'Remote Insight Board Interface Error' - Rogger Server

HP monitoring software on the system has detected the following event only once for our Rogger Side B Server:
SNMP Trap: 9006
Date time: 09/22/2010 01:35:07 AM
Computer: CALROG02
Source: Server Agents
Type: Error
Category: (4)
Description:
A 'Remote Insight Board Interface Error' trap signifies that the
Compaq Remote Insight Board has detected a controller interface error.
Details:
None
Is this going to affect our services / Cisco application or it can be ignored, Since the system has detected only once.
Many thanks,
Srini

I can't think of any more obvious things that could be wrong. The best thing to try next is to set up a trace between the portal and the AWS using a tool like TCPTrace to see what the exact error coming back from the AWS is.
You should also probably open a ticket with support.

Similar Messages

BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above, please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DCOM Interface Error

I have created the SAP service from the following path:
cmd:
D:\usr\sap\DM0\SCS00\exe>sapstartsrv.exe <Press Enter>
Enter following values:
SID = DM0
NR = 01
Startprofile = D:\usr\sap\DM0\SYS\profile\START_DVEBMGS01_sapserver
User = SAPSERVER\Administrator
password = india123
Press OK button.
Now SAPDM0_01 Service gets displayed in the services.msc.
Note : I have doubt in the path(D:\usr\sap\DM0\SCS00\exe) I have selected while creating SAP Service. Please correct me if i am wrong.
In SAP Management Console,
Added Plugin.
DM0 sapserver 00
DM0 sapserver 01
Right-click on DM0 ---> All Tasks ---> Start.
Error Message Popup :
Cannot connect to SAP Service on sapserver.
WebService error :20
Unknown error
DCOM Interface error : 80080005
Server execution failed.
When tried to Start SAP server from cmd,
D:\usr\sap\DM0\SCS00\exe>sapstart.exe pf=D:\usr\sap\DM0\SYS\profile\START_DVEBMG
S01_sapserver name=DM0 nr=00 SAPDIAHOST=sapserver
Start service SAPDM0_00 on machine
sapserver
Service start pending
Service SAPDM0_00 not started:
Current State: 2
Exit Code: 0
Service Specific Exit Code: 0
Check Point: 0
Wait Hint: 0
Cannot connect to DCOM Interface of Start Service: -2146959355
Please guide me to resolve the issue.
Thanks in Advance.

Hi Shitij,
Thanks for your reply.
The issue remains the same even after re-registering the service.
While Installing and registering the Service, the following error appears:
Error: Service not started.
While starting the service from SAP Management Console, the following error also appears:
Error:
Cannot connect to SAP Serviceon sapserver.
Web Service error : 20
Unknown error.
DCOM Interface error : 80040154
Class not registered.
Please guide me to resolve the issue.
Edited by: Sathya Kala Veeraraj on May 6, 2010 4:55 PM

SQL 2008 R2 error: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

after some year work with SQL server 2005,i decide change to SQL server 2008 R2.
When i completed install SQL 2008 R2,i can't connected to SQL server due to this following error
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
And when i click to technical details,i take some thing like this
===================================
Cannot connect to HUY-PC\SQLEXPRESS.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Error Number: -1
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Please!!!Some body help me solve this problem(except format my computer),i really really need your advice.

Hi huydaibang,
The older version SQL Server 2005 could be installed with SQL Server 2008 R2 side-by-side. It could not be the problem.
The reason that we get this error message is the client stack could not receive SSRP response UDP packet from SQL Browser.
Here are the steps:
1) Make sure your server name is correct, e.g., no typo on the name.
2) Make sure your instance name is correct and there is actually such an instance on your target machine.
3) Make sure the server machine is reachable, e.g, DNS can be resolve correctly, you are able to ping the server (not always true).
4) Make sure SQL Browser service is running on the server.
5) If firewall is enabled on the server, you need to put sqlbrowser.exe and/or UDP port 1434 into exception.
For more information, please refer to
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Intermitten error - SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

Problem: I have a 2 WFE & 1 App server in my SharePoint 2013 Enterprise Edition SharePoint farm. My WFE 2 and App servers connect all the time to the SQL Server using a SQL alias. My WFE1 server work 80% of the
time. It is setup exactly like WFE2 except periodically 1 web app/site collection will stop working and throw the following error:
"A network-related or instance-specific error occurred while establishing a
connection to SQL Server. The server was not found or was not accessible. Verify
that the instance name is correct and that SQL Server is configured to allow
remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)"
When I log into WFE1 I can connect to SQL using the alias using a udl file and telnet to verify the SQL alias is connected.
Hypothesis/guess: It appears like WFE1 periodically looses networking but only for 1 specific site collection.
Any ideas are most welcome?

