Remote control and importing with 65sp1

I have two problems:
1. when I try to import a workstation it comes in as the default which is
computer name and MAC address. even though I have the policy setup as
container name and computer name?
2. when I remote control to workstations I get the 1487 your are
attempting... message I know there is a discussion that said it was fixed
in sp1, but that does not seem to be the case.
I am running 6.5 sp1 for server OS and 6.5sp1 for zenworks. workstations
are 2k and xp running current clients for both.

nobody,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Need help with my Toshiba remote control and receiver for Qosmio G30 161

Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony Worlock

Hi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets

Unable to allow remote control and deny transfer files in RM

Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

Originally Posted by spond
Newellt,
I can't see why it would be necessary, I suggest you open a Service
Request and complain!
Shaun Pond
Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

Qosmio X300 - Remote control and function bar for windows seven

Hi,
I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
Help me plz.
Thanks for reading
(Sry for my bad English)

Hi
The Win 7 drivers are not available for this unit at this time.
But I found some Win 7 drivers on the Toshiba US driver page.
Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
There is no big difference between X300 and X305 so the Win 7 drivers should work too

Apple remote control and PB 17"

I have my laptop hooked up to my TV. I play quicktime and others video media though it to my TV. The Laptop is far from where i sit so to Fast Forward or pause or anything I have to get up and control it from the Laptop.
Is there a way to get the apple remote control to work with the PB 17" sonce it doesnt have a remote sensor like the new macbook pros do? Or any type of remote control or way to do this?
I want to be able to control the media from about 20 feet away (Lazy I know but in theis day and age... )
Thanks,
Joe

Keyspan makes several remotes:
http://www.amazon.com/Keyspan-URM-17A-Express-Remote-Control/dp/B0006OCZLM
As for Front Row compatibility, I don't think that's there, because it would have to break the license from Mac OS X. Equinux makes a nice software like Front Row called MediaCentral:
http://www.equinux.com/us/products/mediacentral/latest.html

Wireless remote control and FM transmitter in one?

Hello.
Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
Other ideas or a combination of products to accomplish this much appreciated!
thanks
iPod 80 GB Windows XP

I spent some time (2 hrs) again with the vendor, trying to solve the issue.
The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
It is quite a surprise that I couldn't find any information on the use (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
Thank you

Remote control and MSI PC-DTV Mega Sky 580

Hello,
I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
Microsoft XP SP2 with current updates.
2x300GB
1GB ram
Intel D820
Onboard graphics and sound
Dust and dog hair arranged attractively around the box!

Hi,
Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
They all work fine but I would prefer a complete set
I

Remote control and MCE remote on Windows

I am having issues with the remote control app on the Tablet S1 and MCE remotes on Windows 7 (64-bit). After learning the buttons for the MCE remote, pressing the same button more than once from the app does not do anything. For example, if I press the Up button the first time, it works fine. But if I press the Up button again, nothing happens. I have verified that the original MCE remote works as expected, and I have also verified that the tablet and the remote control app works with the MCE receiver connected to Ubuntu 11.10. Is anyone else running into this problem? How will the remote control app get updated (via the market or from system update)? Any help would be greatly appreciated. Thanks in advance.

Hello,
Welcome to the User Discussion Forums
If you have issues with the UP button, you can reprogram just the UP button without starting over
Please follow this guide to re Learn an existing button within your Remote
https://us.en.kb.sony.com/app/answers/detail/a_id/34897/c/65,66/kw/34897
If relearning the UP button does not resolve your issue we suggest calling in for assistance.
http://esupport.sony.com/US/perl/suppor ... ype_id=110

Example program for returninng and importing with value addition

HI ,
I want few example programs on how to use the abap oops with returning addition and importing with value addition as Im getting syntax error for the Program when Im declaring them with these additions
Thnaks .

