Remote install not working - "Install in  Progress..."

Need advise..please see my original post: http://discussions.apple.com/thread.jspa?threadID=2551359&tstart=0

Nevermind problem solved

Similar Messages

  • Apple remote contra not working with Lion

    I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
    Is there any solution for that?
    Thanks

    It's not working for me either.
    I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
    Please somebody help us!

  • My Apple TV remote is not working.

    My Apple TV remote is not working. It was fine this morning, but now ATV is not responding to it.  It still access iTunes on my Mac so I don't think it's a battery issue. The white light flashes on ATV, but nothing happens.  I have restarted ATV several times from the mains, but no change.  Please help!

    Hey Punkmonk1,
    Thanks for the question. I understand that you are experiencing issues with your Apple TV remote. The following resource may provide a solution:
    Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
    http://support.apple.com/kb/TS5157
    Thanks,
    Matt M.

  • Remote does not work correctly after update

    Hello,
    the subject explain it already:
    After upgrading to 2.3 the apple remote does not work correctly anymore:
    I need to push the buttons twice, and than atv is only reacting sometimes.
    Any ideas?
    BR
    Frank

    Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • I bought a EarPods October last year in USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can lisence music but can not adjust the volume and answer the phone, can I get a new one or what can I get?

    I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?

    Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??

  • OIM 11.1.1.5.0 - Remote Manager not working

    Hi everyone,
    I am working with an AD which I installed on a different machine than my OIM and I would like to install Remote Manager with my AD. I followed all the steps which are described in the documentation but when I launch RemoteManager.bat, I have the following in the console :
    D:\Oracle\Middleware\Oracle_IDM1\remote_manager>"D:\Oracle\Middleware\jdk160_24\jre/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.lib\oimclient.jar;.\ext\spring.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=D:/Oracle/Middleware/Oracle_IDM1/remote_manager com.thortech.xl.remotemanager.RemoteManager
    19 mars 2012 14:31:02 com.thortech.util.logging.Logger info
    INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : SunX509KeyStore : D:\Oracle\Middleware\Oracle_IDM1\remote_manager\config\default-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
    19 mars 2012 14:31:02 com.thortech.util.logging.Logger info
    INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Managerserver socket port is 12346
    19 mars 2012 14:31:02 com.thortech.util.logging.Logger info
    INFO: Class/Method: RMISSLClientSocketFactory/createSocket Remote Manager client socket Host is (+my ip address+) and port is 12346
    I'm not sure this means Remote Manager is working cause I have a problem when I am creating the IT Ressource on OIM : connection refused to host : (+my ip address+). And when I use nmap, I can notice that port 12346 is not open.
    Thanks for your help !
    Thibault

    Hi Thibault,
    Your problem looks like a firewall problem between these servers, because you should be able to do telnet once it is up into both(SSL and NONSSL) ports, default 12346 and 12345.
    What I normally do is:
    DEBUG,20 Mar 2012 09:17:10,170,[XELLERATE.REMOTEMANAGER],Class/Method: RemoteMan
    ager/RemoteManager: Binding Remote Manager to: rmi://TLEONCIO:12346/RManager
    ...DONE
    Allow unsafe renegotiation: false
    Allow legacy hello messages: true
    Is initial handshake: true
    Is secure renegotiation: false
    RMI TCP Connection(3)-OIM-IP, setSoTimeout(7200000) called
    RMI Scheduler(0), called close()
    RMI Scheduler(0), called closeInternal(true)
    RMI Scheduler(0), SEND TLSv1 ALERT: warning, description = close_notify
    Padded plaintext before ENCRYPTION: len = 18
    0000: 01 00 CF D4 CD 02 55 6E CA 00 E5 08 E8 EC 5C 19 ......Un......\.
    0010: 81 4E .N
    RMI Scheduler(0), WRITE: TLSv1 Alert, length = 18
    [Raw read]: length = 5
    [Raw write]: length = 23
    0000: 00001: 5 1035 01 00 120 3 .....
    [Raw read]: length = 18
    0000: EA 35 E7 8F 7F DB C0 01 000C 1 68 2A 24D EA 35 E 71C 8 F0B 7F 8DB0 C
    0 DF 5 A0C 68 2A .54..D. ...h*M....Z
    0010: F4 29 ......5 .)
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, READ: TLSv1 Alert, length = 18
    Padded plaintext after DECRYPTION: len = 18
    ....0..h*M0
    000010: 01 : 10C0 0 BCF D 840 DF CD 02 5 A55 6 EF4 29 C
    ..A 00 E5. 08 E8 EC.Z 5C .)1
    9 ......Un......\.
    0010: 81 4E .N
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, RECV TLSv1 ALERT: warning, close_notify
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, called closeInternal(false)
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, SEND TLSv1 ALERT: warning, description = c
    lose_notify
    Padded plaintext before ENCRYPTION: len = 18
    0000: 01 00 E1 43 9E 6C 4E BF 97 10 03 BA 29 1A 01 EA ...C.lN.....)...
    0010: 08 30 .0
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, WRITE: TLSv1 Alert, length = 18
    [Raw write]: length = 23
    0000: 15 03 01 00 12 0A F7 B7 14 70 18 A0 2C 05 E3 21 .........p..,..!
    0010: 4E D0 27 26 FE 6E F3 N.'&.n.
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, called close()
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, called closeInternal(true)
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, called close()
    RMI TCP Connection(2)-THIAGO_REMOTEMANAGER_IP, called closeInternal(true)
    I write into Telnet command and into telnet connection I write one command called +'EHLO something'+ to write and check a message from OIM-Server to RM-Server using SSL_port
    -->telnet THIAGO_REMOTEMANAGER_IP 12345
    [oracle@xxxxx~]$ telnet THIAGO_REMOTEMANAGER_IP 12345
    Trying THIAGO_REMOTEMANAGER_IP...
    Connected to THIAGO_REMOTEMANAGER_IP (192.xxx.xxx.xxx).
    Escape character is '^]'.
    EHLO THIAGO
    then you will see something like this:
    [Raw read]: length = 5
    0000: 45 48 4C 4F 20 EHLO ****
    RMI TCP Connection(3)-OIM-IP, receive SSL message
    RMI TCP Connection(3)-OIM-IP, WRITE: TLSv1 true, length = 2
    [Raw write]: length = 7
    0000: 15 03 01 00 02 02 0A .......
    RMI TCP Connection(3)-OIM-IP, called closeSocket()
    RMI TCP Connection(3)-OIM-IP, called close()
    RMI TCP Connection(3)-OIM-IP, called closeInternal(true)
    but as I said, first the telnet should be ok. If not, take a look into your firewall rules and let us know.
    I hope this helps,
    Thiago Leoncio

