Remote debugger gives error about not supporting this version

I have LabWindows/CVI 8.0.1 (356) on a Windows 7 machine and I'm trying to remotely debug a product on a Windows XP machine.  The product is a DLL called by TestStand sequences.  TestStand is version 2.0.1f1.  When trying to connect, I receive the following error message ( see attachment ) after the debugger machine sees TestStand was launched on the debugee machine.  What does this mean?  Thanks.
-G-
Attachments:
Error_Msg.docx ‏30 KB

Hi Grasshopper,
This problem is possibly occurring because your LabWindows/CVI Run-Time Engine is newer than your version of LabWindows/CVI Development System.  Please refer to the following forum thread which mentions a similar problem with remote debugging:  http://forums.ni.com/t5/LabWindows-CVI/Remote-Debug-problem-with-CVI-Runtime-Versions/m-p/2067462 .
To correct this problem, you must make the version of your Run-Time Engine (RTE) the same as or earlier than the version of your Development System.  You can either do this by upgrading LabWindows/CVI to a newer version, or by uninstalling the RTE on your debugger/debugee, and then installing the RTE corresponding to your Development System on both machines.
Please let me know after completing this step whether you encounter any further errors.
Warm Regards,
Daniel D.
National Instruments
Automated Test Software R&D

Similar Messages

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • "Exchange organisation does not support this version of Exchange server"

    I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
    I have already installed exchange Server 2010 in the that domain.
    The following the image that show the error that i am facing
    I have the checked current Active Directory or Exchange Server schema version by using
    Using that i got the following information
    "dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
    objectVersion = Windows Server 2008 RTM
    CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
    rangeUpper = 14726 ( Exchange server 2010 sp1)
    I am attaching the Exchange server setup logs here
    [5/31/2013 3:04:28 PM] [0] **********************************************
    [5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
    [5/31/2013 3:04:28 PM] [0] **********************************************
    [5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
    [5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
    [5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
    [5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
    [5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
    [5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
    [5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
    [5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
    [5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
    [5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
    [5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
    [5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
    [5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
    [5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
    [5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
    [5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
    [5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
    [5/31/2013 3:04:31 PM] [0] The following roles are unpacked: 
    [5/31/2013 3:04:31 PM] [0] The following roles are installed: 
    [5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
    [5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
    [5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
    [5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
    [5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
    [5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
    [5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
    [5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
    [5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
    [5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
    [5/31/2013 3:04:32 PM] [0] Applying default role selection state
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
    [5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
    [5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
    [5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
    [5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [5/31/2013 3:04:53 PM] [0] **************
    [5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
    [5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
    'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'  
    [5/31/2013 3:04:53 PM] [1] Beginning processing.
    [5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
    [5/31/2013 3:05:24 PM] [1] Ending processing.
    [5/31/2013 3:05:24 PM] [0] **************
    [5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
    [5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
    $true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [5/31/2013 3:05:24 PM] [1] Beginning processing.
    [5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
    [5/31/2013 3:05:27 PM] [1] Ending processing.
    [5/31/2013 3:05:40 PM] [0] End of Setup
    [5/31/2013 3:05:40 PM] [0] **********************************************
    Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
    Thanks

    dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine  install exchange 2010
    Exchange organisation does not support this version of Exchange server
    warning
    setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
    please can u tell me the how install exchange 2010
    thanks

  • "The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

    "iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • The iPod software update server could not be contacted. the server does not support this version of itunes its saying

    i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
    Regards,
    Brahma.

    You need to update to the latest version of iTunes. Go to the apple and select software update.
    i

  • Your organization does not support this version of lync

    Hi.
    Have - Lync 2013  server.
    Connect from Lync 2010 mobile clients - all ok.
    Try to connect from Lync 2013 mobile clients  - can't.
    Write - your organization does not support this version of lync.
    Please, help.
    Thanks.

