Remote Move Request

My question is - Can we migrate a mailbox from Exchange Server 2010 to Exchange 2013 with remote move request. If yes then please share a related document.
Thanks a Lot

Hi Pareek,
Thank you for your question.
If we want to create a mailbox migration cross and target forest is Exchange 2013, we suggest you upgrade source forest Exchange 2010 to Exchange 2013,
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
Then, we could refer to the following link to migrate cross domain:
https://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

No "New Remote Move Request" option anymore

We have been migrating mailboxes from Ex2010SP1 to Office365 using the EMC, and it's generally been going well. However, several of the migration mailboxes failed, and I could remove the move request from the O365 forest without issues and the mailbox
would become available for migrating again, but several of them do not. They have stayed with the green icon as though they should still be migrating, yet they have no move request left as I deleted the failed move requests. (I confirmed via
Powershell). It has been several days for most of these ones, yet they still are not available to migrate again. Other mailboxes that have not yet migrated are still available and have the option to do a "New Remote Move Request" as normal.
Has anyone else encountered this or have any suggestions for a solution to make them available to migrate again?
Ex2010SP1 on WinServer2008

Hi SeanW74,
Per your description, you migrate the exchange email system to Office 365, and have some issue with the mailboxmoverequest.
Could you please check the moverequest using get-moverequest and post the information here.
How about to reboot the exchange server and make a test?
Some information for you:
http://technet.microsoft.com/en-us/library/dd351276.aspx
Regards!
Gavin
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can't connect via outlook after remote move request.

Hi All,
i want to ask something about outlook connectivity,i was do remote move request from different forest. after move request completed, i try login the account
using ms outlook 2010. but got some error like this, "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your
folder with your outlook data file (ost)."
if i try login using OWA, its successful,
i was enable/disable MAPI from this mailbox, but not the solution. finding in google, i found this
link . but not the solution.
anyone have some experience with my trouble?.
thanks in advance.

Hi Rambosality,
According to your description, I understand that outlook cannot connect to Exchange server with error “Cannot open your default e-mail folders. You must connect to Microsoft Exchange with….” When move mailbox.
I want to double confirm some points, please help to collect answers for following question:
1. All account or some special account experience this issue?
2. How about re-create Outlook profile for test?
Please try to use Test-OutlookConnectivity and Test-OutlookWebServices test end-to-end Microsoft Outlook client connectivity, availability service and etc. More details for this command, please refer to:
http://technet.microsoft.com/en-us/library/dd638082(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/bb124509(v=exchg.141).aspx
Additional, I find an article about RPC Client Access Cross-Site Connectivity Changes. It discuss about RPCClientAccessServer setting after move mailbox cross-site, for your reference:
http://blogs.technet.com/b/exchange/archive/2012/05/30/rpc-client-access-cross-site-connectivity-changes.aspx
Best Regards,
Allen Wang

Exchange 2010 move request failed with MapiExceptionCallFailed

hi
Attempting a local move request of Mailbox but it fails.
plz help
Request 'xxxxxxx' (c307df02-04f8-4428-855e-40cfd89fa67f) failed.error code: -2147467259
MapiExceptionCallFailed: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80004005, ec=1162)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=2082]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=689][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropFXDstCopyConfig [83]
    Lid: 27962   ROP: ropTellVersion [134]
    Lid: 27962   ROP: ropFXDstPutBufferEx [157]
    Lid: 17082   ROP Error: 0x48A
    Lid: 31329
    Lid: 21921   StoreEc: 0x48A
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 1238    Remote Context Overflow
    Lid: 1947    StoreEc: 0x48A
    Lid: 1435    StoreEc: 0x48A
    Lid: 1947    StoreEc: 0x48A
    Lid: 1435    StoreEc: 0x48A
    Lid: 1947    StoreEc: 0x48A
    Lid: 4559    StoreEc: 0x48A
    Lid: 21802
    Lid: 19994   StoreEc: 0x48A
    Lid: 20202
    Lid: 3305    StoreEc: 0x48A
    Lid: 32762   dwParam: 0x3FE70003
    Lid: 32762   dwParam: 0x361384B0
    Lid: 32762   dwParam: 0x36170003
    Lid: 32762   dwParam: 0x36DA0102
    Lid: 32762   dwParam: 0x36E00102
    Lid: 32762   dwParam: 0x3FD60040
    Lid: 32762   dwParam: 0x3FE4000B
    Lid: 32762   dwParam: 0x67590102
    Lid: 32762   dwParam: 0x675A0102
    Lid: 32762   dwParam: 0x30080040
    Lid: 32762   dwParam: 0x675C0102
    Lid: 32762   dwParam: 0x65E30102
    Lid: 32762   dwParam: 0x67510003
    Lid: 32762   dwParam: 0x672D0003
    Lid: 32762   dwParam: 0x673384B0
    Lid: 32762   dwParam: 0x673284B0
    Lid: 26346
    Lid: 4073    StoreEc: 0x48A
    Lid: 28570   StoreEc: 0x48A
    Lid: 29738
    Lid: 3401    StoreEc: 0x48A
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x48A
    Lid: 22630
Context:
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2362
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary(c307df02-04f8-4428-855e-40cfd89fa67f)
OpCode: TransferBuffer
DataLength: 2362
Any ideas? any help much appreciated

