Remote Desktop no longer works after update

I have a computer lab at my school. I have updated Remote Desktop 3.1 to my G-5 and all of my computers in my lab. Now I have lost all contact with my computers in my lab. Not one computer is recognized by my G-5. These are brand new Imacs with the new processors. I have scanned and refreshed the screen, and have had no success. Any help?

I am having exactly the same experience!
I have a G5 DP2.5, 2GB RAM...
I was able to view my console and the ARDAgent crashed.
I even went as far as archiving and reinstalling my OS...
removing ~/ApplicationSupport/RemoteDesktop
and the two plists in ~/Library/Preferences...
Here is what my console states upon launching of ARD 3.1 admin:
Nov 27 12:12:49 Omars-Bucephalus /Applications/Remote Desktop.app/Contents/MacOS/Remote Desktop: AgentListener thread error 0 Unknown error: 0
Nov 27 12:12:49 Omars-Bucephalus crashdump[1130]: ARDAgent crashed
Nov 27 12:12:49 Omars-Bucephalus crashdump[1130]: crash report written to: /Library/Logs/CrashReporter/ARDAgent.crash.log
I get this behavior even when I created a new admin user on this machine.
Is there anyway to decipher the crash log?
Please help...

Similar Messages

Sync via wifi to desktop no longer works after update

Hi all
I was running ios 7.0.2 and syncing to itunes on my desktop via was fine. Now I've updated to 7.0.4 (I skipped 7.0.3) I'm now unable to sync via wifi???????!
I have hear that iCloud Keychain could be the problem but I haven't set up an account and I don't want to!!!!! But if I did would that reactivate wifi syncing?????
Ever since I updated to ios7 it's been one problem after another

Oh and I'm running itunes 11.1.4 and yea I have uninstalled it and reinstall too

Creative Cloud Desktop no longer works after update

Ever since the last Creative Cloud Desktop update I can no longer use it - tyo check for updates etc I have to go to individual programs. All I get when I open CC Desktop is a blank rectangle. One can't avoid CC Desktop updates as the only option other than to install them is to quit the program. Any ideas? When are Adobe going to iron out this buggy software - or do they really just not care any more?

BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Remote Desktop sound stops working after a while.

Has anyone a solution to this problem of the sound just dropping out of a RDP connection after a day or two?
Win Server2008 (32 bit) running as a Terminal Server.
WIN 7 Clients (32 bit)
Sound is absolutely critical on the program being ran on the WIN7 clients when connecting via RDP to the Server 24/7.
But the sound just stops working on the RDP clients after a day or two.
If I minimize the RDP session and try the sound from the native windows session it works, but sound is not working within the RDP session.
and it takes a restart of the RDP session to restore sound, but then aftera day or two I get a call to say the sound is no longer working- a restart of the RDP sessions restores the sound.
I have checked the Environment sound settings in the RDP setup on the clients and have them set to play on the client, and I have checked that sound is not disabled in the Terminal Server end of things for RDP sessions.
I would really appreciate to help with this if anyone has suggestions.

OK after updating the Server and clients I am still having this issue :(
and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
It took the RDP sessions to be restarted to restore the sound within the session.
I have found similar (old) thread regarding this problem:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
but no one has informed about if as solution was ever found.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

BlackBerry Classic front camera no longer works after update

The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

Hi,
the Classic was shipped already with 10.3
What 10.3 version do you mean exactly?
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Firefox no longer working after update to 19.0.2

Firefox no longer works after auto update to 19.0.2

Hello vinaysingh, check if your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) preventing Firefox from connecting to the Internet.
see for more info : [https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating#os=win7&browser=fx19 Fix problems connecting to websites after updating Firefox]
thank you

Airport Express b/g no longer working after update to Airport Utility 5.3.1

after updating to this the other day, my AE b/g no longer works - like many others on the forum, i get the flashing amber / yellow blinkie light situation. i can hard reset it and get it to initially show up in AU 5.3.1, but once i try to join it to my wireless network (i use it with my laser printer) it never takes, disappears from AU, and sits there flashing relentlessly.
seems pretty clear that it's related to the 5.3.1 update - it was working fine for nearly 2 years without any issues prior to this. i find it hard to believe it had a total failure related to this - in fact, i just finally updated yesterday after being asked to for 2 weeks, and that's when it stopped working, no question about it.
any ideas on getting it to work? i've tried everything on these forums to no avail. or am i stuck waiting on AU 5.3.2?

