Remote Management/ARDAgent

doing a disk permissions verification/repair i get
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
now i did notice a softwre update recently for Remote Management of the mac.....which i installed but i'm not interested in remotely controling my mac.
should i delete and how.
i am having boot issues and most of the time i have to boot holding down the shift key. also time machine is not backing up. i use it manually
and it just mostly circles for hours.
i was wondering if a corruption with Remote Management Connection could be causing the problem.
mac pro (intel) from 2006   running 10.7.4 snow leopard (can't install mountion lion on this computer).

step1
com.Logitech.Control Center.HID
com.Logitech.Unifying.HID Driver
com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0)
com.kensington.mouseworks.driver.VirtualMouse (3.0)
step2
com.microsoft.office.licensing.helper
com.bombich.ccc
com.adobe.versioncueCS4
com.adobe.versioncueCS3
com.adobe.fpsaud
step3
com.Logitech.Control
com.adobe.CS4ServiceManager
com.google.keystone.user.agent
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9
com.adobe.ARM.925793fb327152fd34795896fa1fb9ffa268b2a852256fe56609efa3
setp 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
iGlasses3.component
/Library/Extensions:
/Library/Frameworks:
AECore.framework
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
Compressor.framework
EWSMac-GC.framework
EWSMac.framework
FxPlug.framework
MediaServerAPI.framework
Motion.framework
NyxAudioAnalysis.framework
PluginManager.framework
PrintMeSSL.framework
ProFX.framework
ProMetadataSupport.framework
Qmaster.framework
QtCore.framework
QtGui.framework
QtXml.framework
TSLicense.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
AmazonMP3DownloaderPlugin.plugin
Disabled Plug-Ins
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.Logitech.Control Center.Daemon.plist
com.adobe.CS4ServiceManager.plist
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.adobe.versioncueCS3.plist
com.adobe.versioncueCS4.plist
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Apple Qmaster.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
Logitech Control Center.prefPane
VersionCue.prefPane
VersionCueCS3.prefPane
VersionCueCS4.prefPane
/Library/PrivilegedHelperTools:
Google Drive Icon Helper
com.bombich.ccc
com.microsoft.office.licensing.helper
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProRes422.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX Decoder.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
Motion.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
/Library/Spotlight:
Microsoft Office.mdimporter
iMovie.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
AdobeVersionCue
FxLicenseManager
ProTec
Qmaster
RetroRun
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
YMsgrCallABPlugin.bundle
YMsgrMsnABPlugin.bundle
YMsgrSmsABPlugin.bundle
YMsgrYimABPlugin.bundle
Library/Fonts:
.DS_Store
Contempory___Modern_Font_by_MyFox.ttf
HypatiaSansPro-Black.otf
HypatiaSansPro-Bold.otf
HypatiaSansPro-ExtraLight.otf
HypatiaSansPro-Light.otf
HypatiaSansPro-Regular.otf
HypatiaSansPro-Semibold.otf
QuickBooks Fonts
SPETETRIAL.ttf
stamped.TTF
Library/Frameworks:
EWSMac-GC.framework
Library/Internet Plug-Ins:
CitrixOnlineWebDeploymentPlugin.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.925793fb327152fd34795896fa1fb9ffa268b2a852256fe56609efa3.plist
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.9040F954-3BE6-4466-BC53-B92 1D2ECDA93.plist
com.apple.SafariBookmarksSyncer.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
.DS_Store
Perian.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/Services:
ToastIt.service
step5
nothing happened after i copied and pasted
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null

