Remote Office with Location tracking and WIPS

Hey guys,
I have a question about Cisco wireless for remote offices. My client is switching to Cisco for their wireless. The services that is going to be needed are location tracking and WIPS and data. The data part may come later and it is not approved yet. For now, it is going to be just location tracking for rogue devices etc and wIPS.
I know for data we can do Flexconnect, but for location tracking and wIPS, how are we going to deploy this? Does Flexconnect APs would be able to do LBS and wIPS services and data?
We currently have Moto APs deployed with 3 radios which is capable of LBS, wIPS, and data. Basically, the 3rd radio does the LBS and wIPS. Also, we are using the RF-Domain Manager per branch office. I am not sure if Cisco has something similar.
Thanks

So, you could do FlexConnect for the remote offices, but RLDP (wired detection) might not work:
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b3690b.shtml#anc8
Domain Manager should be similar to PI:
http://www.cisco.com/en/US/products/ps12239/
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Similar Messages

  • Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 Other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1.

    Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1 though.  Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010.  So it's a one-way problem.

    Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1 though.  Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010.  So it's a one-way problem.

  • In iTunes, is there any way to play one song at at time and have the song stop at its end.  I want to play guitar with a track and have that track stop playing rather than going to the next song.

    I want to play a single song in iTunes on my ipad and have the track stop when the song finishes, rather than itunes playing the next track.  I play guitar with the track and need iTunes to stop at the end of the song.
    I have worked around this issue by creating a separate play list for each song, then inserting the song into the play list.  I would like to find a more straight forward solution that would eliminate this extra step.  On my PC, I use QuickTime to bring up an individual song and then can play one track at a time.
    Thanks!

    On the IPod if the shuffle icon is colored blue it is ON, if it is colored white it is OFF. This control is global, if it is ON any album or list will be shuffled.

  • Burn MP3 disc with just tracks and no folders

    You Guys Rock!!!
    I would like to know how to burn an MP3 disc with just tracks and no folders. Right now, all songs show up as foler 1 song 1,2,3 --- then it will go folder 2 track 1,2,3,4 etc. I want to get it to simply read track 1,2,3,4,5,6,7 etc. all the way through the disc.
    I typically get 80 songs on a standard CD-R disc. There may be 30 folders all with 2 or 3 songs within them. It is very confusing to scan through to the track I want to hear next.
    Any help will be greatly appreciated!!!
    J
    Dell Dimension 3000   Windows XP  

    Select the playlist then click on the Name cloumn & burn the CD.
    If you sort by Artist it will put them into Artist/Album folders.
    If you sort by Album, it will put them into Album folders.
    get iTunes to burn with no sub-folders (ie, CD/Rock or CD/Pop and not CD/Rock/The Eagles/Take It Easy.mp3)?
    Never seen it burn into Genre folders./Album folders...

  • I made a project with multiple tracks and had it all panned and mixed.  Now it's only playing in the right speaker.  Not even regestering a left side in the master volume?  What happened, how can I get both sides back?

    I made a project with multiple tracks and had it all panned and mixed.  Now it's only playing in the right speaker.  Not even regestering a left side in the master volume?  What happened, how can I get both sides back?

    Thank you for that info.
    For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
    There are two issues with that file:
    The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
    Good luck,
    Hunt

  • ITunes 11.1.3.8 on Windows 8.1 64 bit display problems with CD tracks and Internet Radio