I just solved the same issue. First I reset my whole network from scratch by hard resetting all devices (1 AEBS N and two AXg). Then I started configuring my main base station and added the other devices to the network one by one. (I have a WDS). Only after setting all the devices to channel 6, did the green light stay on.
Apparently when you configure a AX to participate in an existing WDS network and you enter the existing network name in the configuration panel of Airport Utility, it creates a separate network with the same name. In order to force it to join the existing network, make sure their Airport ID numbers are entered under the WDS tab in Airport as WDS remotes.
Check this thread for the details: http://discussions.apple.com/thread.jspa?threadID=1440997

Remote desktop no longer connects after installing Photoshop CS3

Hi,
Last week I downloaded and installed the Photoshop CS 3 extended trial on a PC that I regularly connect to via remote desktop. After Photoshop had finished installing, I could no longer connect to that machine (Its running Windows XP SP3) through remote desktop.
Searching on this issue has quickly brought up the fact that CS3 installs Apple's Bonjour service and that has been known to cause connectivity problems for other users. I removed Bonjour by following the guide here (http://www.x64bit.net/site/board/index.php?s=888c3f3673c453dcc972decd6e67e8e0&showtopic= 4214&st=0&p=40719&#entry40719) and reset the Winsock catalog (netsh winsock reset).
Unfortunately I still am unable to connect to that machine with remote desktop. These two machines are connected through a gigabit switch (nothing tricky at all) and it had been working flawlessly until I installed Photoshop CS3. Now when i enter the computer name in the remote desktop connection box and click "Connect", it shows activity (the colored bar moves) and then the connect button returns to its default state and nothing happens. No error messages or anything.
I have searched Apple's forums and found users on various message boards report this same issue, but none seem to have a resolution (aside from re-installing the OS, which doesn't resolve anything if you end up re-installing CS3). Is anyone familiar with this issue and found a solution? If so, I would love to hear it!
Thanks!

I have the same exact issue right now. We purchased CS3 Master Collection and some - not all - of the machines are now refusing a RDP session. I looked in to the Bonjour service problem but it doesnt seem to be the issue. Other machines with the same service work fine.
Anyone have an idea?
Has Adobe addressed this at all. I am aware that more than just the two of us have experienced this issue.

Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,

same issue iphone 4

Remote Desktop Connection stop working after upgrade from 10.5.8 to 10.6.1

I too could not connect to a W2K3 server with RDC 2.0.1 after upgrading from Mac OS X, 10.5.8 to 10.6/10.6.1. I have another Mac which is on 10.5.8 and connect fine with the same version of RDC 2.0.1 as well as other PC with Terminal Service Clients.
There is no change on the server side. I have uninstalled and reinstalled RDC 2.0.1 several time and it did not resolve the issue. To rule out firewall/network, I tested with another remote desktop application called CoRD (for Mac) on the same laptop running SL 10.6.1 and it connected to the same W2K3 server fine.
One thing that is worth mentioning (in my case), when it does not connect, RDC totally quit (not running anymore. Not minimize, no cannot connect error message, no little dot on the Dock for RDC, nothing) right after I put in the credential in. When looking at the log entries that are related to RDC in the Console application, I see the following
machine 10.6.1. with RDC 2.0.1 (non-working)
9/22/09 1:17:16 PM [0x0-0x3a03a].com.microsoft.rdc[468] objc[468]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . One of the two will be used. Which one is undefined.
On the 10.5.8 machine with RDC 2.0.1 (working), I see the following entries
9/22/09 1:13:23 PM [0x0-0x24f24f].com.microsoft.rdc[5502] objc[5502]: Class NLAssertionHandler is implemented in both /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/Netlib.framework/Versions/12/Netlib and /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL . Using implementation from /Applications/Remote Desktop Connection.app/Contents/MacOS/../Frameworks/RDCPAL.framework/Versions/12/RDCPAL .
9/22/09 1:13:39 PM Remote Desktop Connection[5502] * _NSAutoreleaseNoPool(): Object 0x16a25c20 of class NSCFArray autoreleased with no pool in place - just leaking
Stack: (0x9277af4f 0x92687432 0x93062bf5 0x926ce0fb 0x9723dff5 0x9268d52c 0x92fd447a 0x92fd4753 0x92fd4a48 0x930375da 0x530bac 0x4831a2 0x483750 0x483c0b 0x47a811 0x4796ac 0x485dad 0x47d475 0x5099dc 0x574c70 0x4ade03 0x4ae65d 0x4ae6f7 0x4ac8dd 0x53260c 0x534187 0x4ae76a 0x4ae7d0 0x4ae88e 0x493925 0x4ae13d 0x533b1a 0x53da6c 0x94a48057 0x934b3155 0x934b3012)
Any help would be appreciated

Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

Airport no longer works after update.

