Remote server load balancing by ACE

Hi,
We have ACE 4710 inslatted in 1-Arm mode deployed in DC where it is load balancing DC servers properly. Now my management wants to load balance the DR servers as well using the DC ACE. Is this possible??

Hi Partha,
I think that by DR you mean Disaster Recovery. As far as I know normally a DR plan does not use just the ACE but a combination of GSS+ACE is used.
Also in my opinion if you want to use the ACE to handle the outage on one site you still have a single point of failure due to the physical location of the ACE.
I don't know the specifics for your situation but as I said normally the combination GSS+ACE is preferred; the GSS can redirect clients' requests to different ACE systems, located in different physical locations.
So as long as the DR serverfarm is reachable from the ACE, from the technical point of view you should not have any problem ; then you should check if your choice indeed meets the requirements for a DR solution.
If you have an account team better would be to speak with them they can advise on which solution suits better your needs and if what you have in mind is one of the solutions you can implement.
I hope this clarifies more
Alessandro

Similar Messages

  • Send Email issue using "Mail Server Load balancer"  (Cisco ACE 20)

    I have asked this question in SAP MII forum too but it appears issue could be in NetWeaver Mail API. Please let me know if someone have experienced this kind of issue or any suggestions.
    The send email action was working file in MII with smtp mail server on port 25. Recently basis did a change in mail server ip address and they installed a new Load Balancer . The Load balancer is between SMTP and MII. After this change MII does not send email (unknown source error). now MII send email action has ip address or qualified path of Load balancer in MII send email configuration instead of direct ip address of SMTP server. Below is the error message in Net Weaver logs.
    MII still sends email if direct ip address of email server  provided instead of Email Load balancer but not through Load balancer .
    Any suggestions ?
    Could not authenticate mail account (Unknown Source)
    [EXCEPTION]
    javax.mail.AuthenticationFailedException
    at javax.mail.Service.connect(Service.java:319)
    at javax.mail.Service.connect(Service.java:169)
    at javax.mail.Service.connect(Service.java:118)
    at com.sap.xmii.storage.connections.MailConnection.sendMail(MailConnection.java:202)
    at com.sap.xmii.bls.executables.actions.mail.MailActions.send(MailActions.java:223)
    at sun.reflect.GeneratedMethodAccessor1412.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Switch.doExecute(Switch.java:131)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)

    Hi Ahmed,
    I don't have experience with Blackberry, but, as the document mentions, the first thing to do would be making sure that the connection timeout  is set to something high enough
    You can find more details on how to modify this value at the link below:
    http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA2_3_0/configuration/security/guide/tcpipnrm.html#wp1074289
    I hope this helps
    Daniel

  • Email send issue using "Mail Server Load balancer"  (Cisco ACE 20)

