Remote Control No longer works after 10.3 upgrade

I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.

Originally Posted by donasutton
I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.
If the problem persists, contact Novell Technical Services :)
Thomas

Similar Messages

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

Voice control no longer works after upgrade to iOS 4

Everything about iOS 4 has been great so far on my 3Gs, except that voice control no longer works. Holding the home button still brings up the voice control, and the "voice" confirms whatever action I say, but then instead of doing whatever it is supposed to, the phone just goes back to the home screen. Everything in voice control worked fine before I updated to iOS 4, so obviously it is a software issue. Has anyone else having the same issue?

I'm having the same problems. I have a 32GB iPhone 3GS which I upgraded to iOS 4.0 (previously running 3.1.3).
I've tried a full restore as well as changing the Voice Control language settings in General > International > Voice Control. I'm English and based in the UK and had my Voice Controls previously set to English (British). The weird thing is if I set my Voice Control to English (American) and then impersonate an American accent - then it works fine! Change it back and it's just the same - takes an age to finish recognising anything and then it's nowhere near what I said.
Hope that info helps out in diagnosing the problem.
J.

Remote Control no longer works

Sometime in the past year, my apple remote stopped working with my Macbook Pro. None of the buttons work 99% of the time. It used to be that just clicking the menu button on the remote took me to Frontrow, but this doesn't work anymore. Once in a great while, I'll test the remote by pushing the menu button, and Frontrow does start (1 out of 20 times maybe). But after it has started, the remote goes back to not functioning.
The remote itself seems to work fine: I used the camera to see the IR signal flashing, and pushing any button on it always wakes up the sleeping macbook that's sitting across the other end of the room.
The IR receiver on my macbook pro also appears to work fine: I took the MBPro to an apple store, where they booted up from an external harddrive and had the apple remote work just fin.
So the problem appears to be localized to a software issue on my macbook.
I'm not sure what software I've installed since it stopped working. The biggest change was an upgrade to OSX 10.6 from 10.5.
The only hint I have that some piece of software running in the background is interfering is that when I turn on Hulu Desktop (which I used to use with my apple remote all the time with no problem) I get a warning that says "You appear to be running another third-party application that utilizes the apple remote hardware. you may wish to close that application if you experience any problems using your remote in Hulu Desktop". The problem is that I have no idea what this third-party application might be.
Using Activity Monitor, I've systematically gone and deleted every process that is running (and that I think is non-essential). But this method didn't get me any closer to finding the culprit. Unless the culprit is my antivirus program (Sophos) because there are processes running from it which can't even be forcequitted.
here is what I have starting up when I login:
Quicksilver
GrowlHelperApp
iTunesHelper
AppTrap
GrowlMenu
Xmarks for safari
Dropbox
SophosUIServer
here are the (3rd party) applications I've installed that I'm pretty sure make use of the apple remote
Boxee
Hulu Desktop
Miro
PandoraBoy
Plex
The last thing I want to do is Reinstall the OS from scratch (getting all of my work related software, photos, music, etc back to normal would take hours of time that I just don't have). Any suggestions about what I could try next would be GREATLY appreciated.

I've found the problem.
These applications (boxee and plex specifically) are configured to hijack the apple remote to make the menu button open them instead of frontrow. So the problem I had was 2 fold.
First: The applications were competing with each other for control of the remote. Since I had them both installed, and they were both configured to keep tabs on what the remote was doing, they were both competing for the remote IR and it was causing problems. Deleting Plex fixed this issue, but I could have just as easily reconfigured the settings on both of these applications to ignore the remote IR when the applications were not running (which is what I have now done with Boxee).
Second: Both applications were running on an older version of the Remote IR (which was updated when snow leopard came out). So in their attempt to hijack the menu button on the remote using the old driver software, they were locking the whole thing up. To fix this problem, I downloaded a program called candelair which allows software to interact with the remote using a kind of legacy compatibility mode.
Now, the remote behaves normally when Boxee isn't running (so I can use it to manipulate itunes, Hulu Desktop, and MS Powerpoint with no problems). And when I've got Boxee running, it works with that just fine.
Here's hoping that this solution helps other people out in the future.

