Remote DP Data replication

I have a stand alone primary site CM12 R2. Needs to deploy a remote DP.
The feature used will be Software Distribution and SUP on this DP.
1.What roles i need to deploy? Do i need to deploy MP and SUP along with DP?. Clients at this DP will be around 100.
2. What about Data replication after Remote DP setup, will Content Lib, SMSPKG etc get replicated to Remote DP ? Size of these folders on Primary site is around 40 GB. How much space i need on Remote DP. The free space on remote DP is around 30GB. Space
is a constraint. Not sure how to approach, please help.
Thanks

I have a stand alone primary site CM12 R2. Needs to deploy a remote DP.
The feature used will be Software Distribution and SUP on this DP.
1.What roles i need to deploy? Do i need to deploy MP and SUP along with DP?.
There is no dependency on DP remote role (and other site system roles). It can stand alone. You don't need to put SUp and Mp for dp role to work correctly.
Remote MP and SUP roles really required when you've very low bandwidth between Primary server and Remote Site. Even though you remote MP on remote site, no one can confirm all the clients in remote site will always contact remote MP.
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Similar Messages

Employee master data replication error

Dear experts,
Please help on the issue, as we are doing the UAT test next week.
When doing the employee master data replication on test tenant, everything works fine, the replication status is green. But when doing the employee replication on production tenant, replication status is red, and system gives error message:
Company of employment missing for remote employee XYZ.
We check the Employee in Replication Request, and go to the Employment tab, the Company ID is missing there on PRD tenant.
But we check the table OTM_HREE_C01 on ERP PRD and Test tenant , everything looks the same, also the Configuration in report OTM_TRIGGER_EMPL_REPL_CE, everything seems to be the same there.
Could you please let us know what went wrong, and what else to check?
Thanks!
Best regards,
Wendy

Here's some things that I would check:
- Make sure idoc includes the company code for the employee <E101OTM_S_EMPL_EMPLOYMENT> <COMPANY_CODE>
- The assigned cost center of the employee must belong to the same company code this employee is assigned to.
- Review the company code set-up to make sure it is complete
- The communication arrangement to make sure it is complete

Need Suiggestion forOracle data replication/integration/transfer strategies

Client OLTP database(Oracle 10g on Solaris) connected to a web based 'Point of Sale' system where some of their insurance related transactions(around 2000 per day) are stored. Most of their insurance related transactions are stored in a remote central system (accessible over the intranet).
Based on the net worth of a transaction, there is a requirement to either transfer the transaction real-time or batch it and send it across to a remote Oracle 10g(on Solaris) staging area(a part of the remote central system) and fire some stored procedures on the remote Oracle staging area to process the records transferred. Some amount of configurable data massaging would also be needed before firing the stored procedures on the remote Oracle 10g(on Solaris) staging area to process the records transferred. The outcome of the whole process also needs to be tracked.
Client is interested in automating this process to the extent possible using the various possible replication/data transfer strategies (dblink, datapump, etl, replication kit, MQ, xml/http etc.- pro's & con's) to do so taking into consideration the standard security and bandwidth related constraints.

Hi,
There are lots of solutions available
You can think and use the possible solutions for your scenarios.
1.) Data Pump Network Exports/Imports
http://www.oracle-base.com/articles/10g/oracle-data-pump-10g.php#NetworkExportsImports
2.) Data replication using DBMS_COMPARISON
http://nadvi.blogspot.in/2011/11/data-replication-using-dbmscomparison.html
http://www.bash-dba.com/2012/02/data-synchronization-replication-using.html
3.) Complete Schema Refresh using Data Pump
http://www.in-oracle.com/Oracle-DBA/DBA-I/schema-refresh-Data-Pump.php
4.) Oracle Golden Gate
5.) Oracle Streaming
Let you know if any query the same :)
Thanks
Hitgon

