Remote Desktop Access with Mac and Asus Transformer Prime

I have an E2000 router with the most current firmware. I have a Sony VAio laptop with Windows 7 Home Premium 64bit,a Macbook with 10.6.8, and a new Asus Transformer Prime with ICS.My work desktop is a Dell Optiplex 380 with Windows 7 Pro 32bit. I frequently work from home and have no issues remoting into to my work PC from by Sony laptop via VPN and RDP.However I have never been able to connect successfully to my work PC with my Macbook(using Remote Desktop Connection 2.1 for Mac OS) or Asus tablet(using WYSE Pocket Cloud RDP app for Android). I can however connect to the VPN itself on the Macbook and tablet without issue same as my Windows laptop. The other interesting part is I can connect via RDP when I am connected to a Mi-Fi 3g hotspot. So it is definitely something in the my Linksys E2000 blocking the connection for some reason. I have even set Port forwarding of 3389 with the ip's of both the Macbook and Asus tablet.I have also tried connecting via ethernet to the router with the same outcome. I cannot ping my work pc from either device as well.In addition the firewall on my work PC is completely disabled and all services related to Remote desktop access are enabled and running.Does anyone have any ideas?

For my tablet its own ip assigned by the router. Same with the macbook.the Pocketcloud RDP app also uses 3389.I have port 3389 set for both internal and external port and protocol "both" under the Single Port Forwarding tab in the router config.

Similar Messages

  • Remote desktop access with VNC and KDE

    Hi,
    I want to access from my win machine the arch linux one with remote desktop the KDE graphic interface.
    I've installed xrdp and I can connect in the session :1 but not on the session :0 (the one one that allow you to control the real desktop)
    I do not think with xrdp I connet to the session :0, do you know how can I do it?
    thanks

    thanks for your answer,
    my need is very easy, I have my linux box in the living room and it is connected to the TV through HDMI.
    I want to control it from my laptop, (that is on my knees) what I see on the tv without need to go till there (i'm lazy and the sofa is very confortable), mainly I want to play/stop movies and browse internet for add torrents to ktorrent.
    And I would like to remove the keyboard and the mouse from the linux box (but this is not a must)
    if there is a better way to do that, please tell me
    thanks

  • Remote Desktop Client for Mac and SSO

    Hi. 
    We have RDS Deployment (Windows Server 2012 R2) with RD Connection Brokers, RD Session Hosts and Web Access.
    Windows clients log on without any issues, credentials must be entered only once (Single Sign On).
    But Mac clients must enter their credentials twice (on CB and SH).
    Does Remote Desktop Client for Mac support SSO and if it does, what special settings are required?
    Mac users use Microsoft Remote Desktop 8.0.13.

    Sorry, I have missed important detail. This problem appears when I open .rdp files.
    Really, if I create connection and save my credentials, I will not enter credentials. But in this case I can't specify Collection
    (loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.SomeCollection - parameter in .rpd file).
    In my case, I open .rdp file, connect to RD Connection Broker, log in to RD CB, RD CB redirects me to RD
    Session Host, I log in to RD SH (enter credential second time) and now I connect. In this chain could be a RD Gateway.
    When I connect to the same farm with the same .rdp file from Windows client, I have enter credential only once (SSO works).
    So my question: Does  Remote
    Desktop Client for Mac support SSO? I know that SSO require CredSSP, is it implemented in Client for Mac?

  • Enabling remote desktop access to a simple windows 2012 datacenter edition server

    Hi,
    I am a complete noob to server administration. I installed a windows 2012 server initially as a workgroup. All i need is to enable a user to remotely access my server(using remote desktop). The firewall that I use is Gibraltar.
    I read that to enable remote desktop services my server has to be part of a domain. So i promoted my server to a domain name controller. Using active directoty I added a user to the domain. I also read that to make remote desktop more secure, I have to request
    the user to login through a VPN. 
    Now here is where I am completely lost. Do i really need to move my server to a domain, if the user just wants access to this server and nothing else? Should i restrict remote desktop access only through VPN
    and if so, how can i do that? Further, the server dashboard gives me notifications about 'remote desktop licensing' not configured. We got the software as a campus licensing and I am not sure how to configure the remote license server. Any opinions are highly
    appreciated.

