Remote object taking more time to respond
I am using live cycle data services to access my remote java object. Sometimes remote object is taking a lot of time to respond (even 15 minutes). Please give
me some solution.
Can you enable LCDS logging and see if you are seeing any errors? What client (Flex, JS, iOS, Java) are you using? In general, you can bound the timeout on request. Look at the documentation for client (Flex, JS, iOS, Java) are you using, for how to do it.
Rohit
Similar Messages
-
Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
We have verified all the Assignment Rules, Views.
We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
Version Siebel 7.7.2.12,
OS Solaris.let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
3. Make a snapshot of v$system_event:
create table begin as select * from v$system_event;After the import run
create table end as select * from v$system_event;Now compare the values:
select * from begin order by TIME_WAITED_MICRO descwith the values given you by
select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
Alternativly, you could start a 10046 trace on the loading session and use tkprof.
Dim -
Custom Report taking more time to complete Normat
Hi All,
Custom report(Aging Report) in oracle is taking more time to complete Normal.
In one instance, the same report is taking 5 min and the other instance this is taking 40-50 min to complete.
We have enabled the trace and checked the trace file, but all the queries are working fine.
Could you please suggest me regarding this issue.
Thanks in advance!!TKPROF: Release 10.1.0.5.0 - Production on Tue Jun 5 10:49:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Sort options: prsela exeela fchela
count = number of times OCI procedure was executed
cpu = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk = number of physical reads of buffers from disk
query = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows = number of rows processed by the fetch or execute call
Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
ORA-00922: missing or invalid option
parse error offset: 1049
EXPLAIN PLAN option disabled.
SELECT DISTINCT OU.ORGANIZATION_ID , OU.BUSINESS_GROUP_ID
FROM
HR_OPERATING_UNITS OU WHERE OU.SET_OF_BOOKS_ID =:B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.05 11 22 0 3
total 3 0.00 0.05 11 22 0 3
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
3 HASH UNIQUE (cr=22 pr=11 pw=0 time=52023 us cost=10 size=66 card=1)
3 NESTED LOOPS (cr=22 pr=11 pw=0 time=61722 us)
3 NESTED LOOPS (cr=20 pr=11 pw=0 time=61672 us cost=9 size=66 card=1)
3 NESTED LOOPS (cr=18 pr=11 pw=0 time=61591 us cost=7 size=37 card=1)
3 NESTED LOOPS (cr=16 pr=11 pw=0 time=61531 us cost=7 size=30 card=1)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=11 pr=9 pw=0 time=37751 us cost=6 size=22 card=1)
18 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK1 (cr=1 pr=1 pw=0 time=17135 us cost=1 size=0 card=18)(object id 43610)
3 TABLE ACCESS BY INDEX ROWID HR_ALL_ORGANIZATION_UNITS (cr=5 pr=2 pw=0 time=18820 us cost=1 size=8 card=1)
3 INDEX UNIQUE SCAN HR_ORGANIZATION_UNITS_PK (cr=2 pr=0 pw=0 time=26 us cost=0 size=0 card=1)(object id 43657)
3 INDEX UNIQUE SCAN HR_ALL_ORGANIZATION_UNTS_TL_PK (cr=2 pr=0 pw=0 time=32 us cost=0 size=7 card=1)(object id 44020)
3 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=2 pr=0 pw=0 time=52 us cost=1 size=0 card=1)(object id 330960)
3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=2 pr=0 pw=0 time=26 us cost=2 size=29 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 11 0.01 0.05
asynch descriptor resize 2 0.00 0.00
INSERT INTO FND_LOG_MESSAGES ( ECID_ID, ECID_SEQ, CALLSTACK, ERRORSTACK,
MODULE, LOG_LEVEL, MESSAGE_TEXT, SESSION_ID, USER_ID, TIMESTAMP,
LOG_SEQUENCE, ENCODED, NODE, NODE_IP_ADDRESS, PROCESS_ID, JVM_ID, THREAD_ID,
AUDSID, DB_INSTANCE, TRANSACTION_CONTEXT_ID )
VALUES
( SYS_CONTEXT('USERENV', 'ECID_ID'), SYS_CONTEXT('USERENV', 'ECID_SEQ'),
:B16 , :B15 , SUBSTRB(:B14 ,1,255), :B13 , SUBSTRB(:B12 , 1, 4000), :B11 ,
NVL(:B10 , -1), SYSDATE, FND_LOG_MESSAGES_S.NEXTVAL, :B9 , SUBSTRB(:B8 ,1,
60), SUBSTRB(:B7 ,1,30), SUBSTRB(:B6 ,1,120), SUBSTRB(:B5 ,1,120),
SUBSTRB(:B4 ,1,120), :B3 , :B2 , :B1 ) RETURNING LOG_SEQUENCE INTO :O0
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 20 0.00 0.03 4 1 304 20
Fetch 0 0.00 0.00 0 0 0 0
total 21 0.00 0.03 4 1 304 20
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 LOAD TABLE CONVENTIONAL (cr=1 pr=4 pw=0 time=36498 us)
1 SEQUENCE FND_LOG_MESSAGES_S (cr=0 pr=0 pw=0 time=24 us)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.01 0.03
SELECT MESSAGE_TEXT, MESSAGE_NUMBER, TYPE, FND_LOG_SEVERITY, CATEGORY,
SEVERITY
FROM
FND_NEW_MESSAGES M, FND_APPLICATION A WHERE :B3 = M.MESSAGE_NAME AND :B2 =
M.LANGUAGE_CODE AND :B1 = A.APPLICATION_SHORT_NAME AND M.APPLICATION_ID =
A.APPLICATION_ID
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.03 4 12 0 2
total 5 0.00 0.03 4 12 0 2
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=6 pr=2 pw=0 time=15724 us cost=3 size=134 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=20 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_NEW_MESSAGES (cr=4 pr=2 pw=0 time=15693 us cost=2 size=125 card=1)
1 INDEX UNIQUE SCAN FND_NEW_MESSAGES_PK (cr=3 pr=1 pw=0 time=6386 us cost=1 size=0 card=1)(object id 34367)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 4 0.00 0.03
DELETE FROM MO_GLOB_ORG_ACCESS_TMP
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.02 3 4 4 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 3 4 4 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
