Remote infrared codes for the Sony STR-DE675 receiver
Where can I find the remote infrared codes for the Sony STR-DE675 receiver? They are not in the Owner's Manual, nor on the Sony.com website. Thanks.GBP
If you were getting sound and no picture when you had the Wii hooked up to your surround sound receiver, your TV was probably on the wrong input. You would have needed to use the source or input button on your TV's remote and changed the input to the component 1 choice, since that is the port you stated you plugged the Wii into on the TV.
Your cable remote may not be programmed to work with the blu-ray player. However, I think you're misunderstanding the function of the buttons at the top of your remote labeled TV, Sat/Cab, VCR, etc. Your cable remote doesn't work like a Harmony remote. Pushing those buttons at the top of your cable remote are not like pushing the Watch TV or Watch DVD functions on a Harmony (meaning pushing them doesn't change the TV's input automatically). All those buttons at the top of the remote are for that you're describing are to tell the remote which components to control. For example, you are watching cable TV and just used the remote to change the channel but now you want to adjust the volume. You would have to hit the "TV" button on the cable remote to switch the remote from controlling the cable box to controlling the TV. Otherwise, you'd hit the volume controls over and over and nothing would happen b/c the remote would still think it was controlling the cable box. Only a Harmony remote (or similar universal remote) can change the TV's input with the click of a function button.
And to explain why one must change the TV's input when switching components, I always compare the process to the way a tube TV used to work for those that are new to the flat screen TVs. Think of the way your old TV probably worked - you had to have the TV on channel 3 for your VCR, 4 for cable, etc. The input changing is practically the same thing with just a few more steps, if that helps to make things any clearer. LOL
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!
Similar Messages
-
What is STB Remote Control code for the Magnavox 15MF400T/37 set?
Does anyone know or know where to find the correct remote control code for the 15MF400T/37 set?
If none of the codes worked, your only other option is to do a scan.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the
TV
key in step 2 and 3.)
1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK
4. Release both keys. The Device Keys will blink twice.
5. Press 9 - 2 - 2
6. Point the remote at the TV.
7. Press the play button
8. Press FF button . Every time you press the FF button the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off.
9. When the TV turns off, you have found the right code. Press OK to store this code.
Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press FF over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing EXIT
If you do this and it still doesnt work, then your tv and the verizon remote dont have a common code and it will not work with your tv.
====================================================================================
Error exists between keyboard and chair. -
I entered the correct download code for "THE HOST" but instead got a copy of "SPRING BREAKERS"! All of the prompts identified it as "The Host" but the final product was "Spring Breakers"! I called a friend who has a copy of that movie and the download codes are not even remotely alike!! How can I correct this error? I 'd rather have SyFy that a bubblegum teenager flick!! HELP ME, PLEASE?!
Hello Old Dogg new tricks,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario -
HEX Codes for the Apple Remote
Hallo,
does anyone know the HEX codes for the Apple Remote, so I can connect it with my universal remote control?
Dominikyou can train any remote to control the apple tv.
on the appletv navigate to settings>General>Remotes>learn Remote
handy little feature -
Has anyone one else had problems redeeming the code for the free onetime download of the Star Trek 2009 Movie?