    Recently installed iTunes 11.1.3.8 on a Windows 8.1 64 bit machine and I have the following problems:
    1) Inserting a CD in order to listen or import tracks I get no display of tracks when I click the CD drive in the side bar. The list has only white and gray lines where the tracks should have been listed and the top of the table contains some grabbed display from Music table (i.e. the first track that was displayed in Music but only 2/3 of the line. The status bar at the bottom of the iTunes window shows correct information about the number of tracks and total playing time.
    2) Hitting the play button while on this CD Drive listing starts the playback but the tracks play in random sequence even though shuffle play is not selected (not blue to be precise). In the zone with track name, playback progress, elapsed and remaining time and other track options the indications are correct.
    3) Importing the CD works but the tracks are imported in random order. Track information from CDDB providers is accurate eventhough nothing is displayed while selecting CD drive as per problem 1). Imported tracks in Music show in random order. This is also strange because when I was importing something from a CDDB indexed CD or even a non indexed one the tracks were always imported in the order they were written on disc.
    4) Going to Music -> Internet I get the same white and gray lines with no stations displayed but this time the status bar reads Zero Stations. Obviously I can't select/listen anything
    I'd say I'm quite experienced with iTunes, using it since 2005 but never had problems of this type. Some assistance would be helpful. I smell a bug that maybe shows up in my particular configuration. Searched everywhere, maybe not good enough, but couldn't find something even similar.

    i have the same problem no radio stations at all bit shabby hate technolgy now adays

  • Help with Motion Tracking and Masking?

    Hi. First and probably only post here. I've got a bit of an issue....
    I'm trying to create "snapshots" in my video that are created from masks which are then motion tracked and remain stationary. Here's a video of what i'm talking about... http://www.youtube.com/watch?v=9OhVAduuJc8
    The problem I'm running into is that after i motion track the layer, select a null object as the target, duplicate the video layer, mask the object, freeze frame, and pair it to a null layer, the object does not remain stationary as the ones in the video do. Instead it moves WITH the null object and I cant figure out why. I've gotten a tutorial from the guy who made the video, however it's private so i don't know if you guys will be able to see it. http://www.youtube.com/watch?v=zY0QLrMCcGM
    Either way, i followed the tutorial exactly and still to no avail. Are my settings messed up or what exactly is going on? Ive successfully done this project before but now that i'm using CS5, i'm running into these issues. If anyone has any advice i'd gladly try it out and return with the results.
    Thanks so much for trying to help me out.

    Yeah the null is still moving. Will freezing it lock the mask into place while still allowing the footage to play through? And how would i go about "freezing the null"?
    I just dont understand how this person does it in the tutorial, and the mask remains in place. I know you probably can't watch the tutorial cause the user has it set as private, but as far i know his mask stays in place, but uses the null (while still moving) as a tracking device to keep the mask from floating out of control as the camera moves through the shot.
    Sorry if I'm making this rather confusing. It's difficult to explain.
    Maybe it might be easier to explain how you would obtain the result from the video I've posted? Keep in mind I dont have CameraTracker.

  • Video with stereo track and click track for live performance

    Hello,
    I have a video that was created in FCP sync'd with a stereo sound track and a click track. I need to play this video live (using projection) with the stereo track routed to the main outs and the click routed to the in-ear monitors for a performer to sync with. I have not done this before and am trying to wrap my brain around it. I'm also hoping to come up with the easiest and most reliable solution. As I understand it, this video will not be able to play back from a burned DVD, but rather will need to play back in Logic with 2 audio tracks (L/R) for the sound track and then 1 track for the click. These 3 tracks can then be routed to their required destinations from a soundcard or mixer.
    Does this seem to be the best and most reliable method? I've only burned audio to video (never using a click) in FCP before and have always played back from a DVD. Now I have this live player/syncing component and am not sure of the best way to do it. I have some experience with Logic, but limited.
    I really appreciate any suggestions/tips any one might have.
    Thanks.

