Remote Desktop Services Error when trying to send a message to a user in the collections
We are implementing RD for thin clients and when I try to send a message to a user I get an error that states,: Unable to send a message to session X on (SERVER NAME.COM). WTS API Failed
Is there a service that needs to be turned on?
Thanks EPK
Hi,
Thank you for posting in Windows Server Forum.
Before sending message please check following considerations.
- You must have Message special access permission to send a message to a user.
- You can send messages only to users whose sessions are in the active or connected state.
- You can send a message to a user session in Remote Desktop Services Manager by using the Send Message action.
Send a Message to a User
http://technet.microsoft.com/en-us/library/cc754124.aspx
Else you can also try below script and check the result.
Send-NetMessage - Net Send / Msg.exe
http://gallery.technet.microsoft.com/scriptcenter/Send-NetMessage-Net-Send-0459d235
Hope it helps!
Thanks.
Dharmesh Solanki
Similar Messages
-
I am receiving email but when trying to send a message, it is stuck in the outbox, never makes it to the sent messages, used to have same problem with Vista on a Dell, have had this Toshiba with Windows 7 since Sept, first time this has happened, need help and thanks, RR
which computer? which mail program?
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind. -
I just got the HP8600. I set up eprint according to the instructions. When I email a document to the printer, I get a Mail Delivery error:
This message was created automatically by the mail system (ecelerity).
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
>>> [email protected] (reading confirmation): 550 5.7.1 Command
>>> rejected
I know the email address is correct. I don't know what to do to get this to work.The Q.com provider seems to have issues sending to our servers for some reason. Other email providers will work fine like you've found with your gmail account. The best workaround at this time is to send from your gmail account if possible.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
I just purchased the latest ipad. When trying to send a message, the addressee indicates an error stating that it has not been registered with imessage and to remove it. How can this be corrected.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
I get an web service error when trying enable web services. I have latest update and rebooted
i get an web service error when trying enable web services. I have latest update and rebooted
hi there philnj,
could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Keep getting sync service error when trying to connect my iphone 5S.
Keep getting sync service error when trying to connect my iphone 5S. It freezes itunes and I can't do anything else. I see that there is an update for my phone and I need to back up, upload new apps, etc before installing. I plug my phone in and get this error every time. I am using a Win 7 SP1
Howdy Susie48825,
It sounds like you are getting an error that mentions the sync services when you connect your phone to your computer and so you cannot sync your device. I would use the troubleshooting from the following article that mentions an error regardign the sync services named:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
Start with these steps:
1. Check that iTunes is up-to-date
Ensure that you have updated to the latest version of iTunes.
2. Reset Sync History
Resetting your Sync History is a simple step which may resolve some syncing issues. If this works, iTunes will prompt to Merge or Replace the information on your device when you next attempt to sync. To reset your Sync History:
Disconnect your device.
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button, and then reconnect your device.
If this resolves the issue, and you know all of your contacts, calendars, bookmarks and notes are on your computer:
Reset the Sync History again using the steps above.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" select Contacts or Calendars.
Click Apply.
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
There are additional steps to use in the article if needed, but these will get you started.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
When trying to send a message an error says phone not registered in imessage.
When trying to send a message from my ipad some numbers say not registered with imessage. How do I register a number?
Hi lkgallagher24,
If you are talking about registering your own phone number with iMessage, you may find the following article helpful:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
- Brenden -
I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.
Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again. -
when trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
-
When trying to send E-mail via AOL i get the message "rejected by the server because it does not allow relaying" I have checked settings as per answers to similar question
From which account does the email not send? When sending from an account, the iPad will first try to use the aoutgoing server for that account. If it can't it will try the other accounts listed.in the setting on the iPad for that account. It soulds like the server for the account is not working and that the alternate server is resjecting the messag since it did not originate ffrom the account associated with that server, That is to prevent sending spam.
-
Sql Server Web Edition Reporting Services errors when trying to connect to Windows Azure SQL
I am using a preconfigured image from the Azure VM Gallery to create a VM.
--> Sql Server 2012 SP1 Web running under Windows Server 2008 R2
After configuring Reporting Services I get the following error when trying to run a report that connects to my Azure SQL db.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'SQLAZURE' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
On the VM using SSMS I can connect to the Azure SQL db. On the VM in Report Builder when I define a connection I get a similar error to the one above when I test that connection. I am using Microsoft Azure SQL as the data source type.
Interestingly in Report Builder, if I proceed past the connection definition, I can see the tables from my Azure SQL db in the dataset definition page.
One more note. If I use a different image from the Gallery (Sql Server 2012 Standard SP1 on Windows Server 2012) my report builder connection works and the reports run fine. I believe that the Azure documentation says that Sql Server Web edition
is an acceptable choice for the SSRS on VM for reporting.
Any thoughts or suggestions?
