Remote for iTunes in a Two-PC Network

I've added the "Remote for iTunes" app to my new Android-based phone; but, it's iTunes on my wife's PC that recognizes the application rather than mine. Home sharing is turned on. Windows 7 on both laptops.
Suggestions as to how to go about changing the arrangement, so that my iTunes is the one that recognizes the remote phone app?
Thanks very much.
Message was edited by: RCW1126

Not sure if this solution has been discussed.. I try to read the other posts, but am short on time.
I too have had issues where the apps would not be updated even when tethered through iTunes. I was finally able to resolve this problem by restoring the phone... which seems to wipe the phones operating system clean.
Just deleting the individual apps and trying to have itunes reinstall them doesn't seem to work, (I've tried that method first), because the problem seems to be a glitch in the OS... that no app can hurdle over.
This is by far the longest way of fixing the problem but it seemed to work for me. So backup the phone, then press the "restore" button...
Hopefully that helps.

Similar Messages

  • Remote for itunes on shared library

    Hello.
    On my mac mini in the living room is attached a USB drive with all music for itunes. The remote app on IOS works fine for this mini.
    In my office on the same lan I have a mini which uses home sharing to see that library. However its headless straight into a hifi.
    For the life of me I cannot owrk out how I can play music from the home share through this mini, is it possible? All the remote app shows is the few songs it has in its native library.
    Any help appriciated because it seems to detract from the point of the home share thing.

    Hi Gary,
    Thanks for visiting Apple Support Communities.
    You should be able to access your Home Sharing library with Remote by pairing the two using these steps:
    Pair Remote with your Home Sharing network
    To use Remote 2.0 (or later) with Home Sharing, every iTunes library you want to control must have Home Sharing turned on. For more information, see Use Home Sharing to import items from another iTunes library.
    Tap Remote on your device’s Home screen.
    Tap Settings.
    Tap to turn Home Sharing on.
    Type your Apple ID and password, and tap Done.
    Tap the iTunes library or Apple TV you want to control.
    For more information, see the Remote Support website.
    You can find these steps and more information here:
    iTunes 11 for Mac: Use the Remote app to control your iTunes library
    http://support.apple.com/kb/PH12157
    Best Regards,
    Jeremy

  • Remote for iTunes on a networked XP desktop

    I have not been able to get the Remote app for iphone to connect to my large iTunes app on my Windows XP desktop. When I launch it on the iphone in my home, it immediatly finds my son's XP laptop, which is connected to the same network that the iphone is. That laptop can also see the desktop computer where my iTunes is, which is phyisically connected to the WiFi router that my iPhone is talking to, but of course the desktop is not connected via WiFi. Is there a way to get these to talk, or do I have to move my collection to a laptop, or put a wireless card in the desktop (which I won't do) to get these to see each other? BTW, I have already done all of this: http://support.apple.com/kb/TS1741
    Any help much appreciated. I am wiring my computer to my stereo via an airport express (not yet purchased) and this would make the system work beautifully!

    Not sure if this solution has been discussed.. I try to read the other posts, but am short on time.
    I too have had issues where the apps would not be updated even when tethered through iTunes. I was finally able to resolve this problem by restoring the phone... which seems to wipe the phones operating system clean.
    Just deleting the individual apps and trying to have itunes reinstall them doesn't seem to work, (I've tried that method first), because the problem seems to be a glitch in the OS... that no app can hurdle over.
    This is by far the longest way of fixing the problem but it seemed to work for me. So backup the phone, then press the "restore" button...
    Hopefully that helps.

  • Remote for iTunes?

    I've got an iphone, and one of my favorite apps is the "Remote" app to control iTunes. Is there a similar app for the Mac that I can run, either in dashboard or as a standalone? It's frustrating that I can 'see' shared music through itunes, but I can't control my iTunes music server via my iTunes or via another app.

