Remote Debugging w/9iAS not working !

I tried posting this in the app server area but apparently, it's too difficult for anyone to answer. No replies.
We need to debug a deployed jsp that uses java beans.
The jsp/java beans app is in jdevleoper 9.0.3.1 (windows 2000).
I have deployed the application to Oracle 9ias java edition (9.0.3) on Red Hat Linux.
I know how to modify the project settings in jdeveloper for remote debugging.
when I start debug mode in jdeveloper I am prompted for the host name and port number for the remote debug session. What port do I use ?
Do I need to do something to start 9ias at a certain port ? If so, how do I do this ?
I have seen conflicting information on this that mainly refers to a standalone oc4j, not the oc4j in 9ias.
Frank

Hi,
We have gotten many requests for collateral that details these steps. We are currently working on such a document. Keep posted to the JDeveloper OTN website http://otn.oracle.com/products/jdev for updates on this.
-Stuart

Similar Messages

IPhone 4+Remote+Component Cable+TV=Not Working

Hello all, I am writing to get some help getting my accessories to work together for my iPhone 4. I use an Apple Component AV Cable to hook my iPhone4 up to the front of my older TV (red/yellow/white) to view my videos on my TV. This works but I wanted to get the apple remote so I could control the volume and play from the couch. When I bought it, the page was different, but it said it was compatible with the iPhone 4, so I got it.
Well, it didn't work. Not with just my previous set up and with nothing I have tried since. When I plugged the cables in and tried to use the remote, it didn't operate the iphone, though the video was playing on the tv as usual. I assume the iPhone doesn't have an infrared receiver? So then, I got my hub's Dock, which has an infrared on the front, and on the back, an s-video female connection, the flat narrow port for the usual apple cables (which my Apple Compnent set plugs into as well), and a Line Out. I tried inserting the Apple Component AV Cable, which has the usual apple connector and the red/yellow/white cables. The remote works with the iphone now, but the video won't play on the TV, even though it says it is. It's like the signal isn't going through the dock to the connector. Do I need a different dock, a different cable? Something else?
All I have open to connect to the TV is the Component red/yellow/white.
Any ideas? Thank you so much!
Gina

Whoops, I always get the type of connection messed up. Sorry. I still have the right connections in any case. I have red/yellow/white on the tv and red/yellow/white apple cable. The set up works just fine. I get color video and audio and it looks great. My problems started when I tried getting the remote to work with it.
Like I said, if I use the dock in the setup, the remote works on the iphone but the tv does not play the video. If I take out the dock, the tv plays the video, but the remote does not work the iphone.
Does anyone have any ideas, please?
Thanks,
Gina

Remote for iPod does not work for MENU

I have just bought a 30GB iPod and the A/V connection Kit which includes a Remote. The menu function of the Remote has no effect on the iPod.
One reply to such question stated, quote ... it does not work ... it is meant for the front row software.
In the documentation provided with the A/V connection Kit, there was nothing re the limitation in functionality of the unit.
Could someone pls explain to me what is meant by "front row software" in relation to the iPod ?
Tks for assistance.
jc
ps I am new to these things !!!

Thank you for promt reply.
In reading the documentation more carefully, it does state without going into details, that the Menu button is for other Apple applications.
Tks again
jc

Remote for Tv anywhere not working

My new remote from the box will not work but everything else works fine. Any Ideas how to make my remote work?

My remote doesn't work either. It hasn't worked period. I returned the previous tuner and got a new one, but it still doesn't work. I have windows xp pro corp. on an IBM T40p. I don't know what to do... cept maybe pull my hair out? The jog dial on the side also doesn't work. Please help? Thanks

Remote Desktop & Screen Sharing not working??

