Remote JDeveloper problems

Hi,
We have some developer working in the US East Coast while our code repository is located in the UK. WE use CVS and JDeveloper 10.1.3.0.4.
We are facing a severe delay in the project because the remote JDeveloper WS are very unstable.
In particular JDeveloper hangs when the developer clicks the viewController and when JAG is executed.
The remote WS are connected trough a VPN tunnel. The WS have enough RAM (at least 2 GB) and almost all of them are dual core.
Any idea would be really appreciated.

Thanks for replying, and for the other reply regarding subversion. I have it working.
For those that are trying to get Subversion working in TP4
* URL = http://hostname/svn/Repository
Apache 2.2 config.
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<Location /svn>
DAV svn
SVNListParentPath on
SVNParentPath D:\SubversionRepository
#SVNIndexXSLT "/svnindex.xsl"
AuthType Basic
AuthName "Subversion Web Authentication"
AuthUserFile "c:/Program Files/Apache Software Foundation/Apache2.2/passwd"
Require valid-user
#AuthzSVNAccessFile svnaccessfile
# WebDAV settings
# SVNAutoversioning on
# ModMimeUsePathInfo on
</Location>
Regarding deploying to the VM SOA infrastructure.
I have found the Resource Palette.
I added a new Application Server.
* Type
** Type:Exists in:Resource Palette
** Connection Name: ExternalSOA
** Connection Type: Oracle Application Server 11g
* Authentication
** Username: fmwadmin
** Password: ***I have no idea what this is!! It's not 'welcome1' as per the JDeveloperTP4 install docs but then I have not installed BAM - Do I need to now that I am trying to access it remotely? ***
** Deploy Password: Unchecked
* Connection
** Hostname: IP of my VM
** MAS Port: 23891 (same as the VM JDeveloper settings)
When I test, I receive
Failed to retrieve RMIServer stub: javax.naming.CommunicationException [Root exception is java.rmi.ConnectIOException: non-JRMP server at remote endpoint]:
...Lyall
Edited by: lyallp on Nov 6, 2008 3:09 PM
Edited by: lyallp on Nov 6, 2008 3:42 PM

Similar Messages

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Remote JDBC Problem with Oracle BPM Studio

Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
     at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
     at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
     at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
     at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
     ... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PM

I guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
     at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
     at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
     at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
     at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
     at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
     at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
     at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
     at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
     at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
     at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

OS X Lion and Apple remote control problem

After installing OS X Lion my apple remote control no longer works properly. The menu wont come up on the screen, but it plays music if you press the buttons, but you are riding blind, can anyone help on this one?

It's not a problem with the remote, the problem is that Lion no longer has FrontRow.

Cisco ASA 5505 VPN Remote Acces Problem

Hello Guys .. i have cisco 5505 Asa security Adaptive , and i have two local networks 192.168.1.0 /24 and 192.168.2.0/24 , and i have my ISP public connection,,,,,what i want to do is i want to connect Remote VPN connection and access my Private Network of 192. my public ip is like 155.155.155.0 /24 ...
i put my ISP connection in the EO/0 and my private networks into E0/1 and E0/2.
so i created a remote vpn connection ,, and then i connected to the VPN ..
My problem i can't reach and access my private networks .. this probem frustrated me a lot .. so cisco guys please help me
and iam using ASDM cisco graphic interface

Hi Timothy,
Could you please try disabling UAC in Win 7. Also try to connect from a machine where you have admin privileges (in case you are trying connection from a restricted machine.
Also, add the site under trusted sites in IE. i.e if you are connecting to https://1.1.1.1 or https://vpn.abc.com then please add it under the trusted sites:
Let me know if this helps.
Thanks,
Vishnu Sharma

