Remote-enable bapi to upload employee photos
hi,all
i need to upload emplyee photos from another application system to sap,but i have no idea about such remote-enable bapi.
can anybody show me one?
Regards
Darell
hi,all
i need to upload emplyee photos from another application system to sap,but i have no idea about such remote-enable bapi.
can anybody show me one?
Regards
Darell
Similar Messages
-
Remote enabled BAPI/RFC to upload a Resume
Is there any Remote enabled BAPI/RFC to upload a Resume and how to assign it to Applicant ?
I need to upload Resume from a .Net program and assign it as attachment or otherwise to Applicant.The reason for posting it here is this:
I used Remote Enabled FM BDS_BUSINESSDOCUMENT_CREATEF to create an attachment (.DOC word document) to APPLICANT Object. It works fine when executed from SE37.
When I execute(call) from .Net code, I get exception "ERROR_KPRO".
So I am looking for ANY way to attach or send Resume document into SAP and some how associating it with APPLICANT object, either by solving ERROR_KPRO or by suggesting any other way...
Thanks for the response -
Error while uploading employee photo
i m getting following eror while uploading employee photo through storage server
Error in HTTP Access : IF HTTP_CLIENT-RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Pls replyHi archana
you have to go with OAC0 tcode here in content repository double click on A5 which is standard one go in details-->clickon fulladministration then in that screen you will be having Basic path and Achive path there basis people need to give sapgui code.
they will be have this code in servermanagemt. i am not clear of this code where they can find. but i am sure of that this code will be given by basis people only. then go with OAOH tcode. give the details as usal and one more thing is that the photo should be save jpeg formate.
Regards
Suresh -
BSP error when trying to upload employee photo
,<h1>.Dear Experts,<</h1>
<h2>I am trying to upload employee photo on my SAP system DB.
I am following note 595563 and performing below mentioned activities.</h2>
<h3> * Make sure that the HTTP plugin is active.</h3>
<h4> Transaction SMICM, "Display Services" function key (shift F1). The list of services must contain a port other than 0 for HTTP. If not, you must adjust the relevant profile parameter.
Typical entry:
icm/server_port_0 PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
Transaction SICF, select: default_host - sap - bc - contentserver. Select the function to display/change the service. Check that a user is defined.
If a user is not defined, use Transaction SU01 to create a new user. Use the "System" user type. Assign the profiles SAP_ALL and SAP_NEW to the user.
Using the relevant data from the user that has just been created, maintain the anonymous logon data for the service /default_host/sap/bc/ and then save the changes.
Check the system PSE.
Start Transaction STRUST. Expand the system PSE. The system PSE must be green for each application server.
Determine a suitable exchange directory.
The archive system must be accessible from every application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application servers (for example,
server\share) is sufficient. You can generally use the global directory (profile parameter DIR_GLOBAL). You can use report RSPARAM to determine the profile parameters.
Setting up the storage
Create a table for storing the data.
Use Transaction SE11 to create a copy of table SDOKCONT1. If you want to create the repository database, you can call the table ZCONT_DB, for example. Save the table as a local object. Activate the table.
Create the repository.
Use Transaction OAC0 to create a new repository.
Use the following parameters:
Repository Max. two characters, for example, DB
Document area ArchiveLink
Storage type R/3 database
Storage subtype normal
Version no. 0046
Contents table <table name> for example: ZCONT_DB
Exchange directory <directory name> for example:
server\share\
Note that the exchange directory ends with a \ (or a / on Unix). If you are using a variety of platforms, you must use Transaction FILE to define a suitable logical file name, and use this file name.
Save the settings.
</h4>
<h5>
Everything goes well but when i try to test the Repository created by RSCMSTH0 in SE38 it throws the error </h5>
HTTP error: 404 Business Server Page (BSP) Error
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Business Server Page (BSP) Error
Please help. M i missing anything ..?
<h6>Regards,
Alok</h6>
Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AM
Edited by: Nikhil Manjrekar on Aug 14, 2009 9:45 AMHi,
I am getting same problem what is the solution??
Thanks
Santhosh -
Is it possible to upload employee photo into IT 0002 in ECC 6.0
Hello Guru's,
I have a requirement to upload employee photo's to Infotype 0002, so gone through all the steps in the threads posted here and felt that all were for R/3 4.6 n 4.7 only.
I have a different set up in few tables like OAC0 in ECC 6.0.
Request you all to let me know if uploading of employee photo is possible in ECC 6.0 ?? if so, let me know the configuration steps.
with screen shots are more appreciated.
Regards,
Priya.You'll find the customizing settings in :-
IMG - Personnel management - personnel administration - customizing user interfaces - change screen header.
Regarding the archiving part you better ask your basis admin to set that up for document type HRICOLFOTO.