Hello all,
I am trying to connect to a friends computer via the Finder's Screen Sharing, I enabled the screen sharing preferences under the System Preferences, put the password, etc and had him do the same and I am not able to connect to his system. I'm sure there is something else I have to do in order to get this to work. In the Windows world I had to use the VNC. But, I remeber reading in a Snow Leopard book that this is all that had to be done in order for this to work.
Best Regards,
freesparks

I know I could never get this working between two macs of the same OS (10.5.8) over the internet with the appropriate Sharing settings set up....
Im guessing both Screen Sharing and Remote Access through iChat DO NOT work anywhere but in a LAN?

Appletv remote app and airplay not working with iphone 4S

I have the latest appleTV. I have the remote app loaded onto my ipad3 and iphone 4S. The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV. It used to work. I have deleted and reloaded the app, and still nothing. It worked fined until a month ago or so. I have enabled home sharing.
The app and airlplay are working just fine with the ipad3. I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router. I don't think this is the issue, because it worked before.
Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC. Nothing seems happed on the computer when I enter the code. Could this have anything to do with recent appleTV or itunes updates? Any possible solutions?

It seems like I am having the same problem.
I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
(1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
(2) iMac not Airplay to AppleTV
(3) Airplay Mirroring not working
The following are done:
- Home sharing enabled
- To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

My apple tv remote play button is not working so i can not access anything...what can i do?

My remote will not work on Apple TV. The play button does not play so I can not access any content. What can I do?

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Powershell remote connect to DPM not working

Hello all,
Using System Center DPM 2012 R2.
Trying to start with automation in SMA using our DPM servers. Tried to use the sample script
"Sample-Managing-DataProtectionManager", this is a simple script with a connect-DPMServer statement. When executing keep getting the error "Connect-DPMServer Unable to connect .. ID: 948". Verify that the DPM service is running on this computer.
Pretty sure that DPM services are running. Using an account with domain admin rights and full access to the DPM server (local admin) and SQL Server instance (sysadmin) hosting the
DPM db's. And firewalls allow access (tried with firewalls off).
When I try to connect to one of the DPM servers from a remote DPM Management shell all works fine. When I try to simulate the inlinescript (used by SMA) with an invoke-command
from a remote
host I get the same error. Tried starting PowerShell as administrator, but still no luck. Tested if the invoke-command was running as administrator and elevated, this is the case.
I get the feeling that I am missing something :-). Anyone any luck with using dpm from sma or using powershell from a remote host to connect to a DPM server and can help me?
Kind regards,
Erwin

Hi Adrian,
Finally got it working, but not that easy. SMA is using workflow and you can't use New-PSSession in a workflow. You need to use inlinescript then. And then you have to workout how to use your variables.
Below my working example. Thx for your assistance!
workflow Managing-DataProtectionManager
# Connection to access DPM server.
$DpmConnection = Get-AutomationConnection -Name 'DpmConnection'
$DpmServer = $DpmConnection.ComputerName
"Using script host $DpmServer"
# Create a PSCredential from the 'Username' and 'Password' fields within
# 'DpmConnection' because this is the form of authentication that an
# inlinescript accepts.
$SecurePassword = ConvertTo-SecureString -AsPlainText -String $DpmConnection.Password -Force
$DpmCredential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $DpmConnection.Username, $SecurePassword
inlinescript {
$sesOption = New-PSSessionOption -SkipCACheck -SkipCNCheck -SkipRevocationCheck
$ses = New-PSSession -ComputerName $Using:DpmServer -Credential $Using:DpmCredential -Authentication CredSSP -SessionOption $sesOption
Invoke-Command -Session $ses -ScriptBlock {
param($DpmSrv)
# Import DPM module.
Import-Module DataProtectionManager
# Connect to DPM server.
Connect-DPMServer -DPMServerName $DpmSrv
# Obtain a list of disks found on DPM server.
#Get-DPMDisk
Get-DPMBackupNetworkAddress
} -ArgumentList $Using:DpmServer
Remove-PSSession -Session $ses
} -PSComputerName $DpmServer -PSCredential $DpmCredential

