Remote control and windows XP SP2

I have been creating new images and noticed that when I install windows XP
service pack 2 that the remote control client fails to load up and I cannot
control the workstations. Before placing the service pack on,the remote
control agent on the system tray loads up, but disapears after service pack 2.
I have seen this on a vairety of different workstations and different
clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
client.
Has anyone come across this problem?
Glen

> I have been creating new images and noticed that when I install windows
XP
> service pack 2 that the remote control client fails to load up and I
cannot
> control the workstations. Before placing the service pack on,the remote
> control agent on the system tray loads up, but disapears after service
pack 2.
> I have seen this on a vairety of different workstations and different
> clients. We are currently using the Novell client 4.83.3.1 SP1 and a 4.9
> client.
>
> Has anyone come across this problem?
>
> Glen
>
thanx to Shawn Dakin for this solutions
1) Change the Windows Firewall/ICS service to manual
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\SharedAccess
String Value Start = 3
2) Force Windows Firewall/ICS service to start before Remote Management
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Novell User Agent
Multi String Value DependOnService = SharedAccess
NOTE: DependOnService must also contain WM
3)Set Firewall Exceptions for wuser.exe
netsh firewall add portopening UDP 1761 ZENRC Enable
netsh firewall add portopening UDP 1762 ZENRC Enable
netsh firewall add allowedprogram c:\novell\zenrc\wuser32.exe ZenRC enable
NOTE We placed the netsh commands in the autoexec.bat of every WinXpSp2
machine.
This fixed the problems for us, and allows us to remote control even if
the user is not connected.
THIS WORKS WITH ZenWorks 3.2 ONLY

Similar Messages

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Remote Control and Firewall WinXP SP2

Does any of you guys know how to prepare WindowsXP SP2 release which would
enable firewall settings when installed?
What is the most efficient way to handle this? I am just trying to prepare
the remote control issue before SP2 is released.
Thanks in advance for your input.
Jeff

hi,
you can open port that is need for ZENworksPORT UDP : 17611762 TCP:
21, 517,1763.
I can remote management a workstation that is a windows xp with sp2 now.
"Michael Rhoadarmer" <[email protected]> дʼ
news:Tnntc.920$[email protected]..
> 1761 1762 1763
>
> >>> Michael Rhoadarmer<[email protected]> 05/27/2004
9:58:35 AM >>>
> We open up 1761,3, & 3 TCP and use [localhost] for the field for computer
host. (inclued the brackets)
>
> >>> JS<[email protected]> 05/21/2004 4:18:35 PM >>>
> Does any of you guys know how to prepare WindowsXP SP2 release which would
> enable firewall settings when installed?
> What is the most efficient way to handle this? I am just trying to prepare
> the remote control issue before SP2 is released.
>
> Thanks in advance for your input.
>
> Jeff
>
>
>
>
>
>

Remote Control and Windows 2000 Server

Does anyone know if it is possible to use Zenworks for Desktops to remote
Contol on a Windows 2000/2003 server ?
Regards
Johann Folkestad

OK, thanks.
Johann F
"Marcus Breiden" <[email protected]> skrev i melding
news:19gl0uyoxzfhl$.[email protected]. .
> On Mon, 27 Sep 2004 08:43:58 GMT, Johann Folkestad wrote:
>
>> Does anyone know if it is possible to use Zenworks for Desktops to remote
>> Contol on a Windows 2000/2003 server ?
>
> ZFD will not support RM of a server... you need ZFS for that...
> --
>
> Marcus Breiden
>
> Please change -- to - to mail me.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Qosmio X300 - Remote control and function bar for windows seven

Hi,
I have bought this PC with Vista x64. I have upgraded it to windows 7 (x64)
But I didn??t find driver for remote control and function bar. The drivers for Vista *64 don't work.
Help me plz.
Thanks for reading
(Sry for my bad English)

Hi
The Win 7 drivers are not available for this unit at this time.
But I found some Win 7 drivers on the Toshiba US driver page.
Of course you will not find exactly the same X300 series but you can choose the drives released for Qosmio X305-xxxx
There is no big difference between X300 and X305 so the Win 7 drivers should work too

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote control and MSI PC-DTV Mega Sky 580

Hello,
I bought one of these recently and initially had problems when installed. It would initially run fine but after I closed the program down and restarted it the PC would just reboot.
I was using the front USB ports so I moved it to the rear ports and removed and reinstalled the drivers/software. It runs just fine now and the quality of the picture superb. I've rerun the device over a few days and all seems okay. I appear to have all the available programs from the Sutton Coldfield transmitter although this morning I booted up and the screen was blank. I realised I had last looked at BBC4 and of course thats only a part time channel!
I've looked at the MSI site at the drivers/Presto PVR updates but I am not sure which of the four I should download and use. In fact as the device is working is there any advantage in doing this?
Lastly... I'm not sure if this is a problem or not but the remote control doesn't work. Reading through the forum I'm wondering if I have the wrong end of the stick and the remote only works with Microsofts MCE. I have Microsoft XP SP2. Does the Mega Sky 580 not have a built in IR sensor and am I wasting my time pointing the remote at it and swearing?
Microsoft XP SP2 with current updates.
2x300GB
1GB ram
Intel D820
Onboard graphics and sound
Dust and dog hair arranged attractively around the box!

