Remote connection to database fails

Hi,
I İnstalled oracle 10g on my computer which is also my server on win XP .The problem is I cannot connect db from outside (WAN) while I could connect to it via LAN.
I used " http://jens:5500/em " to connect via LAN but it did not worked when i tried to connect outside.Then I tried to ping the computer it says request timed out.What can I do to handle this problem.
Best,

Ask your network administrator.
If you cannot communicate via ICMP, it is very likely that you will not be able to establish a TCP connection.
Without TCP, you cannot establish an Oracle connection.
Make sure that you have nor firewalls or proxy servers in between, or use Oracle Connection Manager on the proxy server.
Yours,
Laurenz Albe

Similar Messages

Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno      00
M sid        SED
M systemid   562 (PC with Windows NT)
M relno      7010
M patchlevel 0
M patchno    32
M intno      20020600
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          22784     (1752)
M DpShMCreate: sizeof(tm_adm)          5912704     (29416)
M DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1864)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.024) Default value for max. input variables is 2000 (note 655018)
C    (0.024) Profile parameter to define max. input variables (note 655018)
C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C    (0.024) Input parameters for SQL statements increased (note 655018)
C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C    (0.018) More trace in case of packed to string conversion error (note 1262799)
C    (0.016) R3trans export aborts with signal 6 (note 1262245)
C    (0.009) IA64 alignment errors (note 1245982)
C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0    BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data   : 1
C SQLDBC supports keepAlive indicator   : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
M
M Info for wp 0
M
M    pid = 212
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Mon May 16 23:57:33 2011
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10783
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key         :DEFAULT
Username    :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :SID
Nodename    :server1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards

*** ERROR = Connect to database failed, rc = -4008 (POS(1) Unknown user na

Hello
I have just finished a dbcopy of Maxdb 7.6 to a new system with initilization.i can bring the db online. I have ran the xuser command to fix the db users as below command as per note 39439
i changed them in home dir of sidadm,sqdsid
                      xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
c) DBM user: for example, CONTROL.
                       xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
d) SYSDBA user: for example, SUPERDBA.
                       xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
But iam having the below error now when trying to bring the SAP system up in dev_w0
C Try to connect (DEFAULT) onconnection 0 ...
C
C Mon Dec 19 21:46:11 2011
C *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combinati
on)
[dbsdbsql.cpp 137]
B ***LOG BY2=> sql error -4008 performing CON [dbsh#3 @ 1208] [dbsh    1208 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dbsh#3 @ 1208] [dbsh    1208 ]
B ***LOG BY2=> sql error -4008 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> POS(1) Unknown user name/password combination [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1537]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10837]
M
is there something that i missed somewhere?
Any ideas welcome

erpsyscs1:cs1adm 46> xuser list
XUSER Entry 1
Key         :DEFAULT
Username    :SAPCS1
UsernameUCS2:S.A.P.C.S.1. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 2
Key         :c
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>
XUSER Entry 3
Key         :c_J2EE
Username    :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset     :<unspecified>
XUSER Entry 4
Key         :w
Username    :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password    :?????????
PasswordUCS2:?????????
Dbname      :CS1
Nodename    :erpsyscs1
Sqlmode     :INTERNAL
Cachelimit :-1
Timeout     :-1
Isolation   :-1
Charset     :<unspecified>

Error Connect to database failed : sqlcode=-4008 in dev_w0

Hi all,
I have a testing ABAP ECC5 system (in Windows 2003, MaxDB 7.6 build 35).
After changing default passwords of DB users SAP<SID>, CONTROL, SUPERDBA using DBMGUI, I then run commands below to update new passwords in XUSER entries (according to SAP Note 39439):
- xuser -U DEFAULT -u SAP<SID>,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
- xuser -U c -u CONTROL,<password> -d <database_name> -n <database_server> -S INTERNAL set
- xuser -U w -u SUPERDBA,<password> -d <database_name> -n <database_server> -S INTERNAL set
The SAP system now cannot be started successfully. In dev_w0, there is info. like below:
"Connect to database failed : sqlcode=-4008 (Unknown user name/password combination)."
Command "r3trans -d" returns 0.
In SAP Note 39439 I see that maybe I should update info. for OS user SAPService<SID>. But I don't know what "..." means in command "xuser -c <domain>\SAPService<SID> ..."
I searched SAP SDN & SAP Notes, but still cannot fix this.
Please guide me to update XUSER entries after changing passwords of DB users.
Regards,

