Remote no go in hifi mode?

Anyone got any tips on how to get the remote to work on hifi mode?

Have you tried to approach the remote to the IR sensor? Maybe something is interfering the IR signal.
To test if it works on PC mode, install MSI radio, MC3 or the Girder Plugin.
Just kidding but... are the batteries inserted on the right polatity?
Good luck and happy new year!!!!

Similar Messages

Mega PC 180 Remote (HiFi Mode) and Eject problem SOLVED

Hi everyone,
I just bought the MSI DR8-A DVD Writer......... and Gues what..??!!??
- Now i don`t have any problems anymore with the Remote in HIFI mode (strange)
- Also the new drive will eject as it supose to ........
I am a very happy man now.
I am all set up, and my Home Media Center is complete Now.
Don`t understand some of you guys still having problems....
Remember: the Mega PC is not for NOOBS
Greetings from the Netherlands,
Defaulty
MSI Mega PC 180
AMD XP2400
2x 256 mb (No label) PC3200
80 Gig Maxtor
MSI DR8-A DVD Writer
MSI TV@nywhere Master
MS Windows XP (SP1)

Quote
Originally posted by sav_
nopz.
I even wiped the entire copper layer of the cooler with polish, added Artic Silver Ceramic and yet, 40° idle, 59° stressed...
Note that the intake of the cpucooler gets blocked by the Radeon, so the reason is obvious
A pretty common trick used on Biostar SFFs (which are even smaller than the 180) is to add two Zalman 80 x 15 OP1 fans to the side panels. Left panel toward the front and right panel toward the rear. This gives a good cross ventilation flow and when you run the fans on the low voltage setting-----it is totally silent---so you haven't added any noise to the overall setup.
Drops CPU temps 4-5 C. Might work on the 180. You can see an example of the side panel fans----as well as another possible solution, watercooling, here:----just scroll through all the pics to find the fan solution...SFF Fans and Watercooling
Good Luck-----John

MEGA 865 CD playback problem (in HiFi mode)

Hi, fellow MEGA PC owners
I have a problem with playing my CDs on MEGA 865 in HiFi mode. It recognizes the CD, plays the first track or two, then stops playing, displays SEARCHING message for a ten seconds or so and then switches to NODISC. When I press Eject button on the box or remote, it switches back to SEARCHING and shows the number of tracks on CD.
The same problem is with the MP3 playback. It plays several MP3s ok and then switches to SEARCHING and NODISC.
Does anyone else has this problem? Any idea on what could be wrong? I checked all Slave/Master jumpers, all are ok, the cd drive is recognized by the BIOS.
My configuration is:
MSI MEGA 865, P4 3.0 GHz Northwood, 1 Gb PC3200 RAM, NEC 2500A DVD burner.

Hey JavaDuke!
I've got the exact same problem with my Mega180, also running a NEC 2500A! And it is starting to get very annoying...
I can play cd's for hours without any problems, when suddenly it stops in the middle of a track, displaying the NODISC message. Doesn't matter whether I use original cd's or copied ones, and the same disc can play through perfectly one day and halt several times the next. I've been thinking about replacing the NEC 2500 with something else but haven't got round to it as yet, however the post in the thread mentioned above states that different drives still produced the same error, so it's probably the bluebird chip that is faulty.
The mentioned thread doesn't really focus on our problem though as it mostly evolves around boot problems, so I don't see any problem with starting a new thread dedicated to this problem.
I might try the newer firmware, although there is no official word from MSI that this problem even exists, and I therefore doubt that it is solved. Not many people seem to have this particular problem either, or it appears so seldom that they choose to ignore it (as I have done for some time now).
Please report back if you solve this one!
-M

Problems while playing CD's in the HiFi mode Mega PC 865

Do anyone has the solution!
I'll tried the Nec ND3500A, Pioneer DVR-105, MSI DR8-A2, MSI MS-8216S and 4 different BenQ DVD writers bud none of them works correct.
The player stops after 2-3 minutes or skip 1-2 seconds while playing CD's in the HiFi mode.
Mega PC 865.
Can someone help me!!!!

Quote from: djdennis on 12-July-05, 05:31:25
Do anyone has the solution!
I'll tried the Nec ND3500A, Pioneer DVR-105, MSI DR8-A2, MSI MS-8216S and 4 different BenQ DVD writers bud none of them works correct.
The player stops after 2-3 minutes or skip 1-2 seconds while playing CD's in the HiFi mode.
Mega PC 865.
Can someone help me!!!!
I had the same hassle but with 865 pro. I jsut link my Plextor Multirecorder with Motherboard via simple audio cable. This cable 4 pin socket with only 3 cords connected. Take a look on the back of your drive - there should be proper socket.
But in Instant-on mode cd-player has very slow navigation - i have to wait up to 7-10 seconds when switching tracks!

