Remote metadata entry?
I recently finished scanning a few hundred slides for my dad and have loaded the scans into Aperture for cropping, color correction, and other edits.
Is there a way that I could send him reduced-side versions of the images, have him add metadata, and import it back into Aperture?
Thanks,
Andreas
Yes. Go to File>Export>Versions or Masters depending which you want to export. In the drop down menu's export preset choose the ones that you want to send him. I would choose JPEG (either the 50% or the fit within 1024× 1024).
Similar Messages
-
Remote monitoring entry in SOLMAN
Hi ,
I am trying to create Remote monitoring entry in SOLMAN but after I create and save , it says entry is saved in secure area but dos not reflect in system topology.
It give me the following message after save :
ECD_RZ20_COLLECT_072949Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Please advise
thanks
Regards
AditiHi Aditi,
Is your issue solved ?If so please let me know.. i am also facing the same issue .
Thanks in advance..
Srini -
RFC error while adding an remote monitoring entry to CEN
Hi,
I am trying to add an remote system to CEN by RZ21 i.e.
in RZ21 -> Technical Infrastructure -> Configure Central system -> Create Remote Monitoring Entry
But while testing RFC connections before saving, it giving following erros :
SC4_RZ20_COLLECT_195119Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
Are these errors of any concern?
or shall i go ahead and save the entries?
Please suggest.Hi,
ssue has been fixed after following
SAP Note 1453112 - CCMS agent and kernel: patches 2010
1:) Here we first performed kernel upgrade then re register agents as per note.
2:) While for mentioned error during remote monitoring entry we checked in path
Tcode-> sm59-> TCP/IP connectiones -> then in RFC destination SAPCCM4X.<SID>.<instance no> and found destination information was not correct so we corrected as
SAPCCM4X.<monitoring system id>.<instance no> then
then perform remote monitoring entrory steps via RZ21 and issue got resoulved -
Solution to Lightroom 3 slow metadata entry?
Hi, I've reported this as a bug, but I hope someone has a workaround.
Metadata entry in Lightroom 3 is VERY slow (wasn't a problem at all in Lightroom 2). When I enter a field (not all fields but most of them) the scrollbar goes down and then back up - a second or two. The field that was selected (tab from previous entry) is no longer selected. If I am not very careful and wait for Lightroom to do it's thing and then select a field, any data entered is interpreted by LR as a command (so typing in 'dr', for example, will go to develop/crop).
Can anyone (including Adobe staff, please) help? This is a very serious problem for us as we have a great deal of meta data to enter.
Thanks!!Hi,
I'm running Windows XP, Intel XeonCPU 3.00GHz, 3GB RAM. On the whole LR3 is faster than LR2 (sliders for example). There is no problem with CPU or memory usage - plenty available even though this is not a fast machine. I have loads of disk space and not at all fragmented.
My only real problem is metadata entry. I have tried it with small files and very little metadata and v. large files with lots of metadata. The biggest difference is when there is a lot of metadata, but the symptoms are the same: tabbing to the next field mostly does not move to the next field: what happens is that the metadata slider goes down then back, taking some time (1 or 2 seconds) and the next field is not selected. So any data entry during this time gets interpreted by LR as a command to LR - which means that I have to be very careful to enter data, wait, select the next field and then enter the data.
I have optimized the catalog (more than once!), turned off auto write to xmp and it makes no difference.
I would really like to know if this is a problem with my system only, or if this is a general problem. As I mentioned, LR2 did not have this problem at all. I will install LR3 on a different machine and see if I get the same problem and I'll report back. -
Solution Manager Create remote monitoring entry
Hello,
I need some help or clarification please. We just upgraded our Solution Manager to EHP1 spk25 and I'm trying to setup Solman to support central system monitoring. I'm on the last step to enter the moitored ABAP system in CEN through RZ21 Techincal >Configure Central System>Create remote monitoring entry.
I can enter my own System ID but can't enter the RFC destination ? These default to *_RZ20_Collect and *_RZ20_Analyze. I want to use the RFC's already in place through Charm since these are already setup and working correctly. Can someone tell me how to change this or why we have to use the defaults.
