Remote Desktop not showing the graphical interface of an Ubuntu14.04 allocated in Azure

Dear users, dear Ubuntu experts
I have allocate in Azure a Ubuntu 14.04 from the gallery and try to connect frooma Windows Machine using the Remote desktop connection. 
I can connect trough putty to the machine, so it is up and running
I have follow this tutorial, to connect trought Remote Desktop : 
https://community.hpcloud.com/article/using-windows-rdp-access-your-ubuntu-instance
and after complete it, I can connect to Ubuntu, the interface to logon apear, so I enter the credentials, but as soon as the Ubuntu desktop should be shown, all I get is a short-of-grey-old-out-of-signal-tv image
may I have miss some step ??

Hi, 
from the original post I mention, I exectued :
sudo apt-get update
sudo apt-get install ubuntu-desktop
sudo apt-get install xrdp
in the article you mention, same steps are required, and yes, indeed i did them
as describe in the article, I got the " slightly unusual-looking login screen "
but not at all the next ubuntu desktop screen
NOTE: first time I runned //sudo apt-get update// I got a error like uncomplete package, then I do the update, and run again //sudo apt-get install ubuntu-desktop //, it last the installation for
about half hour and finish sucesfully
That was my "log"   
 sudo apt-get update
 sudo apt-get install ubuntu-desktop 
 sudo apt-get install xrdp
 Azure >> add Remote Desktop EndPoint
 sudo /etc/init.d/xrdp start
 sudo adduser MyUserName --force-badname

Similar Messages

  • I use gmail and some emails I get do not show the graphic or picture only a small graphic icon.

    I use gmail for my email. Some of the emails I receive do not show the graphic or photo. I can see the graphic/photo in Internet Explorer and when I hit reply in Firefox. This started happening about 5 months ago. I used to be able to see the emails with no problem... I have checked all options and do have display images turned on. This happens with every email from a yahoo group and some other emails as well. I have the latest version of Firefox. I tried uninstallng and reinstalling firefox... no change.
    == This happened ==
    Every time Firefox opened
    == about 5 momths ago

    Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
    A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar and click the "More Information" button.
    This will open the Security tab of the ''Page Info'' window (also accessible via Tools > Page Info).
    Go to the ''Media'' tab of that Page Info window.
    Select the first image and scroll down though the list with the Down arrow.
    If an image is grayed and there is a check-mark in the box ''Block Images from...'' then remove that mark to unblock the images from that domain.
    See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Remote Desktop: Apple Remote Desktop NOT showing in the Sharing Area

    I have installed the latest Apple Remote Desktop to both my Admin and client computer. In Preferences>Sharing Apple Remote Desktop does NOT show up as a choice to be clicked. Is there something that I have missed?

    I have installed the latest Apple Remote Desktop to both my Admin and client computer. In Preferences>Sharing Apple Remote Desktop does NOT show up as a choice to be clicked. Is there something that I have missed?

  • In PI 7.1, condition editor does not show the outbound interface structure

    Hello,
    I am using PI 7.1, I need to use condition whild determing receivers. So I opened the condition editor, then open the expression editor, select XPath instead of Context object. I would expect that the outbound interface structure appears in the box underneath the XPath, so that I can navigate the structure to choose the field I want to use. However nothing appears here. Do you knwo why is that? Or do I need to do anything to bring up the outbound interface structure in the expression editor?
    Thanks
    Jayson

    Hi Jayson,
    I had the same problem
    the use of context objects and the value help for xpath is available for XI3.0 interfaces in PI 7.10 only. The functionality for "new" interfaces has been implemented in 7.11 only.
    you have to use xpath w/o value help.
    I have created a context object in one of our 7.10 test systems, and indeed I was unable to use it in a receiver determination unless the service interface pattern is "Stateles (XI 3.0 compatible)". If you were to change the service interface to that pattern, you have to change the operation name unless it is already identical to the interface name. So that may not be an option for you.
    It was possible to use the context object in a receiver rule but then I could not activate the receiver determination because the software component version was supposedly unknown. I will check with my PI contacts - please let me know if the change to "XI 3.0" interface would be a possible workaround for you.
    Try the steps which I am giving below, although it's a workaround and don't know the exact reason why it is failing.
    1. Open your Outbound Message Interface (which you are using in your Receiver Determination) in IR, edit it and change the Interface pattern (which is there just below the category "Outbound") to "Stateless (XI30 - Compatible)" , save it activate it.
    2. Follow the same step for your Inbound Message Interface. Change the Interface Pattern from "Sateless" to "Stateless (XI30 - Compatible)" .
    3. Go to ID. Remove your Outbound and Inbound Message Interface from their respective Business Service/Comp and add it again.
    4. Create your your receiver determination again using the Outbound and Inbound MI you have changed.
    5. Open condition editor of your receiver determination.You should be able to see your Message Interface and can choose the XPath.
    Thanks,
    Raj
    Edited by: raj reddy on Jan 21, 2009 5:41 PM

  • Firefox 3.6 on OS 10.6.4 will not show full graphical interface on many Websites' order and payment pages, including PayPal and Amazon.

    Even when I enter a site and can see full graphics, going into an order or payment area shows text only and no buttons.
    When I went into a password-entry site yesterday (Capwiz), I saw not graphics anywhere on the site. However, I saw full graphics using Firefox on the PC laptop I often use for work running Windows 7.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • I have my macbook pro 17" 2.5 Q.C. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb.

    i have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody out there have the same problem please how can i know or is there any other way to be sure what's the real capacity of my graphics?take note this is brand new late 2011 model made to customize MD311 with anti glare screen...

