Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Failed to Install the "Oracle Web Services Manager Configuration Assistant"

The installation of "Oracle Web Services Manager Configuration Assistant" was failed when I installed the "Oracle SOA Suite 10.1.3.1.0" ,and the failure information about the installation in the log show as follows, I need your help,thanks a lot!
start-olite:
Starting OLite in background ...
Running:D:\product\10.1.3.1\OracleAS_1\integration\esb\sql\other\wfeventc.sql
Exception in thread "main" oracle.tip.esb.install.exception.InstallationDBException: Failed to execute sql file"D:\product\10.1.3.1\OracleAS_1\integration\esb\sql\other\wfeventc.sql"
     at oracle.tip.esb.install.db.RunSQLScript.runScript(Unknown Source)
     at oracle.tip.esb.install.db.RunSQLScript.runScriptListInternal(Unknown Source)
     at oracle.tip.esb.install.db.RunSQLScript.runScriptList(Unknown Source)
     at oracle.tip.esb.install.db.NonOracleDB.runScripts(Unknown Source)
     at oracle.tip.esb.install.db.OLite.install(Unknown Source)
     at oracle.tip.esb.install.db.InstallerMain.main(Unknown Source)
Caused by: java.sql.SQLException: [POL-3023] ????????
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinDriverConnect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.connect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCFactory.createConnection(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
     at oracle.tip.esb.install.db.DriverManagerDataSource.getConnection(Unknown Source)
     ... 6 more
Java Result: 1
Importing Default System ...
${env.PCHOME}
stop-olite:
Stopping background OLite process ...
CA::DEBUG:******:Finished OLite Install ...
Finished Olite configuration ...
BUILD SUCCESSFUL
Total time: 12 seconds
Exit: 0
TASK: oracle.tip.esb.install.tasks.ConfigureOC4J
Configuring OC4J ...
id value is 2
id value is IASPT
process-type value is 1
id value is 3
id value is IASPT
id value is 3
id value is ASG
process-type value is 1
id value is 2
id value is ASG
id value is 1
id value is default_group
process-type value is 1
id value is 3
id value is home
process-type value is 1
process-type value is 2
process-type value is 1
final map size value is 2
id value is -Xrs -server -XX:MaxPermSize=128M -ms512M -mx1024M -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false
Jun 22, 2010 2:39:09 PM oracle.tip.esb.install.tasks.ConfigureOC4J getOpmnRequestPort
INFO: Port value is 6003
D:\product\10.1.3.1\OracleAS_1\jdk\bin\java -Dant.home=D:\product\10.1.3.1\OracleAS_1\ant -classpath D:\product\10.1.3.1\OracleAS_1\ant\lib\ant.jar;D:\product\10.1.3.1\OracleAS_1\ant\lib\ant-launcher.jar;D:\product\10.1.3.1\OracleAS_1\integration\esb\lib\ant-contrib-1.0b1.jar org.apache.tools.ant.Main -Dinstall.type=SoaBasic -Desb.home=D:\product\10.1.3.1\OracleAS_1\integration\esb -Doc4j.home.dir=D:\product\10.1.3.1\OracleAS_1 -Djava.home=D:\product\10.1.3.1\OracleAS_1\jdk -Doracle.home=D:\product\10.1.3.1\OracleAS_1 -Dhost.name=dpxc67-01 -Ddb.vendor=olite -Dimport.export.db_url=jdbc:polite4@localhost:1531:oraesb -Desb.appserver=ias_10.1.3 -Doc4j.design_time_host=dpxc67-01 -Doc4j.design_time_port=8888 -Dprimary.container=home -Dinstall.mode=OracleInstallerias_10.1.3_SoaBasic -Dsso=true -Dinstall.component=install-developer -Dias.name=soademo.dpxc67-01 -Denv.OC4J_STANDALONE_HOME=D:\product\10.1.3.1\OracleAS_1 -Dias_admin.password=*password cannot be displayed* -Denv.JAVA_HOME=D:\product\10.1.3.1\OracleAS_1\jdk -Denv.SERVER_ADMIN_PASSWORD=*password cannot be displayed* -Dopmn.requestport=6003 -Ddb.vendor=olite -Ddb.connect.string=jdbc:polite4@localhost:1531:oraesb -Ddb.username=system -Dias.virtual_host=dpxc67-01 -Denv.DB_USER=system -Denv.DB_URL=jdbc:polite4@localhost:1531:oraesb -Desb.oc4j.container=home -Denv.DB_PASSWORD=*password cannot be displayed* -Ddb.password=*password cannot be displayed* -e -buildfile esbinstall.xml deploy-applications
Buildfile: esbinstall.xml
Trying to override old definition of datatype echoproperties
common_update_server.xml:
Adding shared library apache.junit ...
Adding shared library oracle.db.lite ...
Adding shared library apache.commons 10.1.3 ...
Adding shared library apache.jdom ...
Adding shared library apache.slide ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://dpxc67-01:6003/home -script D:\product\10.1.3.1\OracleAS_1\integration\esb\install\ant-tasks/esb_admin_client_script_sl.txt
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
publishSharedLibrary command was successful
update_server.xml:
Adding shared library oracle.esb ...
deployer.url: deployer:oc4j:opmn://dpxc67-01:6003/home
publishSharedLibrary command was successful
deploy-applications:
Deploying ESB design time ...
Binding ESB design time ...
Deploying ESB run time ...
Binding ESB runtime ...
Deploying orainfra.ear ...
Binding orainfra ...
Running batch script by:
java admin_client.jar deployer:oc4j:opmn://dpxc67-01:6003/home -script D:\product\10.1.3.1\OracleAS_1\integration\esb\install\ant-tasks/esb_deployapps.txt
10/06/22 14:39:20 Notification ==>Application Deployer for esb-dt STARTS.
10/06/22 14:39:20 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear
10/06/22 14:39:20 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear begins...
10/06/22 14:39:20 Notification ==>Unpacking esb-dt.ear
10/06/22 14:39:21 Notification ==>Done unpacking esb-dt.ear
10/06/22 14:39:21 Notification ==>Unpacking esb_console.war
10/06/22 14:39:22 Notification ==>Done unpacking esb_console.war
