Remote desktop not working with dot1x authenticated machines

Hi,
   we are using machine and user authentication , when machine at logoff the machine is authenticated so users can RDP to it 
but after logging in the remote desktop session goes down because after user authentication the machine gets a new ip address .
is there any way to avoid this issue ?

I am back after a hectic week on this issue...I could find out something very interesting... At times of convergence, the new path takes sometime to calculate the MRU... Mean to say when you issue the command ping mpls pseudowire destn .. The new path has an MRU of 0 for some 5 seconds..After 5-6 seconds MRU comes back with 1700..This screws up the applications like mail synchronization etc.
Apart from this I found a lot of OSPF flapping due to aggresive BFD timers also, which creates issues with remote desktop. I am unable to convince myself on the MRU issue why it happens. IOS issues on 6524??

Similar Messages

  • Remote Desktop Not working with EoMPLS

    I am hosting a HVPLS domain on my 7613 Core router where my spokes (6524ME) terminate the port based Pseudowires. All spokes have an MTU size of 1522. The clients are have intermitent problems with Windows Remote Desktop and mail synchronization. This clearly is an indication of an MTU issue. After doing a little bit of research I found, I need to decrease the MTU to make RDP work properly. Is it possible to reduce MTU of an L3 port to less than 1500?. Can i adjust my tcp-mss on the port where my xconnect is originated?
    Thanks in advance guys..

    I am back after a hectic week on this issue...I could find out something very interesting... At times of convergence, the new path takes sometime to calculate the MRU... Mean to say when you issue the command ping mpls pseudowire destn .. The new path has an MRU of 0 for some 5 seconds..After 5-6 seconds MRU comes back with 1700..This screws up the applications like mail synchronization etc.
    Apart from this I found a lot of OSPF flapping due to aggresive BFD timers also, which creates issues with remote desktop. I am unable to convince myself on the MRU issue why it happens. IOS issues on 6524??

  • Remote desktop not working with WAAS

    I've got the WAAS setup and i'm see ok acceleration between sites but I have a complete failure of remote desktop.  I've had to place a deny statement in my access list on the remote sites router for port 3389 to exclude traffic from the WAAS to even be able to get an RDP connection to work.  I've tried to tell the WAAS to just set Remote-Desktop traffic to pass through but still no luck. Any help would be appreciated.

    Because Internet access is allowed directly from the remote sites the ACL below will only redirect traffic destined for private addresses to the 474 located at the remote site.
    ip access-list extended WCCP-REDIRECT
         permit tcp 10.0.0.0 0.255.255.255 172.17.0.0 0.0.255.25
         permit tcp 172.17.0.0 0.0.255.255 10.0.0.0 0.255.255.255
         permit tcp 172.16.0.0 0.15.255.255 172.17.0.0 0.0.255.25
         permit tcp 172.17.0.0 0.0.255.255 17.16.0.0 0.15.255.255
         permit tcp 192.168.0.0 0.0.255.255 172.17.0.0 0.0.255.25
         permit tcp 172.17.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    By adding this I can force RDP to sort of work
         deny tcp any any eq 3389
         deny tcp any eq 3389

  • Windows RDP Remote Desktop not working with WRVS4400N

    I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.
    Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?

    I have the EXACTLY same problem!......
    It´s driving me crazy that I have spend 150 $ for some shit of a device (Sorry but i´m frustrated)
    I have almost tried everything to make RDP work without any succes.
    I have opened port 3389 to the spefic computer with RDP enabled. It worked prefectly with a low-budget router
    undtil a changed it out a (high quality router - WRVS4400N-EU Version 2)
    Could some please tell me what i´m doing wrong or what Cisco is doing wrong.
    I have always belived that Cisco produckts was equal quality

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • Apple remote contra not working with Lion

    I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
    Is there any solution for that?
    Thanks

    It's not working for me either.
    I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
    Please somebody help us!

  • OS X Remote Desktop is not working with Azure Cloud Machines or Azure Pack Machines

    Hi,
    i can't connect to any Machine via Console. I'm Working with Machines in Azure Pack and in Cloud. The connection causes a Authentication Loop.
    Best Regards

    Hi,
    In addition, here are some related Azure forums below for you:
    Azure Virtual Machines Forum
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesforWindows&filter=alllanguages
    Azure Management Portal Forum
    https://social.technet.microsoft.com/forums/azure/en-US/home?forum=windowsazuremanagement&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Win2k8 Remote Control Not Working With SRSS 4.2 + SRWC 2.2

    Hi there.
    I have an install of Windows Server 2008 (32bit) with SRSS 4.2 & SRWC 2.2 setup. I was previously on SRSS 4.1 & SRWC 2.1 and having the same issue I am having now, which to me tells me this problem is unresolved or i'm being a total muppet. (hopefully not the last one)
    Windows Terminal Server environments has this awesome remote control feature where you can login to an RDP session which is already active and take control of the session while the end user is still logged in.With Server 2003 this works perfectly fine- it's brilliant. WIth 2008 it is a nightmare. It works for a split second and then closes off. The end users session also gets locked out (not logged out) and they have to put their windows credentials in to carry on working again.
    Now... I can remote control users who are logging in via Remote Desktop on Windows XP/Vista etc.. but I can't with the Sun Ray Sessions. Does the SRWC 2.2 fully compatible with RDP 6.1 or is there any information anyone can give me to point me in the right direction of resolving this issue, like I said.. Win 2k3- Works like a dream....
    Any help would be greatly appreciated.
    Regards
    - Joe.