    If you're just trying to setup this to allow administration access then I don't believe you need it to be a member of a domain. There's a difference between allowing remote desktop access for administration, and setting up full terminal services access for
    multiple users. The latter requires a lot more work and licensing unlike the former.
    To simply allow admin access, open an explorer window and right click on Computer, then select properties. In the System window that appears, click Remote settings on the left. Now in the bottom half of the window select "Allow remote connections to this
    computer" and leave the option requiring NLA in place. Click Select Users..., you'll see that the administrator user already has permissions to connect, so if you're only planning to connect with that then you're finished, otherwise find those users you
    want to grant access.

  • Prohibit full remote desktop access and allow remoteapp

    Hi all,
    How to allow remoteapp only while prohibiting full remote desktop access except for some users?
    Thanks

    I am Microsoft Tech with Platforms Core  , I came across this thread rather recently. So as a Christmas surprise it can be achieved rather simply.Please follow following steps...
    1. Please navigate to HKLM\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-TCP
    2. Change the value of port to anything from 3389.
    3. Also change it in remote app manager in RD Session Host server RDP Port to the port you have changed to in registry.
    4.Please note it has to be done on all session hosts,redirectors  and Connection brokers.
    5. Now your remote app continues to work , however RDP done sans the exact port number will not work.
    Please feel free to contact me on this.
    Simple sweet and logical resolution. Cheers..Happy holidays :-)

  • Problem connect to my office PC with Microsoft Remote Desktop from my MAC OSX 10.9.1

    When I try to connect, I get the following message "Java (TM) is required to display some items on this page"  and then a prompt to install Java, which I did already, and verified that it is running on my machine.  I have downloaded Chrome
    vs Safari for use since Safari is not compatible with Java version.  HELP!!
    CDr

    Hi,
    As far as I know, Java is not required for the Microsoft Remote Desktop client for Mac.
    Please make sure that you download and install this App for the link below.
    https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417
    Getting Started with Remote Desktop Client on Mac
    http://technet.microsoft.com/library/dn473012
    In addition, if issue persists, please provide us screenshots for further research.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Downgrade Microsoft Remote Desktop Client for Mac

    Is there a way to downgrade to a previous version of the microsoft remote desktop client for mac? We are experiencing issues with one of our published remote apps (regarding window focus i.e. which window of the open application is at the front of the
    users screen) since upgrading to 8.0.9. This application was OK in 8.0.5. Can we revert to an older version?

    We are also experiencing similar issues regarding window sizes and display settings with our remote resources, since upgrading. We are using remote desktop application for iPhone/iPad. Upon opening of our Remote App, although we have set the command-line
    argument to open to full screen, we see the application resizing 3 times before it finally opens - and it does not open in full screen. Please assist.

  • HT201068 I updated Remote Desktop Admin 3.8 and now my Time Capsule wireless connection is having.

    I recently updated to Remote Desktop Admin 3.8 and since then, I have had issues with the wireless connection from my Time Capsule.
    1) I reset modem and had no change. 2) I then plugged the ethernet directly into my Mac and the connection was great so it's not the service or modem.
    3) I hard reset the TC and when it came back, the speed was good but went back down after a few minutes. 4) Plugged ethernet directly into Mac and again, the speed was great so it is definitely the TC.
    Would love some help resolving this. Hoping I don't have to get a new wireless router. Maybe the TC is too old? I purchased it in 2009 or 2010/ Current version 7.6.4

    Hey evebutterflies,
    I see that you are having some connection issues with your Time Capsule. Are these issues only present when using Remote Desktop Admin 3.8? If so, you may need to review the information in the following article and see if this sheds some light on the issue:
    Apple Remote Desktop: Troubleshooting Connection to Client Behind NAT Router
    http://support.apple.com/kb/TA20780
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • HT201068 Updated Remote Desktop Admin 3.8 and now my Time Capsule wireless connection is slow