    I've opened the movie (with stereo track) in QT Pro and then added the click - and now the 2 audio files are there, sync'd up.
    When you say you opened the movie in QT Pro, I assume you mean the QT Pro version of Quicktime Player 7. So let's say you have the movie open in Quicktime Player 7, and you press ⌘J (Window > Show Movie Properties). And in the window that appears, hopefully you see several items listed, including Sound Track 1 and Sound Track 2. These are your two audio files, that are now part of the movie file. One of those files is your stereo soundtrack, and the other is your click. So let's assume that this is a total of 3 channels of sound (because I understand your click is mono).
    Select Sound Track 1, and select the tab Audio Settings. Let's assume this is the stereo soundtrack. In the scrolling area at the bottom right of the window, under the heading Assignment, you should see Left and Right. Let's leave it that way.
    Now select Sound Track 2. Under Assignment, there should be just one item listed (that is, there is only one channel in this Sound Track, if the click is mono). Under Assignment, it probably says Mono. Change that to Center.
    Save the movie. We're done with Quicktime Player for now. Launch Audio MIDI Setup. It's here:
    Macintosh HD/Applications/Utilities/Audio MIDI Setup
    I assume you have an audio interface connected that supports at least 3 channels. In AMS, find the window (or tab, depending on your OS version) for Audio Devices. Select your audio interface. Select the Output tab, and press the button Configure Speakers. In the window that appears, select Multichannel, and change the menu selection from Stereo to 5.1 Surround.
    You will probably see that "left front," "right front," and "center" are assigned to outputs 1, 2 and 3, respectively, of your audio interface. If not, make it so, and press the button Apply.
    Now when you play your movie, the stereo soundtrack will appear at outputs 1 and 2 of your audio interface, and the click will appear at output 3. Now you can cable your stereo mains to 1/2 and your in-ear monitors to 3.

  • How to login the remote desktop with user id and password using coded ui

    we are using vs 2013, we have automated some automated test cases using coded ui. i have on problem while i am running the those test cases in remote system. here the scenario is "after executed one test case we need to restart the system. After restarted
     I have to login the remote system with user credentials to continues execution for the remaining test cases." it is very helpful to me.. so please guide me how to overcome these problem? 
    Thanks in advance ...

    Hi Divakar,
    As far as I know, there isn’t this feature of remote test in VS2013.
    I suggest that you could submit this feature request:
    http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there so the others can vote it. If you submit this suggestion, you might post that link here which will
    benefit others who has the similar issue
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • TS4006 just lost my ipad, need to trackit  and wipe it clean asap

    help, need to remotely reset my ipdad that I  left in the backseat of a cab 
    and either reometly lock it or erase it

    Michael Black wrote:
    True, but you first have to be able to track it, so you can subsequently wipe it if desired.
    No you don't and if you give wipe command, cause command is available now, you will never track it since it will start wiping as soon as gets connected.
    " My advice would be, IF it is trackable in iCloud at all, would be to wipe it once you have a current active location fix"
    My advice would be different to activate lost mode and track it. But I prefer not to give advices, just inform of concequences.
    "but then I'm more concerned about protecting my information than about the trivially small chance of recovering a lost or stolen device."
    Lost mode will lock device and allow display message on the screen.
    Source: http://support.apple.com/kb/PH2700
    from source
    If your device is online, it locks and tracking begins (if applicable) immediately, and a confirmation email is sent to your Apple ID email address (the one you use with iCloud). If the device is a Mac, it restarts before it’s locked. If the device is offline, the lock and tracking (if applicable) take effect the next time it’s online.

  • Small Sales Office with Cisco 857W and Wireless Skype Handset

    I have a remote sales office which is connected to the internet via a Cisco 857W. One of the sales guys uses a Skype Wireless Handset. I am looking to improve the quality of the handset as much as I can with the local wireless network in the 857W. The handset has WMM (802.11e) and uses ports 1 (alternative ports 80 and 443). My question is how do I enable WMM (802.11e) on this router and how do I or should I give priority to these ports to improve call quality? Config file attached.
    thanks in advance,
    stuart.

    I'm not an expert on this subject but this link could help.
    http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_chapter09186a008067cc16.html

  • Anyone know anything about paying royalties to karaoke track companies if you sing with their track and want to put it on itunes and it is a cover song also...not my lyrics???

    Hi There!  I would like to put a song I sang on itunes. It is using a karaoke track from "Karaoke #1 hitmakers". And it is Justin Timberlake's version of "hallelujah. I can't find contact info for this karaoke company for starters...ANYWHERE in Google....and I wonder if someone can direct me on if I can even do this and how the royalties work so that it is totally legal and the "right thing to do" on all counts. I also want to give the "producer" of the song and myself royalties if there are any of course...as time goes on...is that something I need to register on BMI....you can tell I need some EDUCATIONAL TIPS and facts!  THANK YOU SO MUCH!!!!!      Mamalooshka! 