10/06/22 14:39:22 Notification ==>Unpacking esb-jca-dt.rar
10/06/22 14:39:22 Notification ==>Done unpacking esb-jca-dt.rar
10/06/22 14:39:22 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt.ear ends...
10/06/22 14:39:22 Notification ==>Starting application : esb-dt
10/06/22 14:39:22 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:22 Notification ==>Initializing EJB container
10/06/22 14:39:22 Notification ==>Loading connector(s)
10/06/22 14:39:22 Notification ==>Starting up resource adapters
10/06/22 14:39:23 Notification ==>Warning. Unable to set up connection factory to location esb-dt for a resource adapter in {1}
10/06/22 14:39:23 Notification ==>Initializing EJB sessions
10/06/22 14:39:23 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initialize esb_console begins...
10/06/22 14:39:23 Notification ==>Initialize esb_console ends...
10/06/22 14:39:23 Notification ==>Started application : esb-dt
10/06/22 14:39:23 Notification ==>Application Deployer for esb-dt COMPLETES. Operation time: 2875 msecs
10/06/22 14:39:23 Notification ==>Application Deployer for esb-rt STARTS.
10/06/22 14:39:23 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear
10/06/22 14:39:23 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear begins...
10/06/22 14:39:23 Notification ==>Unpacking esb-rt.ear
10/06/22 14:39:23 Notification ==>Done unpacking esb-rt.ear
10/06/22 14:39:23 Notification ==>Unpacking provider-war.war
10/06/22 14:39:23 Notification ==>Done unpacking provider-war.war
10/06/22 14:39:23 Notification ==>Unpacking esb-jca-rt.rar
10/06/22 14:39:23 Notification ==>Done unpacking esb-jca-rt.rar
10/06/22 14:39:23 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-rt.ear ends...
10/06/22 14:39:23 Notification ==>Starting application : esb-rt
10/06/22 14:39:23 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initializing EJB container
10/06/22 14:39:23 Notification ==>Loading connector(s)
10/06/22 14:39:23 Notification ==>Starting up resource adapters
10/06/22 14:39:23 Notification ==>Warning. Unable to set up connection factory to location esb-rt for a resource adapter in {1}
10/06/22 14:39:23 Notification ==>Initializing EJB sessions
10/06/22 14:39:23 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:23 Notification ==>Initialize provider-war begins...
10/06/22 14:39:23 Notification ==>Initialize provider-war ends...
10/06/22 14:39:23 Notification ==>Started application : esb-rt
10/06/22 14:39:23 Notification ==>Application Deployer for esb-rt COMPLETES. Operation time: 203 msecs
10/06/22 14:39:24 Notification ==>Application Deployer for orainfra STARTS.
10/06/22 14:39:24 Notification ==>Copy the archive to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear
10/06/22 14:39:24 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear begins...
10/06/22 14:39:24 Notification ==>Unpacking orainfra.ear
10/06/22 14:39:24 Notification ==>Done unpacking orainfra.ear
10/06/22 14:39:24 Notification ==>Unpacking orainfra.war
10/06/22 14:39:24 Notification ==>Done unpacking orainfra.war
10/06/22 14:39:24 Notification ==>Initialize D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\orainfra.ear ends...
10/06/22 14:39:24 Notification ==>Starting application : orainfra
10/06/22 14:39:24 Notification ==>Initializing ClassLoader(s)
10/06/22 14:39:24 Notification ==>Initializing EJB container
10/06/22 14:39:24 Notification ==>Loading connector(s)
10/06/22 14:39:24 Notification ==>Starting up resource adapters
10/06/22 14:39:24 Notification ==>Initializing EJB sessions
10/06/22 14:39:24 Notification ==>Committing ClassLoader(s)
10/06/22 14:39:24 Notification ==>Initialize orainfra begins...
10/06/22 14:39:24 Notification ==>Initialize orainfra ends...
10/06/22 14:39:24 Notification ==>Started application : orainfra
10/06/22 14:39:24 Notification ==>Application Deployer for orainfra COMPLETES. Operation time: 219 msecs
dehydrationStore:
Configuring data sources for olite dehydration store ...
${env.PCHOME}
install-developer:
design time host dpxc67-01
design time port 8888
primary container home
the host is dpxc67-01and the port is 8888
Exception in thread "main" oracle.tip.esb.install.exception.InstallationDBException: Connection Refused ""
     at oracle.tip.esb.install.db.NonOracleDB.runConnectionTest(Unknown Source)
     at oracle.tip.esb.install.db.NonOracleDB.load(Unknown Source)
     at oracle.tip.esb.install.ESBInstaller.setupDB(Unknown Source)
     at oracle.tip.esb.install.ESBInstaller.handleDesignTimeSpecificActions(Unknown Source)
     at oracle.tip.esb.install.ESBInstaller.main(Unknown Source)
Caused by: java.sql.SQLException: [POL-3023] ????????
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinSQLError(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.thinDriverConnect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCConnection.connect(Unknown Source)
     at oracle.lite.poljdbc.LiteThinJDBCFactory.createConnection(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.OracleConnection.<init>(Unknown Source)
     at oracle.lite.poljdbc.POLJDBCDriver.connect(Unknown Source)
     at oracle.tip.esb.install.db.DriverManagerDataSource.getConnection(Unknown Source)
     ... 5 more
Java Result: 1
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\ext
set_app_sso_option:
Using sso=true. Redeploying esb-dt with sso
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\applications\esb-dt\META-INF
Copying 1 file to D:\product\10.1.3.1\OracleAS_1\j2ee\home\application-deployments\esb-dt