  • Why is Apple remote desktop not working?

    I have 4 machines in a remote office that I need to connect to using ARD 3.6. I have a VPN connection working and am able to successfully control all but one of the machines. I have checked all of the settings and have confirmed that the Mac that ARD is not working has all of the same sharing preferences as the machines that are working. All of these machines are on the same network. All of the machines are running OS 10.8.x. All machines that I am able to connect to are running 10.8.3 but the one I can't is only at 10.8.2, but that is only because I haven't been able to remote into it yet to perform the OS update. The weird thing is that I can see the unresponsive Mac (can see the IP address, the version of ARD, OS version, etc.) but I simply can't connect to it to control or observe using ARD. I am however able to use TeamViewer from a remote Windows PC.
    Can someone provide some ideas as to what  to check and or how to fix this? TIA.

    Do you have remote login enabled?
    Have you tried using the kickstart command to restart the ARD Client?
    http://support.apple.com/kb/HT2370?viewlocale=en_US&locale=en_US
    If it's not enabled you will need to call a user or someone at the location and have them check the box to enable remote login.
    In the past the ARD client has 'stalled' forcing me to restart the agent. Another option would be to have someone restart the machine for you.
    I have actually had to use ssh to uninstall and re-install the client software due to corruption or ??.
    Let me know what the outcome is. I see this was from May so let me know either way.
    Thanks

  • Audigy 2 ZS Platinum - Remote Control not work

    hello all.. Sorry for beating a dead horse. My installation on a P4 3.0 ghz machine of the Audigy 2 was flawless. All hardware diagnostics that have been run have been successful. Everything works. I updated all drivers. Everything is functional on the unit.....but...the remote control doesn't work.
    When I got to setup the remote control and it asks to select a transmitter (rm-500) from a drop down list, it shows rm-500. but it the drop down list for the receiver is BLANK? I've tried several suggestions from the forum but it still doesn't work.
    Have I missed something or is it quite possibly just a dud unit that I have to take back.
    thanks for all suggestions and ideas...
    sony

    OK, let's see, you have a device that is still under warranty. You properly installed said device. You put batteries in the remote but it does not work no matter what you try. It seems to me that you have only one option and you mentioned it in the penultimate sentence in your post.
    Hope it's not a long dri've.:smileyvery-happy:
    Richard
    Message Edited by sf3454 on 03-3-2005 03:28 AM

  • Apple tv remote is not working

    I have an apple tv that isn't responding to its remote. I restored the apple tv it is still not working. I think the remote is dead. I was wondering if there is anyway to get the remote app to recognize the apple tv considering it has been recently restored. I don't know what to do help please!

    I am watching this thread for a solution.  I have also changed the battery and tried pairing but see no response.  The tv screen shows all my options, but the remote won't move the cursor.                                                                       
    I've installed the new battery both ways (+down and up) with the same result each time.  Which is correct?

  • My remote will not work with my TV @nywhere card, Please help.

    I have just installed my TV @nywhere card and it works great. I have all the cables plugged in right but I can't get the remote control to work. I even tried a new battery. I'm running windows XP pro. Any Suggestions?

