Remote not working with WinXP 64

I have a X-FI Platinum card with the front module and remote. Under WinXP Pro everything worked fine. I have since upgraded to WinXP 64 bit Pro and the remote does not work.
I have installed the latest driver for WinXP 64 (At least last weeks driver) which went OK. Soundcard seems to work OK. I have a 5. speaker setup and I get sound from all speakers. Before there was the createi've audio console that was in the system tray, but that doesn't seem to be there with WinXP 64.
Is there another download that I need to do for the Remote to function ? Also I no longer have any sound test options in the audio console is there another download for that as well ??System Specs:ASUS P5N32 SLI Deluxe MOBOIntel P4 660 processor2 GB RAMBFG 7800 GT video cardX-FI Platinum sound cardWinXP Pro 64 bit?Thanks,?wstreaker

I am not sure whether the remote software gets installed with the 64 bit drivers or not. I know some people have turned to alternate software to control the remote on WinXP 64 bit edition successfully. I am sure you can find out what I mean by searching these forums, I am not allowed to say any more than that. Hope that helps?

Similar Messages

  • Remote not working with Apple TV

    My Apple remote stopped working with my Apple TV the other day. The light on the Apple TV does flash as buttons are pressed, but nothing happens. I tried to pair the Apple remote, nothing. I tried to pair my Macbook remote, nothing. I have even pulled the plug a let it sit for a day before plugging it back in. I have recently upgraded to iTunes 7.3.
    Thanks

    What does it do when you connect it back up and turn it on, what screen do you get etc.

  • Remote not working with new Mac Book Pro

    Had my 2.16 MBP for 2 days and cannot get the remote to work. The IR is not disabled, but I cannot select the UNPAIR option so I am guessing the remote is not paired with the MBP.
    I am pressing the Menu and FFD button, but nothing appears to happen.
    Has anyone got any suggestions as to what to try next ?
    Thanks
    Mark

    Hi Mate,
    I read this once somewhere hope it helps..
    A great way to tell whether your remote control is working or not is to point it at the camera while you have Photo Booth running. The camera somehow picks up the IR signal and translates it into the visible, which I think is hilarious. It works with any IR remote control.
    If your remote is eating up batteries that fast, it might have some kind of short circuit. I'd get it replaced.

  • Remote Not Working With QuickTime 7.3.0

    Hi I just upgraded and realized my frontrow remote has stopped working with Quicktime. The remote works with VLC, iTunes etc but not QT. Forget about scanning forward or backward it cant even adjust the volume. I never had the problem before. I have tried playing both avi and mp4 files.
    I run Tiger and have a macbook

    As a follow up -
    I spoke with Apple Support about this and was routed to a few people who were helpful, and moved it up to the engineers of Keynote (and the white remote?) for a solution.
    A few days later I received this reply:
    Hello Eric, I have heard back from the engineers about this. It looks like as long as Keynote 6.0 is present on the system it will default to using the remove in that application. If you remove Keynote 6.0, which we would not recommend, then you can use Keynote 5.3 with the remote. Presently though this is normal and expected behavior.
    I replied by expressing my disappointment that this wasn't functional, since I'm not comfortable using Keynote 6.0 yet.  Short of uninstalling 6.0, the only workaround I have found is to use the iPhone/iTouch Keynote remote app, or make a duplicate copy of your presentation to be opened in 6.0 (and using the remote there).

  • Remote not working with MBP lid closed

    My MBP OSX 10.8.2 is plugged in using the charger and connected via an HDMI adapter to my TV.  Apparently, the MBP will work in clamshell mode only if connected to a display and connected to a
    The Apple TV remote controller works fine if the lid is open at a distance of 15 feet.  Once the lid is closed, however, the remote controller stops working.  It was working fine previously.  The remote works fine with other appliances and applications, such as Apple TV as well as the MBP when the lid is open, so I believe the batteries are fine.
    Any help would be most appreciated.  Thank you.

    What does it do when you connect it back up and turn it on, what screen do you get etc.

  • Apple Remote not working with Mac Mini

    Hi there,
    I woke up to quite a strange problem today... My Apple Remote is no longer working with my Mac Mini! I tried all the controls, including launching front row, and the volume controls - but no go...
    I even tried it in Windows BootCamp under iTunes, but it still wouldn't work..
    I tried pairing it in System preferences, but again, it wouldn't recognise my apple remote when i held down the Menu+fast forward keys for 5 seconds...
    The weird thing is, it works fine with my iMac on another floor (out of plain sight from my Mini..), and it isn't paired with the iMac or anything...
    Any idea what the problem might be? Thanks in advance!

    So you got a dead remote or a dead battery. Call AppleCare and it will be taken care of. What's the big deal? These things happen from time to time.