Remote Shutdown problem

Hi,
I am trying to shutdown (and restart) a Windows 7 (RC1) PC on my home network from another PC running Windows 7 (RC1). I am running the following command at a command prompt (I have tried with and without Administrator privilege):
shutdown /r /f /m \\backup
Originally I was getting "Access Denied" but after searching the internet I disabled file sharing on the remote PC and I now get the following error message:
"backup: The entered computer name is not valid or remote shutdown is not supported on the target computer. Check the name and then try again or contact your system administrator. (53)"
I have also tried using the IP address and the result is the same.
I am using the same user name on both PCs, with the same password and the user is a member of the administrator group on both PCs. I have also checked the following policy settings on the remote PC:
Local Policies:User Rights Assignment:Access this computer from the network: Administrators...
Local Policies:User Rights Assignment:Force shutdown from a remote station: Administrators
Local Policies:User Rights Assignment:Shutdown the system:Administrators
Local Policies:Security options:Network access: Sharing and security model for local accounts: Classic - local users authenticate as themselves
Local Policies:Security options:Shutdown:Allow system to be shutdown without having to log on.
Is there anything else to check?
Thanks
Patrick

I know this is a late response, but when I had the same problem, I discovered that the problem was the firewall setting related to File and Printer Sharing (SMB-IN). That rule was disabled for the Public profile; I'm not sure what triggers that profile's
use over the Domain or Private because the machine is on a LAN with the Domain Controller. When I enabled that rule, I was able to shutdown the servers. The puzzling thing for me is that the rule seemed to be "disabled" on its own.
I distinctly remember shutting down all 6 of my servers. Then 2 weeks ago, I could only shutdown 5. This week I could only shutdown 4, so I had to enable this rule on 2 servers, and I don't know what would have caused that setting to be changed.
Obviously, if any firewalls change on their own, that would appear to be a large disconcerting bug.
Just to reiterate, the firewall rule which prevented me from remotely shutdown was the File and Printer Sharing (SMB-IN) Inbound Firewall rule associated with the Public profile. I enabled it, and I could execute a remote shutdown command.

JDeveloper problem setting up a database connection

I am having some problem setting up a connection to my database. Before I say any more let me explain what I need. I need 2 database connections 1 to a 10g R3 database and one to an 8.0.5.
I do realize that JDeveloper will only connect back to 8.1.7 because of the JDBC version that is installed with it.
What I really need to know is "Is it possible to define and use 2 different versions of JDBC" I really don't want to move back to the version that works with both because I am afraid of what performance/benefits I will lose from the latest and greatest.
The latest version that I can determine will work with 8.0.5 is the last version for 9i.
Any Ideas would be helpful.
The reason for this situation is that I have a production database that I will have to keep up with until the full version of the system is complete so that is why I even care about 8.0.5.
Thanks alot for your time,
Thom

I have a similar problem and I would much appreciate any help in this matter.
I have a wireless network set at home with two computers connected to it:
My workstation called Home-ws and my laptop called Acer. I can access the d:\ drive of my workstation from my laptop without any problem.
On my workstation I installed the Oracle 10g product and on my laptop I installed Oracle SQL Developer. On SQL developer I am trying to create a connection to the Oracle server:
My settings are as below:
Connection name: orcl_system
User name: system
Password: ******
Host name: Home-ws
Port: 1521
SID: orcl
When I push test I am getting the following error message:
Status: Failure –Io exception: The Network Adapter could not establish the connection
Are there any special settings that should be made set up a wireless connection to my database?
Then I did the following things below:
1. I downloaded from oracle.com the instantclient-basic-win32-10.2.0.2-20060508.zip file and unzipped it in a folder called instantclient_10_2. There were a number of DLL and two jar files plus sqlplus.exe
2. I started sqlplus from that server
3. sqlplus failed with a similar error as sql developer.
4. I checked for tnsping. There is no tnsping such and exe on my laptop. I looks like I have to install the DLLs I downloaded them but there are no instructions about how to install them. Should I just copy them in system32 folder?
5. I looked for firewalls on my Home-ws workstation (where my oracle server is installed) and on my Acer laptop. The firewalls were activated. I added on exception called oracle for port 1521 on both computers and tried to connect again. I tried with both TCP and UDP options and it did not work in both cases.
I am out of ideas. Any help would be much appreciated.
Thank you in advance for your help.
Julian