    I just realised I hadn't posted the logs from SRSS Server with the issues. I have just tried on another WIN2K8 Server which wasn't configured by myself or my company and the same symptoms occurred. See logs below:
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4095]: [ID 702911 user.notice] /opt/SUNWuttsc/bin/uttsc[104]: 4116 Abort
    Oct 1 10:58:06 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4117]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4123]: [ID 702911 user.error] /opt/SUNWuttsc/bin/uttsc exited with error code 134 - exiting
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcrit: [ID 702911 user.notice] Info: critical application uttsc (pid=3902) exited with non zero status: 134
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 422571 user.info] Info: a critical application has exited.
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 126805 user.info] Terminating Kiosk Primary Session ( pid=3902 )
    Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 308018 user.info] kioskcritd stopped
    Oct 1 10:58:07 ESL-SOLARIS-SPARE utauthd: [ID 794400 user.info] SessionManager0 NOTICE: EMPTY: ACTIVE session
    Oct 1 10:58:15 ESL-SOLARIS-SPARE kiosk:utkioskconfig:refresh[4381]: [ID 702911 user.info] Enabled Kiosk Mode for display ':2'
    Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 118685 user.info] pam_sunray_amgh::[DPY=2] AMGH_SUMMARY: token=pseudo.00144fb78760, username=, AMGH_Done?=NO(Local Session), Details=AMGH is not configured., AMGH_Target=*NONE*
    Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 976841 user.info] pam_kiosk: pam_sm_authenticate: Initiating Kiosk session with user utku2
    Oct 1 10:58:15 ESL-SOLARIS-SPARE kioskcritd[4420]: [ID 190395 user.info] kioskcritd started
    Oct 1 10:58:57 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4612]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
    Anyone able to help me out?

  • Maximum number of monitors used for remote desktop not working correctly

    My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
    At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
    I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
    Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
    Setting - Result:
    1 - 1
    2 - 1 (???)
    3 - 3
    It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
    Max

    Hi Max,
    Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
    7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
    Karen Hu
    TechNet Community Support

  • The app "remote" is not working with itunes - please help!

    I click the add library button and it shows me the code - as soon as it shows me the code I see the icon for the ipad in my itunes window. i type in the code, but it's not working ... it beeps after about 10 seconds and then the same window is displayed saying "please enter the passcode"

    From my understanding, I thought an app with a + sign meant that it is optimized for ipad and/or iphone, and you pay one price, and can download on two devices. remote is NOT optimized for ipad, but it should work. It did work on my laptop, which is why I'm frustrated it won't work on my desktop --- what's even stranger is the fact that my desktop "sees" it ... it's just the code isn't working

  • Remote desktop not working "remotely"

    I have a Windows 7 Ultimate computer I'm trying to access through Remote Desktop.
    I'm able to access that computer from another computer when both are in the same LAN, but I fail to access it through the internet.
    I already tried disabling windows firewall in the target computer to narrow it down, and it still fails. So the problem mustn't be in the firewall. Only I don't know where else to look.
    Since I can access within the same LAN, I assume the Remote Desktop settings are fine.
    This is what I did to attempt to access the pc over the internet:
    - In my router's admin console, I set up port forwarding and port mapping to work with my target computer's local IP address and port 3389 (remote desktop's port):
    - Then I used an IP lookup service to find my external IP address.
    - I tried that IP:port combination on remote desktop, with the user name from the target pc I want to use (I also tried without entering the user name, but it also fails):
    I always get an error message saying that remote desktop is not enabled, or the remote computer is turned off or not available on the network. The first two are false, since I can access the computer on a LAN and it is definitely not turned off.
    The firewall on my router is disabled, so I really don't know where I'm going wrong.
    Can anyone help, please?
    Thanks!!

