Remote JNI_CreateJavaVM call

Hi everyone.
I have been running for some time a JNI based
application. It begins as a C++ based program, and
launches JVM at some points of the program to show
graphical information. I use Swing components to
achieve application requirements and it works
properly.
I'd like to know if it's possible to launch JVM
(using JNI_CreateJavaVM or other functions) on a
computer different from the one C++ program is being
executed. So I could send visual information to
different computers without C++ EXE and JAR files
distribution, and without the need to run the program
every time a computer needs the information.No, not as stated.
Remote computers never execute applications remotely. What happens is that a 'process' on a remote computer responds to a 'request' from a client and starts up an application on the remote computer.
So you have to have something already running on the remote computer to start anything.
There are common tools called remote command shells which allow you to do this. To use one of these in java the following conditions would have to be true:
-The remote command shell server is installed on the remote machine.
-You can access it from the client machines (firewall issues.)
-You write an interface in java that simulates a client remote shell interface.
Alternatively you could just presume that your process is already running on the remote machine. It waits for requests from a client, runs it, and sends the results back. And that leads into some of the other stuff that you are looking at.

Similar Messages

Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?

What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support

Two remote objects calls on the same php class

Hi to all,
I've encountered a strange issue while developing with remote objects.
I've a mxml component with an init() method inside which is called by a menu.
When the init() method is called it makes 7 remote object calls which are bound to some components' dataprovider.
Among this calls I've got 2 remote object which refer to the same remote class. This because I have to call the class twice and the bind the result to two different combobox. Below you find the code:
<mx:RemoteObject id="myFile" source="myRemoteClass" destination="amfphp" showBusyCursor="true" makeObjectsBindable="true" fault="traceFault(event)"/>
<mx:RemoteObject id="myXls" source="myRemoteClass" destination="amfphp" showBusyCursor="true" makeObjectsBindable="true" fault="traceFault(event)"/>
in the init function I make this calls:
myFile.listDir("dir_1")
myXls.listDir("dir_2")
then in the mxml code I bound the result of myFile to combobox1 and the result of myXls on combobox2.
The problem arise when I call the myXls' listDir method. When I call it I receive the following error:
code:
Client.Error.DeliveryInDoubt
Message:
Channel disconnected
Detail:
Channel disconnected before an acknowledgement was received
The strange thing is that not only the myXls object returns this error, but also all the other 6 remote object return the same error above.
I'm not sure, but I guess that the error could be caused by the two remote object which call the same php remote class. If I comment one of the two calls everything works fine.
Do you have any suggestion about?
Thanks!!
Bye
Luke

Hi Jan.
1) We have the 2 VO, each with 3 rows to fill in data. What I mean is that when i just fill in all the fields for the first row of the first VO, and the value of one of these fields is bigger than 50, then after the exception is thrown and the message is displayed, the fields for the first VO are duplicated and shown in the second VO as if the user had inserted them.
2) We tried yesterday the validateEntity and a Method and Atributte Validator approaches after reading that white paper with the same results.
The validation is correctly done using any of the those methods.
I will try to reproduce this issue with the HR schema.
Thanks in advance once again.

Weblogic 10.3.0 issues with remote object calls.

All:
I was wondering if anyone has experienced any issues with Weblogic 10.3.0 dropping initial remote object calls over AMF Secure Channel. Here are the issues we are experiencing.
1. FLEX applications fail consistently on the first remote object call made across the AMF Secure Channel. Resulting in the request not returning from the application server; which has had varying affects on the different applications including missing data, application freeze and general degrading of the user experience.
2. FLEX applications require a browser/application refresh once the application has been inactive for a certain period of time. In our experiences the behavior occurs after 30 minutes of inactivity.
I've deployed this same code to Weblogic 10.3.3 and the behaviors go away. Are there any patches to 10.3.0 that might take care of this issue that we are not aware of?
Thanks for you help,
Mike

Hello,
I found the problem. But I needed change the target of all my datasources until discover that one of my datasource didn´t answer and no errors was trigged.
My server was waiting this datasource, and not get started.