EM dbconsole no longer works after RHEL 4 upgrade

I'd been running oracle 10.1.0.3.0 and the EM dbconsole on rhel 3 WS/x86_64. After upgrading to rhel 4 WS (with non-redhat kernel 2.6.13-rc6), the database runs fine but dbconsole doesn't work. 'emctl start dbconsole' takes a long time to run. Connections to port 5500 time out; both emagent and the java httpd process are running though they tend to die after 30 minutes or so.
I do see lines like this in emagent.trc
2005-08-24 10:50:13 Thread-491528 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2005-08-24 10:50:43 Thread-491528 ERROR pingManager: nmepm_pingReposURL: Error in request response. code = 400. text =
2005-08-24 10:50:43 Thread-589832 ERROR upload: Error in uploadXMLFiles. Trying again in 176.00 seconds.
2005-08-24 10:50:45 Thread-606216 ERROR upload: Error in uploadXMLFiles. Trying again in 211.00 seconds.
2005-08-24 10:51:10 Thread-622600 ERROR upload: Error in uploadXMLFiles. Trying again in 253.00 seconds.
Any suggestions?
Alex

Originally Posted by donasutton
I have begun pushing out ZCM 10.3 to my infrastructure and I'd like ask WHY the Remote Control Policy no longer works.
The managed device was unable to initialize Novell encryption scheme for the session. Ensure that the managed device is UTC time synchronized with this system. If the problem persists, contact Novell Technical Services
I had a clone with ZCM 10.2.2 which i upgraded to 10.3 and sent it back to my ZENimaging servers.
What is going on here?? Why does this not work?
Crippled help desk and p!ssed off Network Admin.
If the problem persists, contact Novell Technical Services :)
Thomas

Netboot no longer working after 10.6 upgrade

So I updated my 10.5.8 server to 10.6 recently, everything looks to be just dandy except that my netboot server no longer work.
I've used apple's trouble shooting guide and as well as bombich's, but still to no avail, I've checked the bootpd file, I even went as far as editing the nfs.conf file from macosxhints (link below)
http://hints.macworld.com/article.php?story=20100203124656707
below is a recent log:
Aug 30 16:06:41 120msod01 bootpd[1010]: server name 120msodxx.xxx.xxxx
Aug 30 16:06:41 120msod01 bootpd[1010]: interface en0: ip 10.5.0.57 mask 255.255.252.0
Aug 30 16:06:41 120msod01 bootpd[1010]: dhcp: re-reading lease list
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: re-reading configuration
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: shadow file size will be set to 48 megabytes
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: age time 00:15:00
Aug 30 16:06:41 120msod01 bootpd[1010]: service time 0.000012 seconds
Aug 30 16:06:41 120msod01 bootpd[1010]: service time 0.000002 seconds
Aug 30 16:09:16 120msod01 bootpd[1010]: service time 0.000028 seconds
Aug 30 16:09:16 120msod01 bootpd[1010]: service time 0.000007 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000009 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000002 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000014 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000007 seconds
Aug 30 16:11:39 120msod01 bootpd[1010]: service time 0.000019 seconds
Aug 30 16:11:39 120msod01 bootpd[1010]: service time 0.000008 seconds
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP DISCOVER [en0] 1,c4:2c:3:8:46:c6 NetBoot006 arch=i386 sysid=Macmini4,1
Aug 30 16:11:58 120msod01 bootpd[1010]: replyfile /private/tftpboot/NetBoot/NetBootSP0/SL_FullSuite.nbi/i386/booter
Aug 30 16:11:58 120msod01 bootpd[1010]: reply giaddr 10.5.12.3
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP OFFER sent [1,c4:2c:3:8:46:c6] pktsize 372
Aug 30 16:11:58 120msod01 bootpd[1010]: service time 0.000777 seconds
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP DISCOVER [en0] 1,c4:2c:3:8:46:c6 NetBoot006 arch=i386 sysid=Macmini4,1
Aug 30 16:11:58 120msod01 bootpd[1010]: replyfile /private/tftpboot/NetBoot/NetBootSP0/SL_FullSuite.nbi/i386/booter
Aug 30 16:11:58 120msod01 bootpd[1010]: reply giaddr 10.5.12.2
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP OFFER sent [1,c4:2c:3:8:46:c6] pktsize 372
Aug 30 16:11:58 120msod01 bootpd[1010]: service time 0.000399 seconds
Aug 30 16:11:59 120msod01 bootpd[1010]: service time 0.000018 seconds
Aug 30 16:11:59 120msod01 bootpd[1010]: service time 0.000007 seconds
I wasn't getting this far (/tftpboot line) until I turned on the firewall to allow port 69 traffic but it seems that the service hangs when the client machine is supposed recevie the payload of the diskimage.
I don't know how a perfect netboot service goes to $h*t after a clean install with no configuration changed. I've verfied that nothing with our dhcp service nor dns has been changed and also verified that the server name has been added to the ip_helper.
Any help is greatly apperciated.

