Remote for iPhone

Many people with this ... remote app no working in Snow Leopard 10.6.2, iTunes 9.0.3, iPhone 3.1.2 ... Here's what I've tried so far:
1) Re-created my iTunes library.
2) iTunes>Preferences>Devices> "Forget All Remotes"
3) Created test account on Mac Pro with fresh iTunes library
4) Re-installed iTunes.
5) Turned off my firewall.
6) Open ports in my router.
Apps like SnowRemote or iReciver have the same problem... APPLE need to do something with this!!!
I am able to type in the code but at that point it says it cannot connect to my library due to my firewall. This is impossible because the firewall is off.
Remote app running in Leopard NOT in Snow Leopard, try in 3 Mac´s, one of them with Leopard, running OK!!, 2 with Snow Leopard, guest what? same problem!!!
Any help?

YES, you're right! Just found it, tap the screen whilst song is playing and a speakers menu pops up! Doh! Seems so simple now, sometimes when things are right in front of you.....!!
Thanks for your help

Similar Messages

  • Remote for iPhone - Choosing speakers

    Ever since they brought out an update for Remote for the iPhone I have been unable to change the speaker selection. Where has the option gone? It used to be under settings but I cannot find it. Am I being really dense?

    YES, you're right! Just found it, tap the screen whilst song is playing and a speakers menu pops up! Doh! Seems so simple now, sometimes when things are right in front of you.....!!
    Thanks for your help

  • Remote for iPhone 3GS

    There are lots of discussions out there and lots of sites (via Google search) regarding iPhone apps that turn your phone into a remote. What I'm looking for however (and having the hardest time finding) is a remote to control my iPhone 3GS. In otherwords, is there a product out there (or does the apple remote maybe do it?) that will allow me to plug my iPhone into a stereo via the headset jack and then switch songs forward/back etc.? Thanks in advance!

    Hmmm... I've had two vehicle intergration kits that included remotes. Unfortunately they also included a mount and power plug (cigarette lighter type). They both basically included a receiver that plugged into the dock that the remote "spoke to". I have a hard time accepting that no one has taken the technology and just removed the power plug and mount.

  • IPhone remote for iPad

    Hi there
    Does anyone know if it's possible to set up the iPhone as a remote for the iPad? I have my music collection on my iPad which is plugged into my home hifi and would like to be able to make music selections on the iPad using the iPhone as a remote. Any steer in the right direction appreciated.
    Cheers
    Message was edited by: dsnuk

    Hi,
    Yes.
    I use Tango to control my iTunes library from my iPhone.
    http://itunes.apple.com/us/app/tango-remote-control-music/id345279970?mt=8
    Make sure and install the Tango app on both devices.
    Launch the app on your iPhone and follow the instructions. Very easy to use.
    After the app discovers your music library, tap "More" at the bottom of the app window then tap Settings. You can enable the iPhone so you just "shake" it to play the next song.
    Carolyn
    Message was edited by: Carolyn

  • Home sharing for iPhone 4; Remote App

    Am using Windows XP desktop which is connected to router with Ethernet and my iPhone 4 uses the Wi-Fi.
    Got latest version of iTunes.
    Latest version of Remote.app
    iPhone OS 4.3.3, not 4.3.5
    I followed this guide to implement the inbound settings since it isn't available on Windows XP the way it is available on Windows 7:-
    [CODE] no-ip . com/support/guides/routers/configuring_windows_xp_firewall.html[/CODE]
    The port number i entered for TCP is 3689 and named it as bounjourport(the name shouldn't matter).
    mDNSResponder.exe is also running.
    And am still unable to locate my iPhone in iTunes for 'Remote App'. Actually there isn't any "Devices" list present on iTunes, though it appears when i connect the phone with USB. Also tried port forwarding on router, still no change.
    Please help!!
    **My previous phone was Sony Ericsson w995 which supported DLNA and i could access my phone files through the same PC with Ethernet connection to the router, so i guess this should be possible for iPhone too.
    Thanks in advance.

    Anyone help me please?

  • Iphone with ios6 as a remote for apple tv - song sometimes skips

    I use iphone with ios6 as a remote for apple tv but sometimes a song skips while playing. What can I do to stop this?  Very annoying as I'd like to use it for a party. Thx

    Sure.
    https://itunes.apple.com/ca/app/remote/id284417350?mt=8

  • HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

    how do you connect an iphone to be a remote for Apple TV without the apple remote?

    you can use the remote app.
    http://www.apple.com/apps/remote/

  • How do I use my iPhone as a remote for my apple tv

    I am trying to use my iPhone or iPad as a remote for my Apple TV, but on my TV screen the "add remote" option is grey and cannot be selected. Any suggestions? Thanks, Cliff

    Welcome to the Apple Community.
    If you have already turned on home sharing on the Apple TV, then the Apple TV should simply show up in the remote app without you having to do anything else.
    Unfortunately, if you haven't yet enabled home sharing, you can only do so with the original remote and you'll need to purchase a replacement from the Apple Store.

  • TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Hi, i want to use my iphone as a remote for my itunes i have downloaded the app, turned on home shareing on my laptop and they dont seem to be talking.

    hi,
    i have dowloaded the app "remote" to use my iphone as a remote for my itunes library, i have turned on home shareing on my laptop. they dont seem to be talking to each other. i have also tried the other way of adding a library on my iphone, but my laptop wont show my phone on the devices list.
    anyhelp would be apreciated

    Turn off home sharing, you don't need that. Open Itunes Preferences from the computer. Go to the devices section. At the bottom you will see the option to add a remote access that and follow the steps.

