Remote control via Airport express

I am looking for a remote control for my music via Airtunes other than the premote app for the Iphone/Itouch. Keyspan has a solution but it's really old and I'm hoping to find a more updated solution. Ideally, I'd like to have a screen that will mimic my Itunes interface so I can scroll through my music. It's a shame that Apple doesn't have a remote to do this.
Thanks for any help

Hi Sean,
I basically was in the same situation as you - too lazy to get up and walk to the computer with my music library
The only way I found to do this was using Apple Remote Desktop which unfortunately is too expensive (for me certainly) to be a solution in this case.
Sorry I can't really help, but at least you know you're not alone!
Fraser

Similar Messages

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

ITunes 8: I can no longer connect to remote speakers via Airport Express

Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility
I get the following error code (-3256) Apple KB research says:
AirTunes: Error -3256 when streaming to multiple AirPort Express units  You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic. http://docs.info.apple.com/article.html?artnum=303157
I followed the KB link, tried KB solution, then I sent this off to Apple.
"Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
Cannot connect to my remote speakers, worked before iTunes 8"
I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
My G4 PowerBook running an earlier version of iTunes connects without problem.

I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

Using Bose system to drive remote speakers via Airport Express / iTunes

I want to connect my Airport Express which is configured for remote speakers in iTunes to my Bose system. My question is which input on the Bose Lifestyle 50 system do I use; ie which input on the "multi-room interface" do I connect to the AE. I think it must be the "aux" but before I buy a suitable cable I would like to be sure.

Use a mini-jack to double RCA. That is all that I used. In the past I have used my APExpress and used the audio out port and all I needed was a mini-jack to double RCA.I have a TV, and a DVD player interfaced through my Denon AVR driving Bose Acoustimass 10 speakers.
MJ

Remote speakers via Airport Express no longer working on one iTunes instance

I have iTunes on my iPhone, Windows desktop, and Windows laptop. At one time they all connected to my Airport Express with remote speakers attached. At some point, after a version upgrade, my laptop no longer sees the remote speakers while the other devices work fine. I can connect to the Airport Express from the laptop, there is no connectivity issue. I can even use the Apple Utility to read/change the settings.
How can I get the remote speakers working again?
Thanks, Andrew

Hello Andrew,
Thank you for the details of the issue you are experiencing with AirPlay through iTunes on your laptop. I found an article with things you can check when you are not able to AirPlay.
I recommend following the steps in the section titled "If the AirPlay icon doesn't appear" in the article below, but this step specifically stands out to me for the situation you described:
Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
You can find the full article here:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do I turn on my Remote Speakers via Airport Express

I have a remote speaker set up thru my Airport Express wireless system - - However, I don't see where I access that speaker through my ITunes program on my IMAC. Would appreciate your help

Try this:
Make sure IOS is updated to latest version
(How to update your iOS device
http://support.apple.com/kb/HT4623)
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766

Music interrupts when using iTunes & remote speakers via Airport Express

Like many other I have had this problem.
Short version:
It disappeared when I turned of a wireless network expander and was only running the network with the wireless router and Airport Express on.
Long version:
I had the folowing setup. One Linksys wireless router, one Linksys access point configured as wireless repeater (to extend the range of my network). About in the middle my Airport Express is located. When I disconnected the Wireless Repeater the problem disappeared. My conclusion is that Airport Express was switching between the two "base stations" and that was when the interruption was created. Anyone else who has about the same setup and do experience the problem that can verify by disconnecting everything except the wireless router?

The trouble you are reporting sounds like WiFi connection probs. Signal quality and strength is just not sufficient to ensure a constant and high enough data transfer. I would recommend to do some test with AP and computer being rather close to each other. Its may a good idea to switch from WEb to WPA encryption.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Trouble printing to Epson Workforce 435 via airport express network

We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express. After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well. Our Macbook air works just fine. The printer's network status sheet says it is connected, but it's like our computer can't find it on the network. Can't ping the printer's IP address either.

Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
Here is additional information about how the AX is currently configured:
In the Airport tab in AirPort Utility:
Wireless Mode: Create a wireless network
Radio Mode: 802.11b (802.11b/g compatible)
Channel: 1
Wireless security: WEP
MAC Address Access Control: Not Enabled
In the Internet tab in Airport Utility:
Connect using: Ethernet
Configure IPv4: Using DHCP
Ethernet WAN port: Automatic
Connection sharing: Off (Bridge mode)
I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
Thanks!

Unable to print to my Oki C3200 via Airport Express

Hi
I wish to print wirelessly via Airport Express using my Oki C3200 printer. I have followed all the recommended install procedures.
I am using a Windows Vista Home Premium 32 bit PC, have configured the printer with Bonjour for Windows, and still cannot print.
The printer works fine if connected by USB direct to the PC.
Any help appreciated.

Yes, my iMac is hooked to my Airport Extreme through it's ethernet port.
No, I don't have AIM.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Can I play tracks from my iPod via Airport Express on only from my laptop?

I can play tracks from my laptop thorugh my Bose Lifestyle Airport Express. Is there a way to play tracks from my iPod Touch through my Bose system via Airport Express? My Airport Express is set up as a client to my Sky Broadband wireless router.

I set up my laptop to my Bose Lifestyle System via Airport Express. It may be different for MAC but I just downloaded the Airport Express software and followed the on-screen set-up procedure, which includes entering your WI-FI key. I do not have an iPad. You need to select Airport Express in iTunes as your sound media. This is easily switched by an icon in the bottom right corner of the screen. You will need to switch this back if you want to revert to using the laptop speakers.

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

Can we print with a non-wifi printer via Airport Express?

Is it possible to print with non-wifi printer via Airport Express?

Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

Can't find certain servers connecting via Airport Express

For the last couple of weeks I've been intermittantly unable to access certain websites (time.com / nytimes.com) when connected to the Net via Airport Express. Sometimes these pages come up, more often then not, they don't. I have no problem receiving email or accessing other sites. Also, I always loose my connection when streaming news stories from NPR. However, I have no such problem when connected directly via ethernet. Thus, it seems to be some glitch with airport express. Does this make sense to anyone?

Gerard Van Schip wrote:
I have 3 printers connected to the network via Ethernet and as long as I'm connected directly to the network I can print but as soon as I connect to one of the 4 Airport Express units I have I can no longer print.
You don't describe what happens when you try to print.
Does the IP address your computer is granted in both configurations match in the first three elements (such as 10.0.1.5 and 10.0.1.7)? If not, then your AirPort Express unit is creating a new "subnet", which can cause problems when your computer tries to communicate with the printer.
Try adding the printer in the "Print & Fax" panel of System Preferences by choosing the "IP" option and entering the IP address of the printer.

Remote control via Airport express

Similar Messages

Maybe you are looking for