Similar Messages

  • Remote Management: ARDAgent crashes before and after sleep

    If Remote Mangement is turned on, ARDAgent crashes the second you put the computer to sleep. It then takes 40 seconds (way too long to not confuse the users) until it sleeps.
    Awaking happens in reasonable time but ARDAgent crashes again.
    ARDAgent was reinstalled, caches cleaned, plist trashed.
    Thread 0 Crashed:
    0 com.apple.RemoteDesktopAgent 0x00024fa8 0x1000 + 147368
    1 com.apple.RemoteDesktopAgent 0x00063db1 0x1000 + 404913
    2 com.apple.RemoteDesktopAgent 0x0005c4c9 0x1000 + 373961
    3 ...ple.CoreServices.OSServices 0x917ce98a sleeplistenercallback + 219
    4 com.apple.framework.IOKit 0x933cfaca IODispatchCalloutFromCFMessage + 337
    5 com.apple.CoreFoundation 0x91dac535 __CFMachPortPerform + 117
    6 com.apple.CoreFoundation 0x91dd0901 CFRunLoopRunSpecific + 3921
    7 com.apple.CoreFoundation 0x91dd0cf8 CFRunLoopRunInMode + 88
    8 com.apple.HIToolbox 0x96effda4 RunCurrentEventLoopInMode + 283
    9 com.apple.HIToolbox 0x96effbbd ReceiveNextEventCommon + 374
    10 com.apple.HIToolbox 0x96f5e5f2 _AcquireNextEvent + 58
    11 com.apple.HIToolbox 0x96f5cd4f RunApplicationEventLoop + 207
    12 com.apple.RemoteDesktopAgent 0x00002d02 0x1000 + 7426
    13 com.apple.RemoteDesktopAgent 0x00002c5a 0x1000 + 7258

    You should probably post your question in the ARD forums:
    http://discussions.apple.com/forum.jspa?forumID=1007

  • Back to My Mac / Remote Management / Screen Sharing

    I'm managing computers for my family spread across 3 states. I would love to get screen sharing working but it's just not happening. I've tried the steps in the following KB article and that's allowed me to access two mini servers (one 10.7 and one 10.6.8) at home. However, I can't access a MBP at home and I can't access my family's computers (via screen sharing) at all. Here's the KB article...
    http://support.apple.com/kb/HT3486
    Here's all I'm seeing (5 computers are "missing")
    I've tried NAT port forwarding (Airport Extreme/Time Capsule) for "Apple Remote Desktop" to the computers internal IPs on ports 5900 & 3283. I've tried it without. I've tried both "Screen Sharing" and "Remote Management" in preferences. I've made sure I have my own account with admin privledges on all machines etc. This is, of course, all peppered with the occasionaly outburst of foul language...
    What am I missing?

    Spoke with Apple who spoke with Apple and so on. Tech support for Apple Desktop Remote acknowledges (as best they could) that there is a bug/ problem. Yes, reverting to an older (3.5 - 3.4 ARDagent) solves the problem (short term ?). They captured my OS info and will get back to me in 3-5 days - how do you like them apples! So, revert to ARDagent 3.4 and you can remote connect - may try this later... will post if it works. Here's what's been posted on this: https://discussions.apple.com/thread/3192451?start=0&tstart=0

  • Script that enables Remote Management and adds user

    I need to make a script that can enable Remote Management and add a user to control it.
    I have tried to watch which plist files it uses so I could edit those.
    It writes some text in com.apple.RemoteManagement.plist and com.apple.ARDAgent.plist bit I can't find where the user is added.
    Any ideas guys
    Thanks

    No need to mess around with .plists. ARD has a command-line admin tool. The syntax is a little funky, but this should give you an idea:
    $ sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -users john -restart -agent -privs -all
    This is all covered in more detail in Apple's technote.

  • How to manage Remote Management settings with Snow Leopard Server

    At my business, I manage our Macs' preferences using Managed Client as part of Mac OS X Server 10.6... one thing I have not been able to figure out is how to enforce settings for Remote Management. For example: I want only the administrator user to be able to control a machine, and only run reports but not copy software, etc.
    I have tried configuring a machine correctly, then importing com.apple.RemoteManagement.plist and com.apple.ARDAgent.plist into Workgroup Manager. No luck. I wonder if anyone out there has solved a similar problem.

    Open the Server Admin program (in the dock if nowhere else). It's there.

  • Keeping remote management from being turned off.

    Anyone know of a set of commands that will keep remote management turned on in sharing preferences.
    I monitor a network and the users need full admin access. However they like to turn off the remote management preference.
    Any assistance would be appreciated.

    Antonio is on the right track.  Unfortunately, if you give your users admin access they can undo anything.  This is what I do in Terminal, and so far, no one has been determined enough to disable it:
    sudo crontab -e
    */30 * * * * /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -access -on -users administrator -privs -all -restart -agent -menu
    Assuming you know how to adjust a cron job, you can have it fire off at whatever interval you'd like.  The example above restarts Remote Management every 30 mins.  They may go in and turn it off a few times, but in my experience they just give up after a few times.

