
AskBEA site
http://support.bea.com/application?namespace=askbea&origin=ask_bea.jsp&event=button.search_ask_bea&askbea_display=relevancy&askbea_max_number_returned=50&question=How+do+I+connect+to+a+remote+WebLogic+Server+from+Workshop&all_bea_products=all_bea_products&ES=ES
Hope this helps.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Jose" <[email protected]> wrote in message
news:3f5cdc0e$[email protected]..
>
I would like to know if I can install WebLogic Workshop 8.1 withoutinstalling
WebLogic Server 8.1.
I mean, can I configure WebLogic Workshop to use an instance of WebLogicServer
that is running on a remote machine?
Thanks in advance.

Similar Messages

Problem creating project from a remote configuration

Hello,
i have developed a DC with a remote configuration. After having released my development activities adn transproted it into the test and consolidation systems, i would like to go on developing. If i start the NWDS again and log onto the DTR a message is displayed, that there is a new version of my DC and i should remove and remimport the DC.
After doing so, i get the new remote DC, but my project is gone. So i tried to create a new project of this DC. During the project creation process i see many errors in the task bar: "failed to resolve reference" and "could not load used dc". But i think more important i get a popup saying, that the file dcdef is readonly and mandatory changes can not be made.
Can anyone help me with this!

Hi Pran, Ramakrishna
sorry for answering so late and thank you for your help. I did as you told me, but i can´t see anything wrong in the configuration nor can i get any further.
Pran:
I have done the DTR action on .dcdef file as you told me. Afterwards i did not get any exception regarding a readonly reason, but i can not rebuild the newly created project because of missing DCs.
"remove and import procedure"
After starting the developer studio and logging into the JDI there was a message, that there is a new configuration version active on the JDI and i should remove my local configuration and import the new remote configuration again. I think this is a normal procedure after having transported your DC.
For now i have stopped developing with the JDI. Maybe giving it a try sometime again. How is your experience with JDI?
Thank you for your help, again!
Best regards,
Christian

Airport extreme remote configuration

Can anybody help in enabling airport remote configuration?

Yes, this is possible.
The setting on your Airport Extreme you want is called "Allow setup over WAN" (on the "BaseStation" tab). Check this box and click "Update". You may get a security warning when you try and save this setting - read it and then decide whether you're happy ignoring the warning.
Now, when you're outside the network, launch Airport Utility and choose File->"Configure Other...". Enter the external IP address of your Airport Extreme and the password... and you're in.

SQL server remote configuration

Hi,
We are trying to install just the BIDS in a user machine to be able to develop reports remotely. I have a couple of questions.
1. In my current scenario, SQL server 2008 R2 is already setup with the reporting services in say, Machine1. Can it be reconfigured so that
a user in Machine2, trying to develop a report, access report server DB in Machine1?
2. Can this be done in such a way that, first we want to point BIDS to a sample database (like Adventureworks etc.) in Machine1, before trying
to develop reports with the actual database?
Could anyone help with the detailed steps involved.
I have done development of reports with an SQL server installation and configuration in the same machine sometime before, but not remote.
I looked for manuals, there is help available, but for this scenario, I want to confirm with the steps involved.Any input in this regard would be extremely helpful.
Thanks,
SK

Hi valueinfo,
As per my understanding, you have a machine named machine1 with Reporting Services in SQL Server 2008 R2 installed. When the users create reports using BIDS, you want to allow them to use the database installed on machine1 remotely. If that is the
case, we need to allow remote connections to this server, then add new login to the database. For detail information, please refer to the following steps:
In SQL Server Management Studio, right-click the instance and open properties dialog box.
Click Connections, in Remote server connections section, check Allow remote connections to this server check box.
To configure database access, expand the Security folder, right-click Logins, and then click New Login.
In the Login – New dialog box, specify SQL Server Authentication mode.
Type a logon name and password, and then confirm the password.
In the left pane, click Database Access.
In the right pane, select the Permit check box for the databases you are granting access to, and then click OK.
If we want to use Windows Authentication, we need to be members of the local Administrators or users group.
Reference:
How to enable remote connections in SQL Server
How to add a SQL Server Login
If there is any misunderstanding , please feel free to let me know.
Best Regards,
Wendy Fu

Remote configuration tool.