Remote Sharing Problems with my MacBook Pro. Please help...:)

Hi all. Could really use some advice from any network pros out there.
I'll be as detailed as possible.
I am about to travel overseas for a month and wanted to setup remote access to my old G5 Dual 2.5 tower in my studio.
I found that the new OS, phones etc. have the remote management and screen sharing options so I thought I would set it up.
The first day I did it, it all worked properly and I, and my friends could all log in no problem from our phones via VNC, or computers using the 'Connect To Server' option as well as Chicken of the VNC.
I also set up my friends computer across town to do the same.
So, the next day I was fiddling with my wireless that happens to drop out every once in a while, thinking its a phone or printer interfering, but anyways, when I restarted the network, the local IP of the server computer had changed, so no problem, I went back through all of my settings and changed the IP, but then it wouldn't connect anymore. AFter 4 hours of fiddling, restarting, changing the port-forwarding etc. in the routers, I finally got it working...
Then this morning, I couldn't get it to work, and none of the IP's have changed....
Now I'm confused as it seemed to be setup fine.
My setup is as follows.
DSL modem, I have the external IP 76.166......etc.
This DSL modem connects via ethernet to a Linksys BEFSR41 Router, which then connects via ethernet to an older Airport Extreme Base Station and also a newer Airport Express.
The G5 I am running as a server is connected via Ethernet to another Airport Express in my studio which is setup to be a wireless 'remote' on a WDS network where the older Extreme Base Station is the 'main'.
Current local IPs are standard.
Base Station is 10.0.1.1
'Remote' Airport Express is 10.0.1.5
G5 'server' computer is 10.0.1.2
Linksys router is 192.168.1.1
I have logged into the Linksys router, gone to the Applications & Gaming/Port Range Forwarding section and enabled a port on 5900, both TCP and UDP, to go to the IP 192.168.1.102.
I have gone into the Airport Utility of the base station, clicked Advanced, and added the port forwarding of 5900 to local IP 10.0.1.2.
The remote management section on the Server G5 is on, with vnc password etc. all users.
When I try and access this computer using the 10.0.1.2 IP on the local network, it works fine, but when I try the external IP, I get the 'connection failed' error.
Am I missing something....?
And sorry for the long email but if you are going to help, I know you'd want all the info.
Oh, and I have repaired permissions although not sure if that helps any.
Thanks in advance for any help.
Wiz

What sort of videos? What are you trying to do?
We can't advise anything that violates breaking copy protection schemes or violating copyrighted material on this forum.
If your sure your not violating, then there is SnapZProX that will record anything playing on the screen into Quicktime file with sound, and there is Firefox browser with various add-ons for downloading Flash/YouTube videos and there is Transmission to download p2p files. However with that last one you really have to be extra careful the content is not a stolen copy or malware as you can be sued and/or have your machine compromised.
For safe downloading of videos, you should take a look at Netflix, for $8 a month and installing Silverlight (they will provide it) you can stream tons of videos to your browser for viewing (not copying) and see the videos again if you wish so it isn't necessary to copy them and clog up your drives with large files.
Movie videos are usually watch once and never watch again, so it's really unnecessary to store them (especially illegal copies) and clog up your machine or be paranoid having the content and possibly being sued over it.
There is also iTunes that allows rentals, but it's not as inexpensive as Netflix $8 all you can eat monthly, but it has newer titles.

SapGui Front end Remote installation Problem

I use Sap Installation Server V8.1.0.153 (Compilation 4)
I try to instal a SapGui to remote PC.
   Remote -> Execute process Remotely -->Enter PC HostName (ex. C18140) --> Enter Application Name (ex. d:\sap_inst\Setup\NwSapSetup.exe /Silent /Product="SAPGUI710", copy line from SAPGUI710 package)
Select Execute to running the command and I received this error:
Executing D:\sap_inst\Setup\NwSapSetup.exe /Product="SAPGUI710" on C18140, please wait...
Failure in executing D:\sap_inst\Setup\NwSapSetup.exe /Product="SAPGUI710" on C18140. Check parameters, credentials and verify if the Windows workstation is running!!
For testinf purpose Clic on Display running process and select display (other screen) --> work OK.
I suppose the problem is related to my environment, but I really don't know if exist some tools I can run to diagnoste this problem.
Someboby can help me.