    I recently updated to Remote Desktop Admin 3.8 and since then, I have had issues with the wireless connection from my Time Capsule.
    1) I reset modem and had no change. 2) I then plugged the ethernet directly into my Mac and the connection was great so it's not the service or modem.
    3) I hard reset the TC and when it came back, the speed was good but went back down after a few minutes. 4) Plugged ethernet directly into Mac and again, the speed was great so it is definitely the TC.
    Would love some help resolving this. Hoping I don't have to get a new wireless router. Maybe the TC is too old? I purchased it in 2009 or 2010/ Current version 7.6.4

    Most home routers running 24/7 are good for about 3years.. your TC has now managed to survive 6 years.. it is well and truly time for a replacement. Simple fact is, it should be dead by now.. so you are living on borrowed time whatever happens.
    Why RDA would slow the wireless I am not sure..
    Are you running Yosemite.. ?? I tend to point the finger at the OS rather than an application.. mind you if the amount of data going back and forth has increased.. what appears to be slower wireless might actually be something else.
    Apple has reasonable wireless analyser built into the OS since mountain lion.. it is well worth using.
    http://osxdaily.com/2012/07/31/wi-fi-scanner-mac-os-x-mountain-lion/
    I recommend doing a few things like short names, no spaces pure alphanumeric for everything in networks. Passwords also must comply. Apple made changes to network protocols since Mavericks but did not fix the names being recommended in the airport utility.. and still haven't which break their own rules.
    And fix names for bands differently so you can force the connection.. plus setting channels.
    However in a unit of that age.. it will have pretty weak 5ghz and that is what is important for high speed wireless.. Apple have hindered 2.4ghz since forever.

  • Palm Desktop replacement for Mac and iPhone?

    Since Palm Desktop is no longer in active development, is there a Palm Desktop replacement for Mac and iPhone?
    http://kb.palm.com/wps/portal/kb/common/article/33219_en.html#mac
    I mean, a single application (not a bunch of them like Address Book, iCal etc) that works on Mac (desktop) and that can sync with the iPhone. Including all data from the current Palm Desktop:
    1. Address List
    2. To Do List
    3. Memo List
    4. Date Book
    Thanks.

    If only Apple did something like that (all-in-one-application personal organizer with contacts, memos, calendar, to do lists, etc)
    Well, they offer all those functions--Mail has Notes and To-dos show up in both Mail and iCal, plus Address Book. Clearly someone made the fundamental decision that separate integrated programs were better than an all-in-one, so I wouldn't expect an all-in-one from Apple in any foreseeable future. But you can send a feature request, if you like:
    http://apple.com/feedback
    What would be interesting---and may exist, I haven't looked---would be if a third-party used the open access to iCal/Address Book info to build an all-in-one that integrated with Apple's separate apps, which could provide seamless iPhone/OS X integration while still letting people have the unified interface. Postbox uses Address Book but I didn't see any calendar/notes features in my quick check. Lots of apps build better replacements for Apple's individual programs--BusyCal, I think a Mail replacement, etc---but nothing unified that I've heard of.
    However, my point was that you may be better off grabbing Entourage 2008 while it is still available than waiting for Outlook 2011, which is going to be a different program. Sometimes features go backwards, and Missing Sync compatibility may change or be delayed with Outlook 2011. I don't see the advantage of hanging onto PD until the very last minute.
    ETA re the tech guarantee:
    http://www.microsoft.com/mac/products/Office2008/office-2011-upgrade.mspx
    Message was edited by: Daiya

  • Remote Desktop Connection for Mac - connection lost after a minute idle

    Hi There,
    I am trying to connect from a Macbook Pro to my work (XP) machine using the latest Remote Desktop Connection for Mac.
    It used to work fine, and recently it has been dropping the connection if I've not been 'active' for a minute or so.
    What is confusing is that it is not always like this. Some days, I can leave it inactive for hours over lunch etc, and I'll come back and it will be fine. And just the other day, in the morning it dropped me out ever minute or so I was inactive, and then the afternoon was fine, and the evening was troublsome again.
    Our administrators had not changed anything during that time, nor had I changed anything on my XP machine at work, or my Mac at home.
    I connect via a wireless connection.
    These problems occur when running on battery and when plugged in.
    Any thoughts?
    Thanks,
    ThreeIsles

    Since RDC is not an Apple product, you should post your question on Microsoft's own forums for their Mac version of RDC:
    http://www.officeformac.com/ProductForums/RemoteDesktopConnectionClient/

  • Using/Syncing Lightroom 2 with Mac and PC

    I'm using Lightroom on a couple of machines. My main desktop is a Mac and a Mac laptop while on shoots. I have a partner in the office that works on a PC to work with clients, is there a way to sync the Lightroom catalog between machines, like between the Mac and the PC if they're on the same network?

