Remote control plays wrong track!?

hi, i have set up a DVD with four buttons playing 4 tracks, each of which has 1 chapter (or clip) and returns to the menu after playing. after i've burned the DVD and placed it into the DVD player, pressing the numbers 1 through 4 however causes the wrong tracks to play: for example pressing "1" plays track 1, pressing "2" plays track 3, "3" plays track 4, and "4" plays track 2!
I originally had the tracks arranged differently, where in the menu button 1 one was actually playing track 4, for example. but when i noticed this problem i went back and set it up so that track one contains clip 1, 2 contains 2 etc. hoping the problem had something to do with that.
it did not solve the problem...
can anyone tell me what i am missing here? i simpy want to have each corresponding track play accordingly when i click its number on my remote...
thx in advance for any help!
frank

so the final question then is are all the assets in different tracks, and if so, what order are they in when you look in the outline view (top to bottom)?
ok, in outline view all tracks align (1-4) vertically, and each opens the appropriate asset in the track wiindow (bottom middle) when highlighted. so all seems logical right?
so i burned another one (fresh build - no recycled versions) and stuck it in the player - what happens? whn i am looking at the menu, and press "2" the dvd plays track 3... same problem, but check this out:
if i am watching one of the tracks (say 1) and i press number 2 on the remote the dvd jumps to track 2 (i.e. NOT 3) as it is supposed to... this works for all the other tracks also)
so it seems the incorrect jumping occurs only from the main menu.. though as far as i can tell that is clean. BTW this time i deactivated "auto assign" in the Menu> Settings pulldown before the build)
hmm

Similar Messages

Universal dock remote control play/pause button doesn't work

Hi all,
Ok since updating to Ipod touch software v2.2 I have been unable to use the play/pause button on my Apple universal dock remote, whilst my iPod touch is in the dock.
The volume controls and track next and previous buttons commands on the remote control work just fine.
I have tried unpairing and then pairing the remote with the universal dock but same issue. I thought that maybe the play/pause key was possibly broken. However I tested the remote on my iMac and play/pause button works fine in front row.
Any ideas/suggestions would be much appreciated.

Strange thing is mine started working again last night and is still working. Seems the problem went away as it originally appeared. I hope it doesn't stop working.
I will mark this thread as unanswered until we can figure why the remote, universal dock and iPod touch are behaving this way.

Remote control and speaker track 60 is not working on c60

Dear team,
We have facing issue for using remote control after
the installation of speaker track 60.remote working fine on another
telepresence equipment and the speaker track 60 is also not on voice
also.kindly please resolve the issue as soon as possiable

Hi,
Do you have the tocuh panel connected? If yes, disconnect it and try to use the remote control. Otherwise I would recommend opening a TAC case, this might end in RMA, not sure, but might be.
Regards,
Tere.

Dell Remote Control - What wrong?

Hello, my English is not very good, but I would like to ask.
I have a dell xps 16 and irda remote control. I do not know him to run.
Any ideas?

What do you want to use the remote control for? Pause/play during music/video?
Anyway, the LIRC project is to support remote controls in Linux..
More info: https://wiki.archlinux.org/index.php/LIRC

Remote control play/pause gnome

ok so i have just installed Gnome and tried to use the remote control that ships with my compro videomate T750, i can use the volume fine but when it comes to pausing a movie in say smplayer all i get is a ring with a line through it. i know the control works as i use it with LXDE and KDE with no issue at all, i have tried setting keyboard mapping and when i press play/pause the mapping is accepted however when i try to use it it wont work.
anyone have any suggestions / experiance with this issue.
Thanx
EDIT.... have just discovered that the pause button on my keyboard also is not recognised (maybe linked)
Last edited by wiggly (2013-07-11 15:41:33)

yes i tried last night and totem and rythmbox both work. i would have liked to stick with smplayer and maybe i will look for a plugin or something later but for now it seems to be working. however as the original post was regarding a non standard gnome media player i shall hold off marking it solved until either i find or am informed about a work round.

Remote Control Play doesn't activate selected button

Hi,
Super new to the Studio Pro Apps, and I'm almost finished with a DVD Pro disk, except the "play" button on the remote on the screen doesn't select the highlighted menu item while running a simulation. I checked to make sure the button was linked to a target, and I don't know what I "did" or "undid" so this doesn't work on the main menu.
Please help? (Thanks) And why oh why did they screw up the community? It wasn't broken, but now it sure is and I can't find anything.

In case anyone else stumbles upon this, I'll let you in on DVD Studio's screen remote's play function does not work in the simulation, when I burned a DVD and tried it out in my DVD player, it worked fine.

[Bug] Spotify plays wrong track at startup.

Hey guys, I'm not quite sure if this is a bug, but this is what I found out:I usually just hit shutdown and do not close spotify via the red x button, I assume most of us do. But when I start my computer again, and spotify opens with Windows, the current track is not the last track I heard, its the last track I heard and then officially closed. So when I hear now song X from artist Y, and close my Spotify accuratly, then I am able to hear it once i restart my computer, but without closing Spotify accuratly, so just shutdown, I hear song A from artist B, which was the last track I heard and then closed accuratly. I hope this is explaining enough, im not mother speaker in english. Ask if you have questions!

I have the same issue. Also, when playing songs from "Popular" it plays the equivalent track number on the first album.
This seems to occur on the first album I play when starting Spotify. Going to another album resolves the issue and going back it's working as intended again.
Are you storing info from last played artist/album on shutdown and restoring it upon startup? Somehow the index on track-collections of last played artist seems to be +1 on startup.

