Remote doesn't program with TV, help using cable box volume

Hello, I have just had Fios installed in my home and my remote is not able to program with my TV. I have a Magnavox TV and it is old, The installer said that my TV is unable to be programmed with my remote which is why I am here. I have tried every opion in the Control manual to no success. The remote I have is a VZ P265v2 RC and the code for my TV brand is 222 (which doesn't work). I can live without the power opion and the others that come with it, but I need the volume to work since I do not have a remote for my televsion. So my question is, is there a way I can have my remote just use the cable box itself as a volume control without it being programed to the TV if you understand what i mean.
I apologize for the horrible sentences grammar and any confustion, I don't exactly know how to exsplain what I want. I know the Cable box has its own volume setting and the TV has its own volume setting, I want to be able to just use the cables to adjust the volume with the remote.
~Edit~
I have found the opion I want to use in the Audio settings called "Set-Top Box Volume", now is there a way I can bing this opion to my remote volume keys so I dont have to go into the settings each time to adjust the volume

It is set to variable in the audio option, and I assume its using Coax or component cables to connect the STB to the TV since the installer did it himself, and I honestly don't know what those are. I have a wire from my wall connected to my box and then the box is connected to the TV.
I also have multiple other boxes in my home that was just installed as well, and were able to be programmed for the TV using the remote, and the volume controls the actual TVs volume, not the STB volume which is in the opions. Thats the volume control in which I want to use//the only one I seem to be able to use via the control but its only accessable threw the opion and its quiet inconvient since differnt channels seem louder and quieter then each other.
So same question stands, is there a way to use the volume buttons on my Controler to use the STB Volume not the actual TV's. It is current set on variable, not fixed and still no go. And once again I have tried the command codes to program the remote and doesnt work, even tried using them all via pressing the <OK> and the FIOS TV buttons then holding the PLAY button for quiet a few minutes and still a no go.

Similar Messages

  • We just got the Bose TV system.  It is great, but the Bose remote doesn't work with our Apple TV unit.  We have to still use the Apple TV remote.  Any suggestions?

    The Bose TV remote doesn't work on the Apple TV.  I have to use the Apple TV remote.  Is it a system problem with the Apple TV?

    My appletv works with its remote
    Ios devices using the remote app
    2 logitech programable remotes harmony ones

  • Can't add program with Install feature using Palm 6.2, Vista SP1 and LifeDrive

    Hi,
    I am trying to add FileZ to my Palm. I click Install from the sidebar of the desktop, then Add and point to the filez.prc file. However I get a message saying the file cannot be copied. The tool the installer is using to do this is the QuckInstall tool. Should I be using another tool? I've heard QuickInstall doesn't work with 6.2.
    Thanks,
    Monk66
    Post relates to: LifeDrive
    This question was solved.
    View Solution.

    You are correct in what you heard, monk66 - Quick Install does not work in version 6.2.
    6.2 uses it's own "Installation Tool" to put files into the Hotsync queue.  You can find it in two places.
    1. Right click on the HotSync Manager icon and choose "Install".
    2. Start Button/All Programs/Palm/Install Tool.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Firefox command line option "-no-remote" doesn't work with profile.

    I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

    Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
    Please find below the command what I am using
    firefox -P "stripped" -no-remote
    firefox
    If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
    I use the -no-remote with firefox default than it works for the first time.
    I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
    firefox -P "stripped"
    firefox -no-remote
    (But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
    Do you have any idea why this is happening?

  • Remote doesn't work with Universal Docking Station

    Hi
    I have an iPod nano 3rd gen. Whilst in the dock the remote doesn't work at all until I select some music manually using the nano controls. Then I get a response. This is the second docking station from Apple.
    Surely it has been designed to work with the remote as soon as it has been docked to enable scrolling through the menus? There are archived discussions from years ago about the same problem and no solutions! It appears that this product is known to be defective by Apple yet they do nothing and when you call them they act as if the problem doesn't exist. They appear to be selling products that don't work and then do nothing about it.

    i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?