Hi,
Okay I have the bundled Presto PVR software so the unit must be faulty. I thought that the remote control and bundled Presto PVR would only work if installed on a PC where the operating system was Media Centre Edition.
So the remote control and bundled Presto PVR should work if installed on a PC with Windows XP SP2?
It looks a bit like I'll have to get a different make. I tried to rescan the channels last night because I was missing UKTV History and now I cannot get BBC1,2,3,4 or radios 3,4,6,7. I get loads of duplicates though like 5 Q's 4 ITV3's. All this on the same aerial I was using yesterday.
I even tried it with an indoor/attic aerial that works nicely with my other freeview (set-top style not PC) boxes but no matter what I tried I just get the same duplicated list of a few channels. Even tried it with the indoor/attack aerial upside down, back to front! Same list of 63 channels but most duplicated.
They all work fine but I would prefer a complete set
I

Wireless remote control and FM transmitter in one?

Hello.
Does anbody know if there is a wireless remote control and FM transmitter in one product out yet for the iPod? I am wanting to keep my iPod in the trunk of my GoldWing and control it while I ride transmitting through the FM tuner.
Other ideas or a combination of products to accomplish this much appreciated!
thanks
iPod 80 GB Windows XP

I spent some time (2 hrs) again with the vendor, trying to solve the issue.
The only result we got is that, when the PC is in suspended status, it can be resumed by pressing "ON" button of the IR Remote Control. That's all.
My suspect is therefore confirmed: it isn't a hardware issue. It lokks like the IR Remote Controller and the PC can talk eachother, but they speak different languages.
It is quite a surprise that I couldn't find any information on the use (Settings? Activation?) of the remote control, nor in the topics of this forum. Really I'm the only one trying to watch TV on the PC? Are there any users of a C540 who can tell me their experience?
Thank you

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Need help with my Toshiba remote control and receiver for Qosmio G30 161

Hello to all
I have a Toshiba Qosmio G30-161 and with it I have a Toshiba remote control and a Toshiba remote control receiver, this is the first time I have used it (tried to that is), my problem is the remote is not working on the computer when I press any program buttons the computer does nothing.
I have installed four brand new AA batteries and the remote works fine its sending signals to the receiver, the receiver the detecting the remote as a red light appears every time you press a button and as for the computer I have checked the drivers and the USB is picking up the receiver as a E-home remote receiver which I have checked with Toshiba and that is correct, so all in all the remote is working, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but this still has done anything. I have spoken to Toshiba help and support and the end result is they are not sure what the problem is. Can anyone help I require the remote for slideshows for customers as I??m a photographer.
Also to confirm I am running Windows XP MCE addition.
Anthony Worlock

Hi there,
this remote contol works, if you use it without any special drivers and special software, only in the Media Center.
But if you install such stuff like [WinLirc|winlirc.sourceforge.net] then you should be able to get some functions for your presentation.
Please try this tool and check if it works.
By the way: If I were you I would first read the Manual and FAQ of WinLirc before starting because its a little bit tricky to handle the program. :) (Too many settings :D)
Greets

Remotely controlling a windows PC

This isn't exactly window compatability, but I thought it fit best in this forum. Anyway. I know it's possible, but does anyone know what software I can use, and how to (or link to a page that will explain) remotely control my windows PC with my PowerBook G4?
Thanks,
-Dennis
15 PowerBook G4 Mac OS X (10.4.3)

You can use Microsoft's Remote Desktop for Mac if the Windows box is Windows XP Pro or Windows 2003.
http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=remotedesktopc lient
Or you can use any VNC client for OS X, like Chicken of the VNC on OS X and realvnc or tightvnc on the Windows end, but that setup is more complex.

HT4352 How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.

You can't, you will need to get a new remote.

Unable to allow remote control and deny transfer files in RM

Hi, we're running ZCM 11 SP1 and I have a question about assiging rights to non-Helpdesk users for remote control only for user application support. It looks like if I deny transfer files that the button for remote control automatically changes from allow to deny. I couldn't find anything in the forums, KB, or docs to see if this is working as intended or a bug of some sort? If intended, do you know why remote control and transfer files go together, just curious? In ConsoleOne versions of remote management we had always limited non-Helpdesk remote operators and were hoping to do exactly the same with ZCM11. Thanks.

Originally Posted by spond
Newellt,
I can't see why it would be necessary, I suggest you open a Service
Request and complain!
Shaun Pond
Was there ever a workaround for this? I'm seeing the same behavior in 11.2.3 and we have a need to block file transfer but allow remote management.

N8 as remote control and life remote viewer for wi...

I am going to buy wifi camera. I would like to use my N8 as remote control and life remote viewer.
Is there any software for N8 Belle ?

You need to contact the camera manufacturer and ask them if they are releasing an app for the N8 for that purpose.

Remote control and MCE remote on Windows

I am having issues with the remote control app on the Tablet S1 and MCE remotes on Windows 7 (64-bit). After learning the buttons for the MCE remote, pressing the same button more than once from the app does not do anything. For example, if I press the Up button the first time, it works fine. But if I press the Up button again, nothing happens. I have verified that the original MCE remote works as expected, and I have also verified that the tablet and the remote control app works with the MCE receiver connected to Ubuntu 11.10. Is anyone else running into this problem? How will the remote control app get updated (via the market or from system update)? Any help would be greatly appreciated. Thanks in advance.

Hello,
Welcome to the User Discussion Forums
If you have issues with the UP button, you can reprogram just the UP button without starting over
Please follow this guide to re Learn an existing button within your Remote
https://us.en.kb.sony.com/app/answers/detail/a_id/34897/c/65,66/kw/34897
If relearning the UP button does not resolve your issue we suggest calling in for assistance.
http://esupport.sony.com/US/perl/suppor ... ype_id=110

Remote control and windows XP SP2

Similar Messages

Maybe you are looking for