2) Photo in the PA IT0002 In version 4.0B it worked
1. Define physical archives using transaction OAC0 Arx. ZZ
2. Assign objects types & document types to archive & documents tables for Obj PREL , doc.type HRIEMPFOTO,
Arx. ZZ using transaction OAC3
3. Define number range using transaction OANR
4. Using transaction OAC2 define doc.typ & tech doc types for exmpl. HRIEMPFOTO - TIF
5. Create protocol for Archive link using transactions OAA3 for exmpl. Comm.prot.,version. Generate it will define
application type from list and so on.
6. In the table 585O define relevant infotype for object and document type for exmpl. for it0002
7. Using transaction OAAD create link for PERNR with relevant infotype & files on the server, which described on the
first step.
Link:Uploading Employee photos against IT0002 in ECC 6.0 -
Uploading Employee photos against IT0002
Hi,
We have a requirement to upload photos of all the employees of our client to their Personal Data infotype through transaction OAAD. I have written a BDC program for that and tried to upload through session method in foreground. Its working fine, but while picking the photo of a particular employee, its asking me to select the photo. Our requirement is once we start uploading the photos, we will run this in background. So it should not ask us to select the photo, instead it should pick the photo from the path given in the file.Our file contains Personnel Number and the path of the photo corresponding to that personnel number.
Please let me know your suggestions.
Thanks in advanceHi
Check this Upload Employee Photo into SAP
Manoj Shakya -
Uploading employee photoes to infotype 2
I want to upload employee photos to Infotype 2 .
Can anybody help me out in this regards?Hi,
check this links
http://www.saptechies.com/employee-photo-upload/.
Employee Picture Upload in SmartForm
wiki.ittoolbox.com/index.php/HOWTO:Upload_a_photo_in_SAP_HR
Regards
Gaurav -
Remote enabled BAPI/RFC to create VACANCY in Recruitment
Is there any Remote enabled BAPI/RFC to create VACANCY in Recruitment?
I need to create VACANCY from external .Net program.
Thanks.closing to post another question
-
Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)"
Is there any Remote-Enabled BAPI/RFC for creating "Request Special Payment (SPSP)" which is one of the Personnel Change Requests under MSS ?
Thanks.closing to post another question.
-
Upload Employee Photo into SAP
Hi,
Due to employee photo is stored as ArchiveLink and I tried to upload it by LSMW, but it doesn't work. I was wordering that, the document that stored in ArchiveLink can be uploaded by LSMW or not.
Has anyone used to upload employee's photo into SAP? If so, how?
Thanks in advance.Dear Sakchai,
Refer to the following link for step by step procedure:
http://wiki.ittoolbox.com/index.php/Upload_a_photo_in_SAP_HR
Sample program from http://sap.ittoolbox.com/groups/technical-functional/sap-hr/massive-upload-photo-1211577
REPORT ZHR_BDC_UPLOADPIC
NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE
INCLUDE BDCRECX1.
I N T E R N A L T A B L E S
DATA : BEGIN OF IT_DATA OCCURS 0,
RP50G-PERNR(8), " LIKE RP50G-PERNR,
RLGRAP-FILENAME(128),
END OF IT_DATA.
S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
PERFORM OPEN_GROUP.
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = 'C:\PICTURE.TXT'
FILETYPE = 'DAT'
TABLES
DATA_TAB = IT_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
IF SY-SUBRC NE 0.
WRITE : / 'Unable to upload data'.
STOP.
ENDIF.
LOOP AT IT_DATA.
PERFORM BDC_DYNPRO USING 'OANEWCON' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'TOAOM-AR_OBJECT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=NEW'.
PERFORM BDC_FIELD USING 'TOAOM-SAP_OBJECT'
'PREL'.
PERFORM BDC_FIELD USING 'TOAOM-AR_OBJECT'
'HRICOLFOTO'.
PERFORM BDC_DYNPRO USING 'SAPLSJ01' '0200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'FIELD_VALUES-INPUT(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OK'.
PERFORM BDC_FIELD USING 'FIELD_VALUES-INPUT(01)'
IT_DATA-RP50G-PERNR. "'10002'.
PERFORM BDC_FIELD USING 'FIELD_VALUES-INPUT(02)'
'0002'.
PERFORM BDC_DYNPRO USING 'SAPLOPTM' '0105'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'SAPB-SAPPOOLINF'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=OKAY'.
PERFORM BDC_FIELD USING 'SAPB-SAPPOOLINF'
IT_DATA-RLGRAP-FILENAME. "JPG'.
PERFORM BDC_TRANSACTION USING 'OAOH'.
clear IT_DATA-RLGRAP-FILENAME.
ENDLOOP.
PERFORM CLOSE_GROUP.
Regards,
Naveen. -
Standard remote enabled bapi for creation of purchaser contract in srm
Hello Friends
Plz tell me is there any standard,remote enabled FM/BAPI in SRM system for creation of purchaser contract.
I found BBP_PD_CTR_CREATE. But this is normal FM.
I need BAPI like BAPI_CONTRACT_CREATE which there in ECC system.
Plz help.
Thanks & regards,One idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.