> I have a testing ABAP ECC5 system (in Windows 2003, MaxDB 7.6 build 35).
Just as additional info: your database version is ancient - I suggest upgrading to a newer release.
> In SAP Note 39439 I see that maybe I should update info. for OS user SAPService<SID>. But I don't know what "..." means in command "xuser -c <domain>\SAPService<SID> ..."
The SAP system runs under User SAPService<SID>, you're most likely logged on using <sid>adm, that's why your "R3trans -d" connect is successful.
You have to execute the same command for the entry DEFAULT also for user <DOMAIN>\SAPService<SID>, that's what the dots mean
Markus

Installation of CM fails(par files deployed but connection to database fail

Hi,
I have just installed CM EP6 SP2 on an old sandbox system (which has been upgrade from SP0 I believe), and I have some problems. The installation went fine untill I got the error message "CJS-00276 The upgrade failed. The installation report file cf_installation.report does not exist. Check the log files under the server directory and, if necessary, contact your local support center." But I, at least now, find the file but this is probably from my installation of CM SP2 Patch4 and CM SP2 Patch4 hf8 (I was hoping the installation of them would clear the problem).
I believe the problem is that there are missing some files under the SAPPRT share (
server\SAPPRT\EPS1\global\config\cm), this because it was giving some error messages earlier about it. I was running the portal under localsystem user, which hasn't got the possiblity to have access to share's. (I would get an exception about access denied from the file system when starting it up, but after changing the user I don't).
Under
server\SAPPRT\EPS1\global\config\cm the portal has created the following folders:
Backups
config
etc
reports
<b>Are there any one missing ?</b>
(to resolve the problem I tried create the following folders, but still the same problem:
system/updateQueue/events
system/command
system/deployment/archives
system/deployment/upgrades
utilities/connection_pools/db_type/default)
The property files in \usr\sap\EPS1\j2ee\j2ee_01\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\portal\system\cm
look correct, and also the file under portalapps/com.sap.portal.km.application (or something).
When I went into KM configuration in the portal, I noticed there were no JDBC connection pools, and I therefore created two as described in http://help.sap.com/saphelp_ep60sp2/helpdata/en/eb/d10ef2b6a311d5993900508b6b8b11/content.htm
But that is something which the installer should have done for me. (and still the connection pools won't start)
The main error message I get at startup is the following:
Jun 28, 2005 4:45:17 PM      com.sapportals.config.queue.UpdateQueueService [System_Thread_12] Warning": There was a problem initializing the queue service for config manager : configuration plugin for queue service not found (/system/updateQueue/events)
java.lang.RuntimeException: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.initConfig(JDBCConnectionPoolManager.java:566)
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.getInstance(JDBCConnectionPoolManager.java:99)
     at com.sap.workflow.util.config.WorkflowProperties.initProperties(WorkflowProperties.java:188)
     at com.sap.workflow.util.config.WorkflowProperties.<init>(WorkflowProperties.java:48)
     at com.sap.workflow.util.config.WorkflowProperties.getInstance(WorkflowProperties.java:56)
     at com.sap.workflow.es.portal.WFPortalService.init(WFPortalService.java:74)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
java.lang.NullPointerException
     at javax.naming.NameImpl.<init>(NameImpl.java:250)
     at javax.naming.CompositeName.<init>(CompositeName.java:223)
     at com.inqmy.services.jndi.implclient.OffsetClientContext.parse(OffsetClientContext.java:129)
     at com.inqmy.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:200)
     at javax.naming.InitialContext.lookup(InitialContext.java:345)
     at com.sap.workflow.util.ejbfactory.EJBFactory.getUserTransaction(EJBFactory.java:282)
     at com.sap.workflow.es.portal.WFPortalService.init(WFPortalService.java:83)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
And if I go to content administration->KM content I get the following stack trace:
java.lang.RuntimeException: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.initConfig(JDBCConnectionPoolManager.java:566)
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.getInstance(JDBCConnectionPoolManager.java:99)
     at com.sapportals.wcm.repository.runtime.CmSystemInfo.createDBConnection(CmSystemInfo.java:221)
     at com.sapportals.wcm.repository.runtime.CmSystemInfo.checkDB(CmSystemInfo.java:138)
     at com.sapportals.wcm.repository.runtime.CmSystem.startUp(CmSystem.java:226)
     at com.sapportals.wcm.repository.runtime.CmSystem.getInstance(CmSystem.java:161)
     at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:81)
     at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:260)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:736)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:909)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
com.sapportals.wcm.repository.ResourceException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.repository.ResourceException.fillInStackTrace(ResourceException.java:401)
     at java.lang.Throwable.(Throwable.java:85)
     at java.lang.Exception.(Exception.java:33)
     at com.sapportals.wcm.WcmException.(WcmException.java:78)
     at com.sapportals.wcm.WcmException.(WcmException.java:74)
     at com.sapportals.wcm.util.content.ContentException.(ContentException.java:42)
     at com.sapportals.wcm.repository.ResourceException.(ResourceException.java:251)
     at com.sapportals.wcm.repository.runtime.CmAdapter.makeStartupResourceException(CmAdapter.java:397)
     at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:84)
     at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:260)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:736)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:909)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
javax.servlet.ServletException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:111)
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:576)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:669)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:832)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1245)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
I appreciate any help !
PS sorry for the unstructured post, but I am hungry and want to go home now.