Pioneer 110D In HiFi Mode

Just got a Pioneer 110D for my Mega 651. It is working perfectly in PC Mode, but CDs that play fine in PC mode are jumping in HiFi mode. Has anyone else got this problem? Has anyone got any suggestions on how to resolve it?
Thanks

I have the same problem with my Mega 180.
Any solution would be worthwhile for me as well.
Thx!

Hifi mode doesnt work after xp reboot

To get the hifi mode to work, i have to remove the power plug at the back and put it in again, after restarting windows xp. Then it works. I hate doing this
ps even the hifi button doesnt work!
any fixes for this would be appreciated!
thanks
latest updates etc installed using msi update thingy
mega 865
tdk 4x dvdrw
512 ram
ati 9800 se 128

The Hi-Fi mode switch can not be used when the computer is turned on BUT if using the MMC III you will notice that the HI-FI will light up. Can you give us some more information on this ie does it happen if you start up XP and do not use the MMCIII, what happens if you shut your computer down by holding in the PC button? Have you tried this with your CD and AGP cards installed, has this always happened, Have you tried a boot disk to see if the operating system is upseting the LCD. If it works fine off a boot up disk then I would do a fresh install of your XP.

HIFI mode and Display just died? (865)

I think it was when I installed new Intel INF drivers by the MSI Live update function
anyway later I see my display is dead and - also HIFI mode is goone
What do I do know??

Quote
Originally posted by 540is
I think it was when I installed new Intel INF drivers by the MSI Live update function
anyway later I see my display is dead and - also HIFI mode is goone
What do I do know??
Try removing the powercord for a minute or two
if that does not help disconnect the connector to the front display for a minute or two.
Good luck ...
Ray

MEGA 180: Media Center deletes radio stations of HiFi Mode

Hello
We have the following problem: Media Center III deletes the radio stations programmed in HiFi Mode!
- I programmed the 6 stations in the HiFi Mode as described in the MSI manual
- Switched to the PC mode and started Media Center III and entered the radio section
- After shouting down the PC and switching to the HiFi mode, the 6 programmed stations are gone away.
The problem only appears when using Media Center. It seems that Media Center deletes the stations when communication with the radio tuner.
Thanks for your help!
Best regards
Patrik

the problem is the fact that the radio tuner isn't a "physical" device that Windows recognises
damn MSI and their proprietory hardware!! surely some sort of USB tuner "hardwired" to the USB controller would have been a better solution? grr, but then how would that have worked in Hi-Fi mode...

Mega 180 - Hifi mode and MP3 from DVD

Is it possible to play MP3's in Hifi mode from a DVD? - I know you can from a CD-R but what about a DVD?
Thanks..
Neurobrain

will check that one for you asap .. got dvds loaded with mp3s ... how do you want to hook up your speakers ? Analogue or Digital?

How to put a remote portlets server in maintenance mode

Hi,
We are running Plumtree Portal 5.0.4 on Windows 2000 Server SP4. We have a remote portlets server which hosts a lot of portlets' webservices.
We need to put the remote server in maintenance mode.
How can we disable all webservices hosted by this remote server without disabling each webservices manually (which will be painful) ?
Regards,
QuÃ© Son PHAM VAN

I don't want to encourage you to modify your database directly, but it seems to be the only way to do this easily. Try:
update ptwebservices
set enabled = 0, disabledmsg = 'This portlet has been disabled. Blah blah blah.'
where gadgetserverid = 200;
Replace 200 with the ID of your remote server.
HTH,
Chris Bucchere | bdg | [email protected] | http://www.bdg-online.com

Error in Remote Connect Oracle with MTS Mode

I've configed my database to run MTS.
My db is 8.1.5 with x86 Unix SunOS 5.7
If I connect db through local area network, I can connect it with MTS mode.
But if I try to connect db from a remote site, I can't connect and the following error shown :
ERROR:
ORA-12545: Connect failed because target host or object does not exist
By adding a clause (SERVER = DEDICATED) in my remote client's tnsnames.ora
I can connect it.
Rgds,
Edward
The following is my configuration.
init.ora :
mts_dispatchers = "(PROTOCOL=TCP)(DISP=3)"
mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
mts_servers = 1
mts_max_servers = 40
mts_max_dispatchers = 4
listener.ora :
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = QQQQdb)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = QQQQdb)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/8.1.5)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = QQQQdb.net)
(ORACLE_HOME = /u01/app/oracle/product/8.1.5)
(SID_NAME = QQQQdb)
tnsnames.ora :
QQQQDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = QQQQdb)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = QQQQdb.net)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
null

