Remote connect to home network

I will be on vacation and taking my laptop. I would like to connect to my Mini back home.I am file sharing with the Mini through a wireless connection - Airport Extreme.
I will have WiFi at my Vacation destination.
I believe I use my IP address to make a connection, but am unsure as to how I accomplish this.
Any help would be apprciated.
Thanks!

In System Preferences>Network>Locations>New Location, just make a new one named Away or such, likely just needs to be set to using DHCP under the TCP/IP tab..

Similar Messages

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • IPad3 loses connection to home network and same happens to laptops.

    I purchased the new IPad a week ago. Since then, I often lose connection to home network. Cannot join network unless I power off and on the modem/router. This also hapens every morning. The same is now happening with our  wireless laptops.  Never had any problems all these years until the iPad was introduced to our network. Our Internet provider confirmed that modem/router protocols were set per advice from Apple Support and they did additional tweaking but problem persists. I am thinking of getting a new modem and router but wonder if it is worth it. Has anyone had similar problems where their other devices are having the same connection issues as the iPad? Thanks.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Hello my iphone 3g can not connect to home network via wifi

    Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

    I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G.  It will access other wifi signals.  My wife's iphone works fine, as does an ipad and macbook.  This is new for my iphone, about 2-3 days.
    Help!  I reset network settings and rebooted the router (Apple), no avail

  • HT4796 ??it keeps looking for computer, both are connected to home network, what now?

    ? I am trying to transfer from pc to mac, using migration tool, both are connected to home network, it keeps saying "looking for other computers" - not finding it, what now?

       Hi,
          Please follow the steps in the link below to solve the issue :
    http://support.hp.com/us-en/product/HP-Officejet-P​ro-8620-e-All-in-One-Printer-series/5367611/model/​...
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Cant use iphone4 wifi connect with home network

    Updated iphone4 version 4.3.2 the phone still cant connect with home network via wifi! When before updated was everything normal!
    Could anyone help?
    I switched the rounter on and off and the securty ps from the rounter is correct! But it keeps sayin cannot connect with xxx network, and i have to keep "dismiss" it!
    Please help, is the iphones problem or my rounter?

    ive tried that also, completely disconnecting the modem and router but still same problem, updated iphone software, reset factory and network settings.. still nada thanks for your input tho

  • Connected to home network, but cannot access internet on ipad

    I have got strong signal on home network but cannot access the internet. Tried resets, etc

    It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

  • IPhone WiFi will not connect to home network.

    iPhone will not connect to home network.  WiFi is on and correct password is entered.  iPhone error msg says incorrect password.  Reloaded network software and did not activate password but iPhone still shows network as locked. 

    Some people who experience issues connecting to or even seeing there Wireless network should follow these steps.
    These steps are just a guideline and its not 100% that it will fix your issue.
    Mainly, if the issue persists, its possible there is an issue with your iOS settings or a hardware failure within your iPhone or iPad, specifically the Wifi adapter.
    You would want to follow these articles to do a reset & restore prior to saying it is a hardware issue.
    #1: Reset: http://support.apple.com/kb/HT1430
    #2: Restore: http://support.apple.com/kb/HT1414
    You will need to access your Admin control panel for your router.
    If you have an Airport Extreme BaseStation, you just need to open the Airport Admin Utility found in Applications > Utilities Folder.
    Enter your credentials and you will have access to the settings from there.
    For a PC: Do NOT use the CD that came with your router. That is used for people who do not know how to setup a router properly and these settings will not be available for you in most cases.
    If you are using anything other than an Airport BaseStation:
    Open a web browser:
    In the address bar, type:
    192.168.1.1 (Mainly used for Asus, Linksys, etc) or 192.168.0.1 (D-link,Belkin)
    How to figure out what the IP address is to type in?
    Windows:
    Hold down the windows key, then press R. This brings up the run box. In that box type "cmd" (without the quotes) and press enter. In the black box that pops up, type "ipconfig" (without quotes) then hit enter. Your default gateway is the IP address for your router. It will start with 192.168.....
    Take that number and put it into the address bar in your browser and hit enter. It will then ask you for a user name and password. For linksys, it's admin for both. If you have another brand, just google "default password for ******" replacing the asterisks with the brand name of the router. Once you have entered the correct user name and password, you're there.
    Mac:
    1.From the Apple menu, select System Preferences.
    2.In System Preferences, from the View menu, select Network.
    3.Select the appropriate port. For example, choose Ethernet for broadbandconnections, AirPort for wireless, or Internal Modem for dial-up.
    4.Click Advanced... , and in the sheet that opens, click the TCP/IP tab.
    The number next to "Router:" is your default gateway.
    Once you get into your admin panel do these setting changes.
    1.On the router change the channel for the 2.4mhz band to channel 1, 6, or 11 (recommended), rather than auto.
    2.Also set that channel width to 20hz only, rather than 20hz or 40hz (Auto)
    3.Make sure Security is set to WPA/WPA2-Personal. Anything else will cause issues. (of course, make sure you know your password for security)
    4.Make sure to Apply/Save these settings. Sometimes the wireless connectivity will go out during this change and will come back on within 15-30 seconds.
    5.On the iPhone/iPad go to Settings > Wi fi > click the blue arrow beside the network > Select Forget network
    6.Go to Settings > general > reset > reset network settings
    7.Power the phone off and on. Connect again
    For additional assistance in troubleshooting Wifi connection problems go here: http://support.apple.com/kb/TS1398