    Hi there,
    Lync Mobile Client 2010 connects to lync server using mobility services, where lync Mobile client 2013 requires the Unified communications Web API to be active in order to connect.
    UCWA and Mobility services are part of the CU1 for Lync server 2013 therefore you should make sure that you have applied at least CU1 and followed the installation instructions properly in order to make sure that Lync 2013 mobile clients are able to connect.
    here are some resources to help you
    This one contains January 2014 updates
    http://support.microsoft.com/kb/2809243
    This is a detailed article for the installation process
    http://www.zerohoursleep.com/2013/07/lync-server-2013-cumulative-updates-cu2-july-2013-installation-workflow/ although it is written for CU2 it can be used for any cumulative updates
    Regards,
    Charbel Hanna
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • I have a IMac 7.1 Intel and trying to download vidoes to an Ipad version 5.1.1 - i keep getting error's stating that the ipad does not support this version - any suggestions?

    I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?

    What is a 7.1 intel?

  • The Exchange organization does not support this version of exchange - EXCHANGE 2010 on 2008 R2

    Hi,
    I am currently trying to install 2010 exchange on 2008 R2 after an unsuccessful run with 2013 install.
    I am getting this error with the readiness checks. 
    I have uninstalled 2013 exchange and removed the folders in /Program Files but it seems that it is still picking up the 2013 install.
    Is there something in AD that i need to delete so it forgets about 2013? 

    Hi nikala,
    Thank you for your question.
    I agree with Hinte. So if we want to install Exchange 2010 on present organization, we could recover the AD to time which is before to prepare AD schema for Exchange 2013.
    I suggest we post error information when we install Exchange 2013 to
    [email protected] for our troubleshooting.
    In addition, there are a link for us to deploy Exchange 2013 on Window server 2008R2:
    https://technet.microsoft.com/en-us/library/aa998636%28v=exchg.150%29.aspx
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • The ipod software update server could not. The server does not support this version of iTunes be contacted

    my iPod is not working.
    It doesn't  turn on. it is not recognised my my Mac, and iTunes says that sentence.
    what can I do?
    Thanks in advance

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    -Griff W.

  • Safari Version 5.0.6 (5533.22.3) yahoo mail will not support this version . Yet I cannot upgrade to a different version ? What can I do ?

    I have a apple ibook and it has safari Version 5.0.6 (5533.22.3) and when I go to yahoo mail it will not load says it is no longer supported. Do I really have to get a different browser  or is their an apple safari browser that I can down load. I also have an new apple book pro and it is fine but this older version is my home use computer.

    If your Mac is an Intel CPU model then you can purchase a OS X 10.6.3 Snow Leopard upgrade disc from Apple for$20 and then update to OS X 10.6.8.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    If your Mac is an older PowerPC style Mac, then OS X 10.5.8 is as high an OS as your Mac will go.
    If your Mac is a much older PowerPC Mac, you could try TenFourFox which is more up to date web browser, based on Mozilla Firefox, for older PowerPC Macs run OS X 10.4 Tiger or OS X 10.5 Leopard.
    http://www.floodgap.com/software/tenfourfox/
    If your Mac can be upgraded to Snow Leopard, then
    Backup your important data and/or your entire Mac OS system before doing a major systems upgrade.

  • I downloaded the newest version and there is a Circle with a slash through it over the firefox icon. When I click on it the message is the system does not support this version. How do I reinstall the previous version?

    I updated firefox. When I did there was a circle with a slash (as in No!) across the firefox icon. I clicked on it to open the browser and the error message reads: the application firefox cannot be launched - 10661
    How do I go to the previous version that worked just fine?

    Firefox 3.6.x is the last available from Mozilla for PPC Macs. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html
    For older Macs that aren't supported in Firefox 4+ versions, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
    http://www.floodgap.com/software/tenfourfox/<br />
    http://tenfourfox.blogspot.com/ <br />
    https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  • HT201210 I have a dead iPod nano 3rd generation and cannot get anything on the screen when I try to charge it or reset it.  When I try to connect to iTunes says 'The iPod update server could not be contacted.  The server does not support this version of i

    I have just updated iTunes to latest version and am connected to internet.  Can anybody shed any light on this one?

    only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

  • Not Support this type of CPU: 0f33

    Hi. After I flashed the BIOS to version 2, I get this error message "Not support this type of CPU: 0f33". I can't get to a floppy drive or CMOS to recover the flash.
    Has anyone else encountered this and if so, how did you get around it to recover?
    Thx
    MikeC

    MB MSI 848P Neo
    1 GB RAM
    Intel 2.8 CPU
    120 MB Hard Drive
    Found this article and tried it. But still cannot get to anything. Have a bootable floppy with the old bios version but cannot get to the floppy to boot it. The MB just hangs on the screen display "Not support this typs of CPU:0F33". Any help would be great.
    Thx
    Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
    Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
    When 4 beeps are heard you may remove the floppy disk and restart the computer.