I have run into the same problem using oracle 8.1.6.1 with redhat 6.2..
I have found out that only when I specify host ip in the mts_dispatchers the mts will work correctly..(specifying host domain name is no use)
Here is a sample of the configuration, hope that helps..
mts_dispatchers = "(address=(protocol=tcp)(host=192.168.0.1))(dispatchers=4)"

Enable Remote Management in Single-User Mode

Hi,
I would like to know how to enable Remote Management option (System Preferences > Sharing) in single-user mode.
Thanks in advance
Regards

If ssh won't get you where you want and brute-force loading the various plists isn't working for your case (as mentioned, error messages and details might help), then AFAIK, fully remote-managing a Mac usually involves adding a network-capable power switch and an outboard network-capable KVM adapter. (The Xserve was the last box with (limited) remote-management capabilities, and there's not been any indication that Apple might be releasing systems with Intel AMT (iAMT, vPro) support available and enabled.)

Remote front panel with viewing mode in monitor jams if two browser connects

I made a exe with the vi attached, with the web publishing viewing mode set to monitor every 1s.
I copy all the executables and generated files to a target computer. The target computer is 4 CPU 2Ghz, 1Gb RAM, Windows 2000.
If I open a client web browser connection to the remote panel, everything is fine, I can see updates every 1s or so.
But if I open two client web browser connections, the display in the two web browser grinds to a halt, and the exe in the server computer slows down from 1s update to 6s update.
If shut off one client web browser, the other client browser and the exe in server go back to normal speed.
So what is the problem? How do I solve this problem? Is this problem solvable?
Attachments:
monitor4.vi ‏85 KB

Bump.

Remote ipod shutoff and sleep modes?

Hello all,
I have a kenwood DNX9980HD car stereo.
When I plug my ipod into the connector for it, the Kenwood takes control and works flawlessly.
I want to leave the ipod in the car all the time plugged into the Kenwood.
The problem is when I shut off the car.
The Kenwood control disconnects as expected, controls go back to the ipod but the ipod doesn't shut off.
It thinks its still supposed to continue playing and will do so until the battery drains.
Then the next time I start the car, I have to wait for the ipod battery to charge before the ipod is available.
I think this is a great way to kill the battery quickly.
I can make a point of pressing pause before I shut off the car, but I'd like to make it automatic.
Is there some setting that I can activate that if its not remote controlled it turns off?
I did see this link in another topic on a similar subject, but it doesn't go to an article:
http://docs.info.apple.com/article.html?artnum=60945
Dan

Okay so I finally figured this out and want to share it with you all.
When you have your ipod unhooked from your Kenwood, put it on pause.
Press and hold the play/pause button until your screen goes blank.
Then flip the switch on the top to lock the buttons.
Now attach the ipod to your Kenwood.
Whenever you start the car, the ipod wakes up because the Kenwood takes control.
Use the Kenwood ipod interface as normal.
When you shut down the engine, and thus the control interface to the ipod, the ipod reverts to the last control on its face, which was paused.
When no activity is detected for a short time (I believe 30 min) the ipod goes into the deeper sleep and no battery is used.
If you left the ipod in the play mode before you hooked it up, it will return to play mode when you turn off the car, and thus run until the ipod battery is dead.

ITunes Remote - Album Artwork in Playlist Mode

Hello,
It is extremely frustrating, lunacy really, that we can't see album artwork when in playlist view within Remote for iPad. Does anyone know of a workaround or different software?

The only way I was able to solve this problem was to set up a brand new Itunes library. It is a fairly quick and easy process but you will need to recreate all of your playlists. Certain information from your songs will also not carry over such as rating and play count. I don't remember how I brought over the apps, but there was an easy way to do this once the new library is set up.
To create a new library, first make sure that all of your music is backed up to your computer.
Exit out of Itunes and double click the Itunes icon while holding Shift.
Save the new library as whatever you like.
Drag and drop the music folder from the old library into the new one.
When you sync your Ipod with this new library the artwork will be fixed.

Remote no go in hifi mode?

Similar Messages

Maybe you are looking for