  • Universal Dock's remote doesn't work with iPhone Photos

    Has anyone tried Universal Dock's remote with iPhone Photos? I can't get it to work.
    The remote does work with iPhone music and video though.

    i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?

  • Apple TV remote doesn't work with my 4s anymore

    Why does the Apple TV remote app not work with my 4s anymore?

    Hi capoconstruction,
    If you are having issues with the Remote app on your iPhone, you may find the following article helpful:
    Apple Support: Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/ts1741
    Regards,
    - Brenden

  • Iphone remote doesn't work with itunes anymore.

    I've replaced my wireless router in the last week, but I think remote still worked after that. I don't know what is going on.  Firewall is turned off, bonjour is running (I can see the homesharing from another computer)  But iphone remote doesn't find the library. 

    In iTunes > Preferences > Devices - check what remotes are currently paired, then remove any and start the process from scratch.  Also, check you are signed into iTunes with the same account on your phone and mac.

  • HT3325 Keynote Remote doesn't work with hyperlinks?

    Remote sync well with iPad .. Impressive
    However, it doesn't work with any hyperlinks!
    It's simply an image and swiping the pages ... Ignoring all hyperlinks ... It does work with media but u would have to put them in sequence in your slides. If you work with many hyperlinks within a slide, you can't get any to work with the remote!
    Quite disappointed that Apple actually charges for an app so simple with no value added services!
    There are many free apps doing the same simple tasks.
    Thumbs DOWN.
    Do something about it Apple!

    Any remote that actually works?

  • Actiontec M1424WR Router compatible with the new VMS1100 Cable Box

    Hello all,
    Been trying to upgrade to the new Quantum Fios. To begin Verizon never sent me a upgraded router that was compatible with the VMS1100 set top box.
    They shipped me the Actiontec M1424WR Router looks like my old router but with a red front piece. I'm getting 75/75 service as well.
    This is an older router still. In fact its not even in production anymore. My concern is that it's not going to work with the new VMS1100. Hate to go through the process of setting it up and it doesn't work.
    Can anyone help and clarify if this older router will still work with the VMS1100 set top box?
    Thanks!
    Gene
    Solved!
    Go to Solution.

    VMS will work with the Actiontec Rev I or the Fios Quantum Gateway router.

  • My remote won't turn on/off the mini cable box

    Recently installed system, per onscreen directions.  Remote manages TV fine, but the "All power" button only works on TV.  Mini cable box power "button" is unresponsive, causing me to have to unplug it. Fault in user, or in the equipment??

    cb_schumacher1 wrote:
    Recently installed system, per onscreen directions.  Remote manages TV fine, but the "All power" button only works on TV.  Mini cable box power "button" is unresponsive, causing me to have to unplug it. Fault in user, or in the equipment??Depending on the model of the box, this is by design...   none of the X1 boxes will turn off with the remote...   There is a way to start power saver in the control panel when that option is acitvated in the Comcast Labs area..  After initiation, a left arrow will bring up the Control Panel and you can arrow down to Start Power Save.

  • Keynote Remote Doesn't work with iPhone, iPad

    Hi,
    I have the latest versions of Keynote on my iPhone 5S, iPad 4 and MacBook Pro 13" with Retina Display.
    All three devices on the same WiFi network. Using WiFi I was able to remotely control/play the presetatnion between iPhone 5S and MacBook.
    However, it doesn't work between iPhone 5S and iPad 4. Any help ?
    I tried Bluetooth as well. They seem to not discover each other and neither able to remote control.
    Any tips ?
    Thanks.