dawnfromcabot wrote:
ITUNES HAS CHARGED MY DEBIT CARD $99.99 FOR GLOBAL WAR RIOT-SOME GAME I DID NOT KNOW WAS LOADED ON MY OTHER PHONE; HOWEVER, WHEN I PULLED UP THIS APP TO SEE EXACTLY WHAT IT WAS WAS I SURPRISED TO SEE I COULD DOWNLOAD IT FOR 'FREE'. I HAVE CONTACTED ITUNES THROUGH THIS REDICULOUSLY CHICKEN SH_T SYSTEM THEY USE SO THEY DO NOT ACTUALLY HAVE TO HEAR HOW UPSET A PERSON IS NOW THAT THEY CANNOT BUY FOOD FOR THEIR CHILDREN BECAUSE OF A MISTAKE MADE ON ITUNES PART. I DID RECEIVE AN EMAILED RESPONSE FROM STEPHANIE WHO ADVISED THIS WAS PUCHARED ON A PHONE THAT HAS PURCHASED DOWNLOADS IN THE PAST. I WONDER IF SHE THOUGHT TO LOOK AT MY ENTIRE DOWNLOAD HISTORY AND DISCOVER THAT NOTHING HAS EVER BEEN PURCHASED ON MY ITUNE ACCOUNT IN THE AMOUNT REMOTELY CLOSE TO WHAT THEY ARE CHARGING ME NOW. THAT IS BECAUSE I DO TRY TO MONITOR THIS ACCOUNT AND OBVIOUSLY THIS LAST PURCHASE WAS DONE WITHOUT MY KNOWLEDGE UNTIL I CHECKED MY ONLINE BANKING ACCOUNT, WHICH I DO EVERY DAY. TO MAKE MATTERS WORSE THE APP STATES IT IS FREE TO INSTALL WHEN YOU PULL IT UP SO NO ONE HAS CLARIFIED TO MY WHERE THE $99.99 COMES INTO PLAY. I WILL NOT DROP THIS UNTIL MY BACK ACCOUNT HAS BEEN PROPERERLY CREDITED IN THE SAME TIME FRAME IT TOOK YOU TO TAKE MY MONEY. I WILL LAUNCH A COMPLAINT WITH EVERY POSSIBLE ENTITY IN THE ITUNES COMPANY AND BUSINESSES OUTSIDE THAT REGULATE THEIR BUSINESS UNTIL THIS HAS RESOLVED IN MY FAVOR AS I AM THE ONE WHO HAS BEEN VICTIMIZED BY A COMPANY I INVITED INTO MY TELEPHONE NETWORK IN GOOD FAITH!!!!!!!!!!!!
Reading that is giving me a headache, how about normal type. -
I am trying to find a power supply for the sony DRX-720 DVD/CD AND THE PRICE
I am trying to find a power adapter for the sony DRX-720UL DVD/CD Rewritable Drive and the cost?
All product support for CD/DVD drive, tape backup, or magneto-optical drive peripherals, including repair status, is available from Storage by Sony.
NOTE: Contact and other information can be found on the Storage by Sony Web site at http://www.storagebysony.com/
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K -
ABAP Routine code for the below logic
Hello BW Experts ,
I need to write a complex ABAP routine in BW .
Following is the detail explaination .
Can anyone tell me the ABAP code for the below logic?
It would be a greate help as I am unable to do this
since last two days.
WBS Elements are maintained at IOS and Warranty levels in R/3 side.
The IOS WBS is a top level of WBS element and below that the Warranty WBS level.
The IOS and Warranty WBS elements can be differentiated by means of priority field.
When priority = i , WBS Element is known as IOS Level WBS Element and
When priority = Y the WBS element is known as Warranty WBS element.
The Equipment Number is maintained compulsorily at IOS Level WBS elements only.
It is not maintained at Warranty WBS Element.
But the Cost is maintained at Warranty WBS Elements.
In BW I need all Warranty WBS ( priority = Y) along with their cost figures and Equipment Numbers.
But as the Equipment Number is not maintained compulsorily at Warranty WBS level we have asked to
Copy it from IOS WBS ( priority = i ) and assign it to Warranty WBS level ( priority = Y ).
So I have included the Equipment Number in the ODS and in update rules I need to write the routine for it as
per the above logic.
The Equipment Number is coming from Master data of WBS Element.
The WBS element master data we are loading in BW .
Also the same WBS Element transaction data is coming from the transaction data data source in BW.
Following fields / infoobjects and the table names in BW :
1. Equipment Number : /BIC/ZEQUIPMNT and table name /BIC/MZWBS_ELEM.
2. WBS Element : ZWBS_ELEM is coming from transaction data data source as well as master data.
In ODS update rules it is coming from transaction data data source Comm_structure-ZWBS_ELEM.
Also we are loading separetly the master data for ZWBS_ELEM.