Dell has a downloadable tool called: DCCU Dell Client Configuration Utility. When you run this it lets you create an exe file that can be run on any Dell machine to make changes to the BIOS settings. I used it with a remotely deployed script to enable the Wake on Lan setting in the Bios. I was hoping IBM or Lenovo might have something similar. Some sort of remote management software for enabling Wake On Lan. I read a little about LCCM: LanClient Control Manager but none of its links are active anymore. Any help or redirection would be greatly appreciated.

Hi,
try this link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70569
Download the file called scripts.zip using that you can configure the system.
Start the file called: "ListAll.vbs" => it will show you all the configuration, that is set; In the same time it will show you the name of the Wake on Lan script, that you can use to configure the systems.
Use the file called "SetConfig.vbs" in conjuction with the name and the configuration that you want to have on the machine.
Example:
SetConfig.vbs %nameOfTheProcess% Disabled
This configuraition is different by couple systems, so it would help, if you can tell me, what all systems will be changed using this configuraiton files?
NOTE: This files can not be distributed to end clients, as the missuse of them might root into unexpected behaviour.
Rgrds

Remotely configuring airport networks?

Has anyone successfully used the networkservice command thats part of the ARDAgent.app (same location as kickstart (/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ kickstart)?
Trying to remotely admin a test PB G4 1.25GHz running OS X 10.4.11 gives me inconsistent answers (line breaks added for legibility):
Loaner-2:~ tech$ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/net worksetup -getairportpower
AirPort Power: Off
Loaner-2:~ tech$ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/net worksetup -setairportpower on
You cannot set AirPort power because all AirPort network services are disabled.
Loaner-2:~ tech$ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/net worksetup -getnetworkserviceenabled AirPort
Enabled
Loaner-2:~ tech$ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/net worksetup -setnetworkserviceenabled AirPort on
Loaner-2:~ tech$
Loaner-2:~ tech$ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/net worksetup-tiger -setairportpower on
You cannot set AirPort power because all AirPort network services are disabled.
etc.
Has anyone successfully used this on Tiger machines or is it just broken?

The critical elements here are the single characters after the IP addresses in the tcpdump output.
IP 192.168.1.125.53314 > 69.68.125.123.5009: S
This is your machine at 192.168.1.125 sending a SYN packet to 69.68.125.123 to initiate a connection.
IP 69.68.125.123.5009 > 192.168.1.125.53314: R
This is the reply from the base station. The R indicates it is a Reset packet, meaning that the base station is rejecting your connection attempt.
IIRC the AirPort can only be configured from a machine on the same subnet as the base station itself - even if you enable management on the WAN port it still needs to be a machine in the WAN subnet, not some random machine on the internet.
Your best bet is likely to be a VPN or some kind of port forwarding setup to bounce your connection off a machine on the base station LAN.

Remote configuration question

Hello! I have several questions about configuration in my system that is shown on picture.
I need to have a possibility to program the second FPGA(Virtex-6) and its flash memory. I'm going to send mcs or bit file via ethernet to FPGA 1(Kintex-7) then programming in JTAG-mode FPGA 2 or its flash. First of all, i need to develop JTAG configuration logic at FPGA-1. Then, i have a questions:
1) Is it possible to detect in the jtag chain a flash memory of the FPGA 2 and programm it via FPGA-1? Or its only possible to programm it only using Impact and jtag-programmer?
2) I would like to know if my jtag-configuration logic (at FPGA-1) will have mistakes, is it possible to damage fpga-2 by sending wrong sequences of bits during configuration it "on fly"?

XSVF is something like taking a straight-forward iMPACT programming process, and then recording the transitions of the JTAG signals. Then what you do is to "play back" the recording to make the same thing happen within your target system. Pretty much anything you do in iMPACT including indirect flash programming (SPI or BPI) can be converted into XSVF.
You could also roll your own JTAG conversion code, but I think that will take a lot more effort. I would not be too worried about damaging the FPGA, however. Typically errors in the configuration process are detected as CRC errors and prevent the part from running bad codes.