It could be due to system language setting -
install SOA Suite failed
Regards,
Anuj

Service manager Configuration Management Cube Library MP failed status after upgrade SCSM 20012 R2

Dear,
After the Upgrade to SCSM 2012 R2, the status of Service manager Configuration Management Cube Library MP is set to Failed and the System library MP is stuck on running in the eventvwr i got the following message:
Deployment Execution Infrastructure has retried the maximum number of times and is giving up on this execution step.
MP Element ID: SystemCenterWorkItemsCube
MP name: ServiceManager.ConfigurationManagement.Cubes.Library
MP version: 7.5.3079.0
Operation: Update
Error message: Errors in the metadata manager. The 'XXXXCustomerList_XXXXCustomerListId;' intermediate granularity attribute ID of the 'IncidentDim_XXXXXCustomerList' measure group dimension does not exist.
I already restarted the deployment of the MP
regards
Geert

Hi !
This looks like the "Primary Key Issue", documented in the MPSync-Fails Section at
http://technet.microsoft.com/en-us/library/jj614520.aspx
1.) Stop, Disable and Disable-Schedule for ALL DW-Jobs
2.) Follow instructions in the link
3.) Run DW-Jobs in correct oder like here
http://blogs.technet.com/b/mihai/archive/2013/07/03/resetting-and-running-the-service-manager-data-warehouse-jobs-separately.aspx
R.

