Remote desktop no longer connects after installing Photoshop CS3

Hi,
Last week I downloaded and installed the Photoshop CS 3 extended trial on a PC that I regularly connect to via remote desktop. After Photoshop had finished installing, I could no longer connect to that machine (Its running Windows XP SP3) through remote desktop.
Searching on this issue has quickly brought up the fact that CS3 installs Apple's Bonjour service and that has been known to cause connectivity problems for other users. I removed Bonjour by following the guide here (http://www.x64bit.net/site/board/index.php?s=888c3f3673c453dcc972decd6e67e8e0&showtopic= 4214&st=0&p=40719&#entry40719) and reset the Winsock catalog (netsh winsock reset).
Unfortunately I still am unable to connect to that machine with remote desktop. These two machines are connected through a gigabit switch (nothing tricky at all) and it had been working flawlessly until I installed Photoshop CS3. Now when i enter the computer name in the remote desktop connection box and click "Connect", it shows activity (the colored bar moves) and then the connect button returns to its default state and nothing happens. No error messages or anything.
I have searched Apple's forums and found users on various message boards report this same issue, but none seem to have a resolution (aside from re-installing the OS, which doesn't resolve anything if you end up re-installing CS3). Is anyone familiar with this issue and found a solution? If so, I would love to hear it!
Thanks!

I have the same exact issue right now. We purchased CS3 Master Collection and some - not all - of the machines are now refusing a RDP session. I looked in to the Bonjour service problem but it doesnt seem to be the issue. Other machines with the same service work fine.
Anyone have an idea?
Has Adobe addressed this at all. I am aware that more than just the two of us have experienced this issue.

Similar Messages

  • Remote Desktop no longer works after update

    I have a computer lab at my school. I have updated Remote Desktop 3.1 to my G-5 and all of my computers in my lab. Now I have lost all contact with my computers in my lab. Not one computer is recognized by my G-5. These are brand new Imacs with the new processors. I have scanned and refreshed the screen, and have had no success. Any help?

    I am having exactly the same experience!
    I have a G5 DP2.5, 2GB RAM...
    I was able to view my console and the ARDAgent crashed.
    I even went as far as archiving and reinstalling my OS...
    removing ~/ApplicationSupport/RemoteDesktop
    and the two plists in ~/Library/Preferences...
    Here is what my console states upon launching of ARD 3.1 admin:
    Nov 27 12:12:49 Omars-Bucephalus /Applications/Remote Desktop.app/Contents/MacOS/Remote Desktop: AgentListener thread error 0 Unknown error: 0
    Nov 27 12:12:49 Omars-Bucephalus crashdump[1130]: ARDAgent crashed
    Nov 27 12:12:49 Omars-Bucephalus crashdump[1130]: crash report written to: /Library/Logs/CrashReporter/ARDAgent.crash.log
    I get this behavior even when I created a new admin user on this machine.
    Is there anyway to decipher the crash log?
    Please help...

  • InDesign no longer working after installing Photoshop CC

    I just installed Photoshop CC and now my older version of InDesign isn't working. Would a reinstall help or do I need to purchase InDesign CC? I don't need the upgrade and don't want to make the purchase but I do want to use the program. Thanks.

    Take a look at Adobe Forums: InDesign CS5.5 Not Responding and see if you can figure out how to generate the crash and the report from the hang you are experiencing.

  • HELP - Installing Photoshop CS3 Extended using Apple Remote Desktop

    Hello,
    I have 12 MacPro's in a classroom. Is there a way to Install Photoshop CS3 Extended using Apple Remote Desktop (not on a server) to all the computers at once?
    Thank you very much.

    I don't have access to stand-alone PS CS3, only the Design Premium CS3 disc, but that includes Photoshop, so they're probably the same system. In any case, it does not use a standard Apple packaging scheme, instead using a custom mess of hollow folders, app packages, disk images, shared resources, and xml config files.
    I briefly went ahead with the idea of doing an install, looking for what had been installed, and bundling up that virgin copy using Package Maker; but installing it elsewhere — with Installer, nevermind ARD — failed or left me with a 'crashy' copy of the apps. Maybe I just stink at making packages of other people's software, but my guess is that Adobe's installer throws files into nooks and crannies all over, or does a importantly-different install depending on your hardware/software config. In any case, I gave up and made an updated hard drive image including the new software. Deploying that worked fine.
    Sorry I didn't have better news. Good luck. Joel

  • New Bitmap missing from context menu after installing photoshop

    After installing photoshop CS6 from CD onto Windows 7x64; my context menu > New > bitmap is no longer available.  registry settings are intact and I've used Bridge ro reassociate .bmp with mspaint but the option still does not appear.  The installation of photoshop is the only change to the computer in several months.
    I can workaround by creating new txt files and changing the extension but this adds a step to a (non photoshop related) workflow that's been in place and worked well for years.