Hello,
This statement declares a general instance method meth. Use additions ABSTRACT and FINAL to make the method abstract or final.
The additions IMPORTING, EXPORTING and CHANGING define the parameter interface of the method. After every addition, the corresponding formal parameters are defined by a specification of the list parameters.
The other additions determine which exceptions the method can propagate or trigger and determine whether the method is abstract or final.
Note
Within a method, you can use the logical expression IS SUPPLIED to check whether an actual parameter was assigned to an optional formal parameter at the call.
Addition 1
... IMPORTING parameters PREFERRED PARAMETER p
Effect
IMPORTING defines input parameters. When calling the method, you need not specify an appropriate actual parameter for every non-optional input parameter. During the call, the content of the actual parameter is passed to the input parameter. The content of the input parameter - for which the reference transfer is defined - cannot be changed in the method.
Use PREFERRED PARAMETER to identify an input parameter p1 p2 ... of list parameters after IMPORTING as a preferred parameter. This specification makes sense only if all input parameters are optional. When calling the method with the syntax
CALL METHOD meth( a ).
the actual parameter a is assigned to the preferred parameter if you have appropriate use of a functional method at an operand position.
Addition 2
... EXPORTING parameters
Effect
EXPORTING defines output parameters. When calling the method, you can specify an appropriate actual parameter for every output parameter. The content of the output parameter - which is defined for value transfer - is passed to the actual parameter at the call after the method has been completed successfully.
Note
An output parameter that is defined for the reference transfer is not initialized when the method is called. Therefore, no read access to it should take place before the first write access.
Addition 3
... CHANGING parameters
Effect
CHANGING defines input/output parameters. When calling the method, you must specify an appropriate actual parameter for every non-optional input/output parameter. The content of the actual parameter is passed to the input/output parameter at the call, and after the method has been completed, the content of the input/output parameter is passed to the actual parameter.
Example
The method read_spfli_into_table of this example has an input and an output parameter, which are typed fully by reference to the ABAP Dictionary.
CLASS flights DEFINITION.
PUBLIC SECTION.
    METHODS read_spfli_into_table
       IMPORTING VALUE(id) TYPE spfli-carrid
       EXPORTING flight_tab TYPE spfli_tab.
ENDCLASS.
Addition 4
... RAISING exc1 exc2 ...
Effect
Use addition RAISING to declare the class-based exceptions exc1 exc2 ... that can be propagated from the method to the caller.
For exc1 exc2 ..., you can specify all exception classes that are visible at this position and are subclasses of CX_STATIC_CHECK or CX_DYNAMIC_CHECK. You must specify the exception classes in ascending order corresponding to their inheritance hierarchy.
Exceptions of the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be declared explicitly, otherwise a propagation results in a violation of the interface. An interface violation results in a treatable exception CX_SY_NO_HANDLER. Exceptions of category CX_NO_CHECK are always implicitly declared.
Notes
The declaration of exceptions of category CX_STATIC_CHECK is checked statically at the syntax check. For exceptions of category CX_DYNAMIC_CHECK, the check is executed at runtime.
In a method in which class-based exceptions are declared with the addition RAISING, you cannot use the statement CATCH SYSTEM-EXCEPTIONS. Instead, handle the relevant treatable exceptions in a TRY control structure.
Example
In class math, you can propagate all exceptions represented by class CX_SY_ARITHMETIC_ERROR and its subclasses from within method divide_1_by. If, for example, the input parameter operand is filled at the call with the value 0, then the exception CX_SY_ZERODIVIDE is triggered, propagated, and can, as shown in the example, be handled by the caller in a TRY control structure.
CLASS math DEFINITION.
PUBLIC SECTION.
    METHODS divide_1_by
       IMPORTING operand TYPE I
       EXPORTING result TYPE f
       RAISING   cx_sy_arithmetic_error.
ENDCLASS.
CLASS math IMPLEMENTATION.
METHOD divide_1_by.
    result = 1 / operand.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
DATA oref TYPE REF TO math.
DATA exc TYPE REF TO cx_sy_arithmetic_error.
DATA res TYPE f.
DATA text TYPE string.
CREATE OBJECT oref.
TRY.
    oref->divide_1_by( EXPORTING operand = 4
                       IMPORTING result = res ).
    text = res.
CATCH cx_sy_arithmetic_error INTO exc.
    text = exc->get_text( ).
ENDTRY.
MESSAGE text TYPE 'I'.
Addition 5
... EXCEPTIONS exc1 exc2 ...
Effect
Use addition EXCEPTIONS to define a list of non-class-based exceptions exc1 exc2..., which can be triggered with the statements RAISE or MESSAGE RAISING in the method. You specify identifiers exc1 exc2 ... for the exceptions to be defined at will and directly. Exceptions defined in this way are bound to the method - similar to formal parameters - and cannot be propagated.
If such an exception is triggered in a method and no return value has been assigned to it in the addition EXCEPTIONS of the CALL METHOD statement in the method call, then a runtime error occurs.
Note
The additions RAISING and EXCEPTIONS cannot be used simultaneously. For new developments starting at release 6.10, we recommend to use class-based exceptions, which are independent of the respective method.
Example
In the class math, for method divide_1_by an exception arith_error is defined, which is triggered in the method with the RAISE statement if an arithmetic error occurs. If, for example, the input parameter operand is filled with value 0 at the call, the exception arith_error is triggered in the method-internal handling of exception CX_SY_ZERODIVIDE and handled after the call of the method by evaluating sy-subrc.
CLASS math DEFINITION.
PUBLIC SECTION.
    METHODS divide_1_by
       IMPORTING operand TYPE I
       EXPORTING result TYPE f
       EXCEPTIONS arith_error.
ENDCLASS.
CLASS math IMPLEMENTATION.
METHOD divide_1_by.
    TRY.
        result = 1 / operand.
      CATCH cx_sy_arithmetic_error.
        RAISE arith_error.
    ENDTRY.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
DATA res TYPE f.
DATA oref TYPE REF TO math.
CREATE OBJECT oref.
oref->divide_1_by( EXPORTING operand = 4
                   IMPORTING result = res
                   EXCEPTIONS arith_error = 4 ).
IF sy-subrc = 0.
WRITE res.
ELSE.
WRITE 'Arithmetic error!'.
ENDIF.
Regards.

