Remote Control and Windows 2000 Server

Does anyone know if it is possible to use Zenworks for Desktops to remote
Contol on a Windows 2000/2003 server ?
Regards
Johann Folkestad

OK, thanks.
Johann F
"Marcus Breiden" <[email protected]> skrev i melding
news:19gl0uyoxzfhl$.[email protected]. .
> On Mon, 27 Sep 2004 08:43:58 GMT, Johann Folkestad wrote:
>
>> Does anyone know if it is possible to use Zenworks for Desktops to remote
>> Contol on a Windows 2000/2003 server ?
>
> ZFD will not support RM of a server... you need ZFS for that...
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Similar Messages

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Netbeans and Windows 2000 Server Problems

I've tried to run netbeans on my windows 2000 server OS a few times. It usually doesn't work out and I have to go back to pcGrasp.
Does anyone out there know of any issues between netbeans and this OS. Is it worth it. I'd like to move away from the .net world and learn j2EE but I'd like to move up my IDE. Netbeans seems like the best choice. Does any experienced individuals out there know of a better one?
This was my latest error with netbeans. From just opening a folder??? I also tried to report it - I still have to wait another hour after I registered before I could HOPEFULLY find where exactly I can report it. Maybe thats why there are so many bugs. They make it impossible to report something they tell you to report to help out.
A java.lang.reflect.InvocationTargetException exception has occurred.
Please report this at http://www.netbeans.org/issues.html,
including a copy of your ide.log file as an attachment.
The ide.log file is located in your C:\Documents and Settings\Administrator\.netbeans\3.6\system folder.
Thanks for anything
-Wiley

I use Windows 2000 Professional and have not problems.
I would suggest,
- ensure you have all windows updates.
- ensure you have JDK 1.4.2_04
- try eclipse which is also free (From IBM) http://www.eclipse.org/

Discoverer and Windows 2000 server

I would like to know if Discoverer 3.1 Aministration Edition will work on the windows 2000 server?
Any hint is highly appreciated! Thanks!
Jane

Jane,
Discoverer Admin as well as the desktop work with Win2000. Due to the third party integrator Visigenics visibroker Discoverer for the web is not compliant. NT however is.
Christopher
null

Remote control and windows XP SP2

I have been creating new images and noticed that when I install windows XP
service pack 2 that the remote control client fails to load up and I cannot
control the workstations. Before placing the service pack on,the remote
control agent on the system tray loads up, but disapears after service pack 2.
I have seen this on a vairety of different workstations and different
clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
client.
Has anyone come across this problem?
Glen

> I have been creating new images and noticed that when I install windows
XP
> service pack 2 that the remote control client fails to load up and I
cannot
> control the workstations. Before placing the service pack on,the remote
> control agent on the system tray loads up, but disapears after service
pack 2.
> I have seen this on a vairety of different workstations and different
> clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
> client.
>
> Has anyone come across this problem?
>
> Glen
>
thanx to Shawn Dakin for this solutions
1) Change the Windows Firewall/ICS service to manual
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\SharedAccess
String Value Start = 3
2) Force Windows Firewall/ICS service to start before Remote Management
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Novell User Agent
Multi String Value DependOnService = SharedAccess
NOTE: DependOnService must also contain WM
3)Set Firewall Exceptions for wuser.exe
netsh firewall add portopening UDP 1761 ZENRC Enable
netsh firewall add portopening UDP 1762 ZENRC Enable
netsh firewall add allowedprogram c:\novell\zenrc\wuser32.exe ZenRC enable
NOTE We placed the netsh commands in the autoexec.bat of every WinXpSp2
machine.
This fixed the problems for us, and allows us to remote control even if
the user is not connected.
THIS WORKS WITH ZenWorks 3.2 ONLY

Crystal Repports y Windows 2000 Server

Hi,
I know that Program Crystal repports Basic and Windows 2000 Server it´s not compatible, but it´s possible make to work Addon Crystal Repports and SAP Business One 2005 in a Windows 2000 Server?
SAP Business One 2005 and CR it´s supported.
Thanks.

Hi,
Please check SAP Note Number: 915653, even the B1 would only have limited supported long times ago. Please save your time to upgrade system first.
Thanks,
Gordon

Migrating Users and Groups from Windows 2000 server to Windows 2013 Standard.