Only Remote-Desktop and Replication with 0.0 Reduction

Hi guys,
I have a solution with 16 WAAS 4.4.3 and I got good numbers in all default applications except Remote-Desktop and Replication
( All Traffic 53% of Reduction).
I can understand not otimize Remote-Desktop Applications cause the customer is using Metaframe with crypto and already compacted and
using too RDP with crypto/compacted.
But in the Replication I would expect some gain in Active Directory and MS-FRS Replication.
I got 0.0, Actually, the optmized traffic is biggest that the Original Traffic.
I have to modify something in the Microsoft servers to be able to got reduction in Replication Application ??
I'm using all the Default Classifiers in Replication Application
Double-Take                            LZ+TFO+DRE       1100, 1105
EMC-Celerra-Replicator            LZ+TFO+DRE       8888
MS-AD-Replication1                 LZ+TFO+DRE       UUID:e3514235-4b06-11d1-ab04-00c04fc2dcd2
ms-content-repl-srv                   TFO                     507, 560
MS-FRS1                                LZ+TFO+DRE       UUID:f5cc59b4-4264-101a-8c59-08002b2f8426
netapp-snapmirror                    LZ+TFO+DRE       10565-10569
pcsync-http                             LZ+TFO+DRE       8444
pcsync-https                           TFO                      8443
rrac                                        TFO                      5678
Rsync                                     LZ+TFO+DRE       873
Thanks a Lot
My Best Regards,
Andre Lomonaco

As you said, you need to only send the changes over the line.
Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
It might be worth looking at the source for VNC, and other simler products.
The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method.

Failure in the SOAP Runtime: Employee Master Data Replication Using IDoc OTM_EMPL

During employee master data replication from ECC to CfTE, we encountered the following error:
Unexpected element -el=OTM_EMPL ns=urn:sap-com:document:sap:idoc:soap:messages
We are using the 1402 WSDL for Replication of Employee Master Data with Employment Details (humancapitalmanagementmasterd2). The payload was not received in CfTE.
Can anybody please advise how to resolve this issue?
Thank you.

Dear Joselito,
This issue need deeper investigation in customer system.
Kindly report an incident for SAP Support for further help.
Regards,
Rahul Mishra

ONLINE DATA REPLICATION ONE DATABASE TO ANOTHER IN ORACLE 9.2.0.1

I have used Oracle 9.2.0.1 version. I have created two database(ORCL, ORCL2).
in my PC. I have created INV user in both database. Currenly I have worked on INV user which is in ORCL database. Is there any technique in Oracle 9.2.0.1 online data replication from One database to another. i.e. If at any point of time my ORCL database is damaged my INV user has been recovered in ORCL2 database.

What do you mean by 'Online Data replication'? Do you mean the Oracle Advanced Replication or do you mean the Oracle Dataguard?
Oracle Data Guard Concepts and Administration
Release 2 (9.2)
Part Number A96653-02
Oracle9i Advanced Replication
Release 2 (9.2)
Part Number A96567-01
~ Madrid

Data replication and synchronization in Oracle 10g XE.

We are trying to do data replication and synchronization sort of thing for all our servers. We are using Oracle 10g. XE. I guess there are some features in oracle already for replication but I am not very sure about them.
To explain it more clearly - we will have individual database servers in our sub-divisions and then divisions and centers and then main server. We need to synchronize at various levels. So If any body is aware of any techniques, please let me know.

Hi,
Could you tell me what exactly synchronisation your talking about..?
we will have individual database servers in our sub-divisions and then divisions >>and centers and then main serverIf you have mulitple DB servers then you can connect it by DB links. also if you are talking DB synchronisation then you can have Triggers,Materialized views.
we also have two independent severs which are synchronised(atleast schema levels).
Regards!

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Install oracle goldengate at ASM for data replication in RAC system?

Hi Experts,
We have 2 RAC server and each server have a 4 nodes RAC with 10R2 database in linux.
We will install oracle goldengate as data replication between two RAC servers.
Our database install on ASM in SAN box in linux
Based on Goldengate install requirement, 16. Set a shared driver that is accessed by each RAC nodes
and install goldebgate on shared driver.
As I understand, can we install goldengate on ASM that is shared by each node?
Or we MUST set up other shared driver ( NO ASM) for installation of goldengate.
Please advise me?
Thanks
Jim

http://www.oracle.com/technology/products/goldengate/10/whitepapers/ha-goldengate-whitepaper.pdf
This will answer your questions.

