Remote control - icons scrambled

I'm running Win98 with Client 3.32SP2 and the desktop icons are not legible.
when I open an app the icons still show through. I tried upgrading the
Client 3.34 but then remote control wouldn't work at all. Any ideas what I
might try to resolve this issue?
Thanks,
Brad

Brad,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Can't get rid of remote control icon

Zen 3.2 SP3
Even though we have our policies set to NOT show the remote management
icon in the system tray, it still shows up. Is there a way to force the
policy to work properly?
BTW, we had the same trouble with 3.2 SP1 (we skipped SP2).
HB

HB,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote control agent icon won't go away

Our ZEN 4.01 agent workstations are fine.
These are on the 6.5 SP1b agent pc's.
The workstation remote agent icon shows up
So I made a NEW workstation policy with the 6.5 SP1b snapins and set it
to NOT show the icon.
I associated it to the workstations container (and thus "unassociated"
the 4.0x policy).
I rebooted the pc and let it login and ConsoleOne shows that it IS
associated to the correct policy. And I've viewed effective policies to
make absolutely sure (the policy for remote control, BTW is under the
General section)
I rebooted the pc again (so that the policy would take effect).
Still no go.
I've enabled the debug logs and the workstation IS imported/registered
(although the AWI on the server doesn't show the "updates", but that may
be due to the log level I chose).
The RMPol.Log file however, shows this:
Finished listeing effective workstation remote control policy . . .
workstation DN -CN=name.OU=workstations.OU=context.O=Org, treename -
TREE
Loading : C:\Program Files\Novell\ZENWorks\WMSchApi.dll
workstation NOT yet authenticated . . .
ZENNDSUTIL: initializecontext() failed . . .
Listing effective user remote control policy . . .
blah blah
Display Agent - 1
This was an "upgrade" from the 4.01 IR4 agent.
(I see someone had a similar error in the agent newsgroup, but didn't
get an answer)
--Kevin

Yep, able to duplicate it.
There's "something" in the 4.91 client that causes the ZEN agent to not
"authenticate" to eDir and I'm not sure what, but at this time I'll open
an incident with Novell.
Ironically, it "comes and goes" when the 4.91 client is installed, but
it never happens (so far) with the 4.90 SP1a client.
--Kevin
In article <[email protected]>,
[email protected] says...
> So I'm investigating the possibility that if you install the ZEN 6.5
> SP1b agent first, let it register and THEN install the 4.91 client (4.90
> SP1a was on before), that it "breaks" something in the authentication.
>
> Possibly NMAS issues.
>
> I've only been able to "duplicate" this on one pc, but it worked fine
> until I put the 4.91 client on it and then the remote control icon shows
> up again and the RMlog shows authentication failure: 1062
>
> Trying to duplicate it on a second machine.
>
> --Kevin
>
>
>
> In article <[email protected]>,
> [email protected] says...
> > Our ZEN 4.01 agent workstations are fine.
> >
> > These are on the 6.5 SP1b agent pc's.
> >
> > The workstation remote agent icon shows up
> >
> > So I made a NEW workstation policy with the 6.5 SP1b snapins and set it
> > to NOT show the icon.
> >
> > I associated it to the workstations container (and thus "unassociated"
> > the 4.0x policy).
> >
> > I rebooted the pc and let it login and ConsoleOne shows that it IS
> > associated to the correct policy. And I've viewed effective policies to
> > make absolutely sure (the policy for remote control, BTW is under the
> > General section)
> >
> > I rebooted the pc again (so that the policy would take effect).
> >
> > Still no go.
> >
> > I've enabled the debug logs and the workstation IS imported/registered
> > (although the AWI on the server doesn't show the "updates", but that may
> > be due to the log level I chose).
> >
> > The RMPol.Log file however, shows this:
> >
> > Finished listeing effective workstation remote control policy . . .
> > workstation DN -CN=name.OU=workstations.OU=context.O=Org, treename -
> > TREE
> > Loading : C:\Program Files\Novell\ZENWorks\WMSchApi.dll
> > workstation NOT yet authenticated . . .
> > ZENNDSUTIL: initializecontext() failed . . .
> > Listing effective user remote control policy . . .
> > blah blah
> > Display Agent - 1
> >
> > This was an "upgrade" from the 4.01 IR4 agent.
> >
> > (I see someone had a similar error in the agent newsgroup, but didn't
> > get an answer)
> >
> > --Kevin
> >
> >
> >
>

I am a newer about LabVIEW.How can I realize a remote control in a Web brower.