Visula admin tool, remote configuration

Hi all ,
Planned to configure Visual admin tool on local PC for SOLMAN 7.0 with the same network.
Note 758298 - Offline Installation of J2EE Engine Visual Administrator
Do i need to follow the same note If yes,
Im getting stucked in downloading the following
tc_sec_java_crypto_signed_fs_lib.sda
as for the above not or if the complete process is also not correct, pls advice.

Hi Guys,
I have resolved the issue, i was using a look up type of connection, i have changed to direct connection to the dispatcher and selected the transport layer of type default.
Thanks,
k s reddy

SCCP remote configuration changes:

Does anyone know of a way to remotely change the network settings on a 79xx phone? We would like to use a tool or script to make sure each phone is set for auto negotiation.

Unfortunately this feature is not available. If your IP Phone is running SCCP, then there is no way to be able to telnet to the IP Phones and change config.

Remote Configure

I have a 1231 high in a warehouse that needs converted to Autonomous mode.
Please tell me if this will work:
From the controller, revert the ap to a previous release not in LWAPP
Wait for AP to pull DHCP to GUI into, configure from there.
Is that the best way, short of getting a scissor lift to take it down to reconfigure it?

That would work well. Otherwise you would need to get the AP into your hands to be able to convert it to IOS.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Configure job scheduler by remote server

Hi,
I have a requirement about job manager,
I need to remote server to configure scheduler, but I haven't find the way to configure the server scheduler by remote.
And in the configuration,there need to input some information like Scheduler Script Path,Default Script Path,Log Directory……and so on.
Is it support remote configuration or not?
Thank you!

No, it doesn't support !!

Remote syslog configuration

Hi All,
I have done the syslog remote configuration on the switch. However, logs are not being received to the server and when doing capture on the firewall, we have noticed that the switch is not sending the logs to the default port UDP 514 but to random port each time ( being incremented ).
Kindly find below the logs.
Can you please advise what's wrong?
Deny udp src MPROR:10.160.124.166/40865 dst To-Falcon:10.19.28.221/33437 by access-group "
Oct 28 17:56:32 Deny udp src MPROR:10.160.124.166/33007 dst To-Falcon:10.19.28.221/33438 by access-group "
Oct 28 17:56:35 Deny udp src MPROR:10.160.124.166/32790 dst To-Falcon:10.19.28.221/33439 by access-group "
Oct 28 17:56:38 Deny udp src MPROR:10.160.124.166/37362 dst To-Falcon:10.19.28.221/33440 by access-group "
Oct 28 17:56:41 Deny udp src MPROR:10.160.124.166/35964 dst To-Falcon:10.19.28.221/33441 by access-group "
Oct 28 17:56:44 Deny udp src MPROR:10.160.124.166/33659 dst To-Falcon:10.19.28.221/33442 by access-group "
Oct 28 17:56:47 Deny udp src MPROR:10.160.124.166/33024 dst To-Falcon:10.19.28.221/33443 by access-group "
Oct 28 17:56:50 Deny udp src MPROR:10.160.124.166/36429 dst To-Falcon:10.19.28.221/33444 by access-group "
Oct 28 17:56:53 Deny udp src MPROR:10.160.124.166/38646 dst To-Falcon:10.19.28.221/33445 by access-group "
Oct 28 17:56:56 Deny udp src MPROR:10.160.124.166/37650 dst To-Falcon:10.19.28.221/33446 by access-group "
Oct 28 17:56:59 Deny udp src MPROR:10.160.124.166/34049 dst To-Falcon:10.19.28.221/33447 by access-group "
Oct 28 17:57:02 Deny udp src MPROR:10.160.124.166/39291 dst To-Falcon:10.19.28.221/33448 by access-group "
Oct 28 17:57:05 Deny udp src MPROR:10.160.124.166/33938 dst To-Falcon:10.19.28.221/33449 by access-group "
Oct 28 17:57:08 Deny udp src MPROR:10.160.124.166/42739 dst To-Falcon:10.19.28.221/33450 by access-group "
Oct 28 17:57:11 Deny udp src MPROR:10.160.124.166/33979 dst To-Falcon:10.19.28.221/33451 by access-group "
Thanks.
Jean