    Please let me know if someone have experienced this kind of issue or any suggestions.
    The send email action was working file in MII with smtp mail server on port 25. Recently basis did a change in mail server ip address and they installed a new Load Balancer . The Load balancer is between SMTP and MII. After this change MII does not send email (unknown source error). now MII send email action has ip address or qualified path of Load balancer in MII send email configuration instead of direct ip address of SMTP server. Below is the error message in Net Weaver logs.
    MII still sends email if direct ip address of email server  provided but not through email Load balancer .
    Any suggestions ?
    Could not authenticate mail account (Unknown Source)
    [EXCEPTION]
    javax.mail.AuthenticationFailedException
    at javax.mail.Service.connect(Service.java:319)
    at javax.mail.Service.connect(Service.java:169)
    at javax.mail.Service.connect(Service.java:118)
    at com.sap.xmii.storage.connections.MailConnection.sendMail(MailConnection.java:202)
    at com.sap.xmii.bls.executables.actions.mail.MailActions.send(MailActions.java:223)
    at sun.reflect.GeneratedMethodAccessor1412.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Switch.doExecute(Switch.java:131)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Repeater.doExecute(Repeater.java:113)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:151)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:122)
    at com.sap.xmii.bls.executables.controls.Conditional.doExecute(Conditional.java:158)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseControl.execute(BaseControl.java:127)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runControl(ProductionRunner.java:97)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:64)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.bls.executables.actions.logic.LogicActions.transaction(LogicActions.java:310)
    at sun.reflect.GeneratedMethodAccessor387.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.sap.xmii.bls.engine.ReflectiveAction.doExecute(ReflectiveAction.java:747)
    at com.sap.xmii.bls.engine.BaseNode.executeNode(BaseNode.java:198)
    at com.sap.xmii.bls.engine.BaseAction.execute(BaseAction.java:76)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runAction(ProductionRunner.java:147)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:50)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.Sequence.execute(Sequence.java:59)
    at com.sap.xmii.bls.engine.runners.ProductionRunner.runSequence(ProductionRunner.java:126)
    at com.sap.xmii.bls.executables.sequences.RootNode.execute(RootNode.java:39)
    at com.sap.xmii.bls.engine.TransactionInstance.execute(TransactionInstance.java:1001)
    at com.sap.xmii.bls.engine.TransactionInstance.run(TransactionInstance.java:680)
    at com.sap.xmii.Illuminator.connectors.Xacute.XacuteRequestHandler.processQueryRequest(XacuteRequestHandler.java:342)
    at com.sap.xmii.Illuminator.connectors.Xacute.XacuteRequestHandler.QueryRequest(XacuteRequestHandler.java:135)
    at com.sap.xmii.Illuminator.connectors.Xacute.XacuteConnector.doProcessRequest(XacuteConnector.java:86)
    at com.sap.xmii.Illuminator.connectors.AbstractConnector.processRequest(AbstractConnector.java:83)
    at com.sap.xmii.Illuminator.server.QueryEngine.run(QueryEngine.java:41)
    at com.sap.xmii.Illuminator.services.handlers.IlluminatorService.processRequest(IlluminatorService.java:68)
    at com.sap.xmii.Illuminator.services.ServiceManager.run(ServiceManager.java:68)
    at com.sap.xmii.servlet.Illuminator.service(Illuminator.java:68)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    at com.sap.xmii.servlet.ServletRunner.run(ServletRunner.java:80)
    at com.sap.xmii.servlet.ServletRunner.run(ServletRunner.java:44)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.processServletRequest(ReportParser.java:610)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.parseServletTag(ReportParser.java:276)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.parseFile(ReportParser.java:154)
    at com.sap.xmii.Illuminator.gui.irpt.ReportParser.parse(ReportParser.java:119)
    at com.sap.xmii.servlet.ReportServlet.service(ReportServlet.java:90)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81)
    at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:96)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
    at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:96)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
    at com.sap.xsrf.filter.XSRFProtectorFilter.doFilter(XSRFProtectorFilter.java:62)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:468)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388)
    at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
    at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
    at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
    at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
    at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
    at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327)
    Date:
    2014-03-25
    Time:
    14:04:06:176
    Category:
    com.sap.xmii.storage.connections.MailConnection
    Location:
    com.sap.xmii.storage.connections.MailConnection
    Application:
    sap.com/xapps~xmii~ear
    Thread:
    Thread[HTTP Worker [@629095796],5,Dedicated_Application_Thread]
    Data Source:
    j2ee\cluster\server0\log\defaultTrace_00.trc
    Arguments:
    DSR Transaction:

    Have a look at this thread please: 
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f11f3079-b04a-4a8e-b89e-d56eb0532c42/the-mail-could-not-be-sent-to-the-recipients-because-of-the-mail-server-failure-sending-mail-using?forum=sqldatabaseengine
    Saeid Hasani [sqldevelop]

  • ACE 4710 server load balancing on ACE with routed model.

    Hi experts,
    Pls help me...i need server laod balance on ACE4710 with routed model sample configuration or configuration guide....thanks in advance....

    Here you go

  • Using ACE for proxy server load balancing

    Hello groups,
    I wanted to know your experiences of using ACE for proxy server load balancing.
    I want to load balance to a pool of proxy servers. Note: load-balancing should be based on the HTTP URL (i can't use source or dest. ip address) so that
    a certain domain always gets "cached/forwarded" to the same proxy server. I don't really want to put matching
    criteria in the configuration (such as /a* to S1, /b* to S2, /c* to S3,etc..), but have this hash calculated automatically.
    Can the ACE compute its own hash based on the number of "online" proxy servers ? ie. when 4 servers are online, distribute domains between 1,2,3,4 evenly.
    Should server 4 fail, recalculate hash so that the load of S4 gets distributed across the other 3 evenly. Also load-balancing domains of S1 ,S2 and S3 should not change if S4 fails.....
    regards,
    Geert

