Remote gateway not responding using linksys vpn client

Please i need your assistance asap
Am using this
Linksys VPN router RV042, firmware version 1.3.12.19-tm
Linksys VPN Client version 1.2.11
When i trying connecting via the VPN client on a window XP SP3 system it
goes through the process of connecting,provisioning, activating policy
and hang on verifying network. After a while a pop box comes up with ''
The remote gateway is not responding. Do you want to wait''
The RV042 shows that the client is log on and online.but the VPN client
access say The remote gateway is not responding. Do you want to wait''
see below my vpn client log
2012/07/26 16:17:55 [STATUS]OS Version: Windows XP2012/07/26 16:17:55 [STATUS]Windows Firewall is OFF2012/07/26 16:17:55 [STATUS]One network interface detected with IP address 10.54.39.592012/07/26 16:17:55 [STATUS]Connecting...2012/07/26 16:17:55 [STATUS]Connecting to remote gateway with IP address: 41.78.96.452012/07/26 16:18:10 [STATUS]Remote gateway was reached by https ...2012/07/26 16:18:10 [STATUS]Provisioning...2012/07/26 16:18:23 [STATUS]Tunnel is connected successfully.2012/07/26 16:18:23 [STATUS]Verifying Network...2012/07/26 16:18:27 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:30 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:31 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:33 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:36 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:18:59 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.2012/07/26 16:19:10 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:13 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:18 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:21 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:27 [WARNING]Failed to ping the remote VPN Router!2012/07/26 16:19:55 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.2012/07/26 16:20:03 [STATUS]Disconnecting...2012/07/26 16:20:17 [STATUS]Tunnel is disconnected successfully.
PLEASE I NEED HELP!!!!!! OR ANY OTHER OPTION TO ACCESS MY CENTRAL VPN GATEWAY
Celestine
Specstech Africa

Discussions about the WRVS4400N is now being handled by the Cisco Small Business Support Community.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Similar Messages

IOS VPN will not respond to Cisco VPN Client connections.

Hi all,
I am about to set my routers on fire here.
I have two 2921 ISRs both with Security licenses on separate leased lines. I have configured one to accept VPN connections from our Cisco VPN Client remote workers.
I have followed the set up process I used on another site with an 1841/Sec router and the same clients and I have also checked against the config given in the latest IOS15 EasyVPN guide.
With all debugs active, all I see is
038062: Dec 8 14:03:04.519: ISAKMP (0): received packet from x.y.z.z dport 500 sport 60225 Global (N) NEW SA
038063: Dec 8 14:03:04.519: ISAKMP: Created a peer struct for x.y.z.z, peer port 60225
038064: Dec 8 14:03:04.519: ISAKMP: New peer created peer = 0x3972090C peer_handle = 0x8001D881
038065: Dec 8 14:03:04.523: ISAKMP: Locking peer struct 0x3972090C, refcount 1 for crypto_isakmp_process_block
038066: Dec 8 14:03:04.523: ISAKMP:(0):Setting client config settings 3E156D70
038067: Dec 8 14:03:10.027: ISAKMP (0): received packet from x.y.z.z dport 500 sport 60225 Global (R) MM_NO_STATE
Below is the abridged config.
System image file is "flash0:c2900-universalk9-mz.SPA.154-1.T1.bin"
aaa new-model
aaa authentication login default local
aaa authentication login VPNAUTH local
aaa authorization exec default local
aaa authorization network VPN local
aaa session-id common
crypto isakmp policy 10
encr aes
authentication pre-share
group 14
crypto isakmp client configuration group VPN
key ****-****-****-****
dns 192.168.177.207 192.168.177.3
domain xxx.local
pool VPNADDRESSES
acl REVERSEROUTE
crypto ipsec transform-set HASH esp-aes esp-sha-hmac
mode tunnel
crypto ipsec profile IPSECPROFILE
set transform-set HASH
crypto dynamic-map VPN 1
set transform-set HASH
reverse-route
crypto map VPN client authentication list VPNAUTH
crypto map VPN isakmp authorization list VPN
crypto map VPN client configuration address respond
crypto map VPN 65535 ipsec-isakmp dynamic VPN
ip local pool VPNADDRESSES 172.16.198.16 172.16.198.31
ip access-list extended REVERSEROUTE
permit ip 192.168.0.0 0.0.255.255 any
permit ip 10.0.0.0 0.0.0.255 any
ip access-list extended FIREWALL
2 permit udp any host a.b.c.d eq non500-isakmp
3 permit udp any host a.b.c.d eq isakmp
4 permit ahp any host a.b.c.d
5 permit esp any host a.b.c.d
If anyone can see anything wrong, I would be so pleased and it would save the destruction of an ostensibly innocent router.
Thanks,
Paul

> I actually love you. Thank you so much.
Sorry, I'm married ... ;-)
> Im not using a virtual template. Can I get away without the Crypto Map if I use one...? All my tunnels are VTIs
oh yes, I could have seen that ...
crypto isakmp profile VPN-RA
match identity group VPN
client authentication list VPNAUTH
isakmp authorization list VPN
client configuration address respond
virtual-template 1
interface Virtual-Template1 type tunnel
description Tunnel fuer Cisco VPN-Client
ip unnumbered GigabitEthernet0/0
ip virtual-reassembly in
tunnel mode ipsec ipv4
tunnel protection ipsec profile IPSECPROFILE
Your isakmp-config and ipsec profile stays the same.