The files under the SAPPRT share had somehow failed (some where there, but a lot of the important ones where missing).
I found out that these files were in .configarchive files in the par files to be deployed, and manually unpacked them using these two commands
$ for file in `ls -1 .par` ; do unzip $file ".configarchive" -d extracted >> logfile.txt ; done
$ for file in `ls -1 *.configarchive` ; do unzip -o $file -d extracted >> logfile.txt ; done
Afterwards I had to make some tiny customization (search for %[a-zA-Z]% , especially for the connection pools.
Then a restart, and most of it seems to work (the system will not live much longer so that is acceptable)

TP connect to database fails in 4.0B_EXTN

Hi,
When we try to check the TP tools through STMS. It shows that database connect
failed.
On running the TP connect <SID> pf=...., command through the command
line,it also fails.
The 'TP' cannot connect to the database. I have applied the newest
TP available on the SAP service marketplace.
Our System details are as below.
OS - Windows 2003
Database - SQL 2000
SAP Version - 40B
Kernel Version - 40B_EXTN
We have installed this SAP version because we would like to upgrade our
SAP version from 4.0B to ECC 6.0
The error on the running the command is shown as below.
F:\usr\sap\trans\bin>tp connect DEH
This is tp version 252.08.37 (release 40B) for MSSQL database
ERROR: SAP-System not installed properly.
Systems name (DEH) is different from name in TADIR (SAP)
PANIC PANIC PANIC 20061218162044
ERROR: SAP-System not installed properly. Systems name (DEH) is
different from n
ame in TADIR (SAP)
ERROR: EXIT(16) -> process ID is: 4804
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
tp finished with return code: 233
meaning:
SAP-System not installed properly (HEAD SYST)
Please can any body help me out and provide with a solution.
Regards,
Anwar

Hi
I think u did not configure the STMS in 000 client after installtion SAP in your system.
Configuring Transport Management System
Logon to 000 client of R/3 system which, is to be designated as Transport Domain Controller.
The TMS enables system administrators and technical consultants centrally manage the transport configuration of multiple R/3 systems.
Transport domain: All R/3 Systems that are planned to manage centrally using TMS form a transport domain.
Transport Domain controller: The R/3 System with the reference configuration is called as the transport domain controller. And all R/3 systems hold copies of this reference configuration.
RFC are generated when TMS is configured for R/3 systems to communicate with all R/3 systems in a domain.
regards
kiran.v

DB13: Execute Redo log backup of remote Oracle 11g database fails

Dear Experts,
First of all I have to state I am not very experienced in administrating (Oracle) databases, but I would like to ask you all the following:
We run two SAP Systems with each their own database on the same host:
1. SAP SRM ABAP system on Oracle 11g
2. SAP NetWeaver WebAS Java (Portal) on Oracle 11g
We would like to schedule backups of the Java database in transaction code DB13 on the SRM ABAP system.
Actions already taken:
- We have maintained the proper database connection to the Java database and have set file system permissions correctly (according SAP Note 102570). Connection in transaction DB02 is fine and stats are showing for both databases.
- We have maintained enviroment settings for <SID>_ORACLE_HOME and <SID>_SAPDATA_HOME and for the shell (csh).
- Destination SAPXPG_DBDEST_<host> is maintained in SM59.
When we schedule a Redo log backup of Java System in DB13 and execute immediately, we receive the following error:
Process died due to signal 11
SXPG_COMMAND_EXECUTE mislukt voor BRARCHIVE - oorzaak: unknown
Any tips?
Thanks in advance & Best regards,
Jan Laros