OK...let me see if I can get this question out the way I need to....
I inherited a Windows 2000 Server that's on it's last legs. We have a new server, a Windows 2013 Standard machine that we just recently purchased. I need to migrate the users and groups over to the new server, but there are two things that are
making it difficult:
The 2000 machine is NOT a Domain Controller
The 2000 machine is NOT running Active Directory
This is a file server that hangs onto another network of which I have no control of. It has its' own IP address and there is NO WAY we can run Active Directory or make it a domain controller.
I have close to 300 users, groups, and printers to bring over to the new server. Rather than kill myself doing manual input, is there any other way to do this?

Hi,
When you import the CSV file to new server, you need to create a new user account then import the CSV.
http://blogs.technet.com/b/heyscriptingguy/archive/2014/10/01/use-powershell-to-create-local-users.aspx
If you have any issue, i suggest you could ask in PowerShell forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Qosmio X300 - Remote control and function bar for windows seven

Hi,
I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
Help me plz.
Thanks for reading
(Sry for my bad English)

Hi
The Win 7 drivers are not available for this unit at this time.
But I found some Win 7 drivers on the Toshiba US driver page.
Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
There is no big difference between X300 and X305 so the Win 7 drivers should work too

Windows 2000 Server, and 2TB volume

Hey there.
So we recently racked a 7TB Xserve RAID, and plugged it into our Cisco FC switch, and Windows isn't playing nice.
I have a 2.2TB RAID5 volume that I have made available to this Windows 2000 Server (SP4) which Disk Management sees, but says in "unreadable". If I split the volume into two LUNs, it sees both 1.1TB volumes just fine.
Is there a 2TB upper limit to Windows 2000, or is there some cocktail of patches I need to install? I'd rather not have to split the LUNs just do use dynamic disks to make a continuous volume on the server...
Oh, and the volume shows up just fine to the OS X 10.3.9 server which is also plugged into the FC switch...
Oh, and a side question - is there a way to force Mac OS X 10.3.9 server to rescan the SCSI bus (Fiber Channel fabric) for disks without rebooting? I find it annoying to have to call up users and tell them to save / logout when I just want to bring a new disk online...

Then I'd recommend 2003 SP 1
Note, if you do have to slice and then re-assemble the volumes on your 2K server, be sure to do concatenated sets, NOT striped sets, from within Disk Administrator. If you stripe slices on the same RAID set, you're going to cause TONS of extra head seeking, as it tries to read from stripes on different sections of the SAME disk. There will be no performance penalty with concatenated slices, because it will always be reading off all 7 spindles.

Calendar Server and Windows 2000

Hallo,
what have I got to do to run the Sun ONE calendar together with the ldap Server of Windows 2000 Server (Active Directory)?
When installing it says, I will have to update the directory manualy, but I do not know how to do this...
thanks a lot
salamander

I have 2005Q4 calendar, communication express, 2005Q1 messaging server, and outlook connector
I don't think that this is a supported configuration. Outlook Connector expects all the versions to match. It's not likely to work unless it finds that.

Can i setup a secure reverse proxy using sun one web proxy server and windows 2000?

I've tried this on IPlanet Proxy 3.6 and, after reading the documentation, realized that SSL is not supported on the Windows platform. So I'm asking if it is supported using Sun One Web Proxy Server

Hi,
Yes, What you say is right.
"The NT and Windows 2000 versions of iPlanet Web Proxy Server 3.6 do not support SSL".
Sun One Web Proxy Server is as same as iPlanet webproxy server.
May be in future relase of proxy server SSL will be supported in Win2000.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Error -36 connecting to Windows 2000 Server

I'm trying to connect to a windows 2000 server that appears in my Network browser but I can't authenticate using the Network browser or via smb://.
I have been able to connect in the past no problem and I can login to the server on another machine using my user and password.
I get two errors:
If I go via Network browser I can click and get a username and password dialog box. When I enter my details and hit return I get - 'The alias (servername) could not be opened because the original could not be found'
If I go via Connect to Server i get a "can't connect to server blah blah (-36 error)" and I can cancel or try again.
I've searched high and low for a solution but can't find anything like this.
I suspect I need to trash some preference or other, like you could do in OS9, but I have no idea where to start with OS X.
Can anyone help?
Al
G5 Mac OS X (10.3.9)

