Remote login: cannot connect to primary DNS server

To what should I set the DNS under 'Computers and Services'? I cannot get any computers (Mac or Win) to remotely connect to the network, it says cannot connect to primary DNS. The goal is to have users have access to home directories from remote locations but I cannot seem to get a connection. Help please...
Message was edited by: mrsmittys

Hi
A bit vague on details and I have to question why you would want to do this anyway? For example 10-20 users all accessing home directories remotely would be hard work if not practically impossible. What is the bandwidth on the host’s broadband service?
That said there are a number of ways of doing this the easiest being a VPN. Ideally a fixed public IP address at the site that the server is at and a router capable of supporting VPN connections. I’ve always found ZyXel Prestige 662 Routers and IPSecuritas (which is available free as a download – just remember to donate) a good combination. Once the tunnel has been built the remote client will be able to access any resource at the host site as if it was in the same building.
Again I would steer you away from this as the connection may prove to be unreliable depending on users and usage. A more workable solution would be Portable Home Directories. With PHD you can work with Home Folders without being connected to the host network. The Home folders would synchronize the next time the client connected to the network.
Are your home folders Open Directory networked home folders or just folders created that are defined as a paticular user’s folder? If its an Open Directory Networked Home folder then internal DNS Services configured and running somewhere would be absolutely crucial as Open Directory will not function without it.
I have to be honest and say I dont think you have really thought this through (no offense intended), however keep posting. No doubt others will offer views and opinions that may further assist you.
Tony

Similar Messages

Can´t communicate with the primary DNS Server 200.49.156.5: and now?

Hi,
I have connected a Sony Vaio with a Linksys WRT54G router, using broadband cable provided by a Motorola Surfboard Modem (model 5b5100i)
I followed all the steps from the router´s CD.
Finally I connected a network cable to the port 1 of the router and on the other extreme the Motorola Modem is now connected. As result, since I have a desktop already connected to the modem, there are now 2 connections on the back of the motorola modem, 1 for a desktop that uses its USB plug and a 2nd, which uses a network cable (ethernet connection) and that plugs at the end to the Linksys router. connection is ok based on the Linksys CD.
The wireless card of 2 different laptops recognize the router´s signal, but no internet copnnection is available.
after diagnostic on network problems by Vista Windows, I receive the following message
¨"Cannot communicate with the primary DNS Server 200.49.156.5"
What does it mean? what needs to be set in order to make it work?
Thanks in advance for any help

I talked to a tech support form my cable company and the motorola only provides 1 IP address, therefore, in order to make a router work (it will need its own IP address, a 2nd one), you need to buy an ADDITIONAL internet connection or access point....this company is in Argentina. While I lived in the US (last month) they allowed me to have multiple computers from the same one connection.
bottom line, calll your ISP and tell them you need either to install the router on your connection OR to have an additional internet cable input....
just my 2 cents...business rules.

Cannot connect to the Administration server?

I just installed Hyperion 11.1.2 in Windows 2008, and I'm sure the essbase server is started because I can connect by MaxL, and I can see the Administration server service is started because I can see it in the service list. But When I want to login ADM, error messageL "Cannot connect to the Administration server", please advise?
Error: java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
java.lang.NoClassDefFoundError: com/essbase/eas/utils/Environment
Error detail:
2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [WARNING] [] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] java.library.path=E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin;.;C:\Windows\system32;C:\Windows;E:\Oracle\Middleware\jrockit_160_14_R27.6.5-32\jre\bin;E:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;D:\app\serv_hyperion\product\11.2.0\client_1\bin;D:\app\serv_hyperion\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Intel\DMIX;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Activator\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Viewer\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\lib;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
[2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-00100] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] Unknown error occurred. See below stack trace for details[[
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
Edited by: user2571802 on May 8, 2010 2:01 PM
Edited by: user2571802 on May 8, 2010 6:52 PM

I too am getting the same error. When i click the validate 'Validate essbase connection' on the application wizard page, I get a blank page saying 'An errror occured'. I stop the planning service and restarted it from Start button. This time I got the error message
[ERROR] [HspCreateDatasource] - Servlet.service() for servlet HspCreateDatasourc
e threw exception <java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.libr
ary.path>java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at HspCreateDatasource.doCheckEssbaseConnection(Unknown Source)
at HspCreateDatasource.doHandle(Unknown Source)
at HspCreateDatasource.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF

Primary DNS server

Hello,
I am trying to setup a local primary dns server that will resolve local server names but at the same time forward request that it doens't have.
like i would like it to resolve our internal web address and still pull up google.com. I put in about ten records and all those work but when i try anything else it doesn't work. Can someone help?
Thanks,
Jay

What's different about 10.4.9 in this
case?
10.4.9 update "Addresses slow performance of non-cached DNS queries and provides an update to BIND version 9.3.2."
You may still prefer to add forwarders but, taking above on face value, no longer necesary for those who do not want to manually edit files.
Mind you, I have not actually tested the default DNS in 10.4.9 so cannot confirm that the previous problems do not still occur (but just to a lesser extent .
-david

I cannot connect to the adobe server.