    I don't know why Photoshop would kill the system default entry for new bitmap - possibly because it has associated itself with that file type.
    First thing to look at - start Adobe Bridge CS6, go into the Edit - Preferences - File Type Associations dialog, and see if you can re-associate MSPAINT.EXE with the BMP format.  That may correct the issue, but I can't say for certain as I don't want to try it here and change my own setup.
    I don't use the New context menu functionality for making new bitmaps myself, but when I looked to see what shows up in my New context menu, I found this:
    Choosing the IrfanView BMP File entry led to this:
    If you can't recover the old functionality via the Bridge settings, it may be that you can install the freeware viewer IrfanView and have it associate itself with the BMP file type.
    -Noel

  • TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    Doubtful - why did the Remote app lose connection?

  • Apps no longer work after installing ipad2 update 4.3.5

    Apps no longer work after installing IPad 2 update 4.3.5

    i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

  • My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

    My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

    Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

  • Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

    Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • Is there a way to remove installed updates from the App Store update window? I keep getting an alert that I have an update for Apple Remote Desktop. It says its installed, but the alert and the app keep showing up. Annoying!!

    Is there a way to remove installed updates from the App Store update window? I keep getting an alert that I have an update for Apple Remote Desktop. It says its installed, but the alert and the app keep showing up. Annoying!!

    Spotlight: How to re-index folders or volumes
              http://support.apple.com/kb/ht2409
    Mac App Store: Cannot update App Store purchases or updates do not seem available
              http://support.apple.com/kb/TS4236
    If re-indexing the spotlight doesn't fix it,we can try a few other tricks.

  • Remote Desktop Services Default Connection issue

    when i am login to Remote Desktop Services Default Connection issue i was unable to see icons which were displaying in internet explorer. It is showing blank. please give me solution as soon as possible.
    i have the screen shots of both IE and mozilla
    thank you

    You can attach screen shots here if you post a reply to your original question. The attach form appears below the textbox where you type your reply.
    Could you describe the steps to reproduce the problem. First you make a remote desktop connection, then you run Firefox on the remote host, and the problem is in Firefox on the remote host? If Firefox on the remote host accessing a site on your LAN, or on the web, or using a protocol other than http (such as file or ftp)?

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • I have not been able to launch Elements 12 after installing Photoshop cc on my computer. I would like to be able to use both. How do I accomplish that?

    I have not been able to launch Elements 12 after installing Photoshop cc on my computer. I would like to be able to use both. How do I accomplish that?

    What operating system and what happens when you try?

Maybe you are looking for

  • Service bus queue connection issue

    Hi I am having trouble connecting to a pair of ACS Queues from an aspx page, the code and queues work fine from a console application but when referencing the assembly and running the relevant parts via my aspx page I get the following exception: Sys

  • Is it possible to change the time format of a CalendarActivity item

    Does any know a way of changing the calendar to use the 24 hour time instead of AM / PM? I would ideally want it displayed this way as all entries are in 24 hour time. I can find examples and have had success extending the DateCustomizer class but it

  • FDMEE - ignore dimension in import format

    Hi, Is it possible to ignore or exlude a defined dimension in the "Target Application" in the import format definition?  I am trying to create an import format (File, Delimited) that ignores Cost Center and Product because the target plan type does n

  • Problems about financial reporting studio and planning

    Hi,all: Here are two problems: 1. after i have installed the fr client in my pc,when i connect to the server,it promot an error infomation as follow: ; nested exception is:      java.lang.NullPointerException and i can't open the fr interface and vie

  • Can I "show" an image for a specific amount of time after a click?

    Hello, I would like an image to appear for only a specific amount of time after the user clicks a button. Is this possible? Thanks for any help!