Remote for taking iPhone 4 photos?

Is there a remote that I can buy to make my iPhone 4 take a photo?
Thanks.
mac

Thanks wjosten.
I thought the op was referring to a camera remote switch that would connect to iphone.
Thanks again for the info. Did not know that was an option.

Similar Messages

Reverse Remote for the iPhone

Dooes anybody know of a reverse remote control for the iPhone? This will be helpful in cases where you missplaced your iPhone or had it stolen. This would allow you to login into a website and access your iPhone and if you have installed a App to send an e-mail location of itself, this will help you find it.

Very good idea. However there are two big problems preventing this to work. 1. The App would have to be running. 2. The phone would have to maintain a solid IP address for you to be able to connect.
Also because of the accuracy of the GPS, it wouldn't be able to tell you "It's under the couch"
Overcome these two problems and it could work.

What are the best settings to use on the Sony Cybershot DSC HX1 for taking portrait type photos?

I have used the portrait setting on the SCN selection but always end up with fuzzy edges on my photos. Are there manual settings that I can adjust that would correct this problem? I have done every other techniqe that I can find to "stabilize" the camera and no matter how still I stand, I still end up with fuzzy edges. Any ideas?

Hi bethstange,
Welcome to the Sony Community!
May I ask if this fuzziness show up when you're not using the Portrait mode? Portrait mode will give you an image with a blurred background while the subject is sharpened. We don't recommend this mode when taking group shots as the subject in the center of the image will be the only one in focus. For everyday shots, we recommend setting the drive mode to Intelligent Auto. This setting will automatically detect and adjust the shooting settings for you. No need to change the Scene modes for different scenarios.
We recommend using the SCN modes when you intend to shoot a certain type of scenario without changing the type of subject. An example would be setting the camera to shoot Landscapes, this setting will give you a wider depth of field than shooting portraits of people.
More information about the camera is available here.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

Remote for iPhone - Choosing speakers

Ever since they brought out an update for Remote for the iPhone I have been unable to change the speaker selection. Where has the option gone? It used to be under settings but I cannot find it. Am I being really dense?

YES, you're right! Just found it, tap the screen whilst song is playing and a speakers menu pops up! Doh! Seems so simple now, sometimes when things are right in front of you.....!!
Thanks for your help

Can anyone tell me how to transfer photos from iphone 5 to my computer? my computer doesn't recognise my iphone as camera or drive at all and there is no option for me to down photos from itune either

Can anyone tell me how to transfer photos from iphone 5 to my computer? my computer doesn't recognise my iphone as camera or drive at all and there is no option for me to down photos from itune either

Try taking a new picture with your iPhone then reconnect it to your computer.

IPhone remote for iPad

Hi there
Does anyone know if it's possible to set up the iPhone as a remote for the iPad? I have my music collection on my iPad which is plugged into my home hifi and would like to be able to make music selections on the iPad using the iPhone as a remote. Any steer in the right direction appreciated.
Cheers
Message was edited by: dsnuk

Hi,
Yes.
I use Tango to control my iTunes library from my iPhone.
http://itunes.apple.com/us/app/tango-remote-control-music/id345279970?mt=8
Make sure and install the Tango app on both devices.
Launch the app on your iPhone and follow the instructions. Very easy to use.
After the app discovers your music library, tap "More" at the bottom of the app window then tap Settings. You can enable the iPhone so you just "shake" it to play the next song.
Carolyn
Message was edited by: Carolyn

How to not have songs duplicates in app remote? I have playlists for my iphone and playlists for my pc. All songs of my iphone are also on my mac. When i use the remote app, it plays everything in double.