  • Remote Management and Screen Sharing hang on activation

    Hi,
    I'm trying to activate Remote Management using the Sharing System Preferences pane (http://images.macfixit.com/images/ScreenSharingFigure2.jpg) but after I click the checkbox, the whole System Preferences dialog becomes unresponsive and I have to kill it. I get the same behavior when trying to activate Screen Sharing too.
    Remote Management starts fine with the kickstart command:
    sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate
    Any idea what's going on?
    Thanks!
    florin

    This doesn't appear to be a question about Apple Remote Desktop, which is a separate package for managing networked Macs, so you may want to take this up in the Mac OS X 10.5 Networking forum. But yes, as long as you can get the network set up correctly on both ends, you can share a screen from anywhere in the world. Using iChat's screen sharing feature usually works out better when working from a mobile Mac, though; fewer issues with routers and firewalls. LogMeIn is another service that many people have reported using to good effect.
    Message was edited by: Dave Sawyer

  • Guide to remote manage Hyper-V servers and VM's in workgroups or standalone

    This guide is based on the following 3 products:
    Windows server 2012 (core)
    Windows 8
    Hyper-V server v3 / Hyper-V server 2012
    The following guide will enable you to:
    1: remotely manage your Hyper-V Virtual Machines with Hyper-V manager
    2: remotely manage your Hyper-V servers' firewall with a MMC snap-in.
    3: remotely manage your Hyper-V server (2012) with server manager
    ! This should also work for Core installations of server 2012, but I haven't tried.
    This guide is purely focussed on servers in a WORKGROUP, or as a stand alone.
    I CAN NOT tell you what you need to do to get it working in a domain.
    * You can run these commands straight from the console (Physically at the machine) or through RDP.
    * You will need to be logged on as an administrator.
    * Commands are listed in somewhat random order; I do however advise to follow the steps as listed.
    * Commands with ? in front of them are only ment to be helpfull for troubleshooting,
    * and to identify settings and changes made.
    * Commands and instructions with ! in front of them are mandatory.
    - server: means the server core or hyper-v server (non gui)
    - client: means the machine you want to use for remote administration.
    - Some commands are spread over 2 lines; be sure to copy the full syntax.
    > To enable the Hyper-V manager to connect to your server, you need to perform the following 2 actions: (Assuming you have already installed the feature)
    1:
    ! Client: Locate the C:\Windows\System32\Drivers\etc\hosts file.
    ! right-click --> properties --> security
    ! click --> edit --> add --> YOURUSERNAME or Administrator --> OK
    ! then select this new user, and tick the "modify"-box under the "allow"-section.
    ! apply the change, and close.
    ! doubleclick the file, and open with notepad
    ! add the ip-address and name of your server (no // or other crap needed)
    ! Save the file
    # I recommend putting a shortcut to this file on the desktop.
    # If you change the ip-address of your server (e.g. move the server from staging to a live environment)
    # you might forget to do so in the hosts file.
    # Hyper-V manager, MMC, RSAT, and Server-manager all rely on the hosts-file to resolve the name.
    # some of these might connect to their respective service on an i.p.-level, but some don't.
    # This is the main reason you need to modify this file.
    ! USE AN ELEVATED CMD/POWERSHELL PROMPT TO CONTINUE !
    # the next config needs to be done on windows 8.
    # It seems that it's already preconfigured under server 2012
    2:
    ! Client: dcomcnfg
    ! open component services --> computers
    ! right-click -> my computer -> properties
    ! select "COM SECURITY" tab
    ! under "ACCESS PERMISSIONS" select "edit limits"
    ! select "ANONYMOUS LOGON", and tick "remote access" under ALLOW
    # Without this adjustment, you can't connect to your Hyper-V server
    # with the Hyper-V manager if you're not in a domain.
    > And if you haven't done so already... make sure you have enabled remote management number 4 on the Hyper-V server console.
    > Next, is to get the MMC firewall snap-in working.
       The reason for this, is to have a GUI available to configure it.
       If you're happy without it, you may skip this and use a shell instead to do so.
    ? server: netsh advfirewall show currentprofile
    # shows the current profile (public/domain/private) and its settings
    # depending on your needs, you should set the right profile to fit your needs.
    # You can easily do this when the MMC snap-in is done. (after you've followed these steps)
    ! server: netsh advfirewall set currentprofile settings remotemanagement enable
    # enables remote management of the firewall on an application level 
    # (In other words: allows the firewall to be remotely managed)
    ! server: netsh advfirewall firewall set rule group="Windows Firewall Remote Management" new enable=yes
    # allows remote management of the firewall, through the required firewall ports with TCP protocol.
    # 4 rules will be updated to allow access: public & Domain, dynamic and endpoint-mapper.
    # You can disable/add/change the rule from the MMC snap-in after finishing this guide.
    # e.g. set the firewall through the MMC-GUI to only allow specific ip-addresses etc.
    ? server: netsh advfirewall firewall show rule all
    # Shows a list of available rules, and their current state.
    # when run from cmd, the list exceeds the maximum length for review.
    # (from cmd,type:) start powershell, and run the command from there.
    ! Client: cmdkey /add:YOURSERVERNAME /user:USERNAMEONTHESERVER /pass:THEPASSWORDOFTHATUSER
    # I recommend you to use a username with enough privileges for management
    # All capital letters need to be replaced with your input
    # CMD answers "credential added successfully" when you're done
    ! Client: locate MMC, and run it as an admin.
    # In windows 8/2012, go to search and type MMC. Right-click the icon, 
    # and choose run as admin on the bar below.
    ! Client: application MMC: select "file" --> Add/remove snap-in 
    ! --> (left pane) scroll down to "windows firewall" --> select and click "add"
    ! select "another computer"
    ! type the name of the server you want to manage (NO workgroup/ or //, just same name as you typed for cmdkey)
    * Part 2 is done.
    # Have a look by doubleclicking the firewall icon in the left pane.
    # It looks and works the same as the GUI version that you are familiar with.
    ! Next is the Server Manager.
    # Follow the steps listed to get your server listed and manageable in the server manager.
    ! Client: Open the created Firewall snap-in for your server.
    ! Find the 3 "Remote Event Log Management" entries in the list of INBOUND rules, and enable them.
    ! Open powershell --> in cmd windows, type: start powershell
    ! run the following line in powershell
    ! Client: in C:\Windows\system32> set-item WSMAN:\localhost\client\trustedhosts -value YOURSERVERNAME -concatenate
    # WinRM Security Configuration.
    # This command modifies the TrustedHosts list for the WinRM client. The computers in the TrustedHosts list might not be
    # authenticated. The client might send credential information to these computers. Are you sure that you want to modify
    # this list?
    # [Y] Yes  [N] No  [S] Suspend  [?] Help (default is "Y"): y
    # I recommend to choose yes; unless you like to pull some more hairs...
    ! server: winrm qc
    # WinRM service is already running on this machine.
    # WinRM is not set up to allow remote access to this machine for management.
    # The following changes must be made:
    # Configure LocalAccountTokenFilterPolicy to grant administrative rights remotely
    # to local users.
    # Make the changes? y / n
    !  select yes
    ! Client: open the server 2012 server manager
    ! click manage -> add server
    ! select the DNS tab, and type the name of your server
    Done.
    You can now manage your remote server through the familiar computer management GUI.
    ! Right-click your remote server, and select "Computer Management"
    A few side notes:
    ? The Performance tab seems to list the local machine's performance, in stead of the remote servers'
    ? If you want Windows server backup, you need to right-click the server in the server manager, and select "add roles and features.
    ? it will then become available under the "computer management" of the remote server.
    If you liked this guide you may thank my employer, Mr. Chris W.
    for giving me the time to work it all out.
    Cheers!