NPE_SWITCH#sh version
Cisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 19:15 by nachen
Image text-base: 0x00003000, data-base: 0x01080000
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)
NPE_SWITCH uptime is 46 weeks, 4 days, 23 hours, 47 minutes
System returned to ROM by power-on
System image file is "flash:c3750-ipbase-mz.122-35.SE5/c3750-ipbase-mz.122-35.SE5.bin"
cisco WS-C3750G-24TS-1U (PowerPC405) processor (revision F0) with 118784K/12280K bytes of memory.
Processor board ID FOC1332Z2UY
Last reset from power-on
2 Virtual Ethernet interfaces
56 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:26:CA:2E:C2:80
Motherboard assembly number     : 73-10219-07
Power supply part number        : 341-0098-02
Motherboard serial number       : FOC13311PW2
Power supply serial number      : DCA132891JW
Model revision number           : F0
Motherboard revision number     : D0
Model number                    : WS-C3750G-24TS-S1U
System serial number            : FOC1332Z2UY
Top Assembly Part Number        : 800-26859-01
Top Assembly Revision Number    : E0
Version ID                      : V03
CLEI Code Number                : CNMWS00ARC
Hardware Board Revision Number : 0x09
Switch   Ports Model              SW Version              SW Image
     1   28     WS-C3750G-24TS-1U 12.2(35)SE5             C3750-IPBASE-M
*    2   28     WS-C3750G-24TS-1U 12.2(35)SE5             C3750-IPBASE-M
Logging Configuration :
logging source-interface Vlan668
logging 10.19.28.221
Thanks.

WDS Set up - Help Needed! Airport Extreme with one Relay and one remote

Hi Guys,
I need a bit of help. I am feeling quite stupid and frustrated. I am having some difficulty with setting up a WDS network with:
Base station: Airport extreme (current version)
Relay: Airport Express (current version)
Remote: Airport Express (current version)
I start by cold resetting the three units. The Base station is connected via Ethernet. The setup I wish to get going is a simple base - relay - remote.
I go through the utility manager and set up the base station, first as "create a wireless network" enter the ISP details etc etc. Its green light. Everything is fine. Then manually configure the Base Station. Hold down option key hit Participate in a WDS. I then select main enter + and add the Mac Id's for the intended Relay unit and Remote Unit (12 character and numeric string). At this stage I am only adding the intended Relay unit and Remote units MAC number.
Question 1: Do I need to add the base unit's MAC number itself under: WDS Remotes? even I am setting it up as Main?
I am careful to note the security settings and the the Wireless Network name to match these in the relay and remote set up. Under the Wireless tab I leave the Radio Mode: as Automatic (802.11a/n - 802.11b/g/n). I make sure the base has "allow this network to be extended" ticked. Under Radio Channel selection I edit it to reference channel 1 for 2.4Ghz (5 Ghz leave as Auto). I am careful when setting up the Relay and remote to match the Radio Channel. (Although I tired many channels as I thought maybe interference was a factor and denying the fact its obviously my set up skills as a factor).
Question 2: Do you need to disable Guest networks? I would think it does not matter as I have tired turning it off and has not made any difference.
Under Access Control I leave as default, Not enabled.
Next I hit update and and error message comes up. WDS Error as it can not find other units. Ok fine as the relay and remote are not yet set up. So I ignore and can get to the stage where the base unit is working and green light with an internet connection.
I then proceed to set up the Relay unit. Doing the same steps as above with a couple of differences being I add the MAC numbers and select the WDS Mode (Relay for Relay and Remote for Remote. I add the Main base station (i.e Airpot Extreme MAC No.) when prompted and then + the Remotes MAC number. The same for the Remote except I only need to add the base station's main no.
Question 3. Do I need to add the Relay's own MAC number to its own setup? This seems doubtful as with the base station but tired with and without for good measure with no success.
The 2.4Ghz channels are all set to 1. Radio mode set to Auto. Although even when I try to manually set them to all identical it doesn't seem t help.
Then the problems begin. The base unit is Green and the Relay and Remote say they are not connected to the internet. I assume since I have not seen a WDS Error message then the units are set up correctly or as I ignored it on the base unit. But when click unignore the error seems to work itself out.
Question 4. I need help to understand why I have no internet. The remote / relay says something about no IP number and I don't really understand what I should do? Do I need to go back the Airport Utility Manager and start messing about with the TCP/IP, DHCP, NAT ? The base is set up PPPoE and the relay and remote are set to Bridge.
It is really puzzling me why the relay and remote flash amber with error messages related to the IP number? I have tried turning off the base station and router and then on again but no joy.
Can anyone please enlighten me or give me a few ideas? I am doing something very obviously stupid and I guess the fix is something simple that I have overlooked.
I did spend the time and go through the threads and search online, So I am not trying to waste anyone's time I referenced the two links to get a second opinion:
http://broadcast.oreilly.com/2009/03/taming-an-airport-express-wds.html
http://www.macobserver.com/tmo/article/settingup_an_airport_relay_with_airportexpress/
Any help much appreciated!