"To transform your application into a remote laboratory, make sure the VI that you want to publish is loaded into LabVIEW memory. Next, select the Web Publishing Tool option from the Tools menu. This window is the main window for interactively creating and publishing your remote laboratory
The Web publishing tool will automatically load in the Document Title and VI Name text fields. As the sample image in Figure 6 illustrates, the Document Title, Text 1, and Text 2 are all text fields that you can use to customize the Web page created with the publishing tool.
The second step necessary to enable a remote laboratory is to select the Start Web Server button. When pressed, this button activates the built-in LabVIEW Web server, which will publish and control your front panel images from the Internet.
Once the Web server is activated, the actual HTML document needs to be created and saved so it can be accessed remotely. Clicking on Save to Disk places an HTML file called Document Title.htm into the LabVIEW file folder called WWW by default. Saving your Remote Panels HTML documents into this folder will ensure that the LabVIEW Web server can find them. Either keep the default name, or assign a new name and save the file. Once saved, a new panel entitled Document URL pops up with a message box containing the URL address of your enabled LabVIEW application.
Click on OK in the Document URL window and then click on Done in the Web Publishing Tool window. Your lab is now ready for remote visitors
Required Software
To operate a LabVIEW program using remote panels, it is necessary to have the free LabVIEW run-time engine installed on the client computer. When a remote viewer logs onto the lab with the appropriate URL address, the LabVIEW front panel will appear in the browser, or reroute the user to install the run-time engine from the National Instruments Web site.
Application Control
Once connected to the remote laboratory, the client connection will automatically be in a monitor state. If another client is controlling the remote laboratory, the user will be able to monitor the actions of the controlling client. To request control of the program, right click on the front panel and select Request Control. Once selected, one of two possible messages will appear. Either the user will be granted control (Control Granted), or the user will see a message indicating that control is currently granted to another user (Waiting for control: Either the server is locked or another client has control). If another client has control, the controlling client will be notified that control time has now become limited. Once the timeout occurs or the controlling client has released control, application control is automatically switched to the requesting client (Control Granted). Once the user has been granted control, all icons and controls will become active and running the LabVIEW application is exactly like running the application from the local environment.
Releasing Control
When the remote viewer either moves on to a different URL address or relinquishes control by right clicking and selecting (Release Control), or when the remote laboratory times out, the remote laboratory is available to the next visitor."
The above is what I read from a text of ni.com,
but I can not obtain the result.
Thanks a lot!
^^

Hi
I don't see which LV version you are using. It's important to know, that you need the FDS or PDS package of LV 6.1 to work with remote control. This feature is not supported in the LV base package of LV 6.1.
If you have LV 6.1 FDS or PDS, which of the described steps are not working?
Luca P.
Regards,
Luca

How can I fix the remote control order of the chapters?

I am using the new 6.0 theme of Reflection Black--submenu Chapters. THis gives you two rows of chapters (which shows the looping movies and title of the chapter). I am importing the .mov slideshows in the order I want them accessed with the remote control of the TV (or DVD Player remote), but this is not the case. Instead, when clicking the right arrow on the remote control, the next chapter is not the one laid down in order, but another chapter. (From the first chapter, it skips to the second row, then back to first row, then back to second row.) Basically, the remote does not forward to the next chapter in the order they were imported.
Can anyone help? I have been told by Applecare that the map icons cannot be reordered. But starting a new iDVD project and importing in order does not work. I tried other themes and the ones with lists work and can even reorganize the order for you if you drag and change the position of the chapter!
Thanks

There seems to be some order in some themes, but this particular one has no order. Hoping also to hear of a solution. Applecare said to reinstall iDVD if I can't fix the problem with creating a new project, but I don't think this is the issue, since other themes work.

Remote Control and Contact

how can i contact apple by email, i need to know how to get support on my remote control for ipod mini

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.
If this doesn't help, try restoring it.

Remote Control and Kaspersky

Anyone run into a problem of Kaspersky console not working/responding through ZEN Remote control. I can control everything but if I bring up Kaspersky console it will not respond to rc controls.

Several years later, but I thought I'd post my fix anyway...
Install Kaspersky on a Workstation and define an exception for:
C:\Program Files\Novell\ZENworks\RemoteManagement\RMAgent\Zen Rem32.exe
Export the (fully set up) Kaspersky configuration to a text file and copy it to your AdminKit public folder. Define that configuration as part of your Kaspersky client installation in the AdminKit and you should be able to control the Kaspersky system tray icon on all machines that receive that roll out. That exception won't work as a policy rollout, it has to be included as part of the client at time of installation.