I cannot connect to the adobe server and only have 7 days remaining before my photoshop stops working, my payments are up to date and the troubleshoot connectivity option does not work as the landing page is not available. Please help.

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Help, I cannot connect to iTunes update server.

I cannot connect to iTunes update server to check for updates for iTunes, or update my iOS version on my 2nd gen Ipod Touch.

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

Acrobat cannot connect to the Review Server

I've been invited to a shared review on Acrobat.com. When I download and open the PDF from the Acrobat.com invitation email, I get this error message:
Acrobat cannot connect to the Review Server: Adobe online services.
If I click the "Check for new comments" button in the upper right corner, I get this message:
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I can't see other reviewers' comments and can't post my own. I'm definitely online and connected, so not sure what's happening, but have had this error for several weeks now.
My system:
Acrobat XI Pro
MacBook Pro OS X 10.8.5
Safari browser 6.0.5
My Creative Cloud desktop app says Acrobat XI is up to date. I also have Photoshop CC installed.
I've tried logging into Acrobat.com with my Adobe ID before and after opening the PDF, nothing works. Also tried clearing my cache. Is there something in my Acrobat preferences that could be the issue?
Please help.
Thanks,
Mark

I am having a similar problem. The review was set up as a test. All our PC colleagues can access as normal. Our 2 Mac machines are not having luck.
Acrobat 10.1.8 Pro
Macbookpro OSX 10.8.5
Error: Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I'm guessing maybe a proxy issue?... what protocol/port is acrobat tryng to use?
(I tried process above with no luck)

TS1717 I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i wan to add them to my libra

I have older version of itunes on Windows Vista, when i check for updates it states it cannot connect to itunes update server even though i am connected to the internet, i have an iphone that has songs in the cloud and i want to add them to my library?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Cannot connect to the report server

I try to submit a report using RWCLIENT (see below), but getting the error:
"REP-0178 Cannot connect to the report server 'rep_M2003-056DVM_ora10gas' "
If I use URL, the report runs fine.
Please advise.
Thanks,
Dmitri
C:\OraDev10g\BIN\rwclient userid=user/password@database module=txr1020 batch=yes paramform=no DESTYPE=LOCALFILE desformat=pdf desname="M:\txr1020.pdf" AUTHID=ias_admin/iasadmin1 server=repser

We have Reports 10.1.2.
RWCLIENT (10g iDS) is installed on different machine.
On OracleAS I have started the Naming Service: namingservice.bat 14021
On client I updated the rwnetwork.conf with OracleAS hostname and 14021.
What is wrong? Maybe I need to start Naming Service using OPMN for report server to register.
Thanks.

ICloud says it cannot connect me to the server

I have lost the phone numbers in my contacts on my iphone 4S. I figured that using iCloud from my PC I would be able to recover them. When I try to sign in to iCloud from my PC, I get a message saying that it cannot connect me to the server. I can tell that my iCloud password on my phone is not correct but when I correct it, it reverts back to the old one. I can't figure out how to save it,and its the only thing I can see that might be preventing me access. I downloaded the latest version of iOS to see if that would help and it didn't. Any ideas?

I'm getting the same thing. I JUST bought mine too...
I was immediately sold once I played with it at the Apple Store but they forget to warn you there's a lot of setting up.
I'm tempted to go to an Apple store and tell them, I just wanna walk into my local coffee shop and be able to use their free wifi... what are the steps I need to take?
With my laptop all I have to do is turn on the airport and then I'm on the internet... with the iPod Touch seems like you have to go through **** and back - I started doing research on troubleshooting with iPod Touch, even called a person at the Apple store and then I see all these posts of routers, IP addresses, DCHP, reset settings and it's REALLY REALLY confusing for someone who's not that computer savvy - I thought Apple was user friendly. I really hope it's not that hard.
If you find results, please let me know. I've gone cross eyed from reading too much about this somewhat simple yet extremely complicated device.