    I am only going to make one comment and I will leave the rest to someone with more experience on the model creation end of things. I am interested in that as much as you are since I have tried and and just couldn't figure it out and finally gave up on it.
    My comment is about the model making business as you describe it. There are companies out there that already provide this service. I do not know what prices they charge for their services, but a Google search will pop up quite of few of them. A person would have to check on pricing and all the rest of the details concerning this, but they are out there.
    I want to add that Multisim used to have a partnership with Edaparts.com to supply model information and footprints for free. When Edaparts became a portion of Partsminer.com this freebie ended and they now charge a subscription fee for this service. That really fudged things up in my opinion. Anyway, I thought I would let you know this if you didn't already and maybe you might be interested in checking it out.
    Message Edited by lacy on 10-28-2007 12:30 PM
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Cannot log into T61 from remote computer with wired network and Windows Explorer.

    Hi,
    I am using a T61 7662-cto with Windows 7 Professional
    When the T61 is connected on the home network with the wired network, I am not able to log into it remotely from another computer. On my second computer, I see the T61 with Windows Explorer but instead of getting the login window, it appears a Network Error with the message:
    “Check the spelling of the name. Otherwise, there might be a problem with your network.” With a error code 0x80070035, “The network path was not found.” I tried the “Diagnose” button but it doesn’t give solution.
    When the T61 is wireless connected, there is no problem. I can access it from my second computer.
    I never have problem to connect to the second computer from the T61 with any connection type . I just updated the Intel Wireless LAN (bg, abg, abgn) for Windows 7 – ThinkPad, with the drivers required but it changes nothing.
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73611
    Do you have a hint for this issue why the wired network gives problem?
    Thanks

    Open this post, go to the flagged message. On its right is a button
    to turn off the flag.
    I went to the site. The only problem I had was one has to sign in
    to see anything. Even the main page had a very large ''Please
    Sign In'' covering the window.
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • GR/GI with prod order and WIP

    Hi,
    I have 3 question to seek advice.
    1) GR/GI with production order
    when GR, production order is credited as goods already completed and moved to FG inventory and when GI, production order is debited as raw material is issued to production order. Correct?
    2) those still sitting in production order, meaning it is still WIP. Correct?
    3) Does WIP G/L is affected with every GR/GI entries or it is calculated during the period closing process only.
    Thanks

    1)
    At the time goods issue.....
    fi entry is........ rm consumption dr
                           inventory rm ...cr.
    CO-ENTRY is bellow,
    dr to the production order..
    At the time of g/r
    FI entry is as bellow
    Inventory fg a/c -dr and CR factory out put of production.....
    Co entry is as CR to production order as you said.....
    2) Till uncompleted goods in production order we can consider as wip......
    but when comes to WIP value system will consider the total cost posted to the production order.....
    Regards
    RAM

  • Making a CD with audio tracks and a "bonus" video- how to?

    Dear folk,
    I have seen this before (notably a Shaggy album from waaaay back but no longer have access to it to study its "breakdown")- a regular audio CD which functions normally in your CD player etc and then, when placed into a DVD player or onto your computer lets you view the video which is on the same disk.
    I am looking at getting my daughter's EP of original material done but would like to add a video which I am making as well, in this manner.
    Not sure that iTunes IS the right category but I don't use Pro Logic (though I own it and could get someone else to do it, if required)- help please?

    OK, thanks to Roger I had good info to take away and now know that mixed mode CDs would possibly evidence issues as in this process the data file (ie the video) would most likely be the first file on the finished CD which would give you that horrible squealing noise as you play it on a conventional CD player but that "enhanced" CDs will burn them (data video and audio tracks) as separate sessions, ensuring that each appliance only need deal with that which it CAN deal with.
    Toast will do this but, apparently, so will something called Dragonburn: http://dragon-burn.en.softonic.com/mac
    I haven't tested this yet (the audio I need to work with has still to be completed and I have to shoot the video) but hope to report back.
    Hope this helps anyone seeking to do something similar.

Maybe you are looking for