FPN SP12: Remote Delta Linking does not work

We have two portals, both running NW70 SP12. The Producer portal is a BI portal, the consumer is a plain EP. SSO has been implemented, and the consumer has been registered on the producer. Remote Role Assignment works, and content from remote roles is visible on the consumer. The producer portal object is called BI_Portal, and the consumer portal object is called EP_Portal.
While RRA is working, Remote Delta Linking is not.
I can browse the producer PCD from the consumer and copy the selected iView to the consumer PCD. I can then take the copied iView and place it in a role. Once I grant the consumer role to a user, the item then shows up in the navigation structure. However, when clicking on the iView, I get the following error in the Producer log file:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Unexpected error - Unable to get IView: fpn:EP_Portal/pcd:portal_content/ca.company.fld_comp/ca.company.fld_projects/ca.company.fld_fed_con/ca.company.rl_loc_fed_con/fld_my_work/fld_loc_fed_con/ca.company.iv_sd_org:Uql7CRb%2FAHAgS69lwbBcoA%3D%3D:1:
Now, this error appears on the producer portal - why is the path fpn:EP_Portal in there? I think what's happening is that the wrong fpn object is being placed in the iView object, so when the request hits the producer portal, the portal runtime can't find the object since the object fpn:EP_Portal doesn't exist.Or, perhaps I don't understand what the fpn: locator is supposed to mean.
If you use the PCD Inspector, the iView attribute FpnLocator is what contains the fpn:EP_Portal/ string. I've tried modifying it to point at the local portal, but that doesn't work either.
Anyone else at this service pack level get RDL working?

I'm a bit confused:
EP_Portal is the name I entered for the consumer portal when I registered with the producer. So, when I go the producer portal, EP_Portal is listed as one of the consumers. Therefore, EP_Portal is the name of the consumer, as seen on the producer.
And, where do I specify the P4 port? There is not property for the consumer PCD entry - the only port number I can specify is the external network port, which is in this case 52000 (for the BI Portal).
The only other port number I can set is in the URL of the Consumer. The web dispatcher is running on the consumer, so the url does not specify a port number.
Are you saying that this URL should point at the P4 port on the consumer?

Script to open Remote Login in "sharing" not working after move to 10.5

Under 10.4 I sued the following script to open Remote Login (tick the box). Under 10.5.6 it does not work.
do shell script "/usr/bin/open /System/Library/PreferencePanes/SharingPref.prefPane"
activate application "System Preferences"
tell application "System Events"
tell process "System Preferences"
click checkbox 1 of row 6 of table 1 of scroll area 1 of tab group 1 of window "Sharing"
delay 3
tell application "System Events"
quit application "System Preferences"
end tell
end tell
end tell
I get the following error:
System Events got an error: Can’t get tab group 1 of window "Sharing" of process "System Preferences". Invalid index.
Anybody know why?

give this a spin
activate application "System Preferences"
tell application "System Events"
tell process "System Preferences"
click button "Sharing" of scroll area 1 of window "System Preferences"
select scroll area 1 of group 1 of window "Sharing"
select static text "File Sharing" of row 3 of table 1 of scroll area 1 of group 1 of window "Sharing"
select checkbox 1 of row 3 of table 1 of scroll area 1 of group 1 of window "Sharing"
click button "Options…" of splitter group 1 of group 1 of window "Sharing"
click checkbox "Share files and folders using FTP" of sheet 1 of window "Sharing"
delay 0.5
select button 2 of sheet 1 of window "Sharing"
keystroke return
delay 0.5
tell application "System Events"
quit application "System Preferences"
end tell
end tell
end tell
-----------------

Coldfusion 8 debug ip restrictions not working

Have been trying to limit ip's to local host, 127.0.0.1, but no luck. Debug info is visible to all. Inherited application that uses coldfusion so not very familiar with it but the debugging options seem very straightforward in the administrator but still the limiting of debug info to specific ip's is not working. Windows 2003 R2 environment. Any insight would be useful. Thanks in advance.