Java2 SDK SEv1.4.1_01-Win Install Failure - remote procedure call

Whenever I try to install the J2 SDK 1.4.1 on Windows XP Pro, everything works til the actual install is supposed to start. It just hangs there. When I hit the Cancel button, nothing happens; so I have to use task manager to cancel it. Afterward a small window with a message saying "An error occurred while launching the setup. The remote procedure call failed". I found a similar posting last spring for XP & J2 SDK 1.4.0, but there was no resolution posted. Does anybody know what the problem is?

I would be very interested in a solution for this problem as well. I get father. The installer runs all the way through until it is done (100%). But it does not complete and hangs. If I cancel install the error dialog with the following message. "An error occurred while launching the setup. The remote procedure call failed." appears. This is also an Windows XP Pro machine.

Remote procedure call failed and did not execute response after changing contents

Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.

Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen

Remote Procedure Call Failed - Verifying Account prior to establishing PIN as sign in option

PC Settings / Accounts / Sign in options / PIN / Verify Account info / : I enter my Microsoft Account password and receive the following message:
"Remote procedure call failed"
Cannot cancel - screen keeps reappearing.
I have successfully established a sign-in PIN for my Win 8.1 desktop. The above problem is occurring only on my Win 8.1 laptop.

Hi,
Sorry for my late reply.
Regarding the issue, please ensure that RPC service is start.
If it stops, I suggest you perform the following step to start it.
1.Press Win+R, and type regedit, then press enter.
2.Please navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RpcSs and
locate Start registry key
Double click on Start and edit the value:
Change Startup type :
Automatic - 2
Manual - 3
Disabled - 4
Automatic (Delayed Start) - 2
Note: When you change to Automatic (Delayed Start) a new key DelayedAutostart is created with value 1.
When you change to Automatic from Automatic (Delayed Start), DelayedAutostart change value to 0.
If it cannot start, please refer to the following article to test it.
"Could not start the Remote Procedure Call (RPC) Service. Error 1058" error message when you manually start the Remote Procedure Call service
http://support.microsoft.com/kb/838428
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Exchange 2010 SP3 Failing to Install "The remote procedure call failed"

I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
Here is the exchange setup logs output:
[11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
[11/15/2014 09:10:52.0512] [2] Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
           Error code 0X8000500D (20493): This property can't be found in the cache.
[11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
[11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
[11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
[11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
   buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
[11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
[11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
[11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
[11/15/2014 09:14:12.0977] [0] End of Setup
[11/15/2014 09:14:12.0977] [0] **********************************************
Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
Exchange Management Console-Local
2652
45
00:00:18.9698426
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
0
Exchange Management Console-Local
2652
9
00:00:37.7834262
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
remote procedure call failed.'. --- End of inner exception stack trace ---
0
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.

Hi,
Please try to remove the Water mark and Action keys under
HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
After that, reboot the server and rerun the set up.
This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
Best Regards.

Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP    10.x.x.x:53            0.0.0.0:0
LISTENING       1692
[DFSRs.exe]
TCP    10.x.x.x:54669
10.x.x.x:5722          TIME_WAIT       0
TCP    10.x.x.x:54673
10.x.x.x:5722          ESTABLISHED     1656
[DFSRs.exe]
TCP    10.x.x.x:64773
10.x.x.x:389           ESTABLISHED     1692
[DFSRs.exe]
TCP    10.x.x.x:64787
10.x.x.x:389           ESTABLISHED     1656
[DFSRs.exe]
TCP    10.x.x.x:64795
10.x.x.x:389           ESTABLISHED     2104
Receiving Member:
[DFSRs.exe]
TCP    10.x.x.x:56683
10.x.x.x:389           ESTABLISHED     7472
[DFSRs.exe]
TCP    10.x.x.x:57625
10.x.x.x:54886         ESTABLISHED     2808
[DFSRs.exe]
TCP    10.x.x.x:61759
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61760
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61763
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61764
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61770
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61771
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61774
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61775
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61776
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61777
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61778
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61779
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61784
10.x.x.x:52757         ESTABLISHED     7472
[DFSRs.exe]
TCP    10.x.x.x:63661
10.x.x.x:63781         ESTABLISHED     4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.