    As a little update to the post, I'd like to add that replication, clustering and migration will not work in workgroup environments. Unless someone can provide an additional guide for this, I'd recommend anyone to no even bother to try.
    To manage the standalone hyper-v server in a remote location over the internet, I would recommend the following:
    Install windows 8 pro (x86 uses less resources!) as a vm on the host, and assign 2 network connections to it.
    1 external (shared with host) (be sure you have a dedicated ip-address for it!)
    1 internal connection.
    What I did was this:
    As soon as you've installed the win8 guest, proceed with the guide as described.
    For the 1st step of the guide (hosts-file) use the ip-address you will later assign to the "internal" network switch of the host!
    In my example, I'm using 10.0.0.1 for the host, and 10.0.0.2 for the guest.
    To be clear: I first used the guide on a LAN-environment, and did all the steps from a "real" client to server on the LAN.
    Then, installed the win8 guest on the host using the "real" clients' hyper-v manager over the LAN.
    Next, assigned the 2 network connections to the VM, and configured them as follows:
    external - as you would to be able to make your guest reach the internet.
    internal - I used the following config:
    ip-address: 10.0.0.2
    subnet: 255.255.255.252
    gateway - blank
    dns - Blank
    Now, when you get to the console of the hyper-v server (host) or RDP to it, go to network settings.
    You'll see that the internal card has been added here as well.
    Configure it as follows:
    ip-address: static - 10.0.0.1
    subnet: 255.255.255.252
    gateway - blank
    dns - blank
    You should now be able to ping your guest (win8) on 10.0.0.2 if it's running.
    Don't forget to enable ping response (option 4 on the host) to test connectivity the other way around as well (guest to host)
    When you're done, you'll be able to RDP to the guest OS over the internet, and then connect to the host with server manager, hyper-v manager, and MMC.
    Don't forget to enable each module on the hosts' firewall to make the snap-ins work!
    Remote volume management requires your guest/client firewall INcoming ports to be enabled as well! not just the host.
    Either update the firewall rules from the MMC gui as described in the guide, or use the following commands on the
    hosts' powershell:
    Enable the firewall rules with the command Enable-NetFirewallRule -DisplayGroup "USE_THE_COMMANDS_BELOW" (include the " " in the command)
    Remote Service Management
    Remote Volume Management
    Remote Event Log Management
    Remote Scheduled Tasks Management
    Windows Firewall Remote Management
    Windows Remote Management
    You can get the list with Get-NetFirewallRule -DisplayName *management*
    You can get the list with Get-NetFirewallRule -DisplayName *remote*
    Commands provided with credits to F. verstegen
    Cheers,
    Michael.
    Sigh...