The ZEQUIPMNT is an attribute of ZWBS_ELEM.
3. Priority : PRIORITY and table name /BIC/MZWBS_ELEM.
The info object name for Priority is 0Priority but in master data table /BIC/MZWBS_ELEM
the field name is PRIORITY.
When PRIORITY = ' i ' then ZWBS_ELEM is at IOS Level
When PRIORITY = ' y ' then ZWBS_ELEM is at Warranty Level.
4. ODS name : /BIC/AZCOST00 and same is table name active data table .
So please tell me the routine Code .
Best Regards ,
Amol.Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
Getting Error In the Routine - While writing Code for the Cross Reference.
Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
InfoObject: 0LOGSYS.
LOGSYS TYPE RSDLOGSYS,
InfoObject: ZPRJ3.
/BIC/ZPRJ3 TYPE /BIC/OIZPRJ3,
InfoObject: ZDOM3.
/BIC/ZDOM3 TYPE /BIC/OIZDOM3,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in AdvanceI have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name> -
I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
JeyanHi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer -
My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!
If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig -
Provide the java code for the following scenario.
Hi Experts,
I have tried with all the combinations for this scenario. As per my understanding i require java code for the following scenario
so that it becomes easy........
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Kindly provide the java code.
Thanq very much in advance..what i have understood from ur example is that u want to generate an idoc for unique combination of Order-no and Mat_No
if yes then chk the below mapping..
change the context of Order_No, Date, Mat_No and Quantity to Record (right click-> context)
1)
Order-no
----------------------concat[;]---sort----splitbyvalue(valuechanged)-----collapse context---IDoc
Mat_No
2)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context---UDF1--splitbyvalue(each value)--Delivery_Order_No
Mat_No
3)
Order-no
-----------concat[;]---sortbykey----------------------- \
Mat_No / \
Date--------------- / \
----------------------------------------------------------FormatByExample-----collapsecontext---splitbyvalue(each value)----Recv_Date
Order-no /
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
4)
Order-no
--------concat[;]---sort----splitbyvalue(value changed)---collapse context-UDF2--splitbyvalue(each value)--Material_Num
Mat_No
5)
Order-no
-----------concat[;]---sortbykey
Mat_No /
Quantity --------------- /
----------------------------------------------------------FormatByExample-----SUM(under statistic)----Recv_Quantity
Order-no
-----------concat[;]---sort----splitbyvalue(value changed)
Mat_No
UDF1:
String [] temp= a.split(";");
return temp[0];
UDF2:
String [] temp= a.split(";");
return temp[1]; -
Creating Java code for the function module
Hi Colleagues,
I have a fuction module in ABAP system. Now I want to Generate java code for the FM.
I cam to know that we can achive that using AXIS, By getting the XML file for the fuction module and generate Java
Class file using that XML file.
Can any one tell me how to achive it.
Or any other way to do that?
Please provide you valid suggestions.
Regards,
SathyaHi,
You can integrate axis2 in eclipse. I think you have to find the plugin for that.
After that you can let axis generate the jave code (stubs and proxies) for your web service via the wsdl file.
Kind Regards,
Robin -
Here the SSCCE code for the prvious problem posted by me.
Following is the SSCCE code for the program of search which is having the problem i have asked before.
here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
the problem is the same that firstly i want to make the panel invisible.