Hi Aries,
I can rule out SQL Server (AOAG) Always-on as the farm doesn't use it.
"max worker threads" is set to 512 with 4CPU's. Rule out.
From the log and looking at the breakdown of the SharePoint request, the request is hitting the WFE2 server which in turn is trying to connect to the content database. The connection string/instance is not available. In summary, I believe the
issue is WFE2 periodically cannot connect to the SQL instance. At the same time WFE1 is working so we know it isn't the SQL server. WFE1 & WFE 2 are on the same VLAN and both appear connected and can see the SQL database using a udl file.
WFE2 has other web applications that are working while the erring web site fails. An IIS reset fixes the issue and restarting the "App pool" for the offending IIS website also fixes the problem. This tells me the issue
is the IIS process. When it tries to connect to SQL /the content database it fails.
I already raised the ticket with MS , the engineer has been looking at it with me, we have tried to identify the issue and also looked at TCP Chimney offload being a possible issue. As my servers is Windows Server 2012, all the servers have the default
"TCP Chimney Offload" setting set to "disabled". WFE1, WFE2, APP1 and SQL have the same setting so this is not the issue. At least this has been ruled out.
http://support.microsoft.com/kb/951037
http://blogs.msdn.com/b/psssql/archive/2008/10/01/windows-scalable-networking-pack-possible-performance-and-concurrency-impacts-to-sql-server-workloads.aspx
I will keep posting about the problem, hopefully MS support can escalate and the root cause can be determined.
"The bottleneck is on the WFE2 server process trying to communicate with SQL. SQL is up and listening. Only 1 of the website/WebApplication on WFE fail for 15-20 minutes while the other websites are fine."

Lync SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

Dear all,
I'm getting an error when I want to publish my Lync Topology. Thanks in advance.
error:
Error: A network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server is
configured to allow remote connections. (provider: SQL Network Interfaces,
error: 26 - Error Locating Server/Instance Specified)

Hi,
Would you please elaborate your Lync server environment?
Did the FE server and BE server on different subnets? If so, please try to relocate the SQL server in the same subnet as FE server and then check again.
Please also double check if the step of “Prepare first Standard Edition Server” ran succeed, if not please run again.
Here is a blog may help you:
http://terenceluk.blogspot.com/2011/05/publishing-lync-server-2010-standard.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software
or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

Getting "The remote server returned an error 503 server unavailable" in azure web jobs

I have created one web
job - on demand schedule under azure web site. This web jobs contains .execmd(i.e.)
Console Application.
I am retrieving the data from SQL Azure database and uploaded the data in sharepoint online lists. (i.e.)I have uploaded the data to several(7) lists in each subsites. I have 3 subsites.
I am getting this error "The remote server returned an error 503 server unavailable", while uploaded the data into lists.
Full Error Message:
Message - The remote server returned an error 503 server unavailable.
StackTrace - at System.Net.HttpWebRequest.GetResponse()
> cc525c: INFO] at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
This is not occur every time. Some time i didn't get any error data successfully uploaded in share point online list.
Totally 4 hours taken uploaded the data into list for completed all 3 subsites.
If anyone know how to resolve this.
Thanks,
A.Ramu

Hi,
Per my understanding, there is an issue when uploading data from SQL Azure database to a SharePoint list in Online environment.
For narrowing down the issue, I suggest you create a Console Application in Visual Studio without accessing the SQL Azure database and upload some sample data to the same SharePoint
list to see if the issue still occurs intermittently.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

The remote server returned an error: (503) Server Unavailable in search service

Hi
I got this error message: when applying toplogy to search service
I am applying admin component : SPINDEX Server
crawl component-0 to : same index server spindex server
in sharepoint farm has
1 applicationserver
1 index server
1 wfe server
1 db server
I prepared like this try to configure search service on index server
Microsoft.Office.Server.Search.Administration.SearchConfigWizard+SearchConfigWizardException: Topology provisioning failed due to an error.Object reference not set to an instance of an object. at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.WaitForTopologyTimerJobToFinish()
at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.UpdateSearchApp() at Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication() at Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
in the event viewer I get this error
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e8ab042b-f884-4957-b328-631ba8bcb4a1).
Reason: The remote server returned an error: (503) Server Unavailable.
Technical Support Details:
System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
adil

Hi
when i set crawl component,administration component to local computer search service working properly
but when i scale out search service application
change above components to diffrent server i get following error
Errors were encountered during the
configuration of the Search Service Application.
Microsoft.Office.Server.Search.Administration.SearchConfigWizard+SearchConfigWizardException:
Topology provisioning failed due to an error.Object reference not set to an
instance of an object. at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.WaitForTopologyTimerJobToFinish()
at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.UpdateSearchApp()
at
Microsoft.Office.Server.Search.Administration.SearchConfigWizard.ProvisionSearchServiceApplication()
at
Microsoft.Office.Server.Search.Administration.SearchConfigurationJobDefinition.ExecuteTimerJob()
3/23/2014
10:32:20 AM
and in event viewer
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e8ab042b-f884-4957-b328-631ba8bcb4a1).
Reason: The remote server returned an error: (503) Server Unavailable.
Technical Support Details:
System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
adil

The remote server returned an error: (503) Server Unavailable In SharePoint 2010.