    I just installed TuneConnect, which has a server side piece, and a then a client that can sit on another machine. It seems to work pretty well so far, and also works with last.fm, which is groovy.
    However, it doesn't play quite so well when you've used the apple remote on the iphone to start playing, and then gone to your laptop to change things (it crashed when I did this). I don't if I'd see a similar problem if you had been controlling the music on the server, and then went over to the remote machine ... haven't experimented with that yet, and my couch is too comfy for me to be bothered to test now Pretty minor quibble, but thought it might be worth mentioning ...
    http://www.tuneconnect.net

  • How can I use my iPod Touch as a remote for iTunes, while connected via USB?

    I was wondering if I could use my iPod touch as a remote/iTunes extension while it is connected to my computer via usb.
    It would be highly practical to control my music from there, since it is charging right by my side while I'm at my computer.
    Remote is not really an option, my computer doesn't have bluetooth or any connectivity. Something over wifi would work, but there's a usb connection right there that's begging to be used.
    Thanks

    You can't do it via USB.  Go to the App store and download/install the Apple Remote app.  It can control iTunes on your computer via wifi.

  • Can't Connect to Named Instance Remotely for One of the Two Instances on a Server

    I have posted on a wrong forum.
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4739b07e-6a5b-42c1-99a3-92b51eef5383/strange-connection-issues-with-instance-name?forum=sqlgetstarted
    I hope I can get some feedback from this forum.
    Thanks.

    Hi ikongal01,
    Please refer to the further discussion about your question from your original post:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/4739b07e-6a5b-42c1-99a3-92b51eef5383/strange-connection-issues-with-instance-name?forum=sqlgetstarted

  • Can not verify remote passcode - iTunes Remote

    HI,
    I had a lot of trouble trying to get my android Remote for iTunes App paring with iTunes succesfully on one particular PC
    Initially I though the issue was to do with the app, but it turned out to be caused  by a design flaw with the iTunes Application.
    Viewing the network traffic with Wireshark, I could see that once the Verification Code was entered into iTunes it did not respond directly to the IP address of the requesting device (as it should do), but it was sending the response to the Web Proxy Server address, which iTunes gets from Windows Internet Settings)
    To correct, I disabled the proxy in Internet Explorer and retired. (Start iExplorer, Tools - Internet Options - > Connections > Lan Settings
    Once paired, you should be able to renable your Proxy.
    Hope this info is helpful to others.
    G

    I've just had the same problem and thought I'd throw in what solved it for me:
    Running iTunes 9.02 on two Mac Mini's in my house (both running Leopard 10.6.2). One paired up with the iPhone remote straight away, but the other would always lock up after entering the 4 digit code.
    They're both connected to the same network in the same way (ethernet), firewall and all other sharing settings were identical on both machines. I even unpaired and re-paired from the working machine to check that it really was fine.
    I tried just about everything:
    - playing around with just about every security setting
    - restarting the machine / router
    - restarting the iPhone
    - trying to connect the iphone over an adhoc wifi network
    - checking disk permissions with Disk Utility
    - deleting all iTunes preference files and starting again
    In the end I finally solved it this morning -- It turns out there was something wrong with my iTunes Library itself. If I moved my existing library files out of the iTunes folder and restarted iTunes (to create a new, empty library), the pairing worked straight away! But as soon as I put the old library files back into place, iTunes would again lock up when I attempt to use the Remote app.
    So, the solution for me has been to create a new Library and re-import all my music / podcasts (which isn't too much of an issue for me). Remote App is now working flawlessly, as it was on my other Mac from the beginning!
    Hope that might be of use to someone....
    Cheers,
    John

  • HT3204 My iTunes cannot find my wireless network and I get erros saying I am not connected to a network.  What is the best way to resove this issue?

    Getting error message:  iTunes couldnot connect to the iTunes Store. An unknown error occurred (0x80092013)  Make sure your network connection is active and try again.  Obviously my network is active, or I would not be able use my internet connection to enter this community.  I have a Telus TwoWire Wireless modem.  I used the iTunes for Windows:  Network Connectivity Tests and found that it was finding my adaptors, but could not connect to my Wireless network.  can someone provide a method for iTunes to recognize my wireless network.  I can find lots of info on connecting to a WiFi iDevice, but nothing so far about setting up iTunes with my wireless info.  iTunes does not have seek network function in the settings, or at least I cannot find one.
    Thank you.