BPC 75M - Modify Application error "Cannot connect to the Reporting Server"

I have trouble with Modify Application, also in ApShell. Maybe you have a clue what it can be the problem.
Configuration: single server BPC 7.5M SP3, Windows Server 2008 SP2, SQL Server 2008 SP2
Installation user is a domain user.
No errors during installation, no error in Server Manager diagnostics.
But when I try to modify an Application from BPC Admin it gives an error for step "Make OLAP database and Journal/Audit reports. / Validate dimension formulas.".
In tblLogs I see the error message:
==============[System Error Tracing]============== [System Name] :
AdminServerHandler [Message Type] : ErrorMessage [Job Name] :
AdminApplicationHandler : ExecuteModIfyApplication [DateTime] :
10/19/2010 1:19:13 PM [UserId] : MYDOMAIN\MYUSER
[Exception] DetailMsg : {System.Exception: Cannot connect to the Reporting Server at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.SetChangeDimensionForAudit(String strAppset, String strApp, String strUserID, Boolean blnIsChangedDimension, String& strErrMsg) at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.ExecuteModIfyApplication(String strAppSet, String strApplicationName, String strApplicationDescription, String strSourceApplicationType, String
strNewApplicationType, String strRateApplicationName, String
strOwnerShipApplicationName, String strCurrencyConversionsCalculation,
String strCalculation, String strIntercompanyBookings, String
strUSEliminations, String strOpeningBalance, String strValidations,
String strIntercompanyEliminations, DataTable dtDimensionList, Boolean
bReassignSQLIndex, Boolean bProcessApplication, Boolean bDeleteFact,
String strChangeAppType, String strUserID, String strReportBackID)}
==============[System Error Tracing End ]==============
Edited by: Alexandru Berindei on Oct 26, 2010 7:57 PM
Edited by: Alexandru Berindei on Oct 26, 2010 7:58 PM

There were problems accessing the web page   HTTP://server/reports
Error message:   "Reporting services 2008 user does not have required permissions"
It was possible to open the page HTTP://server/reports with local administrator user and I fixed this problem by performin following:
- add Content Manager right to bpc installation user
- disable UAC from Windows Control Panel > User Accounts
Still Modify Application gives the same "Cannot connect to Reporting Services".
I tried:
- check that BPC Installation User is part of Local Administrators
- reboot server
- reinstall BPC after disabling UAC
- reinstall everything except the Windows Server 2008
- I installed another computer with the same exact configuration but with a local BPC Installation User and it works.
Have anyone installed BPC 7.5M SP3 on single Windows Server 2008 SP2 , with SQL Server 2008 SP2 and with BPC Installation user a domain user?
Maybe you have an idea of what I should check next.
Thank you,
Alex

Cannot connect to the reporting server error

Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.

Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles

No trusted certificate found (91);Cannot connect to the LDAP server

HI All,
I am trying to connect to LDAP server with the following code.
JSSESocketFactory fact = null;
private LDAPConnection conn = null;
String keystore = "C:\\j2sdk1.4.2_15\\jre\\lib\\security\\cacerts";
System.setProperty("javax.net.ssl.trustStore",keystore);
fact = new JSSESocketFactory(null);
conn = new LDAPConnection(fact);
int ldapVersion = 3;//LDAPConnection.LDAP_V3; //defualt values of LDAP settings
private int ldapPort = 636;
LDAPAttributeSet ldapAtrbSet;
String ldapHost;
String loginDN;
String loginDN_Password;
And it is gicving me error :
Error: netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
     at netscape.ldap.factory.JSSESocketFactory.makeSocket(JSSESocketFactory.java:105)
     at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:418)
     at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:350)
     at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:244)
     at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:170)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1042)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:924)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:768)
     at com.reflexis.LDAP.LdapTestSSL.createConnection(LdapTestSSL.java:522)
     at com.reflexis.LDAP.LdapTestSSL.checkLdap(LdapTestSSL.java:118)
     at com.reflexis.LDAP.LdapTestSSL.main(LdapTestSSL.java:52)
Unable to connect to LDAP server
I have imported atr certificate also by using command:
"keytool -import -alias jag -file c:\x225.cer -keystore c:\j
2sdk1.4.2_15\jre\lib\security\cacerts"
I am running my java code from eclipse. And do i have to set any thing in eclipse for certificate. I Have imported certificate from command prompt.
Can any one please help me.It is very important for me.
Please its very urgent.
THanks,
Ankush Patni

As previously said network is a possible cause.Other things could be time on filer is too far off time on DC.AD object for filer has been deleted or change by a Windows admin.If all users are experiencing a problem, you may need to rebind it to AD - run CIFS setup at command prompt

Error : Cannot connect to the LDAP server

I have exported a file called "test1.ldif"
and then import in a new Oracle ldap server using the command:
ldapadd -p 389 -D cn="directory manager" -w <password> -f test1.ldif
But there is error "Cannot connect to the LDAP server".
Actually, I'm migrating the ldap data from 1 machine to another, please advise. Thanks

Check your ldap port, by default it is 4032...
--Bill

Remote login: cannot connect to primary DNS server

Similar Messages

Maybe you are looking for