Data replication monitoring on MDG flex mode objects with Information Steward

Hi,
I am exploring different options available to setup data replication monitors on SAP MDG custom objects(flex mode). Basically my requirement is to setup rules in SAP Information steward which identifies if there are any missing records or mismatch between the data in MDG system and the replicated systems.
The challenge I am facing is that the tables generated by MDG framework for flex mode are not consistent and they keep changing if we change some key information in the MDG data model. Also the generated tables are not the same in each environment (like development, quality, production). Appreciate if anybody can provide suggestions on handling the MDG generated tables in SAP Information Steward.
Thanks in Advance.
Goutham

Hi Abdullah,
Thanks for your reply. I cannot write any ABAP code in Information Steward. As you mentioned I can always use MDG API to pull the active data from MDG but here I can only give the table names.
The other option as you mentioned, using DRF I can replicate the data in flat files to Information steward, but it is not making sense as I am validating with replicated data and not with actual data available in MDG. Other point is I don't think it is a good idea to replicate all the records periodically.
Thanks and Regards
Goutham

Issue in data replication for one particular table

Hi,
We have implemented streams in out test environment and testing the business functionalities. We have an issue in data replication for only one custom table all other tables data replications are proper no issue. When we do 100 rows update data replication is not happening for that particular table.
Issue to simulate
Update one row -- Replication successful.
100 rows update -- After 3-4 hrs nothing happened.
Please let me know did any of you have come across similar issue.
Thanks,
Anand

Extreme slowness on apply site are usually due to lock, library cache locks or too big segments in streams technical tables left after a failure during heavy insert. these tables are scanned with full table scan and scanning hundreds of time empty millions of empty blocks result in a very big loss of performance, but not in the extend your are describing. In your case it sound more like a form of lock.
We need more info on this table : Lob segments? tablespace in ASSM?
If the table is partitioned and do you have a job that perform drop partitions? most interesting is what are the system waits nd above all the apply server sessions waits. given the time frame, I would more looks after a lock or an library cache lock due to a drop partitions or concurrent updates. When you are performing the update, you may query 'DBA_DDL_LOCKS', 'DBA_KGLLOCK' and 'DBA_LOCK_INTERNAL' to check that you are not taken in a library cache lock.

First Hit Session Data Replication

We are using WLS 5.1 with sp3 in a cluster of three
          servers using in-memory-rep, JSP, and Apache as our proxy.
          Session data replication between a primary and secondary server
          seems to work fine except in the following case:
          1) Make first hit to the cluster. During the JSP processing of
          that hit set some HTTP session data via setAttribute().
          2) Kill-off the primary server (the one that handled the first hit).
          3)Make a second hit to the cluster, it is handled by another
          server (the secondary), the session is recognized as an ongoing
          session however the session data that was set during the first hit is not
          present in the second hit.
          If we make two hits to the first server and set data, then kill-off
          the primary server, the secondary has the data at the third hit. The
          only issue seems to be when the primary is killed after the first hit.
          Anyone have any ideas?
          Thanks,
          -darren