IPod plays wrong track

Hey!
I have searched but not found this problem. My IPod Nano will not play the right tracks. I press one track but it displays and plays another.
Yes, I have cleaned, reset, restored and updated iPod and iTunes.
I have an iPod Nano 4th gen and a MacBook Pro. I have these two as stand alone music making kit. I have few songs in iTunes appx 50.
Catch?! I use Logic to make a new track and I bounce it directly to iTunes.
I sync my iPod. New Track appears in my iPod. I press play and it shows ANOTHER TRACK and plays that other track!
I seems to work fine within iTunes. Bouncing tracks from Logic to iTunes makes appear and play correctly.

My wife and i have the same problem, each on different ipods and with different computers. We can't use your 'AAC' solution as the files are protected. The files/tracks--in this case audiobooks--play fine in iTunes and my music and podcasts have never had a problem. I've restored, upgraded, and I now even have a new Airbook running 10.6.1 and iTunes 9.0.2. The tracks/books play fine if they are loaded by themselves--even the different 'parts' of each book plays ok--but as soon as another book is loaded on the track I click on to play is not the one that ends up playing. Any suggestions out there?

(CS3) Play Button vs. Enter Button on Remote Control

Hello all-
I'm hoping the answer to this is something so obvious I couldn't help but overlook it. However, after lots of searching I still can't figure it out. Any input would be great. Thanks!
I have an Encore project with 1 menu, containing 1 button, pointing to 1 timeline. Very simple in nature. However, both in the virtual preview and on an authored disc, the remote control does not work as hoped. I find that I have to use the 'enter' button (usually between the up,down,left,right arrows) in order to play the track. The 'play' button does not work for some reason. I have the button set to auto activate so that it's selected upon the menu loading. But whether this is the case or not seems to have no bearing on the result.
I unfortunately have to dumb it down as much as possible because some of the people seeing this won't think to hit 'enter'.
Any help would be terrific. Thanks!
Justin

On menus, the Enter button is what is supposed to be pressed to activate a button. However, some players will also accept the Play button being pressed to activate the button. But not all players will activate a button when you press Play.
For instance, I have a Sony that will accept Play to activate a button. But my Pioneer will not. And my Sony PS3 will not.

How can I remotely control what iTunes song my iMac is playing to multiple AppleTV's?

So I own an iMac that has homesharing enabled. I then tell the iMac to play to both of my AppleTV's by holding OPTION key down while clicking on Airplay, and checking off the devices that I want it to stream to filling my home with sound that is in sync in every room. Works beautifully. Only problem is that I can not then control the iMac remotely from let's say the bedroom to pick a new artist. The ATV's become dumb clients simply playing what the iMac is pumping to them. Is there a remote interface that allows me to control iTunes on the iMac to choose the sounds being broadcast to the other Apple devices?
NO. VNC is a ghetto work around to accomplish this. Yes, I could do that, but it is inefficient, and inelegant. I am looking for a remote control app with the functionality that allows me to connect to and see the device that I want to control, and then by choosing my iMac, see all artists/albums/songs, play them and let the iMac pump the tunes to the devices that I told iTunes to Airplay to.
Ideally, the AppleTV's should know that they are acting as clients to the iMac serving centrally, but when I pick up an AppleTV remote, it overrides the stream from the iMac, and then the ATV begins streaming independently from the other. I KNOW there is a solution to this...
Any suggestions?
Thanks!
Adam

ok... solved it. By using the Apple Remote app, you can tell the app to control your iMac (I did not know that) and that solved the issue. Now the iMac plays the song I want to all of the devices that I told the iMac to play to. Perfect.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

TS3186 My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! Th

My docking station wont play my ipod..... the ipod works fine on its own but when I try to play via my hifi I have to put the sound full wack to be able to hear it & its not very lound at all. It does not respond with the remote control either!! The sound is ok if I play CDs & respond to remote control fine... The hifi & docking station are Sony

1) When I go to the apple.com website my computer will either be really slow or freeze my whole system down to where I have to reboot my computer again. This does not happen all the time but when it does operate it is molasses slow.
By any chance, are you uswing Kaspersky security software?
If so, see:
[With Kaspersky Internet Security 2011 installed on my computer the website apple.com is imaged incorrectly. What should I do?|http://www.kaspersky.com/support/kis2011/all?page=14&qid=208282422]

Itunes 12 won't play any tracks. Selection appears in box at top of screen, but won't play and time doesn't count down. Controls have no effect.

Itunes 12 won't play any tracks

Hi there Wellington451,
Welcome to Apple Support Communities.
It sounds like there is an issue playing audio tracks in iTunes on your PC. Take a look at the article linked below, it provides a lot of great troubleshooting tips that’ll resolve most issues like this one.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly - Apple Support
Cheers,
-Jason

Zen Touch optional wired remote control to play FM radio how do I get it? or can it work without

One of the reasons why i am thinking of buying a zen touch is becuase it has a FM radio built in. From the website it says you need an optional wired remote control to listen to the radio, where can i get one in the uk? or can it work without it's

The Zen Touch doesn't have a radio built-in. You'd need this:
http://uk.europe.creative.com/shop/category.asp?cate=5
The Zen Micro does have an FM tuner built-in.

How to use the remote control in MediaSource Audio Play

Hello,
I bought myself the Creative X-Fi Elite Pro.
I found out that I only can use the remote control in Media Center of the software.
Now I want to use it in the Creative Audio Player whicht was also in the Box.
Is there a way?

Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
Just my two opinionated cents...

Remote control plays wrong track!?

Similar Messages

Maybe you are looking for