I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.

Completely different AMF request packets for same remote service call from Flex to PHP using ZendAMF

I was trying to debug why one of the remote-services in our Flex application was failing randomly. What I found was interesting. Completely different AMF request packets were sent for same remote service call from Flex to PHP.
When the service call succeeds the AMF request packet looks like the following:
POST /video/flex/bin-debug/gateway.php HTTP/1.1
Host: localhost
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.15) Gecko/20110303 Firefox/3.6.15
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 115
Cookie: PHPSESSID=j6u30i8uu6c3cvp8f4kipcpf05
Referer: http://localhost/video/flex/bin-debug/main.swf/[[DYNAMIC]]/5
Content-type: application/x-amf
C    ontent-length: 305
Flex Message (flex.messaging.messages.RemotingMessage)     operation = getMemberFromEvent    clientId = 2F997CD0-7D08-8D09-1A9B-0000422676C8    destination = MembereventService    messageId = B46AB58D-2241-83F0-41E4-9FE745565492    timestamp = 0    timeToLive = 0    body =     [      280    ]    hdr(DSId) = nil
And when the service fails the AMF request packet looks like this:
ServiceRequest: getMemberFromEvent; RemoteService; getMemberFromEvent
(mx.messaging.messages::RemotingMessage)#0
body = (Array)#1
    [0] 250
clientId = "1AA4FAAB-AEA5-8109-4B0D-000002B3A9A1"
destination = "MembereventService"
headers = (Object)#2
    DSEndpoint = (null)
    DSId = "nil"
messageId = "2F92E6C0-FE92-A09B-B150-9FE2F28D9738"
operation = "getMemberFromEvent"
source = "MembereventService"
timestamp = 0
timeToLive = 0
Also, following is the error message on Flex when the service fails:
{Fault code=Channel.Call.Failed, Fault string=error, Fault detail=NetConnection.Call.Failed: HTTP: Failed, Destination=MembereventService}
We are using Swiz as the micro-architecture for Flex development and Zend AMF for remoting between Flex and PHP.
Any ideas what is wrong here, what is causing Flex to send different request packets for the same service & what I can do to fix it?

Hi, I know that your post is almost 5 years ago, but have you found the solution to this issue?
Thanks.

An error occurred when executing a REMOTE FUNCTION CALL.

Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
<b>Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "RFC_NO_AUTHORITY"
    on the called page.</b>
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.

first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu

Dump problem while remote FM call

Hello Experts,
In R3 system there is a RFC Fm Z_SALESORDER_CREATE which is wrapper of standard FM SD_SALESDOCUMENT_CREATE. When we do remote call from CRM system for Z_SALESORDER_CREATE. Its given dump as follows:
Short text
    "Unable to interpret 2,00 as a number."
What happened?
    Error in the ABAP Application Program
The current ABAP program "Z_CREATE_ORDER_WITH_JOB_VRNT" had to be terminated
     because it has
    come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
    In the target system, a short dump has been written as well.
    More detailed information on the error cause can be found there.
Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "CONVT_NO_NUMBER"
    on the called page.
We are not using 2,00 anymore...it is something changed format while compiling..
It cause dump in R3 also..dump desc in r3 as follows
Unable to interpret " 2,00" as a number.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSTS4" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail bel
. The exception, which is assigned to the class 'CX_SY_CONVERSION_NO_NUMBER
was neither
caught nor passed along using a RAISING clause, in the procedure
"CONVERSION_EXIT_TSTRG_OUTPUT" "(FUNCTION)"
Since the caller of the procedure could not have expected this excepti
to occur, the running program was terminated.
The reason for the exception is:
The program attempted to interpret the value " 2,00" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
The exception must either be prevented, caught within the procedure
"CONVERSION_EXIT_TSTRG_OUTPUT"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Integers are represented in ABAP using a sequence of digits and, in so
cases, a preceding sign.
The system offers the following options for displaying floating point
numbers:
[sign][mantissa]E[sign][exponent]
[sign][whole number part].[fractional part]
e.g. -12E+34, +12E-34, 12E34, 12.34
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CONVT_NO_NUMBER" CX_SY_CONVERSION_NO_NUMBERC
"SAPLSTS4" or "LSTS4U01"
"CONVERSION_EXIT_TSTRG_OUTPUT"
Please help me to solve ths problem as soon as possible..
thanks in advance for you quick response.
Anutosh