I occasionally use my imac as a base station to connect a laptop to the internet via airport. Since installing the recent security updates my laptop can no longer see a network (I also connect via a pda and this no longer works either).
Airport indicates full signal strength but clearly there is no network.
Tried deleting prefs but still wont work.

Hi there BDAqua...
I used this Pacifist software and followed instructions on this thread, rebooted, nothing seemed to change. Repaired permissions, nothing changed... I thought, oh well! Maybe I'll go to my local (Warsaw Poland) Apple repair centre.
Sadly, I put my computer to sleep, about an hour later, opened it up with ethernet cable attached for internet, and noticed the wireless icon was now dark... lo and behold, clicked on it and my network was checked (this after having had my password "rejected" a million times before) and ... I carefully slipped the ethernet cable out of the socket... and I was still connected.
So my wireless is working again, since doing all that stuff (back to prior firmware version) but for the life of me I don't know why, since it didn't seem to be fixed immediately after all that tinkering and rebooting! Any thoughts?? Did I actually do something that fixed it (must be, since I finally fooled around with it after almost 3 weeks of no wireless) or was this just random??
This is far too un-Apple-ish, by the way! I was used to this with PCs, but first time I've ever had to get so technical with my Mac!

Gmail Push no longer works after update to iOS 4.2.1

I have tested this several times. What previously worked as push yesterday no longer works as push from my Gmail account today after updating to 4.2.1. Is anyone else having this issue? In order to get mail to show up on my phone, I have to go into Mail on my phone. Then the little connecting thing starts up and all the mail since the last time I checked appears.

This may be related -- I just updated my iPhone to 4.2.1 from 4.1. I immediately found that my Google Apps accounts, which had been configured as vanilla IMAP in Mail.app and successfully synced with iPhones as such for the past couple of years, have now started to sync with my iPhone as gmail accounts (not plain IMAP) and have therefore completely lost the custom From addresses, as it seems the iPhone does not allow custom From addresses in gmail accounts. (The accounts list in iPhone mail now has little red gmail icons instead of the generic blue account icons.) It also seems that push no longer occurs, whereas it certainly used to.
Deleting all of the mail accounts from the iPhone, power-cycling the iPhone and then freshly syncing mail accounts from iTunes results in the same outcome. It is as though the iPhone is looking at the IMAP/SMTP settings and inferring that since they end with .gmail.com that the accounts are of type gmail, regardless of the fact that I have said that they are plain old IMAP. (It is tempting to create a noddy domain with CNAMEs pointing at {imap,smtp}.gmail.com just to fool the iPhone however it would probably then complain about invalid SSL certificates.)
I deleted one of the accounts and recreated it manually on the iPhone. This lets me create a plain IMAP account even with {imap,smtp}.gmail.com server names, however when editing the address field, the keyboard which appears is bizarre -- no comma key! (Yes, I searched the various modifier keys, etc.) So, I copied a comma into the clipboard, pasted it into the middle of two From addresses and was at least mildly relieved to find that the mail program did then let me choose between the addresses. However, given half a dozen Google Apps accounts and a plethora of custom From addresses, there is no way that I am going to create this stuff manually. Maybe I will give that CNAME trick a go after all...
My iPad on 4.2 is fine, however I have a hunch that I have not since resynced mail accounts to it since updating. I'll certainly not be daring to do that now.

Control key no longer works after update.

After updating Lion the control key no longer works. It beeps when pressing control and then a number key but nothing happens.
This is left control key though. Right still works?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Bookmarks no longer work after update to ios7.1

After updating iPad to iOS 7.1 today, almost all of my bookmarks in Safari no longer work. What's up?

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Remote Desktop no longer works after update

Similar Messages

Maybe you are looking for