Hi Eduardo,
Thank you for your reply.. Today I am at another customer, so I can not check it. But is seems to me that the BRTOOLS are up-to-date as we installed the system fresh and imported the Support Package and kernel updates right afterwards.
I will check which BRTOOLS are used tonight, anyway.
Best regards,
Jan

Connection tot database fails

Can anybody please tell me why my program wo'nt connect to the database I specified (Start, Settings, Contrl Panel, Adminstr Tools, Data sources etc done beforehand)?
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;
public class Databasis
     public static boolean loadOBDC()
          try
               Class.forName("sun.jbdc.obdc.JbdcObdcDriver");
               System.out.println("Connected tot data souce.");
               return true;
          catch (Exception e)
               System.out.println("Not connected tot data source.");
               return false;
I keep getting my "Not connected to data source" message. Is ther some specific step I overlooked perhaps when I tried to set up the OBDC drivers?
Please help.
Thanks,
Erna@mont

               Class.forName("sun.jbdc.obdc.JbdcObdcDriver");this is your problem
it has to be jdbc.odbc.JdbcOdbcDriver
have fun...
hey don't forget to connect to the database
Connection... that only you load the class, you dont connect
i will give you a link in a minute

Remote connection to database server

hi all
i have a scenario which i wanna resolve
i have oracle 10g on redhat linux at office premises and i wanna connect my home pc (windows 7 home premium) to this server to run my application (forms and reports) from home
any help
regards
Hasan

844776 wrote:
other than LAN
i mean remote
via DSL or wifi
I agree with Rafi, you need to have your company set up a vpn-endpoint at the office, and then, using a vpn-client on your home machine, you'll be able to run your applications from home.
A second alternative is connecting a tunnel over ssh to a server at the office, and then send the application traffic through that.
It's wery hard for us to give you any good suggestions without knowing the details of your network, so I suggest that you talk to the IT/IS-dept at your workplace, so that they can help you with this problem.
Brgds
Johan

How to connect to remote sql server database?

Hallo,
I am a new member, so please excuse me if my questions are dummy.
I am using CR2008 SP2 to make reports from sql server 2005 databases.
Localy there is no connection problem and everything works perfect.
I would like to establish a connection with a remote sql server 2005,
but i am not familiar with remote data retriving. which driver should i use? static ip? vpn? server ports?
Any answer will be really appreciated

Hello,
This is more a question for Microsoft to see what and how they support remote connections to databases. As long as you have the connection made CR will not have any problems. You may find it is slow so optimizing your queries is highly recommended. Passing a million records through your web connector is going to take time.....
I've personally used a VPN connection and then set the ODBC or OLE DB connection info to my test server here at work and it worked fine. But they were small data sets.
Thank you
Don

Remote connect to 10G database

Dear,
Hwo can i remote connect 10g database use sqlplus? for example I have a server Ip address is 123.123.0.1 with database name fin. What should i type on host string on remote sqlplus client?
Rg

Assuming you're using TCP/IP protocol and your Client is 10g, you could try using easy connect naming method :
sqlplus <username>/<password>@<host name or IP address>:<port number>/<SID>
for example
sqlplus scott/[email protected]:1521/fin
See http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/naming.htm#ABC524382SRI12

Remote Connectivity Analyzer opens port 443 successfully but fails.."Net. conn. not available"

Trying to set up a client with external access. I just got their Edge off the domain and in the DMZ, and supposedly the appropriate firewall ports are opened. They have a RP running IIS ARR.
Microsoft Remote Connectivity Analyzer (testconnectivity.Microsoft.com) does the following for three tests:
1. When I do Lync Server Remote Connectivity Test and choose Autodiscover, it is able to open port 443 and it validates the cert. But it says "Operation failed because the network connection was not available".
2. When I do the same Lync Server Remote Connectivity Test and manually enter the Access Edge service FQDN and choose port 5061, it is able to resolve the name in DNS but it then fails testing TCP port 5061 with "The specified port is either blocked,
not listening, or not producing the expected response".
3. When I do the Lync Autodiscover Web Service Remote Connectivity Test, it fails when trying to open port 443 on the Lyncdiscover URL.
So, that seems to indicate to me that port 443 might be open on the Edge but not the Reverse Proxy, since that's where the autodiscover URL points. And it seems 5061 is not open but 443 is on the Edge. What else could I check on the Edge to get
443 working?
Thanks for the help and sorry for any vague information. Any help is appreciated!
Brandon