0 DELETE MO_GLOB_ORG_ACCESS_TMP (cr=4 pr=3 pw=0 time=29161 us)
1 TABLE ACCESS FULL MO_GLOB_ORG_ACCESS_TMP (cr=3 pr=2 pw=0 time=18165 us cost=2 size=13 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 3 0.01 0.02
SET TRANSACTION READ ONLY
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 0 0 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.01 0 0 0 0
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
begin Fnd_Concurrent.Init_Request; end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 148 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 148 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
log file sync 1 0.01 0.01
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
declare X0rv BOOLEAN; begin X0rv := FND_INSTALLATION.GET(:APPL_ID,
:DEP_APPL_ID, :STATUS, :INDUSTRY); :X0 := sys.diutil.bool_to_int(X0rv);
end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 9 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 9 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 8 0.00 0.00
SQL*Net message from client 8 0.00 0.00
begin fnd_global.bless_next_init('FND_PERMIT_0000');
fnd_global.initialize(:session_id, :user_id, :resp_id, :resp_appl_id,
:security_group_id, :site_id, :login_id, :conc_login_id, :prog_appl_id,
:conc_program_id, :conc_request_id, :conc_priority_request, :form_id,
:form_application_id, :conc_process_id, :conc_queue_id, :queue_appl_id,
:server_id); fnd_profile.put('ORG_ID', :org_id);
fnd_profile.put('MFG_ORGANIZATION_ID', :mfg_org_id);
fnd_profile.put('MFG_CHART_OF_ACCOUNTS_ID', :coa);
fnd_profile.put('APPS_MAINTENANCE_MODE', :amm); end;
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 8 0 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 8 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 1 0.00 0.00
SQL*Net message from client 1 0.00 0.00
SELECT FPI.STATUS, FPI.INDUSTRY, FPI.PRODUCT_VERSION, FOU.ORACLE_USERNAME,
FPI.TABLESPACE, FPI.INDEX_TABLESPACE, FPI.TEMPORARY_TABLESPACE,
FPI.SIZING_FACTOR
FROM
FND_PRODUCT_INSTALLATIONS FPI, FND_ORACLE_USERID FOU, FND_APPLICATION FA
WHERE FPI.APPLICATION_ID = FA.APPLICATION_ID AND FPI.ORACLE_ID =
FOU.ORACLE_ID AND FA.APPLICATION_SHORT_NAME = :B1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 2 0.00 0.00 0 7 0 1
total 4 0.00 0.00 0 7 0 1
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=7 pr=0 pw=0 time=89 us)
1 NESTED LOOPS (cr=6 pr=0 pw=0 time=93 us cost=4 size=76 card=1)
1 NESTED LOOPS (cr=5 pr=0 pw=0 time=77 us cost=3 size=67 card=1)
1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=19 us cost=1 size=9 card=1)
1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
1 TABLE ACCESS BY INDEX ROWID FND_PRODUCT_INSTALLATIONS (cr=3 pr=0 pw=0 time=51 us cost=2 size=58 card=1)
1 INDEX RANGE SCAN FND_PRODUCT_INSTALLATIONS_PK (cr=2 pr=0 pw=0 time=27 us cost=1 size=0 card=1)(object id 22583)
1 INDEX UNIQUE SCAN FND_ORACLE_USERID_U1 (cr=1 pr=0 pw=0 time=7 us cost=0 size=0 card=1)(object id 22597)
1 TABLE ACCESS BY INDEX ROWID FND_ORACLE_USERID (cr=1 pr=0 pw=0 time=7 us cost=1 size=9 card=1)
SELECT P.PID, P.SPID, AUDSID, PROCESS, SUBSTR(USERENV('LANGUAGE'), INSTR(
USERENV('LANGUAGE'), '.') + 1)
FROM
V$SESSION S, V$PROCESS P WHERE P.ADDR = S.PADDR AND S.AUDSID =
USERENV('SESSIONID')
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.00 0 0 0 1
total 3 0.00 0.00 0 0 0 1
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 173 (recursive depth: 1)
Rows Row Source Operation
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1883 us cost=1 size=108 card=2)
1 HASH JOIN (cr=0 pr=0 pw=0 time=1869 us cost=1 size=100 card=2)
1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1059 us cost=0 size=58 card=2)
182 FIXED TABLE FULL X$KSLWT (cr=0 pr=0 pw=0 time=285 us cost=0 size=1288 card=161)
1 FIXED TABLE FIXED INDEX X$KSUSE (ind:1) (cr=0 pr=0 pw=0 time=617 us cost=0 size=21 card=1)
181 FIXED TABLE FULL X$KSUPR (cr=0 pr=0 pw=0 time=187 us cost=0 size=10500 card=500)
1 FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=4 us cost=0 size=4 card=1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 2 0.00 0.00
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 6 0.00 0.00 0 0 0 0
Execute 6 0.01 0.02 0 165 0 4
Fetch 1 0.00 0.00 0 0 0 1
total 13 0.01 0.02 0 165 0 5
Misses in library cache during parse: 0
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 37 0.00 0.00
SQL*Net message from client 37 1.21 2.19
log file sync 1 0.01 0.01
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 49 0.00 0.00 0 0 0 0
Execute 89 0.01 0.07 7 38 336 24
Fetch 29 0.00 0.09 15 168 0 27
total 167 0.02 0.16 22 206 336 51
Misses in library cache during parse: 3
Misses in library cache during execute: 1
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
asynch descriptor resize 6 0.00 0.00
db file sequential read 22 0.01 0.14
48 user SQL statements in session.
1 internal SQL statements in session.
49 SQL statements in session.
0 statements EXPLAINed in this session.
Trace file compatibility: 10.01.00
Sort options: prsela exeela fchela
1 session in tracefile.
48 user SQL statements in trace file.
1 internal SQL statements in trace file.
49 SQL statements in trace file.
48 unique SQL statements in trace file.
928 lines in trace file.
1338833753 elapsed seconds in trace file. -
Report rdf with size 8mb taking more time to open
Hello All,
I have a rdf ( reports 6i) report with size 8.5mb taking more time to open and more time to access each field.
Please let me know how do i solve this issue.
Please do the needful.
Thanks.Thanks for immediate response.
pls let me know how do i know this.