My experiences with netboot on snow leopard server and a few other observations: Point 1 - Never have wireless on whether it be client or server when trying to netboot client. Point 2 - Must use standard mtu setting -1500- on server under prefs. ethernet advanced, doesn't seem to matter on client -I use 7936 for 600TL Readynas on clients only-. Point 3 - It seems that if you ever use wireless on the server it messes it up for good -Took about 8 installs to learn this the hard way-. Point 4 - It seems when logging into workgroup manager with default popup of machine name.local and default user name messes server up if you have a domain name, example of how it should be is: machine name.domain name.com, org, etc. Then username would be diradmin, then password ***** so that settings will hold if you go in to change anything. Many days were spent by a friend and myself learning these few things pertaining to my machine and may help others with weird problems on snow leopard server. If anyone here knows why this is, please post, although my machine is working properly, I am curious. Thank You. By the way, I am using all the latest updates except itunes 10.

Mail App no longer working after 2.0 upgrade

I upgraded to 2.0 on my IPhone Edge and now my mail application no longer works AT ALL. If I try to open it, it simply shows me a blank mail screen, waits for a few seconds and then returns to the home screen. Strangely enough, I have been able to send email photos using the camera application.
Email is the most important application for me on the iPhone! Has anyone encountered this problem? Is there a fix available?

I recently stopped by the apple store and have fixed my mail app! The problem as described to me was caused by a installing apps. Turns out that apps can mess with Mail setting in some way and perhaps due to a bad setting or a bad combination of settings my mail application stopped working. The way I fixed it was to do a restore to New Iphone which, unfortunately, wipes everything! But after syncing back up including re-installing all of my apps, mail works again! Of course, I lost all of my notes, various settings, and lots of other stuff. Turns out that a simple restore, since it backs up your phone beforehand (backing up bad settings at the same time) is not the silver bullet but a full restore to new iphone probably often is. Hope this helps others.

Keyboard, IR, Trackpad no longer work after 2.1 upgrade

Installed the BootCamp 2.1 upgrade and after the reboot, the keyboard, trackpad and IR receiver no longer work.
Windows recognizes the hardware (Found New Hardware) but during driver install, the dialog box pops up to say that Windows couldn't install the driver (Fatal error during installation).

I also just made the mistake of installing 2.1 and am having the same problems. The built-in keyboard and trackpad don't work, and my external keyboard doesn't work either. An external mouse works, but that's all.
***? Is it possible to downgrade to an earlier version?