when i gave c:\program Files\SAP\sapsetup\NWsapsetup.exe /silent/uninstall/package="sapgui7.10" for uninstall the frontend in the client PC
As you suggested i collect the logs....
here i mentioned the Nwsapsetup.txt logfiles
15:21:03 NwSapFeiKr 2   SAP Frontend Installation Kernel initialized
                        (Unicode Release build)
15:21:03 NwSapsEngn 1   SapSetup Workstation Engine Library Loaded
15:21:03 NwSapSetUI 1   SapSetup UI Library Loaded
15:21:03 NwSapsAtlC 1   SapSetup ATL Common Library Loaded
15:21:04 NwSapSetup 1   Wait on registration Threads returned 0
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapFeiKr.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapFeiSh.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapSetupAtlCommon.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapSetupUi.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapSetupEngine.Dll
15:21:04 NwSapSetup 1   Registration Activity took 1.651489 seconds
15:21:05 NwSapSetUI 1
15:21:05 NwSapSetUI 1   UI: Show Splash Screen
15:21:05 NwSapSetUI 1   Constructing a new UI Manager Object
15:21:05 NwSapsEngn 1   Engine: Initialize()
15:21:05 NwSapsEngn 1   Initializing the Installation Engine
15:21:05 NwSapsAtlC 2   Variable 'APPDATA' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'CommonProgramFiles(x86)' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'HOMEDRIVE' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'ProgramFiles(x86)' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'PUBLIC' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'LOCALAPPDATA' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'ProgramW6432' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'CommonProgramW6432' not available on this system
15:21:05 NwSapFeiSh 1   Trying to load 'C:\Program Files\SAP\SapSetup\setup\vbscript.dll'...
15:21:05 NwSapFeiSh 2   Library not found on installation source, searching local folders...
15:21:05 NwSapFeiSh 1   "C:\WINDOWS\system32\vbscript.dll" successfully loaded.
for your views....

Cisco VPN Software and Remote Desktop Problem

Hello-
Please have patience as I just got my first mac and I'm really just learning how everything works.
Anyway, I'm trying to connect to my office network from my iMac (OS X 10.5.3) using the Cisco VPN client ver. 4.9.01 (0030) and the Remote Desktop Connection v2.0.0 Beta 3. I'm able to connect via the VPN but I cannot connect to the remote machine using either the machine's hostname or IP address.
In order to troubleshoot the issue, I tried to ping the remote machine after connecting via VPN and it fails. The name is resolving but ping fails with a "No route to host" and then "Host is down error." However, I know the host is up since when I connect via VPN from my PC I can ping the remote machine without a problem.
Anyone have any ideas? Does the Cisco VPN client for Mac not work well? Is there some simple configuration setting I'm missing somewhere? BTW, I'm connecting to the Internet via WiFi and am using a Linksys WRT54G router.
thx,
ian

Hello Ian:
Welcome to Apple discussions (and to the wonderful world of Macs). I think you will find these forums represent the best on-line community anywhere - and everyone is a volunteer!
I am no help with your problem as I have not used a Cisco VPN. However, in my previous business life I did connect my home Mac to my business VPN. I found that our IT people were most helpful in smoothing connection issues.
This forum addresses connection issues if you want to post there:
http://discussions.apple.com/forum.jspa?forumID=1222
Barry

Remote app problem - read everything and still no help

Hi
Similar to many people, I'm having a remote problem as well. Actually, the app worked just fine for a week, then all of a sudden stopped working. I guess it could have been some kind of a windows update issue maybe because I haven't changed anything. The thing is now that it's trying to connect to my library but fails. I've turned my firewalls completely off, re-installed the app many times on my iPhone 3G, re-added the library many times (then it connects so I can insert the 4-digit code), tried the "forget all remotes", the sharing is enabled in iTunes, I'm connected to the same WiFi network, it's not hooked with a cable to sync when I've tried it but still, all it says is "could not connect to library". I have been working with this issue for 2 days by now and read hundreds of posts but still no help. Could please anyone help me with this issue, please please!
Thanx