Right now i have the below details from report->help
Report Builder 6.0.8.11.3
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.11.0
Oracle ORACLE PL/SQL V8.0.6.0.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.10.2
Oracle Tools Common Area 6.0.5.32.1
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.35.0
Resource Object Store 6.0.5.0.1
Oracle Help 6.0.5.35.0
Oracle Sqlmgr 6.0.8.11.3
Oracle Query Builder 6.0.7.0.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.11.3
Oracle Express 6.0.8.3.5
Oracle XML Parser 1.0.2.1.0 Production
Oracle Virtual Graphics System 6.0.5.35.0
Oracle Image 6.0.5.34.0
Oracle Multimedia Widget 6.0.5.34.0
Oracle Tools GUI Utilities 6.0.5.35.0
Thanks
Edited by: Abdul Khan on Jan 26, 2010 11:54 PM -
Create index is taking more time
Hi,
One of the concurrent program is taking more time , We generate the trace file and found that the create index is taking more time.
Below is from the trace file and such type of index creation is happening lot of time in Oracle standard program.
Can somebody let me know why there is a big difference between cpu and elapse time.
We are seeing the PX Deq: Execute Reply Event as well.look idle time for database.
Please let me know which parameter of the database is affecting this.
CREATE INDEX ITEM_CATEGORIES_N2_BD9 ON ITEM_CATEGORIES_BD9(CATEGORY_SET_ID,
SR_CATEGORY_ID,ORGANIZATION_ID,SR_INSTANCE_ID) PARALLEL TABLESPACE MSCX
STORAGE( INITIAL 40960 NEXT 33554432 PCTINCREASE 0) PCTFREE 10 INITRANS 11
MAXTRANS 255
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 3 0 0
Execute 1 0.35 364.82 131168 117945 60324 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.35 364.83 131168 117948 60324 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 80 (recursive depth: 2)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
reliable message 1 0.00 0.00
enq: KO - fast object checkpoint 1 0.01 0.01
PX Deq: Join ACK 6 0.00 0.00
PX Deq Credit: send blkd 112 0.00 0.01
PX qref latch 7 0.00 0.00
PX Deq: Parse Reply 3 0.00 0.00
PX Deq: Execute Reply 604 1.96 364.42
log file sync 1 0.00 0.00
PX Deq: Signal ACK 1 0.00 0.00
latch: session allocation 2 0.00 0.00
Regards,user12121524 wrote:
CREATE INDEX ITEM_CATEGORIES_N2_BD9 ON ITEM_CATEGORIES_BD9(CATEGORY_SET_ID,
SR_CATEGORY_ID,ORGANIZATION_ID,SR_INSTANCE_ID) PARALLEL TABLESPACE MSCX
STORAGE( INITIAL 40960 NEXT 33554432 PCTINCREASE 0) PCTFREE 10 INITRANS 11
MAXTRANS 255
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 3 0 0
Execute 1 0.35 364.82 131168 117945 60324 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.35 364.83 131168 117948 60324 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 80 (recursive depth: 2)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
reliable message 1 0.00 0.00
enq: KO - fast object checkpoint 1 0.01 0.01
PX Deq: Join ACK 6 0.00 0.00
PX Deq Credit: send blkd 112 0.00 0.01
PX qref latch 7 0.00 0.00
PX Deq: Parse Reply 3 0.00 0.00
PX Deq: Execute Reply 604 1.96 364.42
log file sync 1 0.00 0.00
PX Deq: Signal ACK 1 0.00 0.00
latch: session allocation 2 0.00 0.00
What you've given us is the query co-ordinator trace, which basically tells us that the the coordinator waited 364 seconds for the PX slaves to tell it that they had completed their tasks ("PX Deq: Execute Reply" time). You need to look at the slave traces to find out where they spent their time - and that's probably not going to be easy if there are lots of parallel pieces of processing going on.
If you want to do some debugging (in general) one option is to add a query against V$pq_tqstat after each piece of parallel processing and log the results to a named file, or write them to a table with a tag, as this will tell you how many slaves were involved, how, and what the distribution of work and time was.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan -
Snapshot Refresh taking More Time
Dear All,
We are facing a Snapshot refresh problem currently in Production Environment.
Oracle Version : Oracle8i Enterprise Edition Release 8.1.6.1.0
Currently we have created a Snapshot on a Join with 2 remote tables using Synonyms.
ex:
CREATE SNAPSHOT XYZ REFRESH COMPLETE WITH ROWID
AS
SELECT a.* FROM SYN1 a, SYN2 b
Where b.ACCT_NO=a.ACCT_NO;
We have created a Index on the above Snapshot XYZ.
Create index XYZ_IDX1 on XYZ (ACCT_NO);
a. The Explain plan of the above query shows the Index Scan on SYN1.
If we query above Select Statement,it hardly takes 2 seconds to exedute.
b. But the Complete Refresh of Snapshot XYZ is almost taking 20 Mins for just truncating and inserting 500 records and is generating huge Disk Reads as SYN1 in remote table consists of 32 Million records whereas SYN2 contains only 500 Records.
If we truncate and insert inot a table as performed by the Complete refresh of Snapshot,it hardly takes 4 Seconds to refresh the table.
Please let me know what might be the possible reasons for the Complete refresh of Snapshot taking more time.Dear All,
While refreshing the Snapshot XYZ,I could find the following.
a. Sort/Merge operation was performed while inserting the data into Snapshot.
INSERT /*+ APPEND */ INTO "XYZ"
SELECT a.* FROM SYN1 a, SYN2 b Where b.ACCT_NO=a.ACCT_NO;
The above operation performed huge disk reads.
b. By Changing the session parameter sort_area_size ,the time decreased by 50% but still the disk reads are huge.
I would like to know why Sort/Merge Operation is performed in the above Insert?
Edited by: Prashanth Deshmukh on Mar 13, 2009 10:54 AM
Edited by: Prashanth Deshmukh on Mar 13, 2009 10:55 AM -
Expdp taking more time to start export
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
If share me tips and let me know the reason
Regards
Rabiuser623166 wrote:
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
I am not sure that this is enough information for us to suggest something. For starters, can you try selecting less tables than 120 and see what's going on?
Aman.... -
Taking more time in INDEX RANGE SCAN compare to the full table scan
Hi all ,
Below are the version og my database.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for HPUX: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I have gather the table statistics and plan change for sql statment.
SELECT P1.COMPANY, P1.PAYGROUP, P1.PAY_END_DT, P1.PAYCHECK_OPTION,
P1.OFF_CYCLE, P1.PAGE_NUM, P1.LINE_NUM, P1.SEPCHK FROM PS_PAY_CHECK P1
WHERE P1.FORM_ID = :1 AND P1.PAYCHECK_NBR = :2 AND
P1.CHECK_DT = :3 AND P1.PAYCHECK_OPTION <> 'R'
Plan before the gather stats.