Problem accessing company resources remotely using Cisco VPN Client

I connect to my company's network remotely using Cisco VPN client both from a PC (v 4.0.1) and from a MacBook Pro (v 4.9.00)(same configs), and use Remote Desktop to connect to my work computer, and now i'm able to use Citrix to run applications on the company server.
The problem occurs on the Mac when I'm connecting from a location that uses the same private domain IP as our company's private domain. Our company's private domain is 192.168.1.x, so when I'm using the Mac on a WiFi router that happens to be set to 192.168.1.1, the Mac can connect using VPN but the remote desktop cannot connect to my work computer. Presumably, the Mac doesn't "know" that I'm trying to go through the VPN for the connection and not connect to something locally.
This problem seems to be unique to the Mac. Every Windows machine with the same client installed has no problems no matter what WiFi I've tried. The Mac works fine on any WiFi that is not 192.168.1.x.
However, since 192.168.1.x is very common (hotels, airports, etc., its a major problem with the Mac.
Suggestions are greatly appreciated!
Also, now that we're moving to Citrix, our administrator has created a webpage on the intranet that we launch applications from, but the Mac cannot find that page when connected to VPN from 192.168.1.x. Same problem.
Thanks in advance.

Hi,
I presume you have split-tunneling activated.
1. Make sure the 192.168.1.x is on the protected networks and on the MacBook client, disable "Allow local LAN access"
2. Create a separate group for the Mac users and assgn them a different pool (192.168.100.x )and advertise it in your company to point to the VPN Concentrator.
3. Use the NAT feature on your VPN concentrator.
If this helped, please rate.
Regards,
Daniel

Cannot connect to work using Nortel Vpn Client

Hi Guys,
I have a linksys router at home and I am unable to connect to work using the Nortel VPN Client, it works intermittently.. sometimes it connects but most of the time it comes back with an error saying " Login Failure: remote host not responding"
But when i ping the FQDN of my company's vpn box I get a successfull reply, I did a small test and connected to a random wi-fi connection near my house and after I was connected to that I was able to use my vpn client to connect and connect to work so there has to be something wrong with the linksys router settings I have.
I tried logging on to the admin page of the router by going to 192.168.1.1 and under the security tab under vpn I enabled all the protocols for thr VPN passthorough but the problem still persists.. any ideas??
Thanks in advance
A

Set the MTU to 1500
uncheck Filter Internet Request.
turn off any third party firewall.
Yesterday is history. Tomorrow is mystery. Today is a gift.

TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding

TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
GigabitEthernet0/0         10.4.3.1        YES NVRAM down                  down
GigabitEthernet0/1         10.12.10.26     YES NVRAM up                    up
Serial0/2/0                unassigned      YES NVRAM down                  down
Serial0/2/0.602            10.12.15.10     YES NVRAM down                  down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.

You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS?

ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro

Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.

Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh

Tunneling using Cisco VPN Client 4.9

Hello,
in recent times I used the Cisco VPN Client 4.7 with no problems:
1. I installed the software
2. I started "Internet Connect.app", created a VPN connection (PPTP) with no entries
3. created a new network connection ("Tunnel to company"), with ETH and VPN (PPTP) enabled
4. the ethernet interface points at the local router wich is connected to my ISP
5. DHCP-Client-ID: our.company.de, DNS-Server: no entry, Domain-Names: our.company.de
6. Proxies: our companies proxies
7. the VPN (PPTP) interface is configuered as PPP, DNS-Server: our companies server IPs, Domain-Names: no entries, Proxy: no entries
8. Starting the Cisco VPN Client I configuered an new session, connected, ok
As said, this was in the old days.
Now using Cisco VPN Client 4.9 on a MacBookPro (Intel) this works also with one exception:
I can establish a network connection (ping, smb, AFP, intranet/HTTP) only using the companies fully qualified domain name, e.g.:
1. ping server1: unable to resolve name
2. ping server1.our.company.de: works as exspected
I am using Cisco VPN Client 4.9.00 (0050), Mac OS X 4.8 with all available updates.
Any help would be appreciated
Roland

...
trying the same (without the "Internet Config.app" / VPN PPTP) using VPN Tracker works fine. But I don´t want to spend Euro 79.-...
Roland

Upgraded to Lion and now getting error 51 when trying to use Cisco VPN Client.

Mac mini with Snow Leopard not having same issue, VPN client works fine. What happened?