Reporting Services through ISA server for All Authenticated Users

Hello colleagues.
I have MS SQL 2012 server with Reporting Services and it work via link:
https://reports2.domain.com/reports
In LAN all work fine, but I want publish this resource via ISA for All Authenticated Users.
When in publish rule I configure (in Condition) "All users" - all work fine, but when I configure "All Authenticated Users" - I have trouble on web form on
https://reports2.domain.com/reports/Pages/Report.aspx?ItemPat... - scripts not work, because it run how "anonymous" (I see on ISA logging) and ISA block scripts.
I can't use "All Users", because it's not secure.
Maybe somebody publish Reporting Services through ISA server for All Authenticated Users?
OR maybe - how on Reporting Services configure Negotiate authenticated for scripts?

Hi Alexander,
All users or applications who request access to report server content or operations must be authenticated using the authentication type configured on the report server before access is allowed. The AuthenticationType named RSWindowsNegotiate is supported
by Reporting Services. To configure Windows Authentication on the Report Server, please see:
http://msdn.microsoft.com/en-us/library/cc281253(v=sql.110).aspx
Besides, we can publish report server via ISA server. Please note that you should use a new web port number with a new listener which shouldn’t be used by other web site for report server. Reference:
http://social.technet.microsoft.com/Forums/forefront/en-US/1cc68996-1ce6-4d88-a30d-2bfd13fba06e/how-to-publish-ssrs-2008-through-isa-2006?forum=Forefrontedgegeneral
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Katherine thanks for answer.
Report Server service started as Domain account.
I have in RSReportServer.config this:
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate />
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Allow</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
In web.config I have this:
<authentication mode="Windows" />
<identity impersonate="true" />
I can go (from Internet through ISA) to
https://reports2.domain.com/reports and LogOn Authentication is work, but scripts not work, because it run how "anonymous" (I see this on ISA logging) and ISA block scripts.
Do you know where in Reporting Services configure run scripts with Negotiate authentication?

Service Manager, Configuration Manager and Orchestrator 2012 Database

Hi,
I have installed Configuration Manger 2012 R2(CM) on a system and i want to install Service Manager 2012 R2(SM), and was wondering if it would be possible to point to the database of CM while installing the SM 2012 R2 or do i need to install
a separate database.
And similarly if i want to install the Orchestrator would it be possible to point to the database of CM while installing the Orchestrator 2012 R2 or do i need to install a separate database.
Thanks

Firstly, each System Center component (SCOM, SCCM, etc.) has their own database(s). I believe that you are asking about using the same SQL server, or possibly the same SQL server instance.
The answer to your question would depend on a few things, like if you are trying to do this in a lab/POC, or in Production. Here is an article about coexistence of System Center components: http://technet.microsoft.com/en-us/library/jj851033.aspx.
Although it applies to System Center 2012 SP1, I would believe the same can be applied to the R2 version.
Hopefully that gets you started in the right direction.
Also, note what it says in this article (http://www.derekseaman.com/2013/06/teched-2013-system-center-config-mgr-2012-sp1.html), in the SQL Guidelines,
specifically "Do NOT combine databases from other system center products. Don’t build a giant SQL cluster for all system center products."

Service Manager 2012R2 - Hotfix for Service Manager 2012 SP1 secondary Management server

Can the hotfix for the issue described here -
http://blogs.technet.com/b/servicemanager/archive/2013/04/22/service-manager-2012-sp1-secondary-management-server-cannot-set-availability-on-a-health-service-that-doesn-t-exist.aspx
, be applied to a 2012R2 Service Manager environment?
My dilemma; In a Service Manager 2012 SP1 environment, I installed a secondary mgmt server, promoted it, then upgraded to R2. This R2 Primary mgmt server has the error described in the TechNet blog.
The reason this was done, the original primary mgmt server (2012 SP1) resided on the same server as the Portal. This original primary is still at 2012 SP1 with the System Center services disabled.
Again, can the hotfix for Service Manager 2012 SP1 secondary mgmt servers be applied to a Primary mgmt server (or environment, however the hotfix is run) server Service Manager 2012 R2?
Thank you,
Brian VanDam
BVAN in SoCol

Hi,
Hmm, you should probably log a case for this, but my first thought here would be to install a new SCSM 2012 R2 server and promote that one to the new Primary server, then remove the old ones.
Regards
//Anders
Anders Asp | Lumagate | www.lumagate.com | Sweden | My blog: www.scsm.se

Does windows azure service management APIs work for windows azure pack setup as well ?