Plan hash value: 3872726522
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | *14306* (100)| |
| 1 | *TABLE ACCESS FULL| PS_PAY_CHECK* | 1 | 51 | 14306 (4)| 00:02:52 |
Plan after the gather stats:
Operation Object Name Rows Bytes Cost
SELECT STATEMENT Optimizer Mode=CHOOSE
1 4
*TABLE ACCESS BY INDEX ROWID SYSADM.PS_PAY_CHECK* 1 51 *4*
*INDEX RANGE SCAN SYSADM.PS0PAY_CHECK* 1 3After gather stats paln look good . but when i am exeuting the query it take 5 hours. before the gather stats it finishing the within 2 hours. i do not want to restore my old statistics. below are the data for the tables.and when i am obserrving it lot of db files scatter rea
NAME TYPE VALUE
_optimizer_cost_based_transformation string OFF
filesystemio_options string asynch
object_cache_optimal_size integer 102400
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string choose
optimizer_secure_view_merging boolean TRUE
plsql_optimize_level integer 2
SQL> select count(*) from sysadm.ps_pay_check;
select num_rows,blocks from dba_tables where table_name ='PS_PAY_CHECK';
COUNT(*)
1270052
SQL> SQL> SQL>
NUM_ROWS BLOCKS
1270047 63166
Event Waits Time (s) (ms) Time Wait Class
db file sequential read 1,584,677 6,375 4 36.6 User I/O
db file scattered read 2,366,398 5,689 2 32.7 User I/Oplease let me know why it taking more time in INDEX RANGE SCAN compare to the full table scan?suresh.ratnaji wrote:
NAME TYPE VALUE
_optimizer_cost_based_transformation string OFF
filesystemio_options string asynch
object_cache_optimal_size integer 102400
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string choose
optimizer_secure_view_merging boolean TRUE
plsql_optimize_level integer 2
please let me know why it taking more time in INDEX RANGE SCAN compare to the full table scan?Suresh,
Any particular reason why you have a non-default value for a hidden parameter, optimizercost_based_transformation ?
On my 10.2.0.1 database, its default value is "linear". What happens when you reset the value of the hidden parameter to default? -
Scrollbar is taking more time to scroll in IE
Hi all,
I am using JDev11.1.1.6.0 and IE8.
I am having jsff page with 11 tables and i don't have individual scrolls for the tables, the scroll is only for the total page in both ways(horizontal and vertical). My problem here is, it is taking more time to scroll in IE8 and it is working in Mozilla.what i have to do in this issue.
Awaiting for Reply
Thanks...Hi,
How many records show in your grid,Some time you may need to tune up the VO
See for VO tune
VO Tuning Confusion or Misunderstood.
http://www.avromroyfaderman.com/2008/11/adf-bc-tuning-iv-view-objects-part-2/ -
LCM utility taking more time to start
Hi All,
In Hyperion System 9.3.1 when running the LCMUtility.bat file in Hyperion Home\BIPLUS\bin folder it is taking nearly 8-10 minutes to start up the process. The shared services, IR, Core services are in the single box. Even though it is taking time to initialize, it ends with success.
Could anyone please let me know what could be the possible reason why it is taking 8-10 minutes of time to start the process?
Thanks,
Sreeuser623166 wrote:
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
I am not sure that this is enough information for us to suggest something. For starters, can you try selecting less tables than 120 and see what's going on?
Aman.... -
Admin server taking more time to start
Hi All,
I installed OIM 11g R2 in windows server2008 ,
while starting the admin server it is taking the more time, .
Steps i have done.
changed memory parameters for setSOADomainEnv, setOIMDomainEnv, oimenv.bat files.
while starting the admin server it is showing the memory parameters are Xms768m.....xms1024m like that.
can anyone please suggest what changes needs to do to run fast
Thanks,
Valliuser623166 wrote:
Hi Gurus
my database oracle 10.2.0.3 in AIX
I have started expdp to export selective around 130 tables but it is taking more time to start , almost 20 min passed since it start.
$ expdp system/*** parfile=parfile.par
Export: Release 10.2.0.3.0 - 64bit Production on Friday, 22 June, 2012 17:21:26
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Starting "SYSTEM"."SYS_EXPORT_TABLE_02": system/******** parfile=parfile.par
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
I am not sure that this is enough information for us to suggest something. For starters, can you try selecting less tables than 120 and see what's going on?
Aman.... -
Clicking Drill Down Plus Sympol its taking more time
Hi ,
In my drill-down report having 2000 records while initially it takes 25 seconds to render the report after that when i click Plus symbol it takes again 20 secs to display the data.My question is in drill-down report for loading data it will hit one
time to fetch data.So why its taking more time while clicking plus symbol the data already exits in datasets.
So please tell me where i am doing mistake.
Regards,
HariKanHi HariKan,
According to your description, when you preview the drill down report, after you click plus sign, it takes 20 seconds to expand the detail information.
The total time to generate a reporting server report (RDL) can be divided into 3 elements:
TimeDataRetrieval: The time needed for SQL Server to retrieve the data of all datasets in your report.
TimeProcessing: The number of milliseconds spent in the processing engine for the request.
TimeRendering: The time spent after the Rendering Object Model is exposed to the rendering extension.
After you click plus sign, Report rendering occurs after data and layout are combined into an interim format and then passed to a rendering extension. The time includes:
Time spent in renderer.
Time spent in width and height of report items.
Time spent in paging.
Time spent in all expression evaluation.
For more information about report processing, please refer to the following document:
http://blogs.msdn.com/b/robertbruckner/archive/2009/01/05/executionlog2-view.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Query in timesten taking more time than query in oracle database
Hi,
Can anyone please explain me why query in timesten taking more time
than query in oracle database.
I am mentioning in detail what are my settings and what have I done
step by step.........
1.This is the table I created in Oracle datababase
(Oracle Database 10g Enterprise Edition Release 10.2.0.1.0)...