  • Getting error feature not supported: expr_agg:

    CREATE PROCEDURE "PAYROLLDBTEST".GetWorkingHoursAsFloat
      -- Add the parameters for the function here
      IN WorkingHours nvarchar(10),
    OUT FloatValue float
    --RETURNS float
    LANGUAGE SQLSCRIPT 
    AS
    BEGIN
      -- Declare the return variable here
      --DECLARE FloatValue float;
      -- Add the T-SQL statements to compute the return value here
    FloatValue :=    (SUM(case when (:WorkingHours <> '0')
    then
    IFNULL(SUBSTRING(:WorkingHours,0, IFNULL(LOCATE(':',:WorkingHours), LENGTH(:WorkingHours))),NULL)
      else 0
    end
    ) * 60)
    +
    SUM(CAST(IFNULL(SUBSTRING(:WorkingHours, LOCATE(':',:WorkingHours) + 1, LENGTH(:WorkingHours)),NULL) AS INTEGER))
    IF(:FloatValue /60.0 IS NULL)
    THEN
      FloatValue := 0;
      END IF;
      END;

    I am using HANA database.
    When i executed above code with SELECT it gives syntax error like :
    Could not execute 'CREATE PROCEDURE "PAYROLLDBTEST".GetWorkingHoursAsFloat ( -- Add the parameters for the function ...' in 1 ms 812 µs .
    SAP DBTech JDBC: [257] (at 351): sql syntax error: incorrect syntax near ":=": line 15 col 19 (at pos 351) .
    and when i do not use SELECT it gives error :
    feature not supported:expr_agg.

  • Error : software component version does not support this object type.

    Hi ,
    We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR  .
    How can we solve this error.
    Regards,
    Syed
    Edited by: Umar Syed on Jun 11, 2009 12:01 PM

    Hi Srinivas,
    We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
    Once we login to our ESR from index page we have this option to choose
    Available Profiles :         Process Definition
                                       Service Definition
                                       Unregistered.
    We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
    Regards,
    Syed

Maybe you are looking for

  • Non Cenvatable in Import PO

    Dear SAP Experts, I have an issue. In the Imports PO, usually JCDB - IN:Basic Customs Duty - Non Cenvatable JCV1 - IN: CVD - Cenvatable JECV - IN:ECess on CVD - Cenvatable J1CV - IN:H&SECess on CVD - Cenvatable JEDB - IN:ECess on BCD - Non Cenvatable

  • 3d chart / graph drag numbers to standstill! Why so slow?

    Whenever i change a simple graph / chart from a left hand style to a fancy 3d right hand one - the system grinds to a halt. It takes about 20 seconds to register mouse clicks from one object to another. What gives?

  • Issue with UPK

    Hi, I have installed UPK 12.1 with Oracle database in Server-client architecture. But when I tried to access the, http://hostname/ODSConent, getting below error.   HTTP Error 403.14 - Forbidden  Please help me to solve

  • Display Actual x values

    For some reason, I can not get LabVIEW to display the actual values of the x values in a graph. As shown below, I want LabVIEW to display the x values [1.254 2.346 3.754 4.6757 5.236] How will I be able to let LV show the actual x values, I set the p

  • Bloody sick of Itunes Restrictive Schemes, there must be a better way!

    Don't get me wrong, I love my macs and itunes and ipods and iphones and all the rest but I am sick of being told how to manage media by Apple. I've read this: http://support.apple.com/kb/HT1495 but I want this: 1) a single media library on a home ser