I created a web app with claims based authentication ,
basiclly i follwe this blog
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
but when i login it throws 503 error
Server Error in '/' Application.
The remote server returned an error: (503) Server Unavailable.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The remote server returned an error: (503) Server Unavailable.]
System.Net.HttpWebRequest.GetResponse() +1126
System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +81
[ServerTooBusyException: The HTTP service located at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is too busy. ]
System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) +10258154
System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) +539
Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message) +0
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) +61
Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) +36
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo) +26062081
Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLogin() +270
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.GetSecurityTokenFromWindowsIdentity(WindowsIdentity windowsIdentity, HttpContext httpContext) +21
Microsoft.SharePoint.IdentityModel.SPWindowsClaimsAuthenticationHttpModule.AuthenticateRequest(Object sender, EventArgs e) +1176
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
any thoughts?
thanks in advance!
Share Knowledge and Spread Love!

Hi ,
I was also facing the same issue on changing my credentials. This effects the ServiceTokenApplicationPool and other pools related to the Web applications
To resolve this follow these :
1. Open IIS Manager , under Connection section you can see the Name of your site collection(as
siteCollectionName(Username))
2. Open SiteCollection , select Application Pools. A new window with your Web application pool names would open.
3. Right click on web app, select Advance Setting... , under Process Model select Identity
4. check for Custom account , click set and enter your Credentials and click
OK
Atlast Refresh the IIS manager.
Thank you.
Under application pools Do select the ServiceTokenApplicationPool also and follow steps 3 and 4

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have unin

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have uninstalled and re-installed PS CC. I have opened holding down shift to disable third party plug-ins. I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help. It worked once, and only once and now won't work at all.

Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Dash Board in BO pord server is showing error

HI Expert,
               While i open my dash board in BO production server it showing me error
"A database error occured. The database error text is: Unable to connect to SAP BW server SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=172.16.5.44, GWSERV=sapgw00, ASHOST=172.16.5.44, SYSNR=00
LOCATION    SAP-Gateway on host pagebip / sapgw00
ERROR       max no of cpic clients exceeded (300)
TIME        Fri May 20 19:20:13 201
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          633
MODULE      gwxxrd.c
LINE        8386
COUNTER     6311
. (WIS 10901)"
Please tell me how to resolve this error, because sometimes dash board is working properly,
Thanks and Regards
Lalit Kumar

Hi Experts,
                 I am waiting for reply.
Thanks and Regards
Lalit Kumar

Unable to Remote connect to a SQL 2008 server

I just set up a virtual server with Godaddy with CF and SQL Server 2008
The SQL server appears to be running because if I RDC into the server and connect using the Server management Studio, it works. To find the instance I have to look at network devices and I find it under MACHINENAME\SQLINSTANCE
The problem I have is that I want to connect to this instance using server management studio on a computer with SQL2005 installed. I guess/hope that a 2005 can connect to a 2008
I'm not 100% sure what the exact correct format is for the "Server Name" when trying to set it up. I've tried everything I can think of
ServerName\IPNumber\Instance
IPNumber\ServerName\Instance
IPNumber\Instance
Nothing seems to work, it kicks back with a big error, aying it can not connect:
A network-related or instance-specific error occured while establishing a connection to SQL Server.
The server was not found or was not accessible. Verify the instance name is correct and that
SQL Server is configured to allow remote connections (provider: SQL Network Interfaces, Error: 26-
Error Locating Server/Istance Spcified) (Microsoft SQL Server)
The firewall on the server is off, I checked the properties of the instance and the option to allow remote connections is also checked
Anybody have any ideas?
Thanks
Mark