-
Error in uploading employee photo
Hi,
I am trying to upload employee jpg photo in 0002 infotype. I have done basis settings and confige in T-Codes OANR, OAC2, OAC3, SICF, OACO,
But in OAAD I selected Store and Assign Icon, thee i had given business object as prel and document type as hricolfoto then i selected create button after that one pop-up window will come ask necessary data. there i had given personnnel number and infotype number as 0002, subtype- blank, object id 02, date of orgin as hiring date, then i had selected jpg phot from desktop . once i selected the photo it through the below error.
Repository A2 not accessible by HTTP.
Pls through some light on this.
Regs,
BrahmaHi Brahma,
Re: Photo Upload
regards,
kitchlu -
Error while uploading employee photo to infotype
hi friends, i am getting error *401 HTTP* while uploading photo to infotype(in ECC 6.0).I tried 3 times but same problem, can any one say how to solve this.
Edited by: nr on Sep 16, 2008 12:48 AMNR,
Where do you want to upload the photos?is it to SAP database or some other third party repository.check whether you have proper rights or not and if it is a third party one check whether it is up and running and your network firewall is not blocking that -
Uploading employee photo in EP
hi,
i am able to upload the employee pic in the back end R3 system and its coming fine when i go to PA30. My doubt is > do i have to upload the image separately in the EP so that it appears in ESS> who's who section?
or should it appear automatically once its uploaded in the backend system ?
regards,
aditiaditi,
the who is who uses the same archivelink/contentserver as the backend (PA30). but you have to make sure that the contentserver is reachable from the clients browsers, because the portal just delivers the URL to them.
kr, achim -
Need to upload employee photos against infotype 0002
Hi,
We have an urgent reqirement to load the photos of all the employees agianst the infotype 0002 which need to be accesed by the employees and managers via enterprise portal.
Can anybody help me....
Thanks in advance
KrishnaThe steps provided you are very appropiate , but you can also check the following settings incase you dnt achieve your requirements.
Q. How to attached the Photo in IT0002
1.Create a number range for SAP Archive Link :
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain number ranges.
Tcode OANR. Create range 01 from 0000000001 to 9999999999 without the external number flag.
2.Document type HRICOLFOTO must exist with document class JPG.
IMG>Basis Components>Basis Services>SAP Archive Link>System Settings>Maintain document types.
Table TOAVE, Tcode OAC2.
3.Document type HRICOLFOTO must be linked to object type PREL and IT0002.
IMG>Personnel Management>Personnel Administration>Tools>Optical Archiving>Set up Optical Archiving in HR.
View V_T585O, no Tcode. In all three columns there ara minuses, dont put a flag in the check box.
4.Check which content repository (Archive) is linked to document type HRICOLFOTO and object type PREL.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain Links.
Table TOAOM_C, Tcode OAC3
5.Create this content repository with storage type FILE archive.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain content repositories.
Tcode OAC0
Storage type FILE archive can be attained by clicking on the field Storage type and clicking somewhere else in the screen with the right mouse button. Choose Possible entries and only then you get a list of all values. FILE Archive is entry number 08. Choose Version no. 0031 and Archive path something (e.g. C:\).
6.Link photo to personnel number.
Menu>Tools>Business Documents>Miscellaneous>Stored Documents. Tcode OAAD.
Click on the Create button. Business object PREL and Docyment type HRICOLFOTO. Click on create (fill in the right personnel number in the pop up and click Continue). Choose the photo (as a JPG file) from the place where it is saved (e.g. hard disk). SAP will notify that the Stored Document was created succesfully. Photo is visible via PA10, PA20, PA30, PA40. Double-click to magnify photo.
To delete archived document :
Tcode OAAD, click Find. In docyment type field select HRICOLFOTO and after execute you get a list of all documents. Select appropriate document and click on delete icon.
thnkx
bhanu
Maybe you are looking for
-
THIS IS A RE-POST OF THE QUESTIONS previously posted, PREVIOUSLY POSTED, now adding a request that 3 new summary questions--at the bottom--be answered. NOTE: I specifically need answers to the 3 new, summary Qs now posted at the bottom of the Sequenc
-
How to send HTML mail with images multipart/related message
Hi, Could any body tell me how to send HTML mail with images in "multipart/related" message,if any body can give the code ,it would be helpful. Thanks
-
ITunes 11 - Dragging unselected playlists to playlist folder?
I created a playlist folder so I can organize my playlists better, but after dragging a few playlists into the folder it begins to drag playlists that I did NOT select. There's nothing wrong with my eyes, I've recreated this problem multiple times an
-
Pressing the button "Shift b" doesn't work
it been less then a week since i brought my macbook pro and i realize that pressing the button "shift b" doesnt capitalize the letter "b" i have to press "caps lock b" in order to get the capital 'B". Doesnt seem like a big deal but i just bought com
-
Hallo Can anyone help me how to display popup error message in webinterface before saving data, My requirement is to save data only if certain condition is met otherwise i need to display error message to user . Rds Hans