Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Similar Messages

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

Keyboard not working correctly after updating to 8.1 64bit pro.

Keyboard not working correctly after updating to 8.1 64bit pro.
After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-keyboard-problem-cou...
I think it can be solved with a driver update from hp or the keyboard builder but none is online.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Script does not work anymore after updating to FM 12.0.3

Hi,
With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
Thanks!

Hi again,
For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

Camera does not work correctly after op system update

UUpdated op system and now camera does not function. Reset pad and made no difference

There's more than one type of reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

IPad 3 not working correctly after update

Updated my ipad3 to ios 6 this weekend. Experiencing several issues with the screen freezing in Settings, Reminders & Calendar.
Tried to restart, backup and restore with iTunes, but no changes. The Calendar and Reminders are still not working.
A few notes:
Not able to access the "Mail, Contacts, Calendars" in "Settings". Does not go to the screen. Freezes the "Settings" screen. Forced quit the Settings app.
Not able to make changes in the "iCloud" in Settings. The circle spins endlessly with no results.
Calendar is blank (only showing a blank opened book).
Reminders is blank.
I use iCloud to sync my calendars between a laptop, ipod touch, desktop, and ipad.
Any ideas on how to resolve this issue?

Updated my ipad3 to ios 6 this weekend. Experiencing several issues with the screen freezing in Settings, Reminders & Calendar.
Tried to restart, backup and restore with iTunes, but no changes. The Calendar and Reminders are still not working.
A few notes:
Not able to access the "Mail, Contacts, Calendars" in "Settings". Does not go to the screen. Freezes the "Settings" screen. Forced quit the Settings app.
Not able to make changes in the "iCloud" in Settings. The circle spins endlessly with no results.
Calendar is blank (only showing a blank opened book).
Reminders is blank.
I use iCloud to sync my calendars between a laptop, ipod touch, desktop, and ipad.
Any ideas on how to resolve this issue?

Why Mail does not work properly after updated to Mountain Lion?

I updated to ML two days ago and my Mail is not working. I can read but cannot reply because there is no cursor. Restarted a few times, no change. Anybody has the same problem??
Rudh

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

Rotation does not work correct after last update iOS 8

EVerything on the screen rotates with the Ipad except the icons of all my one hundred apps. After opening any app its content rotates, but after closing the icon of the app still has the wrong position. is this a bug And how I can fix it?

Hybrid Son Of Oxayotl wrote:
I may be a bit late, but I had the same problem. It seems to come from a faulty .desktop somewhere on your machine. Just try to remove parts of ~/.cache/docky/docky.desktop.???.cache (??? depends on your locale), until you find the right one.
My problem was due to /usr/share/applications/brasero-nautilus.desktop including this line :
NoDisplay=true;
instead of the correct :
NoDisplay=true
(I had quite a lot of trouble to find that one !)
You are not late, you are just in time, I tried to remove the semicolon after "true" before deleting one by one all the entries, and it worked right away! Thanks!

Email counter and connection not working correctly after updates

How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine. Does anyone have a fix for this?

I did find the problem with the counter. It had to do with my Gmail account not my other email account. I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though. I have made sure that the passwords is correct that is entered.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

Focus under Win2k does not work correctly

Hi,
we've found out that the focus does not work correctly under Windows 2000 in
Seamless Mode (App is a Windows Application running on Windows Terminal Server
2003), the same application has no problems under Windows XP, Apple Macintosh
and Linux.
Example: The application has a button which pop's up a small calendar window
giving that window focus. In Tarantella under Win2k however you just see the
window popping up shortly and then going in the background. As the window is in
the background and you can't get the window back and you also cannot work
further in that application as the rest is inactive.
Only way is to do a right-click on the application in the taskbar, which brings
the window in the foreground again. What makes this problem even harder to
analyze is, that it sometimes even works correctly (around 3 of 10 times).
We've mostly recognized this with modal windows. The native client does not have
this problem, however as far as I know it does not support seamless mode.
2. The second problem we got is, that if you click with the mouse into the
initializing Window while the application starts up after you have clicked on an
application Link in SGD (I mean the Pre-Login window of Windows which shortly
shows up just before the Login Process begins),
the application is not started seamlessly but is started within that window and
you have no chance but closing an restarting the application to get it in
seamless mode. This is seen on all Client Operating Systems by us and not only
Windows 2000.
The Client runs:
Windows 2000 SP4 all updates installed
Java: 1.5.0-5
Browser: IE6.0 and Firefox 1.0.7
Server: Windows 2003 Terminal Server (all updates installed)
Tarantella: 4.20.909
I hope that someone has at least a workaround.
Regards
Carsten

I have organized some testcases attached are 3 Test Programs which work
nice natively but got these problems under Tarantella under every Windows
Operating System (the error is not Windows 2000 as I previously mentioned but
also occurs on Windows XP).
The interesting thing is that the Test Program made with .NET does not show this
problem.
Could someone please test these and tell if this error is reproducible on your
systems as well ?
Run these Testprograms natively, they show no misbehavior.
Execute this from a SGD Webtop Session in Seamless Mode, see that
the Modal window is not modal but shifts into the background on every 2 -3 click.
Regards
Carsten
[ModalTestPrgs.zip]

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Why can I not import pictures any more? Lightroom says "Your Lightroom 5 64-bit does not work correctly"

Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.

Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Remote does not work correctly after update

Similar Messages

Maybe you are looking for