What version of Exchange 2010? SP2, RU #?   I saw this support article form MS for 2003 --> 2010
http://support.microsoft.com/kb/2579051. Not sure if it is applicable. It could be you need to go to RU4 for SP2 Exchange 2010. Do not install RU5 as there were issues.
I've also run into several support articles about ACLs on the mailbox or fiolders:
http://runebelune.blogspot.com/2010/11/mapiexceptionnosupport.html [remember that Exchange 2010 you need to use ExFolders and not PFDAVAdmin]
http://social.technet.microsoft.com/Forums/hi-IN/exchangesvrdeploylegacy/thread/73a385d5-ea2f-47b9-87f0-c481b1f29b35
Let me know if I can provide any additional help.
JAUCG

Exchange 2013 shell mailbox move requests showing up on 2010 hub server

We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?

Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Problem clearing a move request

Hi,
I've got a simple Exchange 2010 setup running along a 2007 insallations.
I have 2 DC's both running 2008 but not R2.
My issue is, I have moved a couple of users using the local move request. One of them I delete the move request as soon as it had been completed (the icon changed back to the one without the little green arrow), but the other gives me an error message of
Microsoft Exchange Error
Action 'Clear Move Request' could not be performed on object 'Enid Dalton'.
A User
Failed
Error:
Couldn't find a move request that corresponds to the specified identity 'home.local/Top Level/2nd Level A/A User.
The user exists and has not been moved within the OU structure.
In a real world situation, this would then stop me from moving the user again. Obviously this doesn't happen every day, but a user could move offices for a short period of time and wish to move the mailbox to a local server.
Any idea's ?
Thanks in advance
Phil
Remember : Experience is something you don't get until just after you need it.

When migrating from 2007 or 2010 to 2013 Exchange, if the account was deleted before the move request was cleared, or it was put into a different OU, you can force clear the move request as follows:
Get-MailboxDatabase|%{Get-MoveRequestStatistics-MoveRequestQueue
$_.Name}
|SortPercentComplete|MailboxIdentity,ExchangeGuid,RequestQueue,StatusDetail
Remove-MoveRequest-MailboxGuid
$MbxGuid-MoveRequestQueue
$MoveReQ-Verbose

Retrieve objects list of a remote change request

Hi guys,
someone know how can I retrieve the objects list contained in a remote change request (using rfc destination)?
any suggests,examples or solutions?
Many rgs

I answer myself...this fm sounds good "TR_OBJECTS_OF_REQ_AN_TASKS_RFC"
bye

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

Mailbox move requests remain in Queued status

My server is part of a two member DAG. DAG shows to be healthy. I have turned logging up to Expert level but no useful data is generated (only shows that the move request was created; no problems are indicated)
Server is Exchange 2010 SP 3

Hi,
Please check the database copy status under management tab on source database and target database. This can be that one or more of those databases you are moving mailboxes to has a failed or suspended copy and its failing the DataMoveReplicationConstraint
check.
Refer to this blog about Exchange 2010 Mailbox Moves and Mailbox Resiliency
http://blogs.technet.com/b/exchange/archive/2011/05/06/exchange-2010-mailbox-moves-and-mailbox-resiliency.aspx
In addition, please check the event log on the Client Access server running the instance of the Microsoft Exchange Mailbox Replication service that's processing the failed move request.
Best Regards.