CREATE TABLE student (
id NUMBER(9) primary keY ,
first_name VARCHAR2(10),
last_name VARCHAR2(10)
2.THIS IS THE ANONYMOUS BLOCK I USE TO
POPULATE THE STUDENT TABLE(TOTAL 2599999 ROWS)...
declare
firstname varchar2(12);
lastname varchar2(12);
catt number(9);
begin
for cntr in 1..2599999 loop
firstname:=(cntr+8)||'f';
lastname:=(cntr+2)||'l';
if cntr like '%9999' then
dbms_output.put_line(cntr);
end if;
insert into student values(cntr,firstname, lastname);
end loop;
end;
3. MY DSN IS SET THE FOLLWING WAY..
DATA STORE PATH- G:\dipesh3repo\db
LOG DIRECTORY- G:\dipesh3repo\log
PERM DATA SIZE-1000
TEMP DATA SIZE-1000
MY TIMESTEN VERSION-
C:\Documents and Settings\dipesh>ttversion
TimesTen Release 7.0.3.0.0 (32 bit NT) (tt70_32:17000) 2007-09-19T16:04:16Z
Instance admin: dipesh
Instance home directory: G:\TimestTen\TT70_32
Daemon home directory: G:\TimestTen\TT70_32\srv\info
THEN I CONNECT TO THE TIMESTEN DATABASE
C:\Documents and Settings\dipesh> ttisql
command>connect "dsn=dipesh3;oraclepwd=tiger";
4. THEN I START THE AGENT
call ttCacheUidPwdSet('SCOTT','TIGER');
Command> CALL ttCacheStart();
5.THEN I CREATE THE READ ONLY CACHE GROUP AND LOAD IT
create readonly cache group rc_student autorefresh
interval 5 seconds from student
(id int not null primary key, first_name varchar2(10), last_name varchar2(10));
load cache group rc_student commit every 100 rows;
6.NOW I CAN ACCESS THE TABLES FROM TIMESTEN AND PERFORM THE QUERY
I SET THE TIMING..
command>TIMING 1;
consider this query now..
Command> select * from student where first_name='2155666f';
< 2155658, 2155666f, 2155660l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.668822 seconds.
another query-
Command> SELECT * FROM STUDENTS WHERE FIRST_NAME='2340009f';
2206: Table SCOTT.STUDENTS not found
Execution time (SQLPrepare) = 0.074964 seconds.
The command failed.
Command> SELECT * FROM STUDENT where first_name='2093434f';
< 2093426, 2093434f, 2093428l >
1 row found.
Execution time (SQLExecute + Fetch Loop) = 0.585897 seconds.
Command>
7.NOW I PERFORM THE SIMILAR QUERIES FROM SQLPLUS...
SQL> SELECT * FROM STUDENT WHERE FIRST_NAME='1498671f';
ID FIRST_NAME LAST_NAME
1498663 1498671f 1498665l
Elapsed: 00:00:00.15
Can anyone please explain me why query in timesten taking more time
that query in oracle database.
Message was edited by: Dipesh Majumdar
user542575
Message was edited by:
user542575TimesTen
Hardware: Windows Server 2003 R2 Enterprise x64; 8 x Dual-core AMD 8216 2.41GHz processors; 32 GB RAM
Version: 7.0.4.0.0 64 bit
Schema:
create usermanaged cache group factCache from
MV_US_DATAMART
ORDER_DATE DATE,
IF_SYSTEM VARCHAR2(32) NOT NULL,
GROUPING_ID TT_BIGINT,
TIME_DIM_ID TT_INTEGER NOT NULL,
BUSINESS_DIM_ID TT_INTEGER NOT NULL,
ACCOUNT_DIM_ID TT_INTEGER NOT NULL,
ORDERTYPE_DIM_ID TT_INTEGER NOT NULL,
INSTR_DIM_ID TT_INTEGER NOT NULL,
EXECUTION_DIM_ID TT_INTEGER NOT NULL,
EXEC_EXCHANGE_DIM_ID TT_INTEGER NOT NULL,
NO_ORDERS TT_BIGINT,
FILLED_QUANTITY TT_BIGINT,
CNT_FILLED_QUANTITY TT_BIGINT,
QUANTITY TT_BIGINT,
CNT_QUANTITY TT_BIGINT,
COMMISSION BINARY_FLOAT,
CNT_COMMISSION TT_BIGINT,
FILLS_NUMBER TT_BIGINT,
CNT_FILLS_NUMBER TT_BIGINT,
AGGRESSIVE_FILLS TT_BIGINT,
CNT_AGGRESSIVE_FILLS TT_BIGINT,
NOTIONAL BINARY_FLOAT,
CNT_NOTIONAL TT_BIGINT,
TOTAL_PRICE BINARY_FLOAT,
CNT_TOTAL_PRICE TT_BIGINT,
CANCELLED_ORDERS_COUNT TT_BIGINT,
CNT_CANCELLED_ORDERS_COUNT TT_BIGINT,
ROUTED_ORDERS_NO TT_BIGINT,
CNT_ROUTED_ORDERS_NO TT_BIGINT,
ROUTED_LIQUIDITY_QTY TT_BIGINT,
CNT_ROUTED_LIQUIDITY_QTY TT_BIGINT,
REMOVED_LIQUIDITY_QTY TT_BIGINT,
CNT_REMOVED_LIQUIDITY_QTY TT_BIGINT,
ADDED_LIQUIDITY_QTY TT_BIGINT,
CNT_ADDED_LIQUIDITY_QTY TT_BIGINT,
AGENT_CHARGES BINARY_FLOAT,
CNT_AGENT_CHARGES TT_BIGINT,
CLEARING_CHARGES BINARY_FLOAT,
CNT_CLEARING_CHARGES TT_BIGINT,
EXECUTION_CHARGES BINARY_FLOAT,
CNT_EXECUTION_CHARGES TT_BIGINT,
TRANSACTION_CHARGES BINARY_FLOAT,
CNT_TRANSACTION_CHARGES TT_BIGINT,
ORDER_MANAGEMENT BINARY_FLOAT,
CNT_ORDER_MANAGEMENT TT_BIGINT,
SETTLEMENT_CHARGES BINARY_FLOAT,
CNT_SETTLEMENT_CHARGES TT_BIGINT,
RECOVERED_AGENT BINARY_FLOAT,
CNT_RECOVERED_AGENT TT_BIGINT,
RECOVERED_CLEARING BINARY_FLOAT,
CNT_RECOVERED_CLEARING TT_BIGINT,
RECOVERED_EXECUTION BINARY_FLOAT,
CNT_RECOVERED_EXECUTION TT_BIGINT,
RECOVERED_TRANSACTION BINARY_FLOAT,
CNT_RECOVERED_TRANSACTION TT_BIGINT,
RECOVERED_ORD_MGT BINARY_FLOAT,
CNT_RECOVERED_ORD_MGT TT_BIGINT,
RECOVERED_SETTLEMENT BINARY_FLOAT,
CNT_RECOVERED_SETTLEMENT TT_BIGINT,
CLIENT_AGENT BINARY_FLOAT,
CNT_CLIENT_AGENT TT_BIGINT,
CLIENT_ORDER_MGT BINARY_FLOAT,
CNT_CLIENT_ORDER_MGT TT_BIGINT,
CLIENT_EXEC BINARY_FLOAT,
CNT_CLIENT_EXEC TT_BIGINT,
CLIENT_TRANS BINARY_FLOAT,