Try this
In Windows go to Start - Run - type services.msc then press ok
Look for Bonjour Service - is it started? if not right click on it and start it
If it is started right click and restart the service. Now try remote app

Remote Icom8500 problem variable hex

Hello. (First, sorry for my english, I translate it with google...à
I try to remotely control an ICOM 8500. (There's a topic here http://forums.ni.com/t5/Discussions-de-produit-de-NI/conversion-en-hexa/m-p/821160#M25265 , but a bit old)
I have a problem with the gain:
I want to send the following command (in hex):
FEFE 4AE0 1401 0255 FD (with the red variable from 0000 to 0255 per slide).
The problem is that I can only set the variable of my hex value (eg. For 0255: 3032 3535).
Find Out How?
And
supplementary (but less important), is it possible with the slide,
having the scale of 0 to 100, but to send values from 0000 to 0255??
Thank you for your answers

Here the solution
http://forums.ni.com/t5/Discussions-de-produit-de-NI/T%C3%A9l%C3%A9commande-Icom8500-probl%C3%A8me-v...

Remote database problem with Geometry data type

Hello!
I'm trying to insert and update a spatial table in a remote database. The syntax looks like:
insert into tableA@remotedb (col1, col2)
select col1, col2 from tableA
where col3='abc';
This works fine with regular tables. But when I try it on spatial tables, I get this error:
'remote operations not permitted on object tables or user-defined type columns'.
My table contains geometry datatype and user-defined datatype. Does anyone know how to solve this problem?
Thanks!

I created 2 temp tables in the remote db. One contains MDSYS.SDO_Geometry column without user-defined column; the other one has user-defined column without MDSYS.SDO_Geometry. Both got the same error, ORA-22804: remote operations not permitted on object tables or user-defined type columns.
But strangly, I tried to insert into a local table from a remote table with MDSYS.SDO_Geometry column, and it worked! And I tried the same thing with user-defined column, but it didn't work.
I wonder why insert sdo_geometry column from local db to remote db didn't work, but it worked the other way round. And inserting user-defined column between db didn't work at all!

JDeveloper problem with CMP

Using JDeveloper 903, I receive the following error when
attempting to run a container-managed EJB:
SQL error: Io exception: The Network Adapter could not establish the connection
However, the connection is fine according to the Connection wizard: clicking "Test Connection" gives "success!".
I can also view database tables through the System Navigator Connection view. The problem seems to be the embedded oc4j server's inability to open a database connection for CMP.
How to fix this?
-T. Sorgo
[email protected]

Hi Yuval,
Yes, this is standard default behaviour for OC4J!
Let me guess -- you're using the JDeveloper deployment wizard, right?
Bad move, buddy! Gee, wouldn't it be great if the JDeveloper wizards
actually worked properly (sigh).
Easiest thing to do is to edit the "orion-ejb-jar.xml" file immediately
after deployment. Look for the "entity-deployment" element, and change
the "table" attribute so that it equals the correct name of your table.
Of-course, personally, I steer well clear of the wizards, because I
don't know what they're doing but I'm sure it's not something that I
want them to do.
I also suggest you check out the documentation from either:
http://www.atlassian.com
or
http://www.orionserver.com
Good Luck,
Avi.

Jdeveloper - Problem with undo/redo

Hi,
I am facing a problem while using the Undo/Redo option in jdeveloper. When i press the CTRL+Z(undo) option for a lengthy changes, the CTRL+Y(redo) option is not working properly.
- Shankar S

In my experience of JDev, The correct keyboard shortcut for redo is Shift + Ctrl + Z .
Ctrl + Y deletes the current line.
I don't know if that can be changed.
Remi

Remote JDeveloper problems

Similar Messages

Maybe you are looking for