Okay, I can now telnet to lyncdiscover.mydomain.dom on port 443 successfully, and I can telnet to sip.mydomain.com on 5061 successfully.
Now when I do the remote connectivity test:
Using Autodiscover to detect server settings, I get "Operation failed because the network connection was not available". It opens port 443 fine it looks like.
Manually choosing lync.mydomain.com as the FQDN and port 5061, I get "The endpoint was unable to register. See the ErrorCode for specific reason". Response code is 504 and response message is Server Time-out
Doing the Lync Autodiscover Web Service Remote Connectivity Test I get "HTTP 403 error was received because ISA server denied the specified URL".
Looks to me like a rule might not be set right on the firewall if ISA is denying the connection, right?(they are using TMG on a server running Server 2008 as the firewall). I can't ping the reverse proxy from the firewall (but I can ping the Edge).
What else can I check?
Thanks for all the help so far, I really appreciate it.
Brandon

Remote connection with dreamweaver

I tried sideground.com and gave up.
When ipower.com allow to Remote connect to database with dreamweaver....It was piece of cake....so easy and work well.
Now i'm looking for company who allow to Remote connect to database.
Please if anyone out there know the company allow the remote connection...
thanks for reading...Please let me know
James

OK, Now I'm REALLY confused
I gave up on trying to connect Contribute to my website
through Dreamweaver. I figured I'd go back to Contribute and see if
I could get the connection directly from Contribute. Somehow, It
worked. I think I went to Edit > My Connections > Create...
> and entered my FTP information and it worked! I still cannot
connect through DW however.
So far, this has allowed me to continue with setting up this
site with Contribute. I'm still really confused as to what the
problem is with Dreamweaver and Contribute working together.
I'm going to go back and make sure that I can repeat whatever
I did to get it working. The only thing worse than not being able
to get something to work is stumbling upon the solution and not
knowing how you did it
-Ena

Failed to connect to database ONLY at the first time

Hi all, I installed Discoverer 10g version and I'm using an Application User to connect to the server where's the Db is installed.
Every time I try to connect to the server with Discoverer Viewer or Desktop I have a curious behavior....
ALWAYS but ONLY the first time I try to connect I have the following error :
- Failed to connect to database - Unable to connect to Oracle Applications database: invalid username/password.
If I try to re-connect again the second time it works perfectly !!....so, I think, there's nothing related with my .dbc file.
I tried also to write the ':' at the end of the user name....but it didn't work.
Into the pref.txt file doesn't exist a parameter like DefaultUserTypeIsApps to set....
Anybody have had the same "strange" behavior and found a solution or workaround ?
Thanks in advance
Alex

Thanks for your answers first of all !
At the end I found the solution looking at the Note:307167.1 on Metalink:
Discoverer Plus 10.1.2 Fails with ORA-1017 Error On First Login Attempt Then Works On Second Attempt
This note is very useful but into the solution the point 3 is not correct !
3. Modify the servername parameter to indicate the fully qualified servername.domain
Example:
An httpd.conf setting of: ServerName my_servername.mydomain.com should match a Discoverer Plus URL like http://my_servername.mydomain.com:7778/discoverer/plus
I had this problem both with Viewer and Plus...so instead to change the server name parameter (into the Apache/Apache/conf/httpd.conf file) with my complete URL (http://gnvdev.ote.gr:7779/discoverer/plus), I just write my right server name:
Example
After the installation of the Discoverer 1og server, into the httpd.conf file it was written automatyically: ServerName gnvdev
I just modified in ServerName gnvdev.ote.gr and both Viewer and Plus started to work perfectly at the first time.
I hope that this hint will be useful for you and others in the Discoverer forum !!!
Best Regards
Alex

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

Remote connection to database fails

Similar Messages

Maybe you are looking for