    This is done with the following predictor command:
    Scimitar1/Admin# conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    Scimitar1/Admin(config)# serverfarm Proxy
    Scimitar1/Admin(config-sfarm-host)# predictor hash ?
      address         Configure 'hash address' Predictor algorithms
      content         Configure 'hash http content' Predictor algorithms
      cookie          Configure 'hash cookie' Predictor algorithms
      header          Configure 'hash header' Predictor algorithm
      layer4-payload  Configure 'hash layer4-payload' Predictor algorithms
      url             Configure 'hash url' Predictor algorithm
    Scimitar1/Admin(config-sfarm-host)# predictor hash url
    It does hash the url and the result takes into account the number of active proxies dynamically.
    This command has been designed for this kind of scenario that you describe.
    Gilles.

  • Dev6 Server Load Balancing

    Hi
    I try to install Load Balancing with Dev6/Patch2 and OAS4.0.7.1
    on 4 Machines with WinNT Server 4 SP 5. I tried to do it as
    described in the documentation. But I did not succeed. It seems
    to be that the Doc is not complete or wrong. Could somebody give
    an example how to set up the LB Servers and Clients as NT
    Services ?
    Thank's in advance
    Charly
    null

    Hi Steven,
    No LACP and SLB are different.
    LACP is the Link Aggregation Control Protocol, which is the protocol used within the IEEE 802.3ad (now 802.1AX) Link Aggregation mechanism to control the bundling and unbundling of the physical links into an aggregate link.
    Server Load Balancing is a feature in IOS to load balance traffic destined to a virtual IP across a group of real IP. From Configuring Server Load Balancing:
    The SLB feature is a Cisco IOS-based solution that provides IP server load balancing. Using the IOS SLB feature, the network administrator defines a virtual server that represents a group of real servers in a cluster of network servers known as a server farm.
    Server Load Balancing is effectively what the Cisco Application Control Engine (ACE) etc., does but in IOS.
    Regards

  • App.server load balancing for SAP System with 1 PS

    Hi,
    In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
    After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
    This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
    1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
    This functionality is not working for me at all
    2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
    As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
    I would appreciate your feedbacks with this functionality.
    Thanks and Regards,
    Ernest Liczki

    Hi Preetish,
    This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
    Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
    The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
    Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
    Regards,
    Anton.
    Edited by: Anton Goselink on May 29, 2009 9:06 PM

  • Server Load balancing issues

    the servers are loadbalancing between the switches '3'
    and '2' and the link between the two switches is blocked.
    This link was forwarding before and thus any traffic going to the server was
    send to the Servers correctly no matter on which switch they are active.
    However after addition of another link in between the switches 'root'
    and '1', the path cost to the root has decreased and thus the link
    between the '2' and '3' is Blocking and the other link between
    the '2' and '1' is Forwarding as it should be ideally. But
    this would be creating an issue because the trafic coming from outside i.e.
    through switch '1' to the server will be correctly send to the
    server if the server NIC is active on the '3' because the Virtual MAC
    addresses are binded accordinlgy. In case the server falls onto the other
    NIC which is on the '2' the traffic won't be able to pass because the
    MAC address is not binded on the trunk connecting the switches '1'
    and '2'. This binding cannot be done because the same MAC address is
    being learned on the another trunk on the '1' which is connecting
    to 'root'. So if we bind the same Virtual MAC on two trunks on the same
    switch ('1') then this will cause MAC Address Flapping on the
    switch and hence canot be done.
    In another case,we can able to bind virtuak MAC on two trunks on the same
    switch('1') and it's working fine.
    The servers are load balancing in round robin fashion. each server has 2 NICs and work in Active-Passive mode. The servers load balance each other when all their active links are connected to '3' switch but when two of the active NICs of two servers are connected to '3' and the rest of the two active NICs from the other two servers are connected to '2' switch then only the forst 2 servers load balance and the other 2 servers do not load balance.
    Please help.
    Thanks in advance.