CNT_CLIENT_TRANS TT_BIGINT,
CLIENT_CLEARING BINARY_FLOAT,
CNT_CLIENT_CLEARING TT_BIGINT,
CLIENT_SETTLE BINARY_FLOAT,
CNT_CLIENT_SETTLE TT_BIGINT,
CHARGEABLE_TAXES BINARY_FLOAT,
CNT_CHARGEABLE_TAXES TT_BIGINT,
VENDOR_CHARGE BINARY_FLOAT,
CNT_VENDOR_CHARGE TT_BIGINT,
ROUTING_CHARGES BINARY_FLOAT,
CNT_ROUTING_CHARGES TT_BIGINT,
RECOVERED_ROUTING BINARY_FLOAT,
CNT_RECOVERED_ROUTING TT_BIGINT,
CLIENT_ROUTING BINARY_FLOAT,
CNT_CLIENT_ROUTING TT_BIGINT,
TICKET_CHARGES BINARY_FLOAT,
CNT_TICKET_CHARGES TT_BIGINT,
RECOVERED_TICKET_CHARGES BINARY_FLOAT,
CNT_RECOVERED_TICKET_CHARGES TT_BIGINT,
PRIMARY KEY(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID, INSTR_DIM_ID, EXECUTION_DIM_ID,EXEC_EXCHANGE_DIM_ID),
READONLY);
No of rows: 2228558
Config:
< CkptFrequency, 600 >
< CkptLogVolume, 0 >
< CkptRate, 0 >
< ConnectionCharacterSet, US7ASCII >
< ConnectionName, tt_us_dma >
< Connections, 64 >
< DataBaseCharacterSet, AL32UTF8 >
< DataStore, e:\andrew\datacache\usDMA >
< DurableCommits, 0 >
< GroupRestrict, <NULL> >
< LockLevel, 0 >
< LockWait, 10 >
< LogBuffSize, 65536 >
< LogDir, e:\andrew\datacache\ >
< LogFileSize, 64 >
< LogFlushMethod, 1 >
< LogPurge, 0 >
< Logging, 1 >
< MemoryLock, 0 >
< NLS_LENGTH_SEMANTICS, BYTE >
< NLS_NCHAR_CONV_EXCP, 0 >
< NLS_SORT, BINARY >
< OracleID, NYCATP1 >
< PassThrough, 0 >
< PermSize, 4000 >
< PermWarnThreshold, 90 >
< PrivateCommands, 0 >
< Preallocate, 0 >
< QueryThreshold, 0 >
< RACCallback, 0 >
< SQLQueryTimeout, 0 >
< TempSize, 514 >
< TempWarnThreshold, 90 >
< Temporary, 1 >
< TransparentLoad, 0 >
< TypeMode, 0 >
< UID, OS_OWNER >
ORACLE:
Hardware: Sunos 5.10; 24x1.8Ghz (unsure of type); 82 GB RAM
Version 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Schema:
CREATE MATERIALIZED VIEW OS_OWNER.MV_US_DATAMART
TABLESPACE TS_OS
PARTITION BY RANGE (ORDER_DATE)
PARTITION MV_US_DATAMART_MINVAL VALUES LESS THAN (TO_DATE(' 2007-11-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D1 VALUES LESS THAN (TO_DATE(' 2007-11-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D2 VALUES LESS THAN (TO_DATE(' 2007-11-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_NOV_D3 VALUES LESS THAN (TO_DATE(' 2007-12-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D1 VALUES LESS THAN (TO_DATE(' 2007-12-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D2 VALUES LESS THAN (TO_DATE(' 2007-12-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_07_DEC_D3 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D1 VALUES LESS THAN (TO_DATE(' 2008-01-11 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D2 VALUES LESS THAN (TO_DATE(' 2008-01-21 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_08_JAN_D3 VALUES LESS THAN (TO_DATE(' 2008-02-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
LOGGING
NOCOMPRESS
TABLESPACE TS_OS,
PARTITION MV_US_DATAMART_MAXVAL VALUES LESS THAN (MAXVALUE)
LOGGING
NOCOMPRESS
TABLESPACE TS_OS
NOCACHE
NOCOMPRESS
NOPARALLEL
BUILD DEFERRED
USING INDEX
TABLESPACE TS_OS_INDEX
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT order_date, if_system,
GROUPING_ID (order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id
) GROUPING_ID,
/* ============ DIMENSIONS ============ */
time_dim_id, business_dim_id, account_dim_id, ordertype_dim_id,
instr_dim_id, execution_dim_id, exec_exchange_dim_id,
/* ============ MEASURES ============ */
-- o.FX_RATE /* FX_RATE */,
COUNT (*) no_orders,
-- SUM(NO_ORDERS) NO_ORDERS,
-- COUNT(NO_ORDERS) CNT_NO_ORDERS,
SUM (filled_quantity) filled_quantity,
COUNT (filled_quantity) cnt_filled_quantity, SUM (quantity) quantity,
COUNT (quantity) cnt_quantity, SUM (commission) commission,
COUNT (commission) cnt_commission, SUM (fills_number) fills_number,
COUNT (fills_number) cnt_fills_number,
SUM (aggressive_fills) aggressive_fills,
COUNT (aggressive_fills) cnt_aggressive_fills,
SUM (fx_rate * filled_quantity * average_price) notional,
COUNT (fx_rate * filled_quantity * average_price) cnt_notional,
SUM (fx_rate * fills_number * average_price) total_price,
COUNT (fx_rate * fills_number * average_price) cnt_total_price,
SUM (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END) cancelled_orders_count,
COUNT (CASE
WHEN order_status = 'C'
THEN 1
ELSE 0
END
) cnt_cancelled_orders_count,
-- SUM(t.FX_RATE*t.NO_FILLS*t.AVG_PRICE) AVERAGE_PRICE,
-- SUM(FILLS_NUMBER*AVERAGE_PRICE) STAGING_AVERAGE_PRICE,
-- COUNT(FILLS_NUMBER*AVERAGE_PRICE) CNT_STAGING_AVERAGE_PRICE,
SUM (routed_orders_no) routed_orders_no,
COUNT (routed_orders_no) cnt_routed_orders_no,
SUM (routed_liquidity_qty) routed_liquidity_qty,
COUNT (routed_liquidity_qty) cnt_routed_liquidity_qty,
SUM (removed_liquidity_qty) removed_liquidity_qty,