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

You can't, you will need to get a new remote.

N8 as remote control and life remote viewer for wi...

I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
Is there any software for N8 Belle ?

You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose.

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Can you manually advance a Captivate slide presentation with a remote control and a projector.

I have published a large volument of PowerPoint presentations with Captivate 5.0 and intend to distribute the presentations to live instructors as a means to control content delivered live by instructors to the students. The files are aggregrated into groups of lessons and published to PDF with a Table of Contents.
We need to avoid manually advancing the show from the laptop.
Having difficulty determining how to use remote control via laptop and projector to advance the next slide or presentation. Can't get it to work. Was able to do so previously with PowerPoint slides converted to PDF shows. Remotes/Laser pointers worked fine. But now that I have processed the shows through Captivate 5.0 can seem to find a remote that will work with the new PDF or SWF with our systems.
We use a laptop and projection system, so need to be able to advance the show to the next "slide" manually and are trying to figure out how to do it with a remote control.
Has anyone else experienced this challenge and did you find a solution?.

Hi Carey,
if you can apply the letter "A" for "next" to your remote control?
Then you could add a shortcut to your buttons in the captivate file.
In deapth:
Go to a PPT importet slide (using the "click mouse" option to continue".
Click somewhere in the screen (clickbox_xx will be selected).
Properties - Action - Shortcut. Click it and press "A".
Click somewhere on the stage.
Now when you press your next button on the remote, Captivate will receive an "A" and continue to the next slide.
Hope this helps
Best
TD

Remote control and importing with 65sp1

Similar Messages

Maybe you are looking for