    I have the same machine, except it's running the blessed fast Snow Kitty,
    "when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
    What specs are you refering about?
    Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

  • My creative cloud desktop app does not show the programmes installed

    My creative cloud desktop app does not show the programmes installed so I cant update lightroom or any other programme, have unistalled and reinstalled but no change

    Hi Roni-
    If you updated the desktop installer and the screen is blank: try this:
    Rename the opm.db file.
    Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud
    (help finding hidden files on mac:http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.)

  • I have my macbook pro 17" 2.5 Quad. Core. i7,750GB HDD 5400rpm, 4gb ram, amd radeon 1gb dedicated graphics with intel hd graphics 3000,antiglare screen when i turned on my laptop and see the specs is not showing the 1gb graph. only 512mb is there anybody

    pls help...

    I have the same machine, except it's running the blessed fast Snow Kitty,
    "when I turn on my laptop and see the specs is not showing the 1gb graph, only 512mb is there"
    What specs are you refering about?
    Hold the command shift and 4 keys down, draw a box around what your seeing and upload the desktop image in your post response here.

  • Mac OS X Server v10.7 does not show the ethernet link aggregated interface I created in Server Hardware Network Dialogue window. Are link aggregated ethernet connections not supported in Lion Server?

    Mac OS X Server v10.7 does not show the ethernet link aggregated interface i created. Does Lion server support ethernet link aggregated interfaces?

    Thanks for responding Cold--
    Hardware: Mac Pro  3.0 GHZ quad core xeon
    I read the link but it still does not explain why the aggregated dual ethernet interface does not show up in the Network tab of the hardware section Lion Server. I was able to see it on the network and looks to be using a single static IP that I assigned. My concern was that is this supported and will it allow for failover and double performance of the single network interface.
    Any thoughts?
    Thanks again!

  • Using a remote desktop connection with the Macbook pro.

    I use the remote desktop connection on the Macbook pro and am unable to exchange info between the mac and the remote connetion windows. For example, if I am writing an email from the remote connection and want to attach a document, photo etc. that I created on the Mac, it just doesn't work. It seems like the Mac and the desktop connection are completely seperated eventhough they are both on the screen in front of me. the systems I use for work are not Apple compatible and will not work on anything other than windows explorer and in my case the remote desk top connection. Any ideas!

    Welcome to Apple Discussions
    Try running in 'ClamShell' mode (MacBook Pro lid closed and using an external keyboard and mouse) with the Gateway connected and then run System Preferences/Displays, it should show then ...
    My 1920x1080 monitor shows the following:

  • Just upgraded iTunes to version 11.0.2.26...... now have no music or apps..... they are still in the iTunes library on the pc, just not in the iTunes interface.... ideas anyone..?

      Just upgraded iTunes to version 11.0.2.26...... now have no music or apps..... they are still in the iTunes library on the pc, just not in the iTunes interface.... ideas anyone..?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Note with iTunes 11 an "empty" library may show all your purchases with cloud icons that allow them to be streamed or downloaded from Apple's servers.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    If, for some inexplicable reason, the media has been removed from your computer see Recover your iTunes library from your iPod or iOS device.
    tt2

  • Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

    Hello.....
    I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
    This issue is with only three servers in the environment
    "Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
    The date/time is correct on the server when i checked in the console session of the server
    Can see below messages in event logs
    Event ID 1014:
    "Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
    Event ID 1053:
    The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
    a) Name Resolution failure on the current domain controller.
    b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
    Any thoughts ....

    Hi,
    Have you tried to connect these three servers with IP address instead of computer name or DNS name?
    Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
    For more information please refer to following MS articles:
    Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
    http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
    Cannot connect via Remote Desktop
    http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
    Lawrence
    TechNet Community Support

  • In smartforms the quantity field is not showing the perfect value .

    In smartforms the quantity field is not showing the perfect value because the point is shifting left
    insted of showing 8.10 it is showing 80.00.

    Hi,
    Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
    Regards,
    Rohan.

  • Why did the trace NOT show the other switches in between?

    I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

    It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
    HTH,
    John
    *** Please rate all useful posts ***

  • How do I locate harddisk content like I do in explorer. Finder does not show the hardisk

    How do I locate harddisk content (Files/folders) like I do in windows explorer. Finder does not show the hardisk?? Please suggest.
    Thanks

    Open Finder preferences, select General icon in the toolbar, check the boxes for what to display on the Desktop. Click on the Sidebar icon where you can configure what's displayed on the sidebar.

Maybe you are looking for

  • Query

    I have the following query in the report. select b.sup_name,vendor_number,        decode(div,null,'ANY',div) div,        decode(dept,null,'ANY',dept) dept,         decode(per,100,'ANY',(100-per)) per,         decode(per,0,'ANY',1) rate,         decod

  • Organising itunes folders

              I have discovered the iTunes Music folder (inside the iTunes folder in the Music folder) does not reflect the Library or playlists in iTunes: items are either missing from any particular folder; in other folders; or duplicated in other fold

  • Regarding the performance comparision of application/web servers

    i want the details of performance comparision of application/web servers and which is the best, efficient and easy to use.

  • New component in BOM - No ECN

    We need to change a component quantity in the BOM. BOMs are not ECN number maintained. The Material No. stays the same. How can we change the BOM and still track the previous orders which needed that BOM?

  • Can iCloud Upload be Throttled?

    I have a large (170 gig) photo library that I'd like to upload to iCloud via Yosemite Photos.  The problem is that the upload is overwhelming my modem, effectively crashing it (my cable co says it's going into a "no ping state").  When this happens,