Move request stuck

Hi
I have a user where I removed the failed moverequest. If I take a look at the user at the on-premise EMC he still has the little Move Request ICON. I can not move him again now.
I tried to create a migration batch from Office 365, but that was "stalledduetomailboxlock"
Then I stopped the batch, but now that is in "Stopping"
How can it go this bad - and what can I do to clear everything?
BR
Steen

Run Get-MoveRequest in Online PowerShell. Run the same cmdlet in the Exchange Management Shell. Make sure that there is no move request for the user in either side. If there is, delete it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How to remove failed mailbox move request

Hi all,
Exchange 2010 SP1
i canceled or move failed on several mailboxes. How can I move these mailboxes again since
they still have move request checked?
Thank you.

Hi JaneHHH,
Here are some examples:
To just remove the failed moverequests in EMS, RUN Get-Moverequest -MoveStatus Failed | remove-moverequest
Move all moverequests in EMS, RUN get-moverequest | remove-moverequest
You can of course also remove them in EMC, but a simple right-click the once you want to move in EMC|Recipient Configuration|Move Requests and choose "Clear Move Requests"
:Martina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

New mailbox move request Exchange 2010 : queued

I have deployed new Exchange 2010 server in Exchange 2003 Organization. It is simple setup one Exchange 2003 and New Exchange 2010.
I was trying to move mailbox from Exchange 2003 to 2010 and it has status of QUEUE “indefinetly”.. I have tried several mailboxes and result is the same.
Then I decided to create new database on Exchange 2010 sever. I have crate new mailbox on Exchange 2010 sever, send and receive some emails. And then try to move mailbox to new database. Same results.
I run test MSR replication and is ok.
I have increase msr LOGGING TO Maximum, no errors. I have rebooted server several times, no differences…

Hi,
Based on the description, status of mailbox move request from Exchange 2003 to Exchange 2010 is "indefinitely".
Please make sure mailbox databases in Exchange 2010 and Exchange 2003 are mounted.
Have you moved mailbox using the New-MoveRequest with the BadItemLimit and the AcceptLargeDataLoss parameters? If not, it's worth to do it again. Before you create a new move request, please check if there is any previous move request. If there is, please
clear the previous move request and then move the mailbox.
If the issue persists, please try to move mailbox to another database in Exchange 2003 and then move to Exchange 2010 to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010 Local Move Request with Error (hr=0x80004005, ec=1292)

Trying to migrate from exchange 2003 to 2010.
Ran a Local move request and received the following error.
What can I do?
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
Aman Amiri
Failed
Error:
MapiExceptionMailboxInTransit: Unable to open message store. (hr=0x80004005, ec=1292)
Diagnostic context:
    Lid: 45095   EMSMDB.EcDoRpcExt2 called [length=121]
    Lid: 61479   EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=18]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropLogon [254]
    Lid: 17082   ROP Error: 0x50C
    Lid: 26937
    Lid: 21921   StoreEc: 0x50C
    Lid: 31418   --- ROP Parse Done ---
    Lid: 22753
    Lid: 21817   ROP Failure: 0x50C
    Lid: 26297
    Lid: 16585   StoreEc: 0x50C
    Lid: 32441
    Lid: 1706    StoreEc: 0x50C
    Lid: 24761
    Lid: 20665   StoreEc: 0x50C
    Lid: 25785
    Lid: 29881   StoreEc: 0x50C
Exchange Management Shell command attempted:
'RWR.local/MyBusiness/Users/SBSUsers/Aman Amiri' | New-MoveRequest -TargetDatabase 'Mailbox Database 1110868248' -BadItemLimit '0'
Elapsed Time: 00:00:01

Hi
Is the database on Exchange 2010/2003 mounted and all services started?
Is your account part of Organization Management and able to perform the move requests?

How do I CANCEL a Remote Lock request made on iCloud?

How do I Cancel a Remote Lock Request I made on iCloud?

It's not possible to cancel a remote lock made using iCloud.

New Local Move Request Script for Exchange 2010 mailboxes

Hi I would like to have a script that can enable me automatically move mailboxes of certain domains to a new mailbox database. E.g. new local move request to move only 20 mailboxes in mailboxdatabase01 with the domain name: mymove.com, moving
it to mailboxdatabase05. Also, I want to be able to adjust the number of mailboxes to move. Thanks in advance.

Wrap this, or something similar, into a script that filters out the users with that domain in a particular DB.
http://technet.microsoft.com/en-us/library/dd876878(v=exchg.141).aspx
And some filtering examples are in here:
http://blogs.technet.com/b/rmilne/archive/2014/03/24/powershell-filtering-examples.aspx
I doubt there is a sample script out there that does exactly what you want, so you'll have to do some coding.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Remote Move Request

Similar Messages

Maybe you are looking for