  • How can i prevent users to delete remote management on their IPADs

    hello everyone
    i have Mac with OS X server i have created profile manager to manage the students I Pad's
    students keep deleting the profile remote management profile
    anyway to help me to manage their I PADS remotely 

    When configuring a profile in Profile Manager, if you edit the General entry you can set it to require a password before allowing a user to remove the profile. If you don't give users this password then they will not be able to remove it.

  • Screen sharing and remote management no longer working after some uptime

    Server is withoiut monitor.
    Users need to login via screen sharing from time to time.
    "Enable screen sharing and remote management" is ticked in Server.app everything is working fine (for days, weeks).
    ARD reports "Screen Sharing Available", so remote management is not running how it should.
    Screen Sharing.app is "Connecting…" forever.
    Kickstarting ARD (http://support.apple.com/kb/HT2370) does not help.
    Restart fixes it.
    Is there a workaround (over ssh) or a fix?

    seduc wrote:
    Do you know if
    fdesetup authrestart
    works then too?
    Off-hand, no.   I don't.  See this posting, or as would be typical in any case, try it?

  • Screen Sharing and Remote Management

    Is there a way in 10.6 to make both Screen Sharing and Remote Management run at the same time?
    In the past (10.5), you could convince Mac OS to run both Screen Sharing and Remote Management to run simultaneously. I say "convince" because you could not enable them both through System Preferences. You could turn one on, then use Terminal to enable the other. This worked great for me, because I needed remote management for the machines I managed, and the users need screen sharing to work from home.
    However, the work-around for 10.5 no longer seems to work for 10.6. Has any one gotten this to work yet for 10.6? Thanks!

    I figured this out. First enable Remote Management via System Preferences. Then create /private/etc/ScreenSharing.launchd with 'enabled' as it's contents.

  • Mountain Lion Server: add network user to remote management

    Hi,
    So recently I have upgraded from Lion Server to ML Server. A little disappointing, but whatever, I've moved on and got everything almost back to where I had it with Lion.
    My last few issues I believe are related but can't quite figure it out. In Lion I have an admin profile and then a network user profile that I used on my MBP bound with AD. I'm at the stage where my nre network user can log in on the server machine but I can't log in as the network user via screen sharing. I can't add a network user to Remote Management, and with Remote Management enabled Screen Sharing is greyed out. I'd really like this to work.
    My second problem is that I can't bind my MBP to the server but even when bound the network user account can't log in.
    Any body have  any ideas?
    Thanks!