Dear all,
I am using itunes to control all my music and i like to use my iphone, or my ipad to control my music with the remote app.
But i have a problem: all the music i have in my iphone count as double play.
To explain everything since the beginning, i personally don't like and don't trust at all the music sync capability of itunes.
So i have my music on my pc, and i load every type of music as a single playlist (ex a Pop-Rock folder, with all artists folders and so on, makes me a Pop-Rock playlist).
For my iphone, i created a iphone music folder, with the same classification.
It means that i don't have all my Pop-Rock music, only a selection. But of course the selected music appears also in my complete music collection.
So in itunes i created a folder playlist named iphone music, with inside one playlist by type of music (exemple : Pop-Rock, which contains some files of my main Pop-Rock collection).
So i do have duplicates in my hard drive. But when i selected the playlists to be shared on home sharing in itunes, i selected only the main playlists, not my iphone playlists! But still, when i look for ACDC artist for example, i should see only what i have on my pc, not what i have also on my iphone.
The result is if i play an album for example Back In Black (i have it full on my hard drive, and full on my iphone too), then every song is displayed in remote app in double, and also played in double:
Here is how it is displayed:
Song 1
Song 1
Song 2
Song 2
So the remote app plays Song 1 one time, then Song 1 (the second Song 1) one time and continues like this to Song 2 etc...
I guess that if i put my selection of songs on my ipad, i will then have everything in triple....
It is very annoying. Is there a way for me to change that? Or for an update to be made (based on ID3 Tag) to not play everything twice or more? It would have an ID3 Tag No Double toggle button.
I don't want to select from my main music to send elements to my iphone as doing that i lost a lot of music multiple times. This way of doing is not safe at all (at least for me).
What is possible to do? Is there room for improvement here (i believe so). Is there a way for me to avoir this very annoying effect?
I would really like to put my music to my iPad2 also, but after i'll have triple play....
Thank you for your help.

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

Why does it take so long for the iPhone to recognize when space has been freed up for photos?

The short story:
I try to take a photo using the built in camera app. I get the dreaded 'no enough storage' message.
I then delete a bunch of photos, podcasts, etc. effectively freeing up plenty of space to take a photo.
Nope - iPhone Camera still things there is no space available.
After some unknown time delay - 10 minutes or more, in many cases, it will FINALLY let me take a photo.
The longer and more detailed story:
I know EVERYONE gets this message at one time or another and I know how to resolve it: "Cannot Take Photo - There is not enough available storage to take a photo. You can manage your storage in Settings."
Fine. I understand that. I'm out of space on my phone (not iCloud, as some users seem to confuse). It's a no brainer - you don't have enough space on your phone to take a new picture. Again - fine, I get that.
What I DON'T get, and what drives me absolutely NUTS, is that I will then go through my photos and delete a dozen or so that I don't really want, easily freeing up a good 20Mb or more, then when I try to take a photo again, I STILL GET THE out of space MESSAGE! Baloney. I am NO LONGER out of space. iPhone, you incredibly well designed and intelligent piece of hardware, why, for the love of all that is good, can't you figure out that I know have 20Mb free?
So, then I'll jump over to Podcasts, which I love, but take up lots of room on my phone. I'll delete a few of the large ones I've already listened to, easily freeing up a few HUNDRED MEGABYTES. We should be good to go, right? WRONG. The iPhone genius still tells me I don't even have enough space to eek out one lousy photo.
If I let my phone sit there long enough -- 10 minutes, 30 minutes, a few hours -- I haven't determined when the magic happens -- eventually the iPhone realizes that 'Hey, the user just deleted a bunch of junk and, wow, I'll be a son of a gun -- there IS enough space now to take a photo. iPhone -- happy!'
Thanks for nothing, iPhone. By this time, my daughter has stopped doing that amazing cute thing that I wanted to capture forever and quite possibly spawn the next generation of 'Charlie Bit Me' parodies. I freed up 500 Mb of prime photo snapping space 20 minutes ago. Thanks for finally realizing it. I realize you can only do like 170 quadrillion calculations a millisecond. I realize these things take time.
Can one of you iPhone engineers please, for goodness sake, please explain to me why this INFURIATING and seemingly unnecessary delay exists? I am no Windows fan boy but I can sure tell you that when I'm running low on hard drive space on my laptop and then delete 1GB of files, that 1GB INSTANTLY becomes available to me. I don't have to wait some interminable timeframe until it magically is usable.
One last thing that is puzzling -- so the native iPhone camera will refuse to let me take a photo because it things we're out of space (when we're not) but any third party photo app, like Camera+ or Camera Awesome, will happily snap pictures all day long. In fact, once I've taken them using one of these apps, I can then SAVE THEM TO THE CAMERA ROLL!
By the way -- when I started this well thought out rant, my iPhone said it was out of storage, and now, five minutes later -- you guessed it -- still out of storage, despite the fact that I deleted 10 photos and 4 podcasts.
So. Incredibly. Infuriating.
For you iOS 7 users, please let me know if this issue has been resolved at all with iOS 7. I've held off upgrading because iOS 7 messed up a bunch of things with the camera, at least on my wife's iPhone 5. Focus no longer works reliably -- touch to focus and touch to expose no longer work well -- the quality of photos took a big hit. I won't update until these issues have been resolved.

