Remote control and speaker track 60 is not working on c60

Dear team,
We have facing issue for using remote control after
the installation of speaker track 60.remote working fine on another
telepresence equipment and the speaker track 60 is also not on voice
also.kindly please resolve the issue as soon as possiable 

Hi,
Do you have the tocuh panel connected? If yes, disconnect it and try to use the remote control. Otherwise I would recommend opening a TAC case, this might end in RMA, not sure, but might be.
Regards,
Tere.

Similar Messages

  • I has a shipment tracking and the tracking number is not working

    Hello, i just received a shipment notification.But i tried to track the item and it seem the tracking number is not correct.
    Shipping Address
    Yvonne McFadden
    **** NW
    Atlanta GA 30318-4703
    Carrier Name
    UPS
    Tracking Number
    <Personal Information Edited By Host>

    These are user forums. You aren't speaking to Apple here. We cannot help with your problem. Furthermore, you should never post personal information in an open forum. You have provided your address and phone number and full name to any of the millions of users who are on these forums every day.

  • I have a 9300 and the track ball is not working how do i fix this?

    I have a 9300 and the trackball is not working how do I fix this?

    Hi THL1234
    Welcome to Support Forums
    You can try this KB and see if that helps in resolving your problem.If that fails then you may have to replace your  Trackball :
    KB29640 : Trackpad ,trackball, or keyboard not working on a BlackBerry Smartphone.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • HT1414 I accidently turned on my Voice control and now my apps are not working, I cannot even use my phone app to make a call. plz help

    Any advice on how to turn off Voice Control?
    My phone is NOT working because of this.
    PLEASE help
    Thank you

    I have same problem. I can get to Settings > General, but can get any furthrt than Auto Lock! Screen won't scroll or anything. HELP!!!

  • Remote control and MSI PC-DTV Mega Sky 580

    Hello,
    I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
    I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
    I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
    Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
    Microsoft XP SP2 with current updates.
    2x300GB
    1GB ram
    Intel D820
    Onboard graphics and sound
    Dust and dog hair arranged attractively around the box!

    Hi,
    Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
    So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
    It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
    I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
    They all work fine but I would prefer a complete set 
    I

  • HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

    You can't, you will need to get a new remote.

  • HT3211 My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

    My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, take the computer to the Apple store to have it checked out
    and repaired, if needed.
    Best.

  • Remote Control and Remote View Problem

    Hi,
    I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
    Remote Control and Remote View works great but I noticed one problem.
    We have a logo of the school that is forced down on to the desktop when a
    user logs in through group policies. This logo works perfect for the
    desktop wall paper and loads every time a user logs in.
    When I Remote Control or Remote View a computer the users desktop wall
    paper turns from the logo being forced down through group policies to the
    desktop to a blue desktop wall paper.
    I would prefer the desktop wall paper staying the schools logo when I
    Remote Control or Remote View because if the desktop wall paper changes to
    the blue color I mentioned above when I Remote Control or Remote View the
    users computer, they will know that someone is taking over their computer
    which sometimes we dont want them knowing.
    We have Windows 98SE computer running Novell Client 3.4 and we have some
    computers running Windows XP Professional SP1 and Windows XP Professional
    SP2 both running Novell Client 4.91 SP2.
    The Remote Control and Remote View problem of the desktop wall paper
    changing on the users computer occurs on all operating systems mentioned
    above.
    Is there a solution to my above problem? When Remote Controlling and
    Remote Viewing someone's computer I don't want the desktop wall paper to
    change.
    Thanks!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Qosmio X300 - Remote control and function bar for windows seven

    Hi,
    I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
    But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
    Help me plz.
    Thanks for reading
    (Sry for my bad English)

    Hi
    The Win 7 drivers are not available for this unit at this time.
    But I found some Win 7 drivers on the Toshiba US driver page.
    Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
    There is no big difference between X300 and X305 so the Win 7 drivers should work too

  • Wireless remote control and FM transmitter in one?