Client proxies no longer work after R/3 upgrade to ECC5.0

Hi,
After the above upgrade where WAS of the R/3 systems went from 620 to 640 client side proxies no longer work.
To be able to use client proxies in 620 we had to use a plugin. But in 640 this should be native functionality, so no more plugin for this.
The error seems to lie in the connection from R/3 to XI. If I test the RFC connection that is defined in SXMB_ADM on R/3 I get the following error:
HTTPIO_PLG_ICM_CONNECT_FAILED-Fehlermeldung beim S
Message no. SR000
The IFR address is correctly defined.
The SPROX_CHECK_HTTP_COMMUNICATION test in sproxy-connection tests gives the following detailed info:
When calling the method
CL_HTTP_SERVER=>GET_EXTENSION_INFO
the exception
NO_HTTP_PING_SERVICE_FOUND
was triggered.
Does anyobe know how his can be solved?
Thanks
Tom

HI,
I think some problem with http destinations
Is your R3 system is configured as a Application system ?
Go to SXMB_ADM->Integration Engine Configuration->Check role of business system etc. and corresponding Integrtaion server
Check this guide page no-27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

DVR Search Option No Longer Works - After The Crap Upgrade

The new software upgrade is crap. DVR search option no longer works. I can't use the search option to find my favorite programs and set the DVR to record them. It only lets me put the first letter in the search field and then nothing. I can't enter any more letters aftet that.
Verizon sent me another DVR but it has same issues. They sent a technician to my house and he basically told me, the upgrade is crap and lots of people are having technical issues.
He gave me another box and said it is working. Now I have three DVRs sitting in my house and I have to return two. After he left I tried to search and I have the same exact issue so basically he just lied and didn't fix anything.
I called tech support over and over, and they just told me that they can't do anything. They basicaly admitted that the upgrade is crap and the are clueless on how to fix it. So I'm stock with 3 DVRs that don't work. Billing department told me they can't give me any discounts either.
Anyone else is having these issues?

Same issue here. Sent me another box, same model as the old one. Same exact issues. Called Tech support back, they admitted it was a known issue, and nothing he could do about it. Was told I had to talk to someone in SALES to get them to send me a newer box.
New box is here, and now i have no option to record. Oh, and last time I called tech support... I got 'disconnected' (after being on hold for 30+ minutes). They are really dropping the ball, and I will not be renewing.

Home button on iPad2 no longer works after iOS 7 upgrade

I upgraded my iPad2 to iOS 7 today. The home button no longer works. I've powered it down and back up as well as restarted it but it's still not working. Any suggestion greatly appreciated.
About to fly to China and was looking forward to watching movies and reading on the long flight.
Thanks!

Hi SUSOA!
Try using the steps in the following article to address this issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

TMs no longer work after 3.0 upgrade

I have a 1-1/2 year old iPhone, the original one. I upgraded to 3.0 this morning.
My text messaging no longer works. Has anyone experienced this?

I too have the first gen iPhone. the problems we are having has to do with all the new iphone activation as of late, since the 3G is only $99 and the new 3GS is available. It will all get better. We wouldn't have this problem if the iPhone was availabe for all couriers. Hang in there.

Isight no longer works after snow leopard upgrade

my isight no longer is available directly after snow leopard upgrade on my macbook black. Anyone else with the same problem? The isight does not show up in 'about this mac' under USB and I tried resetting SMC and PRAM.

Hi,
In Leopard there was an App called iSight Update app that was in Hard Drive/System/Library/Core Services
This does not seem to be there in Snow Leopard.
An issue with some computers with the camera was that in System Preferences > Displays the Colours needed to be set to Millions.
Also check the Hard Drive/System/Library/Extensions folder and see that you have the Apple_iSight.kext (this is likely to handle the Internal iSights as well).
One last thing.
Some Web sites can make use of the camera using Flash.
If that tab is still open the Browser may have use of the camera.
It sounds like you have done computer restarts and this will not be the case unless the browser is set to go back to that page.
7:26 PM Sunday; August 30, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

IPhone remote app no longer working after iPhone update to version 4.2.1

I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
"Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
Home sharing is enabled on all the Apple TV devices
I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
Suggestions ?

Update:
Issue is still occuring, after resetting wireless router.
Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,

same issue iphone 4

Remote Control No longer works after 10.3 upgrade

Similar Messages

Maybe you are looking for