(the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.*;
public class Temp extends JFrame implements ActionListener
Container c;
Toolkit tk;
JLabel l1; int y=30;
JPanel p1,p2,p3;
JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
JButton btSearch,btView;
ButtonGroup bgSearch;
JTextField txtSearch; BoxLayout boxl;
ImageIcon i1;JScrollPane sp1;JViewport vp;
public Temp()
super("Search-Address Management System");
c=getContentPane();
tk=Toolkit.getDefaultToolkit();
setSize(1024,768);
c.setBackground(Color.BLUE);c.setLayout(null);
setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
defineComponents();
settingBounds();
addListeners();
addComponents();
setVisible(true);
public void defineComponents()
p1=new JPanel();
p1.setLayout(null);
p1.setOpaque(false);
p2=new JPanel();
p2.setLayout(null);
p2.setOpaque(false);
p3=new JPanel();
boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
p3.setLayout(boxl);
rbByName=new JRadioButton("First Name");
rbByName.setOpaque(false);
rbBySirName=new JRadioButton("Last Name");
rbBySirName.setOpaque(false);
rbByState=new JRadioButton("State");
rbByState.setOpaque(false);
rbByCity=new JRadioButton("City");
rbByCity.setOpaque(false);
rbByID=new JRadioButton("ID");
rbByID.setOpaque(false);
btSearch=new JButton("Search");
bgSearch=new ButtonGroup();
txtSearch=new JTextField();
btSearch=new JButton("Search");
TitledBorder tb=new TitledBorder("Search Criteria");
TitledBorder tb1=new TitledBorder("Search");
p1.setBorder(tb);
p2.setBorder(tb1);
public void settingBounds()
rbByID.setBounds(20,30,50,20);
rbByName.setBounds(120,30,100,20);
rbByState.setBounds(20,70,80,20);
rbByCity.setBounds(120,70,50,20);
rbBySirName.setBounds(240,30,100,20);
p1.setBounds(30,40,400,110);
p2.setBounds(30,180,400,80);
p3.setBackground(Color.ORANGE);
txtSearch.setBounds(50,210,250,25);
btSearch.setBounds(320,210,80,25);
rbByID.setSelected(true);
public void addListeners()
btSearch.addActionListener(this);
public void addComponents()
p1.add(rbByName);
p1.add(rbBySirName);
p1.add(rbByState);
p1.add(rbByCity);
p1.add(rbByID);
c.add(txtSearch);
c.add(btSearch);
c.add(p1);
c.add(p2);
bgSearch.add(rbByID);
bgSearch.add(rbByName);
bgSearch.add(rbBySirName);
bgSearch.add(rbByCity);
bgSearch.add(rbByState);
public void drawtable()
JTable t1=new JTable()
public Class getColumnClass(int column)
return getValueAt(0, column).getClass();
if(y==30) //as temporay variable only to add the scrollpane once
sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
sp1.setBounds(30,300,660,380);
c.add(sp1);
JScrollPane sp=new JScrollPane(t1);
sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
sp.setMaximumSize(new Dimension(600,100));
p3.add(Box.createRigidArea(new Dimension(600,20)));// invisible filler to add space between two tables
p3.add(sp);
p3.revalidate();
y=y+110;
public void actionPerformed(ActionEvent e)
if(e.getSource()==btSearch)
drawtable();
public static void main(String args[])
new Temp();
}Please reply with the code required to be added.the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
You have a structure something like this:
main panel
- scroll pane
- viewport
- table panel
- table1
- table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested. -
Streamlining the code for the button group with individual links and rollover imgs
I am looking for a solution to streamline the code for the array of 20+ buttons located inside the scroll pane.
I know I can make an array if all the buttons would have a unified code executable change, i.e. they would become larger and brighter.
My problem is that each button represents an product image in the lights off stage, then of rollover it is a lights on stage so I have to import two images in the on and off stage and play around with the opacity.
Additional problem is that each button has to ling to a different label.
My question is: is it possible to unify the code if buttons have that much individuality or I have to make each one of them as in the example below.
// makes a hand cursor appear over a mc acting as a button for all the buttons inside the scrollpnaeBckgrnd_mc.scrollpaneBckgrnd_btns_mc.