How do I Remotely Control my Canon EOS-1D Mark II Camera?

Hi, I was wondering if anyone out there knew of a driver or a piece of software that I can download to remotely view and remotely control my Canon EOS-1D Mark II digital camera from my MacBook Pro? The drivers that Canon provides only work on PPC platform, not Intel (to the best of my knowledge), and I can't seem to find an alternative. I even tried the trial version of Phase One's Capture Pro, but it didn't work with the camera!
I know this may not be the correct forum to place this question, but didn't exactly know where else to go with it! Please if someone can please help I'd be eternally grateful! The way I have my camera mounted is nearly impossible to accurately view the object through the viewfinder without climbing up the side of a wall!! Any help, ideas, or suggestions will be much appreciated!
Thanks!
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

adholden
Welcome to the Apple Discussions
The PPC software should run on the Intel Machine using the Rosetta emulation. Try it and see. Some cameras can be controlled - at least pics can be taken - via Image Capture (It's in your Applications Folder). From the Image Capture Help:
Many cameras let you take a picture using Image Capture when the camera is connected to your computer.
Connect your camera, and click Download Some.
Click Take Picture.
The camera snaps a picture, which then appears in the window.
If you don't see the Take Picture icon, choose View > Customize Toolbar, and drag the icon to the toolbar.
If the Take Picture icon is dimmed, your camera does not support this feature.
This works with my Canon S2.
Regards
TD

Remote control kicks you out when trying to change the logged in user by clicking on the red N

I'm running Zen 6.5 with the latest updates and the latest agents... I can
successfully remote control a workstation through ConsoleOne but I have 2
issues:
1. If I'm in the middle of a remote session and I right click on the red
N icon and change the user, it kicks me out and says "operation is
currently disabled for the logged in user".
2. Whenever I log in it changes the desktop background to blank (it's
actually a blue background) and it doesn't change it back after I close
the remote session. If I physically go that workstation and logout and
log back in, it still keeps that same blue background.

Gilbert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote Control Doesn't Work in Win-7 !!!

After upgrade operating system to win-7 Remote Control Stop Working !!
and the ENE CIR Already installed ...
but it's still Don't Work
My Remote Details : RC1762302/00
3139 228 50021
Hp SPS :435743-001
HP:HSTNN-PRO7
RC6 IR
cp04 30801 j 064454 REVB
and this pic 4 it http://img44.imageshack.us/img44/971/846610569l.jpg

I too have this exact same issue. The play, stop, forward, reverse buttons don't do anything, and also the sound buttons, they activate the volume window but not adjustment of the volume happens. The only buttons that work are the opening of applications and the power button. All this happened after I installed some free updating software for some other paid and free applications I have (Advanced SystemCare Professional), all quite legitiment, as a result there were corrupt icons and I had to uninstall the offending software and some corrupted software including Microsoft Office beta and reinstall... no viruses were found on a full Zonealarm scan. I have the DV6-2113TX on Win-7. If ANYONE has a clue how to fix the full functionality of the remote, please let me know as it's really niggling me that it just doesn't work even after reinstalling the drivers for the IR etc.
I tried contacting HP online and I get NO replies. I am yet to phone. It is still under warranty with 20 months left (8 months manufacturer, 12 months supplier).
cheers
Jasen

Zcm11 remote control crashes?

We started a ZCM rollout. Currently doing live testing in 1 building. The clients are XP SP3 and server is ZCM11 on OES Linux. I have noticed a problem with remote control after remoting into a workstation and logging on to the workstation i loose connection of remote (it just sits there, it doesn't kick me out or close). if I close it and try to reconnect I am unable to establish a new session. however the computer is on and running. from observation it appears as those the ZCM client is crashing after login (icon disapppears from the task tray). but no errors are logged. a reboot of the workstation renables remote control but that is not a solution as it requires someone onsite.
Has anyone else experienced this or have any troubleshooting tips?
Thanks,
Aaron