Try uninstalling then reinstalling the Cisco software. Cisco VPN may not be compatible with Lion. Check with them about compatibility or upgrade.

Linksys VPN client for MAC

I can't find any information on it. Anyone know where I can download the client for it?

hi...there is no linksys vpn client for the MAC OS

WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

Hi folks -
I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
My wife has a VPN client for her work, on her laptop. It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
My WRVS4400N is running 1.1.03 firmware, latest on the site. I have all VPN pass-throughs enabled. VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
The problem is, that I have logging turned on with email alerts. When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information. It's almost like there is a bug in the router firmware that is parsing information incorrectly.
Log levels are set to 0,1,2,3. Email alerts enabled. DoS threshold is 50, Log Queue is 100, Log Time is 60. SMTP information for my mail server populated of course, and Local Log enabled.
Below is a sample of the email body that gets sent. My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
Here's some body content:
Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
Does anyone have any ideas? This seems like a code bug to me, but how do I go about reporting to Linksys?
Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
Any help would be appreciated!
Thanks,
Jesse T.

hay,
Nobody can test this?
nobody has a 5520?

6500 IOS HSRP Gateway not responding to ARP requests

WS-C6509, running Native IOS version 12.2(33)SXH4. Pair of 6500 configured with HSRP serving as Gateway to down stream clients
Ping requests from clients not having a Default Gateway (AIX Server Team recommendation) failing.
Packet capture show ARP requests being received by Gateway 6500, but Gateway will not respond for up to 30 seconds at which point ping requests will start working. But after a period of inactivity, the cycle starts over again - 30 second delay before traffic starts flowing.
Having a Default Gateway is a separate discussion. I'm just interested in being able to provide technical reason why this is occuring.
Anyone experience this?
Any suggestions for addtional troubleshooting measures?
Thanks in advance.

Looks to me like a timer problem - maybe a ARP timer on the clients? Check the ARP tables of your clients during your tests.
HTH

Using 2 VPN clients

I have an Apani VPN client for work and want to install a CISCO VPN client for another job. When I try to connect using CISCO, I get an error message saying my other VPN is interfering with the connection. I have tried putting CISCO under a different mac user but no luck.

Hi,
I'm guessing you need to Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
One for each.

Mx860 won't print. printer not responding using usb cable.

MX860 was working fine. Now any attempt to print from any pc, either wirelessly or even using high-speed USB cable results in "printer not responding" error message. Any ideas?
Thanks.

Yes my friend I am from Iraq and I work in the field of sale and maintenance of printers canon inkjet only five years ago
Now first of all clear the software for printers that are on your computer
I mean that you delete programs and printers
Now unplug all printers that you have from your computer
Restart the computer
Now Put your installation disk in the drive
Or download the installation program for the printer from Canon site
On the following link
http://gdlp01.c-wss.com/gds/0/0100004630/01/md86-win-mx860-1_03-ea24.exe
Do not you connect the printer to ask you after the program installation so ................
After connecting the printer to complete the installation and the final outcome please tell us if you need any photo caption or any question about your information please kindly asking
Said to provide information to you
Thank you

Using Cisco VPN client certificate for built in IPSec?

Hi,
Does anybody know if it is possible to "convert" a certificate exported from Cisco VPN client and import it into the Keychain for using it with built-in IPSec in Snow Leopard?
Thanks,
Oli

I too am having trouble importing the Cisco certificate. It would be nice for some clear documentation. We've been successful converting the x.509 cer to KPCS#7 using openssl which will import into the keychain. However, the VPN (Cisco IPSec) sill doesn't see it.

Writing a file to a remote location (not KM) using WD

Hello everyone.
I've encountred a scenario in which I need to upload an excel file to a km file and also load it into the sap system.
I've managed to upload the file to the KM Server, but not I have a new problem:
The abap function that loads the excel file into an Internal table (ASLM_EXCEL_TO_INTERNAL_TABLE), works on a local location.
I cant supply the the function with the KM address, since the KM Server is firewalled and not every user which will work with my application will have access to it.
However, I have another server - the SAP server which has an interface which every user can access, so I've come up with an idea - I still have the inputstream of the file which I wrote to the km server, and I will write it to another server, for example - 212.101.42.21\interface\my_folder and then I will supply the abap function with this location.
Is this possible? if so, how can I use web dynpro to write to this server?
thanks for any help,
Eli Erenburg.

Hi,
Yes it will be possible.
Java Classes help you write files to servers. Have a look at:
http://www.java2s.com/Code/Java/File-Input-Output/UseNewJavaIOtowritestringintoafile.htm
You can reuse the solution inside a bean and then expose that as a web service - finally consuming it in Web Dynpro Java. It may directly be reused in WDJ as well (as part of a method) - but then again that would be a design call.
Hope that the link helps. I have used it to write local files to server.
Thanks.
p256960.

Remote gateway not responding using linksys vpn client

Similar Messages

Maybe you are looking for