  • Remote desktop on home network

    Hi
    Can I remote access windows 7 PC on 27" iMac, on home airport extreme network, as I dont have broadband but use my iPhone as a personal hotspot to connect to the internet on iMac, if so how do I do this
    Thanks in advance

    You could use some thing like LogMeIn to remotely connect to a computer at work witch is running ARD.

  • How do I use my wireless Led TV as a second monitor using my home network without any cables? Both of them are connected to home network

    How do I use my wireless Led TV as a second monitor to my mac book pro using my home network without any cables? Both of them are connected to home network

    Having a gateway there is not going to be a problem. We just need to configure the Time Capsule correctly to work with the 2Wire.
    You will need one ethernet cable to connect the 2Wire to the Time Capsule and a second ethernet cable to temporarily connect your computer to the Time Capsule so that it can be configured.
    The 2Wire you have now should already be broadcasting a wireless network, so once you have the Time Capsule setup, you will actually have two wireless networks there.
    Here's how to configure the Time Capsule to work with the 2Wire:
    Connect an ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN (circle icon) port on the Time Capsule.
    Connect another ethernet cable temporarily from your computer to one of the LAN <-> ports on the Time Capsule
    Open Hard Drive > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Base Station tab below the row of icons to assign a name for the Time Capsule, a device password (write this down) and adjust time zone settings
    Click the Wireless tab below the row of icons
    Wireless Mode....Create a wireless network
    Wireless Network Name....Your choice
    Radio Mode....Automatic
    Channel...Automatic
    Wireless Security...WPA/WPA2 Personal
    Wireless Password....Your choice (write this down)
    Check mark next to....Remember password in keychain
    Click the Internet icon
    At the bottom, change the setting for Connection Sharing to "Off (Bridge Mode)"
    Click Update at the lower right and the Time Capsule will restart after 20-25 seconds and you should get the green light.
    You should now be able to connect to your Time Capsule wireless network.
    I'm not clear on whether you have tried to setup the Time Capsule to backup your computer. Post back if you need some info on that. We may need to start another thread for that as that will be a different subject.

  • IPod Touch only connects to home network; not Airport, Starbucks, Panera...

    Before I start, I've read the FAQs and have looked through a number of topics already posted.
    I seem to have the opposite problem everyone else is having. My iPod Touch connects just fine to my home wireless... It connects and I'm able to browse the internet, download apps, etc without fail.
    However, when I was at the airport recently (both St. Louis and Dallas/Ft. Worth), my Touch would "connect" to the wireless there, but I couldn't go on the 'net or get new apps, etc. It was behaving as if I wasn't at a location with wireless access. When I returned home, I went to Starbucks, Panera, McDonald's... several places with free, open, easy-to-connect WiFi (and took my laptop to make sure that their wireless was working), and had the same problems as I did at the airport.
    Considering the best part of having wireless on the Touch is that you should be able to access it anywhere with WiFi, it seems kind of "useless" to have it only work at home (I have two computers at home; so it's not like I need to use the Touch for internet there).
    Any thoughts? Obviously, the whole "check your router settings" / "reset your router" answers are not going to help me, as I have no control over those, nor can I see them at these places. Help would be greatly appreciated!