    I had this problem on a clean install.
    The solution was incredibly simple for me, but only  after I saw Ross.M's note about opening the Users & Groups settings panel (in the OS System Prefs, not in server) and rebinding to OD server under Login Options.
    That was not the solution for me, but under Login Options I discovered a previously unnoticed pref for "Allow network users to login at login window."  I had this option set (apparently by default) to "Only these network users:"  but with an empty list.  Adding my users to the list made it work perfectly.
    Talk about KISS

  • Remote Management Config on NetInstall

    Hello.
    Is it possible to configure the Remote Management of a system when creating the Netinstall image? Say for example I install 100+ systems, I don't want to hook each one of these into a screen and manually configure Remote Management.
    Any advice or pointers on things to read up on would be great.
    Thanks.

    Hello.
    Is it possible to configure the Remote Management of a system when creating the Netinstall image? Say for example I install 100+ systems, I don't want to hook each one of these into a screen and manually configure Remote Management.
    Any advice or pointers on things to read up on would be great.
    Thanks.

  • System Image Utility - Create User - Activate Remote Management

    When creating an image with system image utility, based on a DVD image instead of a cloned image, I cannot create a user and activate Remote Management.
    I have created an installer package with Apple Remote Desktop that is supposed to do both, however it doesn't work. I do not get an error, but no user is created.
    I have tried a post-install script however the dscl command is not recognized even if I put the path /usr/bin/dscl.
    I even tried to use a popular package out there called "createUser" but that fails as well.
    Has anyone had any luck with this when trying to make a moduler image with System Image Utility?
    Message was edited by: NeedSomeAnswer

    After configuring all the appropriate settings, I
    push the "Create" button and it appears to start
    working, prompts me for a location to save the actual
    image itself, creates a folder with the default name
    and then nothing happens.
    ok here's the deal: i created a folder in my OSX server home directory labelled "images" and keep our multiple images there. although you CAN have your images on other drives or on the network, that would take a LOOOOOOOONG time to do the data transfer to the invisible netboot folder on your server. my advice: keep local copies of all images. save a ton of time for yourself, eh?
    then, when it's time to use the system image suntility to load up an image, i go to that same location each time, call it up and have the app set to the prefs i want or need. i'm on 10.4.7 server and have had no problem using the software.
    so try using images locally and then, if that doesn't work, upgrade to 10.4.7

  • Error while running Remote Manager for OIM11gR2

    Hi,
    I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
    C:\RemoteManager\remote_manager>remotemanager.bat
    C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
    C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
    C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
    C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
    C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
    1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
    dules\oracle.jrf_11.1.1\jrf-api.jar
    C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
    b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
    gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
    l.remotemanager.RemoteManager
    Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
    INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
    ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
    INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
    Exception in thread "main" java.lang.NullPointerException
    at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
    at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
    at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
    at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
    at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
    at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
    at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
    at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
    at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
    at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
    at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
    at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
    C:\RemoteManager\remote_manager>
    Any suggestions?

    Hi,
    I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
    C:\RemoteManager\remote_manager>remotemanager.bat
    C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
    C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
    C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
    C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
    C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
    1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
    dules\oracle.jrf_11.1.1\jrf-api.jar
    C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
    b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
    gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
    l.remotemanager.RemoteManager
    Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
    SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
    INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
    ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
    Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
    INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
    Exception in thread "main" java.lang.NullPointerException
    at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
    at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
    at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
    at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
    at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
    at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
    at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
    at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
    at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
    at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
    at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
    at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
    C:\RemoteManager\remote_manager>
    Any suggestions?

Maybe you are looking for

  • Airport Utility not recognizing Time Capsule after Airport Extreme Update08

    After installing the Airport Extreme Update 2008 my Time Capsule keeps crashing. I have powered down both my DSL modem and the Time Capsule, done a hard reset of the Time Capsule and yet it continues to flash amber lights. Yesterday, after hours of r

  • Two choices for System Selection in SMD Setup Wizard

    Hello, we started to install the SMD. First everything was fine, but now we can select two agents for one system in the setup wizard. The correct system is green lighted because the setup was successful. The other wrong system is not configurd and so

  • Registering ipod shuffle

    The screen does not allow me to move left or right,so i'm unable to veiw all options.

  • IMac G4 compatibility with Epson Pro 3800

    recently put downpayment on Epson Pro 3800 printer, all advertising said it will work with os 10.4.x, but on further buried research, they "recommended" a G5, or intell etc. will this Epson work on my iMac G4

  • Loads of Queues question

    The current system I am working on has over 100 queues in a cluster.           I'm just trying to accomplish the same steps that I have in my pre-JMS           MQ code in the JMS way. I want to be able to connect just to our main           cluster se