  • My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam. i want to know if they are OEM?

    My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam right in the cord. i want to know if they are OEM? here my email: [email protected], thanks.

    Accidental damage is not covered under the warranty but if possible to reset the screen without causing additional damage, the Apple Store should do this without charging for it.

  • I would like to know if there is such an app that allows my iPhone to act as a remote for my iPad ie if I'm recording something on my iPad I can use my iPhone to press record/play/pause/forward or rewind my iPad via my iPhone

    I would like to know if there is such an app that allows my iPhone to act as a remote for my iPad ie if I'm recording something on my iPad I can use my iPhone to press record/play/pause/forward or rewind my iPad via my iPhone

    As the King says, if your friends wifi router was relatively new, it likely has not been picked up by Apple's location based information database system and thus there is no location information associated with it.  So your iPad had no way of getting its location.
    The wifi location databases are traditionally updated by wardriving - literally companies employ people to drive around sniffing out active wifi signals and associating an approximate location to it.  Some companies also have web sites to submit that information if owners wish to (Apple does not seem to have one though), and the various companies with wifi location databases buy and sell their information.  Bottom line is though, it can take weeks, months or sometimes even longer for a residential router to get picked up - depends on where you live (more rural, likely the longer time it takes).
    When I moved from VA to NC it took up to 6 months for mine to reflect my new location (I checked it once the week I moved in, and then periodically thereafter, and it finally was getting it right after about 6 months) and I live in a pretty densley populated area (triangle NC).

  • Printer control app for iphone

    is it possible to roll back to a previous version of the Printer Control app for iphone?  I recently and stupidly updated the HP Printer Control app when offered through itunes on October 30 and have lost all the functionality I previously had to print directly from my iphone to my photosmart 7520.  Previously I could print whatever pages I chose from Safari and could change the print settings for either draft or normal, colour / black & white before printing.  Now when I try to print a page, you don't get the option to just print page 1 and it wastes ink.  If I open a pdf (all I've tried so far) document within this new AiO Remote app - even though my printer is listed and supposedly set up - I can't print at all!  I desperately want to ditch this abysmal update and go back to the version that worked perfectly.  I have conctacted Apple and they were unable to help as it's a third party app and referred me back to HP.  Does anyone know how to do this?

    Hi brattynat. I have found a few older documents which might help you revert back.
    Just to clarify, when you print from Safari, what are you clicking exactly to start your printing process?
    How do I downgrade an iPhone app to a previous version?:
    http://www.iphonefaq.org/archives/971543
    Recover Older Versions of iPhone Apps After Updating:
    http://gigaom.com/2010/08/25/recover-older-versions-of-iphone-apps-after-updating/
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Keynote Remote for iPad

    I'm not looking to control Keynote on the iPad, but rather use my iPad as a Keynote Remote for my MacPro running Keynote for Mac.  I have it on the iPhone, but running Keynote for Mac 'remotely' from my iPad would be better for me.  I run photography workshops and courses and in my studio my MacPro is connected to a 42" display that I run a Keynote presentation on.  I've been controlling it with Keynote Remote on my iPhone, but would rather use my iPad as the remote.

    Although I have it on my iPhone, I couldn't find how to install it on my iPad.  Thought it wasn't compatible.  Found it through my "Purchased Apps" on the iPad (App Store) and hit install.  Thanks for verifing that it was compatible and I just had to dig a little deeper.
    Wish they'd come out with a dedicated iPad version with a few more features rather than just a 2X view of the iPhone app.

  • ITunes remote for iPad?  Cropping the info bar request...

    Sorry about the double idea here but remote for the iPad would be nice like as is on iPhone and also the ability to crop a screenshot without 3rd party apps would be nice too.

    No point telling us - we are all just users like you.
    Tell Apple your idea here http://www.apple.com/feedback/

Maybe you are looking for

  • Can I install Windows 8.1 on my mid-2010 MacBook Pro?

    Can I do it or I will get an error saying that it is incompatible and cannot be installed? I need to know before I buy. As far as I am concerned I does meet the minimum system requirements suggested by Microsoft by a long shot. Will boot camp allow i

  • Icons in Forms 6i

    I have an application which is working on Windows NT/workstation (client server) and forms 6i Now the problem is the icons in the menus and other places are not appearing .. only some icons like save clear have appeared others like query etc do not a

  • DAQCard6062E hangs intermittently during acq

    Code written in VC++ 6.0, NIDAQ 6.9.3, OS: Win2000&98, various laptops from P2-450MHz to P3-1.2GHz. Using SCAN_Start for continuous mode acquisition to a single buffer (16 channels, 20KHz). After a variable number of samples acquired (usually around

  • Slow scrolling & lag problems using Office with new iMac desktop OS X Lion

    Just bought a new iMac 21.5 desktop with OS X Lion after using a PC with windows my whole life. Downloaded latest version of Microsoft Office to use with my spreadsheets for my business and found that whenever I use larger spreadsheets and use filter

  • New computer w/Vista

    I think I am probably doomed!  I have a new computer w/64 vista and an old Palm Pilot that I cannot get to work.  I also have a XP computer, so need to beable to sync both if possible? I have downloaded everything I can find on Palm.  I do have bluet