    Hi MeMiri,
    Welcome to the Support Communities!
    The article below will walk you through the troubleshooting steps for connectivity issues with iTunes:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Second MAC computer as remote Airport Speaker for iTunes?

    Hello all,
    On our MacBook, iTunes is playing all our favorites. Does anybody know whether it is possible to set up another Mac in the same Network as a remote speaker for iTunes? I know about AirFoil but I would prefer something like the "client part" of AirFoil which can directly connect to iTunes.
    Thx for any hints on that!

    That's not what I want. The music should be the same and in sync on both MACs. Our MacBook is on the ground floor while an iMac is on the first floor.
    It should be just the same like using AirPort Express. I would like to have the iMac be available as AirTune-Speaker in iTunes on the MacBook.
    I guess it should be possible somehow, as it cannot be a matter of hardware.
    Thx for any further ideas!
    Message was edited by: Thomas Halenbeck

  • I can't connect to iTune Store nor to radios, with the aid of iTune,check for updates, these last two from aid, but if you communicate with support.Please the answers in spanish.

    I can't connect to iTune Store nor to radios, with the aid of iTune,check for updates, these last two from aid, but if you communicate with support.Please the answers in spanish.

    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the  Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
    2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • HT204053 i RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    I RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • 3GS doesnt recognise sim. Status switches between 'no sim' or 'searching' ? If it does find the network it only keeps it for a minute or two.  Please any suggestions welcome.

    IPhone 3GS doesn't recognise sim card. Status either says no sim or searching.  If it does find network it's only for a minute or two?? Any ideas?

    YEs sorry I should of said. I tried a different sim in my phone and the same thing happened and tried my si
    IN a different phone and it works ok.  I've also tried restoring it to factory settings.

  • The computer I use for Itunes only has XP so I can't use ICloud. My desktop has Vista so I can use it. But I don't want to lose all of what I have on my Iphone 4S and my two Ipads. How can I use the desktop and retain the apps, music, podcasts etc. I have

    The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
    I have a desktop that operates using with Vista.
    I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
    I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
    Isn't there a way to do this? Shift my library FROM my devices to the desktop?
    Thanks

    This is a tedious solution, which is stupid!  And some users report an inability to reauthorize a computer after an "en masse” deauthorization.  I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
    And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

  • I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • HT204074 I have a family Apple ID for iTunes and Apps and then two iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match?

    I have a family Apple ID associated with my iMac and iPad for iTunes and Apps and then two new iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match on the iPhones given there are two Apple IDs "loaded" on the iPhone?

    Hi Monkey_Dawg,
    Welcome to the Support Communities!
    The articles below may be able to help you with this.
    Click on the links to see more details and screenshots. 
    iTunes Store: Subscribing to iTunes Match
    http://support.apple.com/kb/ht4914
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Cheers,
    - Judy

Maybe you are looking for

  • IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

    IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

  • How to add values in a List item using code

    Hi all, I want to populate a list item at run time with the values of my choice. im using this add_list_element('list34',1, 'Name','Smith'); or add_list_element('list34',1, 'Name',:emp.txtname); where emp is my data block and txtname is a text field

  • Capturing from firewire to new macbook pro in FCS 7.0.3

    I'm thinking about buying a new macbook pro but it doesn't have a firewire input and my camera (Sony HC9) uses that for output.  Can I log and capture to FCP 7.0.3 through a firewire adapter or through the HDMI input on the computer.  thanks. Steve

  • Bcc Not Working Correctly

    I put a group address into the Bcc field, yet the individual addresses/names showed up in the received message. I have unchecked "When sending to a group, show all member addresses" in the Composing window. Any ideas on what I'm doing wrong? Thank yo

  • Dynamic retrieval in list boxes using JSP

    Dear All, I have a list box in a form which is created by extracting data from oracle database. There are approximately 26000 records which are added dynamically in the list box. There are five rows in the form and each row has to have a list box wit