See the following article
http://docs.info.apple.com/article.html?artnum=301580
Basically the steps are as follows:
Follow the steps below to configure your computer to use plain text passwords to make SMB/CIFS connections when the specified Samba or Windows (SMB/CIFS) server does not support encrypted passwords. (You must be an administrator to do these steps.)
Make sure that you are not currently connected to any Samba or Windows (SMB/CIFS) servers and that you do not have any Samba or Windows-related error messages open.
Open the Terminal (/Applications/Utilities/).
At the prompt, type: sudo pico /etc/nsmb.conf
Press Return.
Enter your password when prompted, then press Return again.
You should see an empty file and a "New File" notice at the bottom of the pico window. If you do not see the "New File" notice, this file already exists.
Enter the following into the file so that it appears as follows:
[default]
minauth=none
Save the file (press Control-O), press Return, then exit pico (Control-X).
Type: sudo chmod a+r /etc/nsmb.conf
Press Return.
Restart your computer.

ZENWSbrowser or C1 - Remote Control on a terminal server

When launching ZENWSBrowser or C1 Remote Control on a terminal server Step 1
I login as user "A" and am able to successfully Remote Control, View, ETC...
any workstation. But while user "A" is logged in to the terminal server,
User "B" or any Other user that logs into the Terminal Server and tries to
remote control, after selecting the WS then selecting Remote Control, View,
ETC... this user "B" gets nothing however User "A" who is still logged in
gets User "B" requested remote control session. Any Ideas?

I could write a small wrapper that killed Java.exe when Desktop4.exe was
launched.
I don't know if that would help you.
If you want me to do that, drop me at note at my email craig_d_wilson at
yahoo.
It would take me all of about 5 minutes.
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCNA
Editor - http://www.ithowto.com
(Seeking Full-Time Expert? Drop me a note :> )
"Toby LeBlanc" <[email protected]> wrote in message
news:[email protected]...
> OK here's what we believe to be the issue. It seems that desktop4.exe
> when run independently or through ZENWSbrowser lauches it kicks off
> Java.exe but doesn't release it. If we kill java.exe process then all is
> well. This does not happen with Console1. I have upgraded to the latest
> C1, Snapins and even tried copying the latest release of Java over the jre
> dir inside the C1 directory. So is Java.exe launched by desktop4.exe in
> server or client mode? There appears to be a switch (-client) for
> java.exe that allows you to launch it in client mode that may resolve this
> issue.
>
> We are going to attempt to upgrade the terminal server to Windows 2003
> so that we can set it to kill java.exe if it is running for more than 15
> seconds or so but this is obviously not a good solution. Besides I hate
> to allow the Microsoft Funkies here to fix my Novell problem with a
> Microsoft solution, it would give them way too much pleasure. Anyone have
> any thoughts?????
>
>
>
> "Toby LeBlanc" <[email protected]> wrote in message
> news:[email protected]...
>> When launching ZENWSBrowser or C1 Remote Control on a terminal server
>> Step 1 I login as user "A" and am able to successfully Remote Control,
>> View, ETC... any workstation. But while user "A" is logged in to the
>> terminal server, User "B" or any Other user that logs into the Terminal
>> Server and tries to remote control, after selecting the WS then selecting
>> Remote Control, View, ETC... this user "B" gets nothing however User "A"
>> who is still logged in gets User "B" requested remote control session.
>> Any Ideas?
>>
>
>

Windows 7 Client with Windows 2000 server

Hi ,
We are having an application developed in Delphi 6 and hosted in Windows 2000 server(sp4) .Recently we have migrated all our clients to windows 7 from XP. Since then we are getting Access Violation error whenever we are using the application.
We are accessing the application through RDP (Remote Desktop ) from Win 7 Clients to Windows 2000 server.
Could any body help me how to resolve this issue as this is stopping the business.
Regds
Vignesh Krishnan B

Hi,
As Windows 7 uses NTLM2 by default, please try to set it to “Send LM & NTLM – Use NTLMv2 session security if negotiated”
How to:
Open secpol.msc -> local policies -> security options -> Network security: LAN Manager authentication level.
Best Regards.
Jeremy Wu
TechNet Community Support

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote Control and Windows 2000 Server

Similar Messages

Maybe you are looking for