Thanks -- Tom ReillyHello,
A VM with SQL Server 2008 R2 or 2012 supports all Reporting Services features, including all supported data sources, customization and extensibility, and scheduled report execution and delivery.
Did you run the report in Report Manager,or preview the report in Report Builder? Which version of the Report Builder you installed in the Windows Azure VM? SQL Reporting does not support reports created from Report Builder 1.0 or 2.0. You can create reports
using Report Builder 3.0 and then upload the reports.
What's more, please also check the database source credential of the report.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
We have a user that uses a new mac book air to connect to our terminal servers using the remote desktop services feature in Windows Server 2008 R2. She is using the standard Rdesktop client supplied by Microsoft.
While she is working sometimes the rDesktop session closes without reason. With other people on a different profile this doesnt happen.
Any ideas what I could check and where to check? or is this a common issue?Hi,
I do not have such issue in my experience. Please check the log file for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
Thanks.
Jeremy Wu
TechNet Community Support -
Is it possible to get Remote Desktop Services running when in Sysprep Audit mode in 2012r2?
Hi,
I'm setting up some images for 2012r2 and personally like to be able to access the machines via RDP. I have broken out of the OOBE by pressing
CTRL+SHIFT+F3, however, even though RDP is enabled (System --> Remote Setting) and running (Services --> Remote Desktop Services),
when I run 'netstat -a', I cannot see any process bound to port 3389, as such I cannot connect. Have restarted the services just in case, but no dice.
I most the other OS setups (Windows 7, 208R2) this is fine (assuming you update either the password in audit mode or enable RDP login with a blank password), but the fact that nothing is listening
on 3389 means that no matter what I do, I will not be able to connect.
Is there any reason why this is the case?
Cheers
Chris
ChrisHi Chris,
Thank you for posting in Windows Server Forum.
Can you ping successfully the respective server?
Initially check whether there is any firewall rule set which is blocking your connection. Please try to change the RDP port from following registry key and verify whether you can get access.
To change the port assigned to RDP:
Caution: Incorrectly editing the registry might severely damage your system. Before making changes to the registry, you should back up any valued data.
1. On the Remote Desktop server, open Registry Editor. To open Registry Editor, Start Run, type regedit, and then click OK.
2. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
3. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Remote Desktop server\WinStations
Note: RDP-TCP is the default connection name. To change the port for a specific connection on the Remote Desktop server, select the connection under the WinStations key.
1. In the right-pane, double-click the PortNumber registry entry.
2. Type the port number that you want to assign to RDP in the
Click OK to save the change, and then close Registry Editor.
For more information you can refer following article (Point 2: You may have a Port assignment conflict).
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Network authentication failed error message when trying to send picture messages
I have a family member who is trying to send picture messages from Dubois, WY. Verizon's map shows that Dubois is in the extended enhanced services area. I am guessing that this may be one of those instances where the coverage map is not 100% accurate. Please let me know if you have any other ideas or suggestions as to what the problem might be or how to resolve it.
Customers have the ability to take pictures / videos anywhere. However, messages can only be sent, received, or uploaded, while in the Verizon Wireless National Enhanced Services Rate and Extended Network Coverage Area.
Try dialing *228 send and option 2 to update the PRL on the phone. Updating the PRL or Preferred Roaming List, ensures the phone is getting the best service possible.
You can also check the coverage area at the link below:
http://www.verizonwireless.com/b2c/CoverageLocatorController?market=all -
IPad mini Network connection error when trying to log into Message
I have an iPad mini and when I try to log into message it comes up with an error asking me to check the network connection. The iPad is connected to WiFi and the internet works fine, I have tried everything I have seen to test but am not having any success. Help please...
Hi there L1975,
Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that can help you resolve the issue signing in to iMessage on your iPad mini.
If you get an error when trying to activate iMessage or FaceTime - Apple Support
So long,
-Jason
Maybe you are looking for
-
Problem is when i updated to the newest ios 7. The dang thing doesnt allow me to have more than one window open at any time. This only makes things repetitive, complicated and slow. Moreover, the icons and overall view are probably designed to be in
-
I updated to the newest version of iTunes and now I can not open the program. I get the message "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes". What now? I'm using Windows Vista.
-
Hi ~~ As the topic, My customers using Acrobat Reader XI Can't open My Pdf file, But, same file can be opened properly in Acrobat Reader X, Acrobat Reader XI shows Error Message: Can't Capture Embeded Font Is there any update of Acrobat Reader XI can
-
Some of my keys are not working!
My delete key is all the sudden not working.. so everytime I spell somthing wrong i have to highlight it and change it... is there something at home i can do to fix it?? and also my fan is running about 90% of the time when i have my macbook on... an
-
Using loop statement in screen flow
Hi Friends, I have been working on the Module Pool for the last two weeks. But Iam unable to get the main difference between the " LOOP WITH CONTROL TABCON " and " LOOP AT ITAB WITH CONTROL TABCON CURSOR TABCON-CURRENT_LINE ". P