Solved this myself.
I was trying to log in with the user name of the adminstrator for the server, which worked locally while on the server but when I tried to use SQL SERVER AUTHENTICATION , tapping in the user name and password, it failed in the same way, even though the password was correct. Connecting using WINDOWS AUTHENTICATION worked, so I checked the users and found that user name did not have a password set because it was the admin I guess, so it just rejected all attempts using SQL SERVER AUTHENTICATION.
What I then did is tried the 'sa' user, and saw that it did have a password set when I viewed it in USERS... so I tried to connect remotely using that, and it worked... problem solved
Thought I'd post that, just incase anybody else came across the problem
After posting this I reversed a change that I had made from info found on another forum, and it stopped working! I put the change back again and it works, so it looks like a combo, here is the info that I found that helped fix the problem
"In the SQL server configuration manager, there is an item called SQL server network configuration, under protocols, I selected the properties of the TCP/IP protocol. There is a tab “IP Addresses” there, and at the bottom of the list is an entry called IPAll. In my case the TCP port was empty. I entered the SQL standard port 1433 in there and I was able to connect."
I had also since posting upgraded to 2008 locally, not that I believe it had anything to do with the problem
Mark

MapiExceptionNetworkError: Unable to make admin interface connection to server

Receiving the following error trying to move mailboxes from Exchange 2003 to 2007 after installation. Verified all NIC's are configured. All Exchange processes are running as 'Local system'. Any other suggestions?
MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:......
    Lid: 10648   dwParam: 0x6D9      Msg: EEInfo: Generating component: 2
    Lid: 14744   dwParam: 0x6D9     Msg: EEInfo: Status: 1753
    Lid: 9624    dwParam: 0x6D9      Msg: EEInfo: Detection location: 501
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: vienna1.cvesd.org
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -1988875570
    Lid: 15000   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Pointer val: 0x0x04a4cef0 (UnknownPtag)
    Lid: 23746
    Lid: 31938   StoreEc: 0x80040115
    Lid: 19650
    Lid: 27842   StoreEc: 0x80040115
    Lid: 20866
    Lid: 29058   StoreEc: 0x80040115
Exchange Management Shell command attempted:
'e3e40217-6649-43be-9feb-0c4e594cbcf1' | move-mailbox -BadItemLimit '10' -TargetDatabase 'CN=Mailbox Database,CN=First Storage Group,CN=InformationStore,

I ran into the same problem during the migration from SBS 2003 Premium with ISA Server 2004 to SBS 2011 Standard, and that is how
I found this thread.
I have tried ALL of the proposed solutions but unfortunately nothing worked for me…
Even though you paid proper attention to the migration path from SBS2003 to SBS2011 manual, followed all the steps, and performed
the suggested step:
To configure remote procedure call (RPC) filtering
1.
Click
Start, click All Programs, click Microsoft ISA Server, and then click
ISA Server Management.
2.
In the ISA Server Management Console tree, expand
Microsoft Internet Security and Acceleration Server 2004, expand
ServerName, and then click Firewall Policy.
3.
In the details pane, click the
SBS Protected Networks Access Rule.
4.
On the
Taskstab, click Edit Selected Rule.
5.
On the
Protocolstab (for an access rule), click Filtering, and then click
Configure RPC protocol.
On the
Protocols tab, clear the Enforce strict RPC compliance check box, and then click
Apply.
…you will still get the notorious
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227) error.
Here is the solution to the Small Business Server 2003 with ISA Server 2004 migrating to the next level scenario:
*** Disable RPC Filter ***
To disable remote procedure call (RPC) filter
1.
Click
Start, click All Programs, click Microsoft ISA Server, and then click
ISA Server Management.
2.
In the ISA Server Management Console tree, expand
Microsoft Internet Security and Acceleration Server 2004, expand
ServerName, expand Configuration, and then click
Add-Ins.
3.
In the
Application Filters pane, click the RPC Filter.
4.
On the
Tasks tab, click Disable Selected Rule.
To save changes and update the configuration, click
Apply.
I also opted to restart the service when prompted after hitting the “Apply” button.
I hope this helps someone to keep whatever is left of his or her hair and lower the blood pressure a bit :)
This was the solution also!!
Thanks. My heart doctor says that now, ina few weeks i will be fine. and hope my hair grows again.. :)
Thank you very much
mpleite

Interface errors

Is there an script that can monitor interface errors (input and output errors) and send an email out when it reaches threshold?
Thanks
Sent from Cisco Technical Support iPhone App

Sure. Here's an example:
event manager applet error_monitor_GigabitEthernet0/1
event interface name GigabitEthernet0/1 parameter input_errors entry-op ge entry-val 5 entry-type increment poll-interval 10
action 2.0 cli command "enable"
action 3.0 cli command "show int GigabitEthernet0/1 | inc error"
action 4.0 mail server 10.1.1.1 from [email protected] to [email protected] subject "Errors on interface GigabitEthernet0/1" body "
Interface GigabitEthernet0/1 has seen $_interface_delta_value input errors in the past 10 seconds: $_cli_result"

'Remote Insight Board Interface Error' - Rogger Server

Similar Messages

Maybe you are looking for