Thanks in advance
StephaniePlease disregard.
Thanks -
Are there any ways to speed up metadata entry for AVCHD and MXF footage?
I've got 17 cards in my hands, each card has up to 200 shots on it. I like to add the card number as the tape name as well as add the scene etc.
Adding the tape name manually to a couple of thousand shots is tedious at best. For 5D2 footage I use bridge to highlights all clips, add the tape and scene and rename files (to be unique names) prior to import. This doesn't seem possible with AVCHD & MXF.
So, how to add the tape name to all 200ish files per card without doing it one file at a time in the Project window? Are there any third party plugins that can help with this? Is this even possible ia the SDK (I'd write it if it doesn't already exist!) ?
Thoughts? This is going to take several hours for something that takes only a couple of minutes in Bridge for Canon .mov files and ProRes
How do 'you' optimise 'your' metadata entry time?This camera does not appear to record timecode. All clips have timecode set to 00:00:00:00, however the dynamic info shows the Shot Time as a valid time and date.
While we could sort on the Shot Time, the other camera has time code, but not Shot Time in the metadata panel. So, they are mutually exclusive in terms of sorting on the time of day the clips were shot.
It would be nice to get either one of them to have entries for all cameras, rather than some havin timecode and others having shot time, but neither having both.
I'm really not worried about being frame accurate, we use PluralEyes for syncing when we're all shooting the same thing, but being within at least a few minutes of the correct time lets us sort things chronologically from several different camera operators. It makes it easy to find things like a person arriving in a car outside, walking in the front door, arriving at the ceremony room. Without timecode (or at least an indication of time) we have to go digging through potentially hundreds of clips looking for this sequence taken on different cameras.
Hopefully that makse sense? -
Which metadata entries does HDR assembly function need?
I am using a digital back at Hasselblad 500 C/M. The 3FR files of course do not contain all metadata that are needed for HDR assembly in Lightroom. I have compared the missing metadata in the XMP file with a 3FR file of a Hasselblad HD4 camera (which works well with HDR assembly in Lightrrom) and added the missing EXIF metadata manually with ExifTool to the XMP files: exif:ApertureValue, MaxApertureValue, SubjectDistance, FNumber, ShutterSpeedValue, ExposureTime, ExposureProgram. But still Lightroom gives error message of missing metadata.
Does anyone know which metadata entries in XMP files are needed to perform HDR assembly in Lightroom?Yes. Here is the full XML exif contents of the file:
-
Problem adding Remote multisite Entry Point
Hi, we have DirectAccess 2012 setup for multisite with a default site with 2 DA servers with load balancing in Sweden, one DA server in Phoenix (US) and one in Romania. For the US one i had to change the entrypointDC after i had added it since otherwise
i could not use the RemoteAccess management console.. everything just hung when it could not load the configuration.. i guessing it timed out.. getting the config from the US AD server and that broke everything (hmmm...)
I am now trying to add another entry point in the US (not the same site) but cant get past "adding an entry point... Please wait while the configuration is applied.." i have waited a couple of days.. it dos not get past that.
I wanted to try the powershell command for adding a entry point to but i cant find any info on how to specify the different GPO:s correctly.. i have Windows 7 computer to so i need a server GPO , a client GPO and a windows 7 group.. and i have not
been able to figure out how to do that..
Or if its possible to change a entrypointDC while adding the entrypoint.. so it wont time out.
Anyone have any smart tips ?
BR
DanielHi Daniel,
Please try to follow the guide below,
Deploy Multiple Remote Access Servers in a Multisite Deployment
http://technet.microsoft.com/en-us/library/hh831664.aspx
Besides, is there any warning or error in the event viewer?
Best Regards.
Steven Lee
TechNet Community Support -
Metadata entry screen improvements
Right now the Caption entry field on the metadata panel is limited in width,
wraps text unpredictably and is a bit hard to work with. Hitting the enter
key does not place a carriage return, it causes you to exit the field.