Does Service Management REST APIs(http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx) for Azure work with
Windows Azure Pack as well ?

Hi,
Windows Azure Pack is basically a proof of concept.
So, it will not have all the features that Windows Azure has in the cloud.
Some services such as Cloud services & storage services are not available.
for some available API support:
If you found this post useful, Please "Mark as Answer" and "Vote
as Helpful".
Best Regards, Tuan Khalib

Accessing remote jms provider to send message

My application has web tier and app tier. I configured jms provider in web tier and created a message driven bean which listens to this provider. I want to ship all me exception stack trace to web tier logs. In app tier when any exception occurs I want to send message to topic (jms provider) in web tier so that mdb in web tier consumes this message and logs it to the log files. For this I should access jms provider in app tier. How can I achieve this?

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Folder permissions for sharing between users on the same machine

Hello,
I have several accounts on my MacBook and I want to keep some files private and some files shared with full permissions for everyone.
OS X standard behavior for the default Users/Shared folder is that everyone has read/write access to the folder, but if you create a new file there, then only the creating user has write access to that file.
I want to change that folder's behavior so that newly created files can be modified by everyone on default.
How would I do that?
Thanks.

Thanks, your answer helped me a lot. I found an even simpler method which doesn't require any extra applications.
Open console and navigate to the directory where your share directory is located, e.g. /Users/Share/
create the desired folder: mkdir public
set acl permissions for each user with: chmod +a "username1 allow flag1,flag2, ....." public/
check permissions with: ls -le
Example:
chmod +a "dev allow list, add_file, search, delete, add_subdirectory, delete_child, readattr, writeattr, readextattr, writeextattr, readsecurity, writesecurity, chown, file_inherit, directory_inherit" public/
This will give the user dev full access to that folder. Any file or directory created inside that folder by the user dev will also inherit the permissions of that folder.
Also, the advanced permissions override any other permissions. you can test that my making that folder inaccessible with chmod oga-rwx public/ and dev will still be able to access it because of the acl permissions.
exactly how i wanted it.

Grant read permissions for one new user in db2

Hello,
we wish to have one new user in database which only can read in all tables. For the moment i´ve no idea to create this. The command "grant select ...." is not possible for a single user and all tables.
Regards
Olaf

we can grant select permission for all table through below steps
1. Run this command on command promt
db2 " select ' grant select on table ' , tabname, ' to user username ' from syscat.tables" > filename
2. Run the above file
db2 " db2 -vtf filename"
Thanks & Regards
BALAJI
tcs

IOS 5: I want to manage app permissions for multiple Twitter accounts

I have two Twitter accounts, one personal and one for work. I want to use different apps to manage them to avoid accidental cross posting. However since I upgraded to iOS 5, any account I use in one app seems to then be added to all other apps too.
I have found the settings panel to allow different apps access to your Twitter credentials or not, but this only work for all Twitter accounts or none. I want to be able to use the phone-wide Twitter integration with my personal account, but I want to lock down my work account to only publish using one specific app. I have tried deleting my work account from the settings panel, and signing into my work account with a third party app, but even though Tweetbot has a button to 'Add account to iOS', apparently it automatically shares it anyway without me giving permission to do so.
This has already caused problems with third party apps using my Twitter log in and not asking which account I wanted to publish to (so it chose both) and I am not happy that apps which I have not explicitly given permission to are able to do this with my second account. Permissions should be able to be granted on an account basis. If you know of a way to do this, or a third party Twitter app which doesn't share your details with the rest of iOS, I would be very grateful, thanks.

I have both this and a slightly different question. I have multiple Twitter accounts on both my iOS5 and iOS6 (test) devices. i like to post tweets from various apps like the Wall Street Journal, etc. In my case, the built-in functionality simply seems to pick the first of my Twitter accounts in my list of accounts in the Settings panel, and post to that one. It would seem to make sense that there should be a user-selectable option for which account(s) should process a tweet, and it probably ought to be system-wide. No?