    In my experience, server load balancing is one of the most difficult things to get going properly in a switched LAN environment. Switched LANs are designed so that one MAC address can only be bound to one switch port. Therefore, if you have two NICs with the same MAC address (real or virtual), then you will get flapping somewhere.
    I have seen various ways that the manufacturers try to get around this limitation of switched LANs. For example, one technique I have seen, practiced by ISA Server, is to use a multicast MAC address for the service so that frames go to both exit ports. But that does not always work well unless you tweak the network to acommodate it.
    What sort of servers are they, and what system is used for the load balancing?
    Kevin Dorrell
    Luxembourg

  • WLC Radius Server Load Balance

    Hi,
    Can someone provide me detailed description on how WLC Radius Server Load balance works.
    Becuase, I encounted a problem of User Authenticated with the 1st Radius Server, but Accounting Records are actually on 2nd Server .
    Any response will be very appreciated
    -Angela

    Hi Angela,
    I pasted below the part of config guide explaining the different modes. In summary :
    -Fallback off means : when 1st radius server shows dead , WLC moves to the second. And will only change again when the 2nd is dead too.
    -Passive means : whent 1st radius is dead, WLC moves to the second. If there is a new authentication coming in, it will try the 1st radius server again
    -Active means : WLC constantly sends radius probes to detect when primary is back up.
    config radius fallback-test mode {off | passive | active}
    where
    •off disables RADIUS server fallback.
    •passive causes the controller to revert to a server with a lower priority from the available backup servers without using extraneous probe messages. The controller simply ignores all inactive servers for a time period and retries later when a RADIUS message needs to be sent.
    •active causes the controller to revert to a server with a lower priority from the available backup servers by using RADIUS probe messages to proactively determine whether a server that has been marked inactive is back online. The controller simply ignores all inactive servers for all active RADIUS requests. Once the primary server receives a response from the recovered ACS server, the active fallback RADIUS server no longer sends probe messages to the server requesting the active probe authentication.

  • CSM(content switching module) supports the 2 tier server load balance ?

    hi everyone,
    Does any know the CSM support 2 tier server load balance ?
    this means that CSM perform the server load balance for servers and the same servers require another time Server load balance. In the other word,
    the CSM supports server port and client port for server load balance ?
    thanks
    fred.

    Hi, this seems to describe a typical case of multi-tier design where the CSM needs to handle 2 types of connections:
    1. clients->CSM->serverfarm1
    2. serverfarm1->CSM->serverfarm2
    We usually refer to the second type of connections as server-to-server load balanced traffic.
    There is no problem in handling that scenario with the CSM and you have a few options.
    In particular, each virtual server on the CSM can be configured to only accept incoming connections from a specific VLAN, so you can use that as an additional security measure or to distinguish connections based on which VLAN they come in from.
    If you want to, you could even configure the CSM with 2 virtual servers with the same exact virtual IP and L4 port, but listening on 2 separate VLANs (the client-side VLAN and serverfarm1 VLAN) and use a different server farm based on that.
    One important thing to keep in mind when handling server-to-server load balanced connections: if serverfarm1 and serverfarm2 are on the same VLAN, you have to configure "client NAT" for the server-to-server connections, to force the return traffic back to the CSM.

  • Please provide vShield Manager Server Load Balance values

    Hi All:
         I couldn't find values about the server load balance of vShield Manager.
    Please provide these value:
    1. Throughput      Mbps
    2. Web port 80 server load balance connections:
    3. SSL port 443 server load balance connections:
    Thanks
    BR.
                            Vincent

    Hi Vincent,
    Can you please eloborate your question ?