There seems to be no way to enter a carriage return to begin a new line.I've tried all the options (WinXP) - shift-enter, CTRL-enter, ALT-enter etc. an they all seem to accept the form rather than insert a carriage return - are we limited to one continuous line of text? (Text Template editor)
-
Hi All,
I understand, Microsoft file sync provider metadata file is nothing but a Microsoft CE database, which cannot grow beyond 4GB. I also came to know that this metadata file is nothing but entries (aka details) of the files in the file system.
Does anyone know, how many entries would this knowledge file could contain considering only file additions ? (forget about updations and deletion tracking).
vinay kasireddyhave a look at this
sample file sync provider for blob store, this should give you an idea of what's actually stored as metadata. -
Remote Page entry in Skin editor navigation
Within my RoboHelp X5 project, there is a "Remote Page" Skin
entry ( below the topics) to Yahoo. When I click on the Navigation
Page of the skin editor, there is no entry in the Remote URL field,
so I don't know how this link became part of my project. Please
help; I need to remove it asap.I think this is just an example in the skin editor, and not
part of your actual project at all. You can generate your project
and look at the actual output to make sure.
G -
Script sharing: reading remote registry entries
Hopefully of use for someone else. I had to write this up to create a report of versions for all of our middletier servers.
Cheers,
Greg Webster
Code:
' Read remote registries for Zenworks 7 installs
' Greg Webster
' ==============================================
strComputer = InputBox( "Server name: " )
Const HKEY_LOCAL_MACHINE = &H80000002
Set objRegistry = GetObject("winmgmts:\\" & _
strComputer & "\root\default:StdRegProv")
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfD"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "ZfD is " + strValue
strZfDVersion = "ZfD is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfD\App Management Server"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "App Management Server is " + strValue
strAppMgmtVersion = "App Management Server is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfD\Imaging Server"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "Imaging Server is " + strValue
strImgVersion = "Imaging Server is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfD\Middle Tier Server"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "Middle Tier Server is " + strValue
strMTSVersion = "Middle Tier Server is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfD\PXE Server"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "PXE Server is " + strValue
strPXEVersion = "PXE Server is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfD\Workstation Import Server"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "Workstation Import Server is " + strValue
strWkstnImpVersion = "Workstation Import Server is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfS"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "ZfS is " + strValue
strZfsVersion = "ZfS is " + strValue
End If
strKeyPath = "SOFTWARE\Novell\Zenworks\ZfS\PDS"
strValueName = "Version"
objRegistry.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,strValueName,strValue
If IsNull(strValue) Then
Wscript.Echo "The registry key does not exist."
Else
'Wscript.Echo "PDS is " + strValue
strPDSVersion = "PDS is " + strValue
End If
Wscript.Echo "Registry entries for " + strComputer + ":" + VBCr + strZfDVersion + VBCr + strAppMgmtVersion + VBCr + strImgVersion + VBCr + strMTSVersion + VBCr + strPXEVersion + VBCr + strWkstnImpVersion + VBCr + strZfsVersion + VBCr + strPDSVersionGregWebster,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Not able to Create a new Remote Monitoring entry in SolMan 7.0 - RZ21
Hi expert,
I am trying to configure Interface Monitoring on Solution Manager system using BPM concept.
For testing purpose i will be monitoring IDocs from Solution Manager CUA system (which is other client in SolMan landscape) to other Satellite system.
As per the configuration part there should be System entry in the Monitoring Technical Topology, that is in RZ21 -->Topology --> System Overview.
For my system its not there, when i press create a new entry in above menu, it gives me new screen where i enter all the details.
Such as System ID, message server, client, CSMREG user details etc.
After saving the details it gives message as "Inserted successfully in secure storage" with no error message on error screen area.
However when i go back in the RZ21 -->Topology --> System Overview my system does not reflect there, even after refresh.
I am not sure if i am missing anything. please help.
Thanks.Hi Gagan deep,
Thanks a lot for your inputs.
I have some confusion here, where can i check whether latest CCMS agent is installed or not?
Also if its not installed what steps i need to follow to acive the same?
Thanks again! -
Metadate entry problem Bridge CS4
I trying to enter metadata to our pictures in Bridge CS4, but I am getting an error messagge instead... does anyone know why?