    I'm having the same problem. My iPod Touch connects to my home network and another secure network for which I enter the network name and password. However I am unable to connect to any free WiFi, even when my laptop can access it with no problem. The signal is apparently strong; I can see all the bars on the upper left, but when trying to connect to Safari or the app store it says that there is no connection.

  • Can't connect to Home Network and Printer

    hi,
    I just bought my first mac, its a macbook with leopard, and am having quite a bit of trouble connecting it to our home network. I'm not much of a computer whiz, so i have no idea what to do. Our network doesn't have any security, but does need a password, and each time i try to connect it after putting in my name and password it says "The Volume cannot be Mounted" and then comes up with an error message saying "an unexpected error occurred". And because i cannot connect to the network i cannot connect to our printers and need them desperately, i start uni in a week!
    what can i do?
    thanks
    dan
    if more details are needed let me know...

    What version of Leopard are you using? I asked because Apple just released 10.5.2.
    Plus if you are adding a lone Mac to a windows network then read the user reports at MacWindows.com (you should have the site bookmark if you are going to mix Macs into PC networks).
    Message was edited by: satcomer

  • IPod touches don't connect to home network

    For some time, the two iPod touches in our household have had trouble connecting to our home network.  There have been no problems with other networks. We have a cable modem connected to a Time Capsule, which creates the network, with no extenders or bridges.  Our other Macs, two Macbooks and an iMac, have no problem whatsoever connecting. The iPod touches have performed variably getting connected, sometimes appearing to be connected, but slow, sometimes "Unable to join the network".  The problem improved for a while, after trying all of the things suggested in the support documents and communities, and resetting the Time Capsule, recreating the network with a new name and password.
    In the last few days the iPod Touches have completely stopped connecting to the network again.  Even the name of the network only shows up sporadically to attempt entering the password. There is no connection with or without the WPA2 Personal security on. One thing that might be related is that when I look at System Profiler>Network>Airport there are sometimes two networks listed with my network's name, one under "Current Network" and one under "Other Local Wireless Networks".  Interestingly, they are on different channels. The Current network is on "149,1" and the other is on "3". Occasionally I can see neighbors' networks, with much worse signal/noise ratios as one would suspect, so I'm not too suspicious of interference from that source although the channels are always single digit ones there. My understanding from my reading in the support documents is that the iPods connect only at 2.4GHz, which would be the single digit channels.  I did try changing the channel width to 20MHz instead of 40MHz once, and that didn't seem to make a difference, so I changed it back.  Otherwise, all is set as per this document:   http://support.apple.com/kb/HT4199
    Can anyone help?

    I decided it was time to take the Time Capsule and one of the iPods to the local Mac Store, for repair of the Time Capsule.  Everything worked fine!  I came back home and rechecked the home for all the things in this article: http://support.apple.com/kb/HT1365  and once again found none. 
    The Mac technician's suggeston was to try specifying the channel, as opposed to letting the Time Capsule automatically choose the "best" one.  It worked!  (I chose channel 8, since I had not seen it used by my networks or neighbors' when I looked in System Profiler.)
    Just adding this post in case it helps someone else.

  • Ipad mini wireless connection crashes home network

    New ipad mini connects to home wireless network, but other computers on the network lose connection to include the ipad mini.  Happens quite frequently.  Any ideas on why this is happening?  And how to fix?

    HI, thanks for your response.
    No I do not have the Mac enabled in my router. Just at the point were I can add one new wireless connection there does not appear anything. Unfortunately I this is my only wireless connection so no caomparison with an other working system is possible.
    Ben

  • Remote connection from home PC to work iMac

    Our organization recently purchased an iMac 27-inch for an employee. That user would like to be able to remote into the computer from home. Unfortunately, that user has a PC at home. We were able to establish a VPN connection on the home PC and recreate the user's desktop via TightVNC: http://www.tightvnc.com/
    We can see the desktop and access mail and files but the connection is way too slow to work effectively. Has anyone tried a different solution for PC to Mac remote connections? Thanks in advance.

    Never tried
    http://www.coderebel.com/products/irapp

Maybe you are looking for