Thanks @pdroth. I did a quick Google search of DB indexing. I'm not sure I found exactly what you were referring to but I see where you're going with it. I can understand that indexing my database of stored photos can be time consuming. It's frustrating that the space can't be recognized as being free more quickly.
I notice that some items I delete seem to free up the space much more quickly. Removing an app entirely or deleting from my Music generally shows up as available space in Usage pretty quickly.
Deleting a photo or video from the Camera Roll will take MUCH longer, so I guess that has something to do with the indexing process you are referring to.
I'd like to point out that when I run out of space on an SD card on any budget point and click digital camera that I can quickly delete a picture or two and INSTANTLY be able to take a couple of new photos in their place. I guess I just have that same expectation for the $500+ engineering marvel I have in my hand right now.
Thanks for chiming in.

Iphone with ios6 as a remote for apple tv - song sometimes skips

I use iphone with ios6 as a remote for apple tv but sometimes a song skips while playing. What can I do to stop this? Very annoying as I'd like to use it for a party. Thx

Sure.
https://itunes.apple.com/ca/app/remote/id284417350?mt=8

TS1741 I can't get my remote on my iPhone 4s to open so I can use it for Apple TV.

I can't get my remote on my iPhone 4s to open so I can use it for Apple TV.

Try a reset, by pressing and holding the home and power buttons until the white Apple logo appears.

HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

how do you connect an iphone to be a remote for Apple TV without the apple remote?

you can use the remote app.
http://www.apple.com/apps/remote/

I bought a new iPhone and only photos from the last 30 days were transferred to my photostram on icloud. I thought icloud was the storage for all my old photos. How do I access the old photos on icloud?

I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?

janqfromnor wrote:
I bought a new iPhone 5. Only photos from the last 30 days were transferred to my photostream on iCloud. I thought iClud was the storage for all the old photos. How do I access the older photos than 30 days on iCloud?
Where, exactly, did you read anything from Apple that suggested that iCloud Photostream was permanent storage?

I have an iPhone and iPad on the same account. I gave my iPad to my daughter. Can I set up a new account for my iPhone only so I can back up photos, etc, in privacy?

I have an iPhone and iPad on the same account. I gave my iPad to my daughter. Can I set up a new account for my iPhone only so I can back up photos, etc, in privacy?

If you set up a new account on your iPhone you won't have access to all the data associated with the prior Apple ID.

How do I use my iPhone as a remote for my apple tv

I am trying to use my iPhone or iPad as a remote for my Apple TV, but on my TV screen the "add remote" option is grey and cannot be selected. Any suggestions? Thanks, Cliff

Welcome to the Apple Community.
If you have already turned on home sharing on the Apple TV, then the Apple TV should simply show up in the remote app without you having to do anything else.
Unfortunately, if you haven't yet enabled home sharing, you can only do so with the original remote and you'll need to purchase a replacement from the Apple Store.

Remote for taking iPhone 4 photos?

Similar Messages

Maybe you are looking for