Best to check that. I have seen too many posts where user finds out network administrator changed permission levels with no notifications. May not be the issue, but one that makes the most sense.
Another option for "it worked yesterday but not now and I have changed nothing" is to reset preferences. Hold down the Ctrl key (win) or option key (mac) and start Bridge. You will get a reset window with 3 options. -
Metadata entry for frame sequences.
Hi There,
I'm running the trial of Prelude ahead of getting the full CC to test a pipeline. A couple of issues have come up dealing with Cinema DNG (I'm using some samples from the Digital Bolex, the Ikonoskop and the BMCC). Firstly, it seems I have to trancode these to view them Prelude - Is this correct? I am getting Premiere down too to see if this has other options.
Prelude will transcode of course, but there's no SDK options and it would be useful to be able to look at the source within the transcode application.
Secondly, I'd like to create a rule to rename the clips according to the directory they are contained within (a workaround borrowed from dealing with these files in Resolve). Is this possible in the 'File Rename' tab? Looking to create clip and/or tape names that will pass through editorial on Premiere, FCP or Avid.
Lastly, is there any option to specifically work with/edit file header tape/reel names in Prelude?Hi -
Thanks for your post.
The current version of Prelude does not yet support CDNG. This is something we have in our backlog for a future version. So for the moment you would indeed need to transcode to another format for using in Prelude. Premiere Pro does support CDNG so if you wish to go directly into Premiere Pro that could also be an option for you.
Prelude does have an SDK and provides API's to perform transcoding operations via Adobe Media Encoder (just as Premiere Pro does). I'm not clear on what your request is related to wanting to look at the source within the transcode app. You can launch Adobe Media Encoder separately (it is also a stand alone application in addition to being leveraged by Prelude and Premiere Pro). You can then see the source and all of the available preset options to generate output. Adobe Media Encoder is installed when you install Prelude or Premiere Pro.
Renaming based on the name of the folder the clips are stored in is a nice feature idea. Currently Prelude does not have an automatic way to do this, however you can do this semi-manually in Prelude. In the Ingest Dialog you would create a new Rename Preset. Within that preset you would use the "Custom Text" field and simply add in the name of the folder your clips currently reside in. When you then run the Ingest operation your clips will be renamed with the folder name you entered. The next time you ingest you would then replace the folder name in the Custom Text field in the Ingest Dialog to match your new set of clips to be ingested.
When it comes to working with/editing the file header tape/reel names, you can open the "Metadata Panel" in Prelude by going to the main Window menu. This will bring up the Metadata Panel that show all of the schemas currently installed (you can also create your own if you wish). Within the "Dynamic Media" metadata schema you will find "Tape Name". You can select one or multiple clips in the Project Panel and then when you enter the Tape Name text all of the selected items will be updated with this metadata. That metadata is available to Premiere Pro as well as any other application that reads the XMP open standard metadata format.
Hope this information is useful. Please post any additional questions or features requests you have.
Regards,
Michael
Maybe you are looking for
-
Windows 7, file properties - Is "date accessed" ALWAYS 100% accurate?
Hello, Here's the situation: I went on vacation for a couple of weeks, but before I left, I took the harddrive out of my computer and hid it in a different location. Upon coming back on Monday (January 10, 2011) and putting the harddrive back in my c
-
PDF form auto-notification/pop-up on 3rd Party PDF readers
My livecycle generated PDF form wants to work only on Acrobat reader for user input and most importantly when summing numbers in the table field. I currently enable usage rights under Acrobat 9. The problem is that when people attempt to open the fo
-
Restore DVD-RW's RW capability after a burn with iDVD
I recently burned a very simple video from an iMovie project onto a DVD-RW with iDVD for a class project. The DVD-RW had a few files on it that I transferred to my hard drive so that I could temporarily use the DVD for the video. iDVD deleted all of
-
I have bought a full TV series, but says error when i try and continue download?
I bought a whole television series but the last 7 episodes wont download, help?
-
My iphone showed to the settings that there is an update available, so there was a software update and i did it , but i don;t like this version ,and I want to go back .How can i do it