You can configure ClusterServlet in your web server farm (WLAS as web
          servers) to proxy JSP and servlet requests to the WLAS farm (WLAS processing
          your JSP and servlet).
          Set up in-memory replication in your WLAS farm. Session in JSP will be
          replicated.
          Cheers - Wei
          Yen Liu <[email protected]> wrote in message
          news:[email protected]...
          > Hello,
          >
          > I read breifly the section on BEA's online documentation talking about
          in-memory
          > replication and clustering.
          >
          > In it, it mentioned the ClusterServlet and configuring the
          weblogic.properties
          > file to assign servlets to the ClusterServlet so that sessions will be
          handled
          > correctly and all.
          >
          > My question is, "what about JSP" I am using a lot of JSP pages which sets
          > session parameters for the specific user into session objects.
          >
          > Any tips, recommendations will be most helpful.
          >
          > Thanks,
          >
          > Yen Liu
          > 510/870-1169
          >
          > Prasad Peddada wrote:
          >
          > > Darren,
          > >
          > > It shouldn't be the case. After your first hit, when you kill the
          primary
          > > server, when you make your next request you should find all the info in
          the
          > > session. I will post again, if we find the same problem on monday in our
          test
          > > environment.
          > >
          > > Thanks
          > >
          > > Prasad
          > >
          > > Darren Kessler wrote:
          > >
          > > > We are using WLS 5.1 with sp3 in a cluster of three
          > > > servers using in-memory-rep, JSP, and Apache as our proxy.
          > > > Session data replication between a primary and secondary server
          > > > seems to work fine except in the following case:
          > > >
          > > > 1) Make first hit to the cluster. During the JSP processing of
          > > > that hit set some HTTP session data via setAttribute().
          > > > 2) Kill-off the primary server (the one that handled the first hit).
          > > > 3)Make a second hit to the cluster, it is handled by another
          > > > server (the secondary), the session is recognized as an ongoing
          > > > session however the session data that was set during the first hit is
          not
          > > > present in the second hit.
          > > >
          > > > If we make two hits to the first server and set data, then kill-off
          > > > the primary server, the secondary has the data at the third hit. The
          > > > only issue seems to be when the primary is killed after the first hit.
          > > >
          > > > Anyone have any ideas?
          > > >
          > > > Thanks,
          > > >
          > > > -darren
          >

Loading remote sharedObject data from FMS 3.5 in AS3

Porting from AS2 to AS3 and have a problem in the terminology, methods and syntax for loading remote sharedObject data. Here's what I have working in AS2 (This works in AS2 but not in AS3)::
if (info.code == "NetConnection.Connect.Success") {
drawing_so = SharedObject.getRemote("mySharedObj", main_nc.uri, true);
drawing_so.onSync = function(list) {
for (var n in list) {
var line_obj = this.data[list[n].name];
trace ("This name = " + line_obj);
So I got the synching working ( I know that's different) and running error-free but it won't parse the data, nor can I get it into an array as above. Here's what I tried::
if (cn.info.code.indexOf("Success") != -1) {
trace("I'M CONNECTED ");// < --- this works
drawing_so = SharedObject.getRemote("mySharedObj", nc.uri, true);
drawing_so.addEventListener(SyncEvent.SYNC, syncSO);
drawing_so.connect(nc);
and the EventListener function is ::
function syncSO(event:SyncEvent):void {
var myList:Array = drawing_so.data.list;
for (var n in myList) {
trace("N = " + n);
var line_obj = this.data[myList[n].name]; // < - - - not able to retrieve values from the sharedObject
trace ("This name = " + line_obj);
So I'm just not familiar with the terminology here.
Sorry - I went through all your excellent tutorials to try to find this and scoured the forum as well. Maybe this would be a good, simple AS3 to FMS 3.5 tutorial! B^)
Thanks for you help,
Bobkatzz

HI
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0c63b84-19e5-2910-fc81-f438716573d5
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/506eb432-0575-2b10-d986-8b41daa4d7af

What are the features of Data Replication

What are the features of Data Replication
Edited by: sdmuzdba on Mar 29, 2009 10:19 AM

You should refer to documentatin:
[Oracle Streams Replication Administrator's Guide|http://download.oracle.com/docs/cd/B19306_01/server.102/b14228/toc.htm]
[Oracle® Database Advanced Replication|http://download.oracle.com/docs/cd/B19306_01/server.102/b14226/toc.htm]
If it's not enough for you, could you explain your question more briefly please?
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com

Organization Model Before Data Replication

Dear SRM Gurus,
System:- SRM5.0 EBP5.5
I am stuck in CRM-Middleware, data replication from R/3 to SRM.
Can i still prepare ORGANIZATION MODEL, before replicating data.
Best Regards,
ANIL RAJPAL.

Dear Yann,
I have replicated Product categories from one R/3 site.
a) Am using SRM5.0 EBP5.5, should i run report to get vendors into PPOCV_BBP ?
b) In PPOMA_BBP - in attributes VALUE field is GREY - i cant put any entry in it ? have i missed any config ?
Best Regards,
ANIL.

Remote DP Data replication

Similar Messages

Maybe you are looking for