    I too am having difficulties with this. I used to have a PC desktop & laptop, and used sync products such as Microsoft Live Mesh and/or Foldershare to sync the catalog between my two machines.
    I have recently replaced my laptop with a MacBook, and now have problems with synced catalogs. On my MacBook, it shows that it cannot find the picture files imported on my PC, and my PC cannot find picture files imported on my MacBook. Its ultimately due to the pathname associated with the picture (i.e. a MacBook does not have a C:\... in the path).
    Is there any solution to this to allow the PC & Mac catalogs to sync between machines seamlessly?

  • Having trouble maintaining remote desktop connection with Mavericks.  What is this about needing RDC 3.7.1 with Mavericks.  I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed.

    Having trouble maintaining remote desktop connection with Mavericks.  What is this about needing RDC 3.7.1 with Mavericks.  I downloaded RDC 3.7.1 but it does not replace RDC 2.1.0 previously installed

    Lucky you, it did not work for many users (which as it should be) so MS produced a new version, for ML and Mavericks.
    It's in the App Store, for free.
    FYI, I assume that you were attempting to post a picture, no one can see it (except maybe you) because it is on your computer rather than the forum server.
    file:///Users/dbrant/Desktop/About%20Apple%20Remote%20Desktop%203.7.1.webloc
    Use the small camera icon in the editor toolbar to post it.
    It also looks like you attempted to use Apple Remote Desktop, which does not do Windows.

  • Cant Sync Mac Desktop Software with Mac Outlook 2011

    Hi,
    I cant Sync Mac Desktop Software with Mac Outlook 2011, Calendar and Contacts etc.
    The sync button is not highlighted on the BB Mac Desktop Software therefore it can't be clicked.
    I have turned on sync in Outlook in Preferences under Sync Services.
    In the BB Deskstop Software, when i click on the Calendar function, it says "There are no writable Calendars available for syncing on this computer. The Contacts section says "sync services is currently turned off on this Mac"
    I have updated both the Deskstop software and Mac Outlook to the latest updates.
    Regards.

    Hi and Welcome to the Community!
    First off, you must have installed one of the compatible Desktop Organizer apps:
    KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
    Attempting to use anything NOT on that list will, of course, fail.
    Secondly, you must have not have Outlook installed as "Click To Run":
    KB24040 Support for Microsoft Office 2010 Click-to-Run installation
    If you have it installed in that manner, you must correct that.
    I have no idea how your prior machine was configured, but I know 100% that you can synchronize to a Win7X64 Laptop with Outlook 2010...I do it all the time.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Remote desktop is it secure and encrypted for windows 7 and windows 2008 servers

    Remote desktop is it secure and encrypted? any supporting documenting showing if it is secure and encrypted .

    Hi,
    Yes, RDP is secure and encrypted. RDP uses RSA Security's RC4 cipher, a stream cipher designed to efficiently encrypt small amounts of data. RC4 is designed for secure communications over
    networks. Administrators can choose to encrypt data by using a 56- or 128-bit key.
    For more details, you can refer to the following:
    Standard RDP Security
    http://msdn.microsoft.com/en-us/library/cc240771.aspx
    Enhanced RDP Security
    http://msdn.microsoft.com/en-us/library/cc240795.aspx
    Secure RDS (Remote Desktop Services) Connections with SSL
    http://technet.microsoft.com/en-us/magazine/ff458357.aspx
    Configure Security Settings for Remote Desktop Services Connections
    http://technet.microsoft.com/en-us/library/cc753488.aspx
    Thanks.
    Jeremy Wu
    TechNet Community Support

Maybe you are looking for