Managing Specific Permissions for Oracle Enterprise Manager

Hi everyone.
Is it possible to provide EM read-only access to a user that prohibits them from viewing the SOAInfrastructure->Administration->System MBean Browser?
Thanks.

I think you have a similar problem as described in
Problem starting EM 10g
emca did not run, on Windows it also creates the corresponding service.

Setting workgroup backup permissions for server admin user

I apologize in advance for what is probably a trivial question. At school I have set up a Tiger server on a PPC desktop. Open directory is implemented and managed remotely on my personal desktop machine using Workgroup manager. The local server admin account is different from the remote workgroup manager account. I have been backing up using rsync from my machine by logging in with ssh and the Workgroup manager account. Now I want to use ChronoSync on the server machine to set up a simple incremental backup routine. The problem is that ChronoSync runs under the server admin account which does not have permissions to access the group accounts. What is the best way for me to give the server admin account "global" permissions so it can backup the files and directories that were set up using Workgroup manager?
iMac Intel Mac OS X (10.4.9)
iMac Intel Mac OS X (10.4.9)

Hi,
User Account Control treats members of the Administrators group as standard users.
With UAC enabled, members of the local Administrators group run with the same access token as standard users. Only when a member of the local Administrators group gives approval can a process use the administrator’s full access token. This process is the
basis of the principle of Admin Approval Mode.
When an administrator logs on to Windows Vista or newer, the Local Security Authority (LSA) creates two access tokens. If LSA is notified that the user is a member of the Administrators group, LSA creates the second logon that has the administrator rights
removed (filtered).
To work around this issue, use the net use command together with a UNC name to access the network location.
Programs may be unable to access some network locations after you turn on User Account Control in Windows Vista or newer operating systems
http://support.microsoft.com/kb/937624
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Generic Object Services - View Attachments disabled for non admin user

Hi,
I am using SAP 4.7 and the attachments created using table TOA01 - archive link are visible to an administrator user through Generic Object Services toolbox while same View Attachments option appears disabled for other non admin users.
Kindly help !

Hi Neha,
I'm sorry I don't have answer to your question but I wonder if you could help me.
I'm looking at OSS note 530792 to configure GOS 'create attachment' option to copy the attachments to the archive server. currently, these are written to the SAP office tables SOC3, SOFFCONT1, etc and I want to use the archivelink and SAPHTTP and copy to the archive storage.
Have you successfully managed to configure your system since you mentioned TOA01?
In the same GOS menu I've activated the 'Business document' option and can copy these to the archive server by correctly configuring OAC2 and OAC3.
I'll really appreciate of you could please share your knowledge.
Thanks.
Soyab

Default acl permissions for root and user?

after running permissions i keep getting acl permissions changed and will repair. Apparently it doesn't. Is their a manual way of resetting to defaults for both root and user.

Turns out they didn't change themselves, but authentication got out of whack. This post fixed it for me, but I just jogged access on ical and blogs. Not sure which or both is needed, but after I toggled them over and back I was up and running again.
<SNIP>
Solution found athttp://michaeljin.wordpress.com/2010/01/05/locked-out-of-mac-os-x-server/
It’s blog update time! Updates have been a little scarce lately, been super busy with getting trophies on PS3
Anyway, recently encountered the following with a Mac mini server running Snow Leopard Server:
Despite being able to ARD / Screenshare the Mac mini, I was unable to get any further than the login window. Authentication credentials are obviously valid. No weird access permissions have been set. However, the weird thing was, I can connect to the server via Server Admin tools (from another Mac) and all other services were running without a hitch.
After much head scratching it turns out to be a sACL (Service Access Control List) issue.
This thread solved the mystery!
http://discussions.apple.com/thread.jspa?threadID=1654864
To save you the trouble, I’ll lay it out here. I cannot take credit for this, but Randall can!
Open Server Admin on a computer (any), and connect with the local admin to the machine.
Select the server and authenticate.
Select Settings, then go to Access. You’ll want to make sure that Login Window and SSH have the local admin account listed if you select the option to “Allow only these users”. For now, I would suggest making sure all services have “Allow all users and groups” selected.
If (as in my case) it was set to Allow All in the first place, simply toggle the settings – back and forth.
Save.
Try logging in again… should be a good one!
</SNIP>

Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Similar Messages

Maybe you are looking for