    Hi Patr1c1a,
    Did you check the radion button "Allow connections from computers running any version of Remote Desktop" on the recieving computer ?
    System properties / Remote
    Kind regards,
    Gianni

  • Printing locally from remote desktop not working

    i have a client who recently upgraded his computers from xp to win7.  he has a multi store quickbooks pos setup where he has to log in to a remote desktop connection onto a server in another store.  he used to just login and run his reports and
    then print them locally.  since the upgrade, he has not been able to do this.  the work around i found was to keep the xp laptop just for printing reports.  well, now he is separating from the other store and going out on his own.  he needs
    to run some reports and save them to the local machine in order to bring the databases to his store.  first, i need to know how to make the win 7 computer print the reports locally, so that he can run them (the xp laptop crashed).  second, i need
    to know how to copy the files onto his local computer (in server 2008 i can drag and drop them, not in 2003). 
    the win 7 is 64 bit, the server 2003 is 32.  i tried installing the print drivers locally onto the server, but it's the wrong architecture.  i also tried installing the 32 bit drivers onto the win 7 machine, same thing.  i found several things
    to try, but really need to get this fixed asap.  when i try to install the printer, it shows up, and adds just fine.  i am really  having a fit here.
    the copying thing is an absolute must also.  i may be able to get by without the print issue fixed, but would like to know what happened just for my own information.  thanx in advance.

    Hi,
    Firstly you can check whether print spooler service is not stopped. Also ensure that printer driver is compatible\supported by Windows 7 and by server. If you are using printer redirection then might happen that it’s not configure properly. The client must
    have enough permission and also check client requirement for printer redirection (RDP 6.1 or above, .Net 3.5or above).
    More information:
    Terminal Server and Printer Redirection
    Five reasons printer redirection causes Windows printing problems in RDS
    For this can you describe little more”second, i need to know how to copy the files onto his local computer (in server 2008 i can drag and drop them, not in 2003).” Do you want to copy from remote session to local computer?
    Hope it helps!
    Thanks,
    Dharmesh

  • Remote desktop not working on mountain lion

    My ARD does not work on Mountain Lion. The software opens but all I get is the menu at the top, and my only working option is to quit. I spoke to Apple support and they suggest (as they usually do) to reinstall the whole operating system, but I can't accept this as a valid answer as everything else works. There must be a way to fix this without having to reinstall a machine that came originally with Mountain Lion!

    I was able to fix my issue by just uninstalling ARD (I used AppZapper) - and just reinstalling it - no "Archive & Install" required - best of luck with your situation!

  • Apple remote desktop not working

    Just upgraded to Mavericks and can not use apple remote desktop.  I bought my copy of ARD from the store.  Anyway of getting this fixed?

    Hi ikarous79,
    If you are having issues with Apple Remote Desktop under Mavericks, you may want to make sure you have updated to ARD 3.7, which was just released recently. You may find the following article helpful:
    Apple Support: About Apple Remote Desktop 3.7
    http://support.apple.com/kb/HT5896
    Regards,
    - Brenden

  • Why is Apple remote desktop not working?

    I have 4 machines in a remote office that I need to connect to using ARD 3.6. I have a VPN connection working and am able to successfully control all but one of the machines. I have checked all of the settings and have confirmed that the Mac that ARD is not working has all of the same sharing preferences as the machines that are working. All of these machines are on the same network. All of the machines are running OS 10.8.x. All machines that I am able to connect to are running 10.8.3 but the one I can't is only at 10.8.2, but that is only because I haven't been able to remote into it yet to perform the OS update. The weird thing is that I can see the unresponsive Mac (can see the IP address, the version of ARD, OS version, etc.) but I simply can't connect to it to control or observe using ARD. I am however able to use TeamViewer from a remote Windows PC.
    Can someone provide some ideas as to what  to check and or how to fix this? TIA.

    Do you have remote login enabled?
    Have you tried using the kickstart command to restart the ARD Client?
    http://support.apple.com/kb/HT2370?viewlocale=en_US&locale=en_US
    If it's not enabled you will need to call a user or someone at the location and have them check the box to enable remote login.
    In the past the ARD client has 'stalled' forcing me to restart the agent. Another option would be to have someone restart the machine for you.
    I have actually had to use ssh to uninstall and re-install the client software due to corruption or ??.
    Let me know what the outcome is. I see this was from May so let me know either way.
    Thanks

Maybe you are looking for

  • File manager window remains focused in DW CS6

    If I open the file manager window to display my hard drive and the server files, then click on a file in the hard drive display to edit it, it opens behind the file manager window and I cannot view it properly without moving the file manager window,

  • Case insensitive searching in Interactive Page

    Hi all, I am currently working on the interactive report, and wondering is it possible to perform case insensitive search for the data in the textbox besides the magnifying class. By the default, the system uses "=" for searching. I tried the searchi

  • Search clips removed from the library

    Hello! Faced with such a problem in iMovie: made ​​a movie, left him in the draft program. Then, after a time, to sync my iPhone with iTunes deleting the album with the songs, which were used in the project iMovie. Now I can not import my project as

  • HT1338 i need info on iBookG4

    i need info on how to upgrade this mac.  what can i do to use ports?

  • I can't see what I'm editing.

    I closed the screen and I don't know how to open it back up! Please help!!!!