  • FTP Load Balancing on ACE 4710

    Hi,
    I have two ACEs working in ROUTED-MODE. In the servers there are HTTP content and FTP content.
    - The load balancing is working in correct form.
    Now, I have a problem: The client wants to performs a FTP request to server in Internet from server belong to server farm configured in the ACE.
    In simple words, now the server belonging to the farm will be the client for the FTP server in Internet. The client can connect to the Internet FTP, he enter his username and password, but when he want to transfer data (command as ls, get, put) the connection is closed.
    - When the client makes the FTP comes with the VIP address 200.29.72.226 to the intenet FTP.
    - I have a capture when is performing the command "ls" and the connection was closed: The ACE stated:
    12:42:11.079794 00:08:74:4e:d4:67 > 00:0b:fc:fe:1b:01, ethertype 802.1Q (0x8100), length 79: vlan 2, p 0, ethertype IPv4, IP (tos 0x0, ttl 128, id 28479, offset 0, flags [DF], length: 61) 10.3.2.1.1911 > 200.54.172.202.21: P [tcp sum ok] 37:58(21) ack 161 win 16400
    12:42:11.079957 00:0b:fc:fe:1b:01 > 00:e0:b6:04:14:49, ethertype 802.1Q (0x8100), length 79: vlan 2, p 0, ethertype IPv4, IP (tos 0x0, ttl 128, id 28479, offset 0, flags [DF], length: 61, bad cksum a77 (->57b)!) 200.29.72.226.39292 > 200.54.172.202.21: P [bad tcp cksum 7d15 (->4ce)!] 37:58(21) ack 161 win 16400
    12:42:11.080088 00:e0:b6:04:14:49 > 00:0b:fc:fe:1b:01, ethertype 802.1Q (0x8100), length 79: vlan 46, p 0, ethertype IPv4, IP (tos 0x0, ttl 128, id 28479, offset 0, flags [DF], length: 61) 200.54.172.202.21 > 200.29.72.226.39292: R [tcp sum ok] 161:182(21) ack 37 win 16400 [RST PORT 10,3,2,1,7,191\015\012]
    12:42:11.079212 00:0b:fc:fe:1b:01 > 00:08:74:4e:d4:68, ethertype 802.1Q (0x8100), length 79: vlan 46, p 0, ethertype IPv4, IP (tos 0x0, ttl 128, id 28479, offset 0, flags [DF], length: 61, bad cksum 57b (->a77)!) 200.54.172.202.21 > 10.3.2.1.1911: R [bad tcp cksum 4d2 (->7d19)!] 161:182(21) ack 37 win 16400 [RST PORT 10,3,2,1,7,191\015\012]
    I atached a diagram of situation and actual configuration.
    I appreciate your help
    Thanks and regards,
    Jaime.

    Thanks Gilles! 
    I applied the commands you told me. I performed laboratory tests and it worked fine.
    Then I apply in the ACE of client and the results were positive.
    Thanks you very much again.
    Jaime.

  • Setting up additional load balancing on ACE 4710

    I recently deployed ACE 4710 to load balance traffic to a group of web servers. I would like to add additional server farm(s) with different applications on them to ACE 4710 for load balancing the traffic. How can I best achieve this goal? I currently use 3 interfaces out of 4 interfaces (Server Side interface, Client side interface, and Failover interface). Do I need to use my last interface to set up for the new VIP address for a new server farm? Is virtualized service a possible solution? Thank you in advance.

    You can configure trunking so that multiple vlans can exist.
    Also note that the vip ip address does not have to belong to a subnet.
    You could configure a static route on the upstream router pointing the traffic for the new vip to the interface ip address.
    Gilles.

  • Server load balancing for application access using multiple servers

    1.what are the methods supported by cisco switches for load balancing
    2. I want to achive users to access 1 particular ip from different locations but phsically few servers which handle the application and data

    well some servers allow you to install routing protocols on them. you could OSPF some links together.
    or you could NLB if it is a microsoft server. this uses a heartbeat network, a virtual mac and an IP address bound to the vmac.
    you could use NIC teaming. broadcom nics on dell servers allow you to configure them for loadbalancing, failover and a few other options.
    or if the servers are mirrored using MSCS or something similar (i.e configured the same but independant) you could just load balance using DNS.
    hope this helps. jsut some ideas quickly off the top of my head

  • Load Balancing on ACE Modules

    hi,
    Is it possible to load balance VIP hits on two ACE Modules in an active/active configuration. Or is it that only per FT group only single context could be active.
    Regards.

    You can have 1 context active on one ACE and the other context active on the other ACE.
    If you have 2 Vip, you can have 1 vip belonging to one context and the other vip belonging to the other context.
    Like this, you split the traffic between the 2 devices which allows you to handle more traffic than what 1 device could normally do.
    If one device can handle all your traffic, I prefer to only have 1 active unit and 1 standby.
    Easier to implement and troubleshoot.
    Gilles.

Maybe you are looking for