    Hello.
    Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
    Other ideas or a combination of products to accomplish this much appreciated!
    thanks
    iPod 80 GB   Windows XP  

    I spent some time (2 hrs) again with the vendor, trying to solve the issue.
    The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
    My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
    It is quite a surprise that I couldn't find any information on the use  (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
    Thank you

  • Remote control and windows XP SP2

    I have been creating new images and noticed that when I install windows XP
    service pack 2 that the remote control client fails to load up and I cannot
    control the workstations. Before placing the service pack on,the remote
    control agent on the system tray loads up, but disapears after service pack 2.
    I have seen this on a vairety of different workstations and different
    clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
    client.
    Has anyone come across this problem?
    Glen

    > I have been creating new images and noticed that when I install windows
    XP
    > service pack 2 that the remote control client fails to load up and I
    cannot
    > control the workstations. Before placing the service pack on,the remote
    > control agent on the system tray loads up, but disapears after service
    pack 2.
    > I have seen this on a vairety of different workstations and different
    > clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
    > client.
    >
    > Has anyone come across this problem?
    >
    > Glen
    >
    thanx to Shawn Dakin for this solutions
    1) Change the Windows Firewall/ICS service to manual
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\SharedAccess
    String Value Start = 3
    2) Force Windows Firewall/ICS service to start before Remote Management
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Novell User Agent
    Multi String Value DependOnService = SharedAccess
    NOTE: DependOnService must also contain WM
    3)Set Firewall Exceptions for wuser.exe
    netsh firewall add portopening UDP 1761 ZENRC Enable
    netsh firewall add portopening UDP 1762 ZENRC Enable
    netsh firewall add allowedprogram c:\novell\zenrc\wuser32.exe ZenRC enable
    NOTE We placed the netsh commands in the autoexec.bat of every WinXpSp2
    machine.
    This fixed the problems for us, and allows us to remote control even if
    the user is not connected.
    THIS WORKS WITH ZenWorks 3.2 ONLY

  • Problem with remote control and Windows 7 - HP Pavilion 6301eu

    I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

    Hi John:
    Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
    There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
    I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
    Thanks for your help though and if you have any other ideas, I'm all ears.
    Mark

  • Need help with my Toshiba remote control and receiver for Qosmio G30 161

    Hello to all
    I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
    I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
    Also to confirm I am running Windows XP MCE addition.
    Anthony Worlock

    Hi there,
    this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
    But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
    Please try this tool and check if it works.
    By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
    Greets

  • Unable to allow remote control and deny transfer files in RM

    Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

    Originally Posted by spond
    Newellt,
    I can't see why it would be necessary, I suggest you open a Service
    Request and complain!
    Shaun Pond
    Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

  • N8 as remote control and life remote viewer for wi...

    I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
    Is there any software for N8 Belle ?

    You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose. 

Maybe you are looking for

  • "show in itunes store" command missing from video library

    updated to itunes 11.1, and ios7. This isn't a pro or con diatribe, just a list of the minorish bugs that i have noticed: First (probable?) bug: With the latest update, the (control click) "show in itunes store" command is missing from all video layo

  • Can I turn my G4 and G5 into a TV?

    Once upon a time, I think Gilligan's Island was in first runs, I owned an Apple Performa 638 CD. Came with 8mgs Ram. I splurged and upgraded to 12. What was really cool about this pre-powermac was that had (or has, I still own it and let the kids mes

  • Mac external drive Info to a P.C

    I recently bought a P.C Laptop with Windows 7. I have a simplicity external drive with everything from my Mac backed up on it. Is their a way to get that information onto my new P.C?

  • Directing iTunes to read from different location

    Right now, in restoring iTunes to my new computer, iTunes is accessing the playlist from the following mapping - where "E" is an external hard drive disk: E\Angela itunes\itunes\itunes Music\Artist\CD Name\Track Number Is there a way to have iTunes c

  • How do I resolve error 54

    how do I resolve error  54 on my i- pod touch