COUNT (removed_liquidity_qty) cnt_removed_liquidity_qty,
SUM (added_liquidity_qty) added_liquidity_qty,
COUNT (added_liquidity_qty) cnt_added_liquidity_qty,
SUM (agent_charges) agent_charges,
COUNT (agent_charges) cnt_agent_charges,
SUM (clearing_charges) clearing_charges,
COUNT (clearing_charges) cnt_clearing_charges,
SUM (execution_charges) execution_charges,
COUNT (execution_charges) cnt_execution_charges,
SUM (transaction_charges) transaction_charges,
COUNT (transaction_charges) cnt_transaction_charges,
SUM (order_management) order_management,
COUNT (order_management) cnt_order_management,
SUM (settlement_charges) settlement_charges,
COUNT (settlement_charges) cnt_settlement_charges,
SUM (recovered_agent) recovered_agent,
COUNT (recovered_agent) cnt_recovered_agent,
SUM (recovered_clearing) recovered_clearing,
COUNT (recovered_clearing) cnt_recovered_clearing,
SUM (recovered_execution) recovered_execution,
COUNT (recovered_execution) cnt_recovered_execution,
SUM (recovered_transaction) recovered_transaction,
COUNT (recovered_transaction) cnt_recovered_transaction,
SUM (recovered_ord_mgt) recovered_ord_mgt,
COUNT (recovered_ord_mgt) cnt_recovered_ord_mgt,
SUM (recovered_settlement) recovered_settlement,
COUNT (recovered_settlement) cnt_recovered_settlement,
SUM (client_agent) client_agent,
COUNT (client_agent) cnt_client_agent,
SUM (client_order_mgt) client_order_mgt,
COUNT (client_order_mgt) cnt_client_order_mgt,
SUM (client_exec) client_exec, COUNT (client_exec) cnt_client_exec,
SUM (client_trans) client_trans,
COUNT (client_trans) cnt_client_trans,
SUM (client_clearing) client_clearing,
COUNT (client_clearing) cnt_client_clearing,
SUM (client_settle) client_settle,
COUNT (client_settle) cnt_client_settle,
SUM (chargeable_taxes) chargeable_taxes,
COUNT (chargeable_taxes) cnt_chargeable_taxes,
SUM (vendor_charge) vendor_charge,
COUNT (vendor_charge) cnt_vendor_charge,
SUM (routing_charges) routing_charges,
COUNT (routing_charges) cnt_routing_charges,
SUM (recovered_routing) recovered_routing,
COUNT (recovered_routing) cnt_recovered_routing,
SUM (client_routing) client_routing,
COUNT (client_routing) cnt_client_routing,
SUM (ticket_charges) ticket_charges,
COUNT (ticket_charges) cnt_ticket_charges,
SUM (recovered_ticket_charges) recovered_ticket_charges,
COUNT (recovered_ticket_charges) cnt_recovered_ticket_charges
FROM us_datamart_raw
GROUP BY order_date,
if_system,
business_dim_id,
time_dim_id,
account_dim_id,
ordertype_dim_id,
instr_dim_id,
execution_dim_id,
exec_exchange_dim_id;
-- Note: Index I_SNAP$_MV_US_DATAMART will be created automatically
-- by Oracle with the associated materialized view.
CREATE UNIQUE INDEX OS_OWNER.MV_US_DATAMART_UDX ON OS_OWNER.MV_US_DATAMART
(ORDER_DATE, TIME_DIM_ID, BUSINESS_DIM_ID, ACCOUNT_DIM_ID, ORDERTYPE_DIM_ID,
INSTR_DIM_ID, EXECUTION_DIM_ID, EXEC_EXCHANGE_DIM_ID)
NOLOGGING
NOPARALLEL
COMPRESS 7;
No of rows: 2228558
The query (taken Mondrian) I run against each of them is:
select sum("MV_US_DATAMART"."NOTIONAL") as "m0"
--, sum("MV_US_DATAMART"."FILLED_QUANTITY") as "m1"
--, sum("MV_US_DATAMART"."AGENT_CHARGES") as "m2"
--, sum("MV_US_DATAMART"."CLEARING_CHARGES") as "m3"
--, sum("MV_US_DATAMART"."EXECUTION_CHARGES") as "m4"
--, sum("MV_US_DATAMART"."TRANSACTION_CHARGES") as "m5"
--, sum("MV_US_DATAMART"."ROUTING_CHARGES") as "m6"
--, sum("MV_US_DATAMART"."ORDER_MANAGEMENT") as "m7"
--, sum("MV_US_DATAMART"."SETTLEMENT_CHARGES") as "m8"
--, sum("MV_US_DATAMART"."COMMISSION") as "m9"
--, sum("MV_US_DATAMART"."RECOVERED_AGENT") as "m10"
--, sum("MV_US_DATAMART"."RECOVERED_CLEARING") as "m11"
--,sum("MV_US_DATAMART"."RECOVERED_EXECUTION") as "m12"
--,sum("MV_US_DATAMART"."RECOVERED_TRANSACTION") as "m13"
--, sum("MV_US_DATAMART"."RECOVERED_ROUTING") as "m14"
--, sum("MV_US_DATAMART"."RECOVERED_ORD_MGT") as "m15"
--, sum("MV_US_DATAMART"."RECOVERED_SETTLEMENT") as "m16"
--, sum("MV_US_DATAMART"."RECOVERED_TICKET_CHARGES") as "m17"
--,sum("MV_US_DATAMART"."TICKET_CHARGES") as "m18"
--, sum("MV_US_DATAMART"."VENDOR_CHARGE") as "m19"
from "OS_OWNER"."MV_US_DATAMART" "MV_US_DATAMART"
where I uncomment a column at a time and rerun. I improved the TimesTen results since my first post, by retyping the NUMBER columns to BINARY_FLOAT. The results I got were:
No Columns ORACLE TimesTen
1 1.05 0.94
2 1.07 1.47
3 2.04 1.8
4 2.06 2.08
5 2.09 2.4
6 3.01 2.67
7 4.02 3.06
8 4.03 3.37
9 4.04 3.62
10 4.06 4.02
11 4.08 4.31
12 4.09 4.61
13 5.01 4.76
14 5.02 5.06
15 5.04 5.25
16 5.05 5.48
17 5.08 5.84
18 6 6.21
19 6.02 6.34
20 6.04 6.75 -
CDP Performance Issue-- Taking more time fetch data
Hi,
I'm working on Stellent 7.5.1.