  • Flash Remoting not working with CFERROR tags

    I need help and can't find out what's going on. I developed
    an app with CF7 and Flash Remoting and everything works fine, but
    as soon as I add an error-handling<CFERROR> tag to my
    Application.cfc file, Flash Remoting no longer works. It's almost
    like it can't connect to the gateway anymore or something is
    blocking it. When I remove the <CFERROR> tag in the
    Application.cfc file, everything works fine again. I really need to
    find a solution to this, any ideas???
    (CFMX7/SQL Server2000/Window 2003 Server)
    Here's my Application.cfc code:

    I have attached the actionscript for the data connection. The
    odd thing about this issue is some of the data is being displayed
    from the webservice call and then some is not. The drop down list
    is not being populated but I am getting some text in a textarea
    that is on the form. My datasource is a SQL Server database and in
    ColdFusion administrator, I used the actual machine name to point
    to the datasource because it is directly linked to my web server.
    This configuration is the one giving me problems. If I change the
    datasource to my test SQL Server (server.somewhere.com) it works
    fine. Does this help any?

  • Remote not working with keynote 5.3 on mavericks

    Using the apple remote on keynote 5.3. Cannot advance the slides anymore
    Any help would be appreciated. Keynote 6 is not what I expected

    As a follow up -
    I spoke with Apple Support about this and was routed to a few people who were helpful, and moved it up to the engineers of Keynote (and the white remote?) for a solution.
    A few days later I received this reply:
    Hello Eric, I have heard back from the engineers about this. It looks like as long as Keynote 6.0 is present on the system it will default to using the remove in that application. If you remove Keynote 6.0, which we would not recommend, then you can use Keynote 5.3 with the remote. Presently though this is normal and expected behavior.
    I replied by expressing my disappointment that this wasn't functional, since I'm not comfortable using Keynote 6.0 yet.  Short of uninstalling 6.0, the only workaround I have found is to use the iPhone/iTouch Keynote remote app, or make a duplicate copy of your presentation to be opened in 6.0 (and using the remote there).

  • Java Plug-in not working with WinXP SP2 Registry Key Missing Error Pop-Up

    I have WinXp PRO with SP2 and the Oct 12 Security Update Patch for SP2 loaded and I went to my Control Panel and saw that the JavaRuntime Environment 1.4.2_04 icon was missing and when I went to click the Java Plugin icon to Open it, I got the following message in a Error Pop-Up window:
    The system cannot find the registry key specified:
    HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java pPlug-in\1.4.2_04\JavaHome
    I then went to Chage Access Program Controls and when I clicked on the Change box for the program, it wanted me to re-install the whole environment.
    Prior to doing this, and potentially screwing up my MS winXp environment, I went to the Sun support page for Java Plug-in and I did get the dancing elmo appear as they said I would but I noticed that my environment was MS VM, not Java and that I was out of date and a newer update was avaliable.
    The downloads page for the plug-in states clearly that it supports WinXp SP1 and NOT SP2.
    SO, my question is, do I need to re-install anything or wait till the whole SP2 issue and java with (BITS) issue gets resolved and just use the MS VM engine during my browsing time? Is there a workaround and what impact will this have on my system? I am not developing Java Apps but am a Power user in Windows who is wondering if applets and general browsing might be easier, faster and more fluid if the Java Runtime was enabled as opposed to the MS VM solution?
    Any ideas or thoughts on this very timely issue would be greatly appreciated as I see others have tried to post related issues but none that succinctly combines what I have asked for here in this post.
    Thanks from NYC -Phil

    did you know that XP SP2 has so many technical problems? try SP1 or contact the WindowsXP Vendor

  • Remote not working with STB

    Another remote from another box works fine. using the "broken" remote it blinks, just doesnt control the box. seems to have happened after power outage. unplugging box and replugging doesnt work. seems to be a programming issue and I cant seem to find any information about it elsewhere.

    If you log into In-Home Agent then click the remote control picture you can order a FREE replacement.

  • Apple infrared remote not working

    Just a few days ago I updated Keynote, my time scale is a little hazy but I know recently, like last week, I used my appl infrared remote to control Keynote. I was able to press play and advance slides. This was a great thing, I remember doing and thinking wow apple is great. Now it doesn't work. I can turn the volume up but playing or advancing the slides does nothing. It sure seems like the last update removed this feature.
    Anyone know whats going on?
    Thanks,
    Kris

    Hi Kris,
    If you are having an issue with your Apple Remote not working with your Keynote presentations, I would suggest that you troubleshoot using the steps in this article - 
    Troubleshooting the Apple Remote - Apple Support
    Start with the section titled If you're using the remote with a computer.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • Sharepoint 2013 list view quick edit does not work with out remote API permissions

    sharepoint 2013 list view quick edit does not work with out remote API permissions.
    When I give Use Remote Interfaces  -  Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • SQLDEVELOPER 2.5 and above on WinXP/Win7 does not work with OID auth ?

    Hi,
    I have SQLDEVELOPER 1.5 on my WinXP which works fine with database local users as well as global users(OID) authentication. But with SQLDEVELOPER 2.5 and above it throws below error with OID authentication.. local user authentication is however fine.
    Status:Failure-test failed:unsupported verified type
    Any idea why Sqldeveloer 2.5 and above does not work with OID auth?
    Thanks for help
    Sivaji

    It might be to do with the oracle client version or the JDBC version. (for example v3 needs the 11i jdbc drivers and associated dlls for oci connections.

Maybe you are looking for