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.buttonMode = true;
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.useHandCursor = true;
///////////////INDIVIDUAL BUTTONS
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLyte _btn.FloraLyte_ON.alpha = 0;
var FloraLyte_btn_Tween:TweenLite = TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.F loraLyte_btn.FloraLyte_ON, .5, {alpha:1, paused:true});
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLyte_btn.addEventListener(MouseEvent.ROLL_OVER, overHandler_FloraLyte_btn);
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLyte_btn.addEventListener(MouseEvent.ROLL_OUT, outHandler_FloraLyte_btn);
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLyte_btn. addEventListener(MouseEvent.CLICK, onClick_floralytePopUp);
function onClick_floralytePopUp(event:MouseEvent) :void {
gotoAndPlay("floralytepp");
function overHandler_FloraLyte_btn(e:MouseEvent):void{
FloraLyte_btn_Tween.play();
trace("you rolled over me");
function outHandler_FloraLyte_btn(e:MouseEvent):void{
FloraLyte_btn_Tween.reverse();
trace("you rolled off me");
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLytell_btn .FloraLytell_ON.alpha = 0;
var myTween:TweenLite = TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.F loraLytell_btn.FloraLytell_ON, .5, {alpha:1, paused:true});
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLytell_btn.addEventListener(MouseEvent.ROLL_OVER, overHandler);
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.Flor aLytell_btn.addEventListener(MouseEvent.ROLL_OUT, outHandler);
MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.scrollpaneBckgrnd_btns_mc.FloraLytell_bt n.addEventListener(MouseEvent.CLICK, onClick_floralytellPopUp);
function onClick_floralytellPopUp(event:MouseEvent) :void {
gotoAndPlay("floralyte2pp");
function overHandler(e:MouseEvent):void{
myTween.play();
trace("you rolled over me");
function outHandler(e:MouseEvent):void{
myTween.reverse();
trace("you rolled off me");as ned suggested, plan your flow and code into it. here is one example:
var buttonArray = [someButton, someOtherButton, aDifferentButton];
for(var i = 0; i < buttonArray.length; i++){
//get reference to county movieclip
var mc = buttonArray[i];
//then add listeners
mc.addEventListener(MouseEvent.ROLL_OVER, overMe);
function overMe(e:MouseEvent){
var mc = e.target;
switch(mc){
case: someButton:
someOtherButton: doThis();
break;
case: aDifferentButton: doThat();
break;
default: //do nothing;
break;
function doThis(){
trace("do this")
function doThat(){
trace("do that") -
USER COMMAND CODE for the ICON "Back"
Hello All,
I wanted to know if there is any command code for the user-command icon "back" that i can use while programming.
e.g. as for the icon "save" there is '&data_save' code which we can use.
I have used the code "&F03" for 'back" but it does not call the routine i have written for the same.
So if in case no other code for "Back" icon is available, what is the procedure to implement the "back" command through programming?
as when i click the icon,the code written inside the report should be executed along with the normal "back" function.
ThanksHi..
you do one thing..put /h. then click on back.At the bottom pART of the debugging screen u find
Field names section..There type sy-ucomm and press enter. The value of sy-ucomm can be seen...
Thats the value u need...Which u can use the same in case statement
and its case sensitive.chk the same.. and write it in quotes( ''). that is 'BACK' or 'F03'
Edited by: Rudra Prasanna Mohapatra on Jun 21, 2008 7:48 AM
Maybe you are looking for
-
My old computer is running FCPX in Mountain Lion. My new computer is running FCPX in Mavericks. How do I migrate an event and an associated project from the Mountain Lion computer to the one running Mavericks? I have copied the event and project onto
-
Touchsmart 610 - installing windows 8 on a partition, error, not enough space on system partition?
I created a 150 gb partition to install Windows 8 so I could dual boot Win 7 and Win 8. When I try to install I get a message that there is not enough free space on my 'system' partition. The only thing I can think of is that it is referring to the
-
Dock adapter for 30gb ipod video
hi all the dock adapter i recieved in the ipod box, my ipod does not sit snug in it. can anyone help me or wat to suggest?? thanks
-
Has anyone else put in for the Mountain Lion upgrade and not received a reply from apple
Has anyone else gone through the update to Mountain Lion site and not heard from apple?
-
I've installed the ImageMagick or LRMogrify plug-in, but where is it and how do I use it?
So the title basically explains my question - I've done the install, but I don't know what to do next. Thanks for any and all help!