For one of the portlet in portal its taking more time to fetch data. Please can some one help me to solve this issue.. So that performance can be improved.. Please kindly provide me solution.. This is my code for fetching data from the server....
public void getManager(final HashMap binderMap)
throws VistaInvalidInputException, VistaDataNotFoundException,
DataException, ServiceException, VistaTemplateException
String collectionID =
getStringLocal(VistaFolderConstants.FOLDER_ID_KEY);
long firstStartTime = System.currentTimeMillis();
HashMap resultSetMap = null;
String isNonRecursive = getStringLocal(VistaFolderConstants
.ISNONRECURSIVE_KEY);
if (isNonRecursive != null
&& isNonRecursive.equalsIgnoreCase(
VistaContentFetchHelperConstants.STRING_TRUE))
VistaLibraryContentFetchManager libraryContentFetchManager =
new VistaLibraryContentFetchManager(
binderMap);
SystemUtils.trace(
VistaContentFetchHelperConstants.CONTENT_FETCH_TRACE,
"The input Parameters for Content Fetch = "
+ binderMap);
resultSetMap = libraryContentFetchManager
.getFolderContentItems(m_workspace);
* used to add the resultset to the binder.
addResultSetToBinder(resultSetMap , true);
else
long startTime = System.currentTimeMillis();
* isStandard is used to decide the call is for Standard or
* Extended.
SystemUtils.trace(
VistaContentFetchHelperConstants.CONTENT_FETCH_TRACE,
"The input Parameters for Content Fetch = "
+ binderMap);
String isStandard = getTemplateInformation(binderMap);
long endTimeTemplate = System.currentTimeMillis();
binderMap.put(VistaFolderConstants.IS_STANDARD,
isStandard);
long endTimebinderMap = System.currentTimeMillis();
VistaContentFetchManager contentFetchManager
= new VistaContentFetchManager(binderMap);
long endTimeFetchManager = System.currentTimeMillis();
resultSetMap = contentFetchManager
.getAllFolderContentItems(m_workspace);
long endTimeresultSetMap = System.currentTimeMillis();
* used to add the resultset and the total no of content items
* to the binder.
addResultSetToBinder(resultSetMap , false);
long endTime = System.currentTimeMillis();
if (perfLogEnable.equalsIgnoreCase("true"))
Log.info("Time taken to execute " +
"getTemplateInformation=" +
(endTimeTemplate - startTime)+
"ms binderMap=" +
(endTimebinderMap - startTime)+
"ms contentFetchManager=" +
(endTimeFetchManager - startTime)+
"ms resultSetMap=" +
(endTimeresultSetMap - startTime) +
"ms getManager:getAllFolderContentItems = " +
(endTime - startTime) +
"ms overallTime=" +
(endTime - firstStartTime) +
"ms folderID =" +
collectionID);
Edited by: 838623 on Feb 22, 2011 1:43 AMHi.
The Select statment accessing MSEG Table is Slow Many a times.
To Improve the performance of MSEG.
1.Check for the proper notes in the Service Market Place if you are working for CIN version.
2.Index the MSEG table
2.Check and limit the Columns in the Select statment .
Possible Way.
SELECT MBLNR MJAHR ZEILE BWART MATNR WERKS LIFNR MENGE MEINS
EBELN EBELP LGORT SMBLN BUKRS GSBER INSMK XAUTO
FROM MSEG
INTO CORRESPONDING FIELDS OF TABLE ITAB
WHERE WERKS EQ P_WERKS AND
MBLNR IN S_MBLNR AND
BWART EQ '105' .
Delete itab where itab EQ '5002361303'
Delete itab where itab EQ '5003501080'
Delete itab where itab EQ '5002996300'
Delete itab where itab EQ '5002996407'
Delete itab where itab EQ '5003587026'
Delete itab where itab EQ '5003587026'
Delete itab where itab EQ '5003493186'
Delete itab where itab EQ '5002720583'
Delete itab where itab EQ '5002928122'
Delete itab where itab EQ '5002628263'.
Select
Regards
Bala.M
Edited by: Bala Malvatu on Feb 7, 2008 9:18 PM -
XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD
HI
XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD.
The sql has 5 union clauses.
It takes 20-30 minutes in TOAD compared to running through Concurrent Program in XML Publisher in EBS taking around 4-5 hours.
The Scalable Flag at report level is turned on with the JVM options set to -Xmx1024m -Xmx1024m in Concurrent Program definition.
Other configurations for Data Template like XSLT, Scalable, Optimization are turned on though didn't bounce the OPP Server for these to take effect as I am not sure whether it is needed.
Thanks in advance for your help.But the question is that how come it is working in TOAD and takes only 15-20 minutes?
with initialization of session ?
what about sqlplus ?
Do I have to set up the the temp directory for the XML Publisher report to make it faster?
look at
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues (Doc ID 1410160.1)
BI Publisher - Troubleshooting Oracle Business Intelligence (XML) Publisher For The Oracle E-Business Suite (Doc ID 364547.1)
Maybe you are looking for
-
I have an older iPod universal dock that has a S-Video cable outlet, as well as the 'normal' 3.5mm line-out and connector. There is no IR window (sensor) on the front, therefore, I presume that a standard Apple Remote will not work. My questions are:
-
My Macbook Pro is not connecting to the network and reads no airport card installed
This morning all of a sudden my mac has no network connection. When I run the cursor over the area to select it reads that no airport card is installed. I was online last night nd everything was fine. Thank you in advance for your help.
-
"Multiple Tempo Events Detected" -- Propblem with Logic and Reason
I have just migrated from a MacBookProp to a MacPro. All seems well except for the rewiring of Reason. When I rewire, I get the error message in Logic "Multiple Tempo Events Selected" asking if I want to review the list. Since no song is open in Reas
-
TS3297 itunes store keeps opening up randomly
why does the itunes store keep opening up randomly
-
Complete History of a message transport from sender to the reciever.
Hi, we had a previous issue of queues getting stuck, and we have scheduled the report 'RSQIWKEX' to reprocess them at regular intervals, and now we have the queues running smoothly. But Our client wants us to get to the bottom of the topic as to why