Yes, agent is on update 2a.
Originally Posted by craig_wilson
I have not heard this, but are your agents patched at least to Update
Agent 2?
On 9/7/2011 4:36 PM, azuercher wrote:
>
> We started a ZCM rollout. Currently doing live testing in 1 building.
> The clients are XP SP3 and server is ZCM11 on OES Linux. I have
> noticed a problem with remote control after remoting into a workstation
> and logging on to the workstation i loose connection of remote (it just
> sits there, it doesn't kick me out or close). if I close it and try to
> reconnect I am unable to establish a new session. however the computer
> is on and running. from observation it appears as those the ZCM client
> is crashing after login (icon disapppears from the task tray). but no
> errors are logged. a reboot of the workstation renables remote control
> but that is not a solution as it requires someone onsite.
>
> Has anyone else experienced this or have any troubleshooting tips?
>
> Thanks,
> Aaron
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Can't adust the volume using keyboard and remote control

Hi
i have macbook Pro like two weeks and a strange thing happened today. I just can not adjust volume up or down using the F3 F4 F5 keys, must go to preferences and adjust manually. The apple remote control does not change the volme neither. When pressing the relevant key the pop up window appears but nothing happens it does not react and a small not available - restricted icon appears in the bottom of pop up. Please help.

Reset PRAM:
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound (bong) for the second time.
6. Release the keys.
Reset your SMC >>
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

XFI-64 Bit Driver, remote control not work

I have just installed the 64Bit drivers for my X-fi Fatality. The sound works however the 'sound console' that plugs into the dri've bay at the front of my pc does not seem to be working. I press start on the remote control and nothing happens. The X-fi volume icon does not appear in the system tray. When I boot up the 32 bit version of windows all is well and i can use the remote control and all of its functions. Can anyone help as this is now very frustrating.

Originally Posted by MiLoCzE
Hi men, if you will use remote control, you must install ECUP_PCVTAPP_LB_3_40_21 . :-)
What is " ECUP_PCVTAPP_LB_3_40_21 " ?
I searched on the internet and all I could find about it is that it's a virus? Can you tell me something more about that file ?
http://www.pc-face.com/exe-file-erro...exe-fix-22694/

MSI TV@Anywhere PLUS remote control shut down problem

Hi!
I have a MSI TV@Anywhere PLUS card working fine. I use the remote control without problem. Except that, when i want to shut down my PC with it. I push "POWER", the app closes, and after that i push "RESET" and I get this: "Press "Power" to shut down your computer, or any other key to cancel" . But whatever I try to push on the remote, nothing happens...but by the mouse, the OK or Cancel buttons work.
Can somebody help , what is going on?
thanks much!

Hi All,
I solved my problem with some trying, this msi remote is really funny....
Okey, so It appears that, when the above mentioned "shut down or cancel" window comes up pushing the "RESET" on my remote, the remote app. stops receiving commands/stops working. If i close this window, I am able to use again my remote controller. phhhh....
All right, lets use the built-in mouse/pointer controller to click (5) on OK in the window, when it is asking for shut down... NOT working either, because as i mentioned above, when the window appears, the remote stops working... jejeje :D
So, I made a shutdown.exe command icon on the desktop, and I can click on it with my remote...solved...
(the remote controller cannot navigate the cursor above the windows taskbar i do not no why..., besides this, it is ridiculous how difficult to move the cursor with he controller, pushing like crazy :D )

Remote control not starting with window

Hi there
I have a X-Fi? sound card, with a remote control... I just want it to start with windows, but if I check " Acti'vete the RC when Windows Starts" , I still have to do it manually...
I've already tried to reinstall entertainment center, but it has no longer effects on it.
Do you know what I have to do ?
What kind of registry key should I add to get it automatically ?
Or, at least, what kind of shortcut do i have to put in "start" directory ?
Lots of questions, just problem
P.s. : sorry for my english speaking

I had to go through this process when an iCloud shared photostream would not display on the Apple TV screensaver.
Two easy solutions.
When you press the Menu button, does the Apple TV light blink? If not, go to the Second option below.
If yes, begin with the First option below.
First option:
Reboot Apple TV. Hold down the Menu button and the Down button at the same time until the light blinks, then unplug the device for six seconds, and plug it back in.
After the Apple TV reboots, see if your remote is working. If not, continue to the second option.
Second option:
Un-pair the remote, then re-pair the remote.
To un-pair it, hold down the Menu button and the Left button at the same time until an icon appears on the screen showing a remote with two cloud-like icons. That means the remote is un-paired.
To re-pair the remote - or to pair it with the Apple TV for the first time - hold down the Menu button and the Right button at the same time. It should pair with the Apple TV almost immediately.
Both options have worked for me, when occasional Apple TV issues happen.

Remote control - icons scrambled

Similar Messages

Maybe you are looking for