Hi
Check your defined data types which you are passing to FM and exact FM data types.
I hope that's the problem .
Regards,
Sree

Data error (invalid data type 17) in a Remote Function Call

Hi,
I am passing 2 select-option tables to RFC.
Tables have structures -
   Table1 SIGN(C1)
               OPTION(C2)
               HIGH(C6)
               LOW(C6)
   Table2 SIGN(C1)
               OPTION(C2)
               HIGH(C20)
               LOW(C20)
At the destination side, I have created two table types which have same structure.
But when I call the RFC , program terminates with error - "Data error (invalid data type 17) in a Remote Function Call"
Not able to understand the reason for this error. Please help.
Thanks,
Sujeet

Hi,
check out this example
[LINK|http://abap.googlar.eu/viewtopic.php?f=5&t=28]
You have several ranges that you can use like RANGE_AUF.
Function example:
FUNCTION zexemple.
*"*"Interface local:
*" IMPORTING
*"     REFERENCE(R_HORA) TYPE FLAG
*"     REFERENCE(R_DIA_1) TYPE FLAG
*"     REFERENCE(P_IDOC) TYPE FLAG
*" EXPORTING
*"     REFERENCE(MSG) TYPE CHAR255
*" TABLES
*"      T_OIFSPBL STRUCTURE OIFSPBL
*"      SL_PBLNR STRUCTURE RANGE_PBLNR
*"      SL_MATNR STRUCTURE RANGE_MATNR
*"      SL_HORA STRUCTURE RANGE_UZEIT
*"      T_ERROS STRUCTURE ZARSTRING
ENDFUNCTION.
Report:
SELECT-OPTIONS: sl_pblnr FOR oirbpblb-pblnr,
                              sl_matnr FOR a361-matnr.
~
Final question:
You are passing the values using TABLES and not IMPORTING right?

Sql server configuration manager remote procedure call failed(0x800706be)

Hi,
My Sql Server Management Studio working well. But When I open Sql server configuration manager I Got an error
“Remote procedure call failed (0x800706be)”
I tried Goggling the problem and solve it but I am not getting any valuable
solution. Is anyone solve this problem
I attach snap here
MySql Server Details:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64) Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: )

This error appears to happen when .mof files (Managed Object Format (MOF)) don’t get installed and registered correctly during set-up. To resolve this issue, I executed
the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Regards,
Basit A. Farooq (MSC Computing, MCITP SQL Server 2005 & 2008, MCDBA SQL Server 2000)
http://basitaalishan.com
cau u pls tell me how to type this command on command prompt. I also have the same error in sql server 2008. I allready have sql server 2008 sp2 installed. When I was trying to type this command as it it by copying this full command to command prompt it
shows that command not found as follows
C:\>mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmpr
oviderxpsp2up.mof"
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
File 'C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2
up.mof' not found!
please tell me step by step
thanks
nravhad

Remote JNI_CreateJavaVM call

Similar Messages

Maybe you are looking for