Versed wrote:
I need a bit of help.
Welcome to Apple's discussion groups.
My WDS experience is limited to "main" and "remote" configurations (no "relay"), so I'm not posting from direct experience, but below is what I think would work in your case.
I go through the utility manager and set up the base station, first as "create a wireless network" enter the ISP details etc etc. Its green light. Everything is fine. Then manually configure the Base Station. Hold down option key hit Participate in a WDS. I then select main enter + and add the Mac Id's for the intended Relay unit and Remote Unit
I don't think the "main" unit needs to be told about the "remote" unit, only about the "relay" unit.
Question 1: Do I need to add the base unit's MAC number itself under: WDS Remotes? even I am setting it up as Main?
You'd never enter the MAC address of a unit into its own configuration, if that's what you mean. I also don't think that you'd need to enter the MAC address of the main into the remote and conversely.
I am careful to note the security settings and the the Wireless Network name to match these in the relay and remote set up. Under the Wireless tab I leave the Radio Mode: as Automatic (802.11a/n - 802.11b/g/n).
Five things have to match in a WDS configuration: network name, encryption type, network password, band, and channel.
I make sure the base has "allow this network to be extended" ticked.
I don't think that's important for a WDS configuration.
Question 2: Do you need to disable Guest networks?
I wouldn't think that matters.
Under Access Control I leave as default, Not enabled.
That's fine.
WDS Error as it can not find other units. Ok fine as the relay and remote are not yet set up.
Right.
I then proceed to set up the Relay unit. Doing the same steps as above with a couple of differences being I add the MAC numbers and select the WDS Mode (Relay for Relay and Remote for Remote. I add the Main base station (i.e Airport Extreme MAC No.) when prompted and then + the Remotes MAC number. The same for the Remote except I only need to add the base station's main no.
I think this should be the MAC address of the relay station, not that of the main station.
Question 3. Do I need to add the Relay's own MAC number to its own setup?
No.

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

IIS Manager 6.0 Wait Operation Time Out on connecting to remote server

I'm looking to configure SMTP on Server 2012 Core, I've installed the feature and remote management/administration tools and web management console and web management compatability. When I attempt to connect via IIS 6.0 Manager I immediately receive "The
wait operation timed out"
I've removed and re-installed the SMTP-Server feature without success
any suggestions would be appreciated.

I encountred this issue the IIS 6.0 requires the SMTP if you want to configure the remote management of the Server Core then try to follow this youtube podcast
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
of this serie that shows how to install and configure a web server core from A to Z
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Remote configuration

Similar Messages

Maybe you are looking for