    What's wrong with it is it's broken. The power button is broken. The dock port may be broken. The battery may have reached the end of its useful life.
    Make an appointment at the genius bar of your local Apple Store and have it checked out. There are no words that will fix failed or broken hardware other than "here is my credit card"...
    An out of warranty replacement for an iPhone 4 is only $149.

  • Remote desktop not working on mountain lion

    My ARD does not work on Mountain Lion. The software opens but all I get is the menu at the top, and my only working option is to quit. I spoke to Apple support and they suggest (as they usually do) to reinstall the whole operating system, but I can't accept this as a valid answer as everything else works. There must be a way to fix this without having to reinstall a machine that came originally with Mountain Lion!

    I was able to fix my issue by just uninstalling ARD (I used AppZapper) - and just reinstalling it - no "Archive & Install" required - best of luck with your situation!

  • Remote Desktop not working on client after crash

    I was installing the ARD Client along with some other OS upgrades on two client computers. My main ARD console was busy copying some files so I set up ARD to install the pkgs via the task server on another Mac. During the install my main ARD console crashed. Now the clients show up with the status that Screen sharing is allowed but they show the old version of the ARD client is installed. I manually installed the new ARD client but it still shows up on my console as the old version. Sometimes I can connect to the clients and sometimes I cannot. I can't do anything other than screen sharing and that is not working well either. I went to the client computer and stopped and started ARD through system preferences. When that didn't work I used the terminal command to kickstart ARD on the client. No change on the admin side. I've also noticed when I am able to connect to the client that it is constantly reconnecting to it like it is dropping the connection. I ran Activity monitor on the client and ARDAgent shows up there but keeps disappearing like its starting and stopping on its own. Has anyone had anything similar happen to them?

    When I looked in this folder, I saw the "Client" folder with the red "no access" icon on it.  I did a GetInfo and changed the permissions for this folder to include Administrators with read/write (why it wasn't already like this as I was logged into the server through ARD as admin [server is headless], I'll never know).
    I propagated this perm changes down through the folder's children and all seems well.  Its likely that because of the access issue, ARD could not initiate any connections (vnc://serverIP did not work either initially).
    YMMV.

  • IPhone 4 Remote App Not working

    Hello,
    Sorry for posting another 'not working' thread, but having searched the forum I cannot find my answer.
    I am not very technical, but I have iTunes and an iPhone 4.
    I have the remote app and the app has worked perfectly up until recently.
    I have upgraded iTunes to 10 and also my antivirus.
    Now I know alot of these things could be caused by the firewall, but I have allowed iTunes to be let through the firewall and I have switched off the firewall in the past to ensure it was not this.
    When I switch on the computer and open iTunes then go to the remote app it works. It is when the iPhone 'sleeps' that the library wont re connect, OR if i have been using iTunes and then try and start the remote that it will not work.
    Any ideas at all as it is so frustrating. I am not technically minded, so switching router channels etc and proxy settings/DHCP etc dont really make sense to me.
    I have tried rebooting everything including the router, but believe it is something simple as it was working prior to iTunes 10.
    I am running a PC on Vista
    Thanks
    Steve

    no I use both ipad2 iphone4 with remote app and have no issues with ios
    try removing the setup and start over

  • LaserJet Pro MFP M125nw - Scan to app All-in-One Remote does not work

    Hi gurus,
    Basically I have pruchased that super-printer and I am now trying to achieve scan to my mobile devices.
    I have one iPad 2 on iOS 7, on 2 Android devices (smaller tablet and phone) both running Kitkat 4.4.2
    I am trying to submit a scan from all these devices and retrieve the output within my mobile devices, actually this is fairly described here and concerns accurately my printer model :  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486319&tmp_task=useCategory&cc=us&destPage=pr...
    Unfortunately, What happens :
    - From my iPad, the AiO app states that my printer is not compatible with the application !!
    - From my 2 Android devices, the All-in-One Remote app will work fine, except the scan feature as nothing happens (well, when tapping either 'Preview' or 'Scan' button in the Scan section, I see a 'Cancel' button during 0,1 second and I am back to that scan section)
    Any one could help please ???
    This question was solved.
    View Solution.

    Hello,
    Can no one help ?
    Is the product description misleading ? Is the AiO app not really reasy to support this printer ?

  • Remote control not working on Touchsmart 610-1030uk

    Had been working fine for long time. Now out of warranty. Battery fine. Indicator on remote and on PC (white LED on front panel) both show IR is working. Mouse and keyboard still work fine. I have tried uninstalling and reinstalling drivers for Microsoft eHome infrared transceiver but still can't get the machine to respond to remote control. 
    Any thoughts?
    This question was solved.
    View Solution.

    Hello frrw. Sorry to waste your time. I changed the batteries and it works fine. It seems the red LED on the remote and the white LED on the PC that flashes when I press a button on the remote do not mean that the batteries are strong enough. 
    Meanwhile I have that recurring problem with blu-ray players. I will post a new question and maybe you can help. 
    Many thanks. 

Maybe you are looking for