I'm not sure what you're asking, but each Service directive should be on its own line. It is an error to have both a <Client> tag and Service directive on a single line.

[Solved] Remote X over ssh not working

Hello, I'm trying to forward X11 over ssh but it's not working.
I type
ssh -X 192.168.1.101
followed by my password, and I log in just fine.
I try to launch an X11 application and I get
$kate
kate: cannot connect to X server
SSH is supposed to be forwarding a dummy $DISPLAY to allow remote X. So I type
$echo $DISPLAY
and and get back a empty newline.
Well how about
$xinit
Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Okay, I'll shut down xserver.
I do it, and type
$xinit
again. KDE launches on my remote box. It makes sense, but contradicts many guides I have read which say it should launch on my local machine.
What am I doing wrong here? This should be ridiculously simple.
Last edited by xenobrain (2010-07-06 20:45:16)

Did you enable X forwarding in your sshd config?
Did you xhost + (or ssh -Y)?
Did you crop your DISPLAY variable in a bashrc or similar script run at login?
Last edited by benob (2010-07-06 19:10:54)

Remote pairing setting does not work on 10.8.2

As the title suggests, the pairing option in Security & Privacy simply does not work. If I pair my mac, other remotes still work, if I turn the reciever off, other remotes still work.
Is there a kext that I can delete to really disable the reciever?

Hi,
here are some more informations about the problem.
The root CA certificate is imported as trusted in the system keychain of the server and the client. A certificate evaluation returns "valid certificates, trusted ...".
The client bind fails with this messages, e.g. Kerio Control is able the use LDAPS, so it seams just the problem with the trustability of the certificates. Keychain trusts the certificates, OD client bind not, this is not so consistent.
Any idee?
Thanks
Henri
2013-03-14 19:39:02.776804 CET - Trigger - notified opendirectoryd:nodes;lastServerChanged;/LDAPv3/ldaps://macpro....:636
2013-03-14 19:39:02.793467 CET - 71825.330426.330427, Module: AppleODClientLDAP - unable to create connection to LDAP server - ldap_search_ext_s for the ro
otDSE failed with error 'server connection failed' (-1) error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed (self signed cert
ificate in certificate chain)
2013-03-14 19:39:02.793501 CE
CONNECTED(00000003)
depth=1 /C=DE/...
Certificate chain
0 s:/CN=macpro...
i:/C=DE//OU=IT/CN=*.office.../emailAddress=admin@...
verify error:num=19:self signed certificate in certificate chain
verify return:0

Apple remote desktop over vpn - not working

Hi,
I've been using ARD within my firewall and it's been working great. I am currently traveling and logged in via VPN (PPPT) for the first time and although I can see the computers (two) that I want to log into, I am not able to connect to them.
I am able to access my file server fine, it just seems to be ARD that does not work... I have an Asus RT-N66U as my router/VPN server.
HELP!!!!

have you tried scanning the network in ARD while connected via VPN

Remote App on iPad not working with ATV

The remote app on my iPad (1st gen) was working fine with ATV last week. I noticed when using ATV there was a message about updating the ATV to a new version. I skipped the update each time as I just wanted to watch the program. However, we recently had a power outage which caused the ATV to shut down and I'm assuming launched the update as I didn't see the update message last night. However, I'm not able to use my iPad remote app with ATV any longer. When the remote app launches it indicates that it connected and it sees both ATV's. Yet, there is no ability to control the ATV. My iPhone 4S does not have this problem; It still works perfectly. I also have an iPad 2 and 3 and will check that shortly. Does anyone know for sure if the recent updates caused iOS 5.0 users to loose functionality?
Thanks,
Jeff

Hello ElCidPhysics90,
The following article contains a number of steps that should be helpful in getting the Remote app working correctly again.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Cheers,
Allen

Remote Debugging w/9iAS not working !

Similar Messages

Maybe you are looking for