Remote Panels not working in embedded viewing mode

Hello,
I'm trying to develop a web version of my project using Labview remote panels. I configured the web server properties as it's described here: http://www.ni.com/white-paper/4791/en/
Currently I'm trying to create the web page on the web publishing tool. However when I select the Embedded viewing mode option I get an "Requested VI is not loaded into memory on the server computer" error on the web page that is created. But if I select Snapshot or Monitor viewing mode option the page is loaded without problems.
I'm using Labview 2013 and oppening the web page in google chrome. The VI from which I'm trying to create a remote panel has some subVIs that show the front panel when called. Is there anything I'm forgetting to configure, or do I need to have any plugins instaled on my browser?
Solved!
Go to Solution.

Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

Remote Panel not working in Windows 7 Starter

Hi all,
We have an application that can be controlled via remote panel. This is working fine in Windows XP PC. But when I try to access the same by opening Internet Explorer in a PC running Windows 7 Starter OS, I only get the 'Downloading 0.00% of 0 bytes'. I have disabled the Windows Firewall and there is no antivirus software also. What could be the reason for this? How could I solve this?
Thanks in advance,
Priyadarsini
Solved!
Go to Solution.

The system which had the problem was a netbook that came with Windows 7 Starter. We found out recently that there was some parental controls utility in the netbook that prevented the LabVIEW Remote Panel access. We were not aware of its presence & it had not shown any indication that it had blocked Remote Panel communication. We uninstalled this utility & the Remote Panel started working as intended. Thanks again for your help.

Rebel T5 does not work in live view mode. Live view is enabled but images are not being captured.

troyantonik, What lens do you have and have you tried other lenses with your camera to see if they also do not autofocus when you press the shutter button down halfway? Just in case a setting may be causing this, I recommend that you reset the camera to the default settings. Please do the following:
Press the MENU button.Select the [Tools #3] tab.Select [Clear Settings].Select [Clear All Camera Settings].Select [OK].Select [Clear All Custom Func.].Select [OK].Exit the menu.If this is a time sensitive-matter, additional support options are available at Contact Us.

Hello Troyantonik,
Since the issues with your camera seem to persist, we would recommend having the camera evaluated at the Canon Service Center. You can set up service through our web site, located here.

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

Why do my panels not work in CC 2014

I made my own panels in CC but they don't work in CC 2014. I miss them.

It's the latter. Thank you for answering my question.
Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
Why do my panels not work in CC 2014
created by Trevor Dennis in Photoshop General Discussion - View the full discussion
Are you talking about a custom workspace, or actual panels made with Configurator? If the former, then go Preferences > Sync settings. If the latter, then those Flash panels no longer work in CC 2014. Check out any of the multiple threads about Extensions being greyed out.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Input textbox not working in Fullscreen view

Hi,
I've created one form application in flash, i have fillup the form(inputbox) in normal view, its working fine. but it's not work in fullscreen view,
Please let me know how do enter the text in input textbox in fullscreen mode.
Note: input textbox not work in fullscreen mode.
Thanks
Suresh

Hello,
I think your problem is very similiar to a problem that I had been suffering from a few days ago.
I think that the below code should solve your problem:
stage.scaleMode = StageScaleMode.NO_BORDER;
Chinmaya

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

My Apple TV remote is not working.

My Apple TV remote is not working. It was fine this morning, but now ATV is not responding to it. It still access iTunes on my Mac so I don't think it's a battery issue. The white light flashes on ATV, but nothing happens. I have restarted ATV several times from the mains, but no change. Please help!

Hey Punkmonk1,
Thanks for the question. I understand that you are experiencing issues with your Apple TV remote. The following resource may provide a solution:
Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
http://support.apple.com/kb/TS5157
Thanks,
Matt M.

"Photos" option button in icloud control panel not working

Photos option button in icloud control panel not working...it is not greyed out, and it is ticked, but clicking on it has no effect. Windows 8.

luvsack wrote:
DOES ANYBODY RESPOND TO THESE QUESTIONS EVER? I HAVE THE SAME PROBLEM AND CAN FIND NO ANSWER ANYWHERE! ANSWER THE **** QUESTION PLEASE!!!!!!!!!!!!!!!!!!!!!!!
Windows 7 64
Start your own thread, and please stop shouting, it is hard to read, and who wants that.

Infopath systemuser() method is not working in infopath view @extrant site .

We have a sharepoint webapplication with infopath views .We have controlled the switch view with authenticating login use id .It is working perfectly in intranet.
When we are publishing the site to internet using public ip @ that time initially infopath forms were not opening so i have used Alternate access mapping and published the infopath forms in ip instead of server name .
Now infopath forms are getting opened but system user() rule is not working and infopath edit forms are not working .Even list view web part with assigned to filtration is also not working .
I am stuck on the issue since Monday . Please suggest how to make it possible . it is very urgent.
We want our customer to access using ad authentication.

Jeeva,
Did you create this form in InfoPath itself or you are modifying a list into InfoPath?
The first screenshot shows you have selected Total "is not equal to" Jan+Feb….
You can simply add Total field with “TextBox” and double click on it and select default value button.
Once it will open up a pop up select “fx” button in value and insert all fields like, Jan, Feb…and then put a “+” sign in between
This will auto populate value once you enter it into any of the month filed.
Also it you have copied fields for several month in InfoPath it won’t work. You have to insert each field separately
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

I bought a EarPods October last year in USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can lisence music but can not adjust the volume and answer the phone, can I get a new one or what can I get?

I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?

Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

Remote Panels not working in embedded viewing mode

Similar Messages

Maybe you are looking for