    After having to upgrade to the latest version of iOS Keynote (because I edited one of my presentations online through iCloud), I received the message that Keynote Remote is to be discontinued. The alternative they offer is to download Keynote onto your iPhone as they have integrated the remote feature into the full program.
    The problem that I found is that space is more of a premium on my iPhone than my iPad and I don't use the full program on the iPhone, as the remote app takes only 3MB and the full app? 444MB.
    I hope Apple receive similar complaints about this as nearly half a Gig for what will amount to a remote for Keynote is preposterous. I have already purchased my 16GB 5S, it's not as if I can put more memory in it now.

  • Apple remote doesn't work with 2011 Mac Mini

    Purchased today, 8/17/2011, from Apple store new Mac Mini with Apple remote.  Sucessfully paired the remote in "Security & Privacy" area, the "Disable remote" box is NOT checked. 
    When I press the menu button nothing happens. If I start a show in iTunes the "play/pause" buttons work but nothing else. Front Row doesn't show up anywhere. Apple rep said remote worked w/new Mini just like it does with all Mac's. 
    Anyone heard why it doesn't? Is this a Lion issue that Apple will remedy. Total deal killer for me, as we prefer to use the remote when watching shows
    Very disappointed today

    There's no FrontRow with Lion it's been discontinued ...
    There's some possible work-arounds here:
    http://www.tuaw.com/2011/07/21/how-to-install-front-row-on-lion/
    http://macformat.techradar.com/blog/get-front-row-lion-29-07-11
    http://reviews.cnet.com/8301-13727_7-20084238-263/how-to-install-front-row-on-os -x-lion/
    I've not tried any of these.

  • WRT54G Problems with internet, help, used to be fine on old router

    Hello,
    I've bought this router yesterday and have 4 major problems with it ( I've had a cheap router before this and all these problems didn't occur when I use that old router again):
    1: I can't access some sites like gamershell or nvidia.com, while they DO load up with a proxy.
    2: I can't download from at least half the sites on the www, for example everything from microsoft.com times out.
    3: This disconnects after like 5 mins after starting a p2p program. Why is this thing not able to keep my connection alive ?
    4: A lot of sites load slower, my internet speed is same, but it somehow now takes ages for some sites to respond after ticking in their adress or clicking on a link.
    I'm Cabled to the router, the router is plugged to an old ADSL isdn speedthouch home modem from Alcatel ( 5 years old the modem is), I'm connected with it with PPTP.
    Its a version 7 WRT54G router.
    ( my isp is planet NL, I'm on a 6mb down 1 mb up connection)
    Help! Why does this disconnect with p2p, the cheap old router used to be fine 24/7 with p2p.
    Please help, thanks in advance.
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 09-02-2007 06:49 AM
    Message Edited by Snovvdog on 09-02-2007 07:04 AM

    Go to the Setup page and look for the setting called MTU....set it to 1300 and save the settings.... close the browser.... turn off your router by unplugging it from the power.... turn it on after 15 secs then try getting online again.........
    Check if you can access the sites afterwards..
    "You tried your best and you failed miserably! "

  • Bose Sounddock remote doesn't work with 6th Gen 160GB iPod Classic

    I have recently purchased a Bose Portable Sounddock and whilst my iPod Classic (160GB 6th Gen) will work in the docking station, the only buttons on the remote that work are the volume buttons - everything else has to be done on the device.  It does charge when in the docking station as well.  I have an iPhone 4 that works perfectly a Nano that works perfectly but the Classic won't.  I have spoken to Bose who tell me that there should be no issues with my Classic.  I have reset it to factory settings and it hasn't helped.  I have tried another Sounddock in a local shop and it has the same issues.
    Can anyone suggest a way to fix this?  Any help appreciated.

    Assuming that the Bose Soundock, is brand new and not refurbished or pre-owned
    My Suggestions
    Check that the remote batteries are good.
    Hard Reset the iPod, (press menu and select buton for about 10 secs or till the Apple logo comes ON)
    Restore the iPod (this is to fix any corrupted firmware)
    If the above doesn't work, bring the iPod to the Bose store and try it on their Soundock (bring your remote and test)

Maybe you are looking for