Remote Shutdown problem

Hi,
I am trying to shutdown (and restart) a Windows 7 (RC1) PC on my home network from another PC running Windows 7 (RC1). I am running the following command at a command prompt (I have tried with and without Administrator privilege):
shutdown /r /f /m \\backup
Originally I was getting "Access Denied" but after searching the internet I disabled file sharing on the remote PC and I now get the following error message:
"backup: The entered computer name is not valid or remote shutdown is not supported on the target computer. Check the name and then try again or contact your system administrator. (53)"
I have also tried using the IP address and the result is the same.
I am using the same user name on both PCs, with the same password and the user is a member of the administrator group on both PCs. I have also checked the following policy settings on the remote PC:
Local Policies:User Rights Assignment:Access this computer from the network: Administrators...
Local Policies:User Rights Assignment:Force shutdown from a remote station: Administrators
Local Policies:User Rights Assignment:Shutdown the system:Administrators
Local Policies:Security options:Network access: Sharing and security model for local accounts: Classic - local users authenticate as themselves
Local Policies:Security options:Shutdown:Allow system to be shutdown without having to log on.
Is there anything else to check?
Thanks
Patrick

I know this is a late response, but when I had the same problem, I discovered that the problem was the firewall setting related to File and Printer Sharing (SMB-IN). That rule was disabled for the Public profile; I'm not sure what triggers that profile's
use over the Domain or Private because the machine is on a LAN with the Domain Controller. When I enabled that rule, I was able to shutdown the servers. The puzzling thing for me is that the rule seemed to be "disabled" on its own.
I distinctly remember shutting down all 6 of my servers. Then 2 weeks ago, I could only shutdown 5. This week I could only shutdown 4, so I had to enable this rule on 2 servers, and I don't know what would have caused that setting to be changed.
Obviously, if any firewalls change on their own, that would appear to be a large disconcerting bug.
Just to reiterate, the firewall rule which prevented me from remotely shutdown was the File and Printer Sharing (SMB-IN) Inbound Firewall rule associated with the Public profile. I enabled it, and I could execute a remote shutdown command.

Similar Messages

Remote shutdown Access Denied (5)

I have a computer that I want to shutdown remotely via command line (the shutdown -i), and if I have "password enable sharing" turned on I get access denied(5) but if that is turned off it works fine.
How can I get this working again?
I have read that I may need to create a user account with the same username and password of the account on this computer I wish to shutdown, but I have tried this and it does not work, plus having a extra account on either computer is kind of annoying,
isn't there a way I can do it without having the same user account on my two PCs? Maybe like just using the username and password of the remote computer directly without actually having that account created on my PC?

I am using this solution on a home Workgroup network. Solution works for shutdown.exe and psshutdown.exe It works for Windows 8 and should work for Windows 7.
The problem is access is denied when attempting a remote shutdown using the interactive mode or the following command:
shutdown.exe /s /m \\COMPUTERNAME /t 00
Result:
COMPUTERNAME: Access is denied.(5)
CHANGE THE FOLLOWING SETTINGS ON THE REMOTE COMPUTER:
Control Panel, Network and Sharing Center, Change Advanced Sharing settings
"Private" enable "Turn on File and Printer sharing"
Add Registry Key
RUN regedt32.exe
Goto:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
Right click and add new DWORD
"LocalAccountTokenFilterPolicy"=dword:00000001
When user name and password are not the same on both computers change the following on the remote computer:
Change Local Security Policy
RUN secpol.msc
Local Security Policy, Security Settings, Local Policies, User Rights Assignment
Add "Everyone" to "Force shutdown from a remote system"
Texas

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

What "auto shutdown problem" are you talking about?

Random shutdown problem on G5 dual 2.3 GHz w/OS 10.4.7

Hello,
I’m using a dual 2.3 GHz G5, and it’s been working flawlessly since I bought it about a year ago. Until yesterday, I was running OS 10.4.5. Yesterday I upgraded to 10.4.7, and as soon as I booted up after the install, I started having a maddening problem with my computer randomly shutting down. (Not sleeping, but a complete power down.)
At first, the shutdown would happen immediately after powering up; my computer wouldn’t even make it to the blue progress bar. I zapped the PRAM and tried something I found online about unplugging the computer for 15 seconds, then plugging it back in. It now boots up, and I can log in, but the computer still shuts down randomly.
There seems to be no pattern to the shutdowns. I tried taxing the processor by opening and resampling huge Photoshop files while lots of other apps were open, and things were fine. Then it would conk out while I was composing an email.
I’ve heard of this random shutdown problem affecting Macbooks, but I have yet to find anything about G5 towers and OS 10.4.7. Does anyone have any info/advice?
Many thanks.
G5 dual 2.3 GHz Mac OS X (10.4.7) 2.5 GB RAM, 250 GB HD
G5 dual 2.3 GHz Mac OS X (10.4.7) 2.5 GB RAM, 250 GB HD

Thanks for the advice. I did check the system.log in Console and found the following altert:
PMU FORCED SHUTDOWN, CAUSE = -122
Now, since my computer is just over a year old, and since this problem happened immediately after applying the 10.4.7 OS update, I found it hard to believe that my hardware could be responsible. After 2 days of troubleshooting, I was stumped; after a 2-hour service call, so was Apple tech support. I ended up doing an archive and install back down to 10.4.5, and all is well.
I tested this issue on other machines running 10.4.7 and had no problems. It seems that the following specific combination of elements triggered the problem:
• PowerMac G5 dual 2.3 GHz (dual 1.8 machines did not exhibit the same problem)
• OS 10.4.7
• Logging in with Open Directory/Active Directory mobile profiles
• iTunes 7
Bottom line: if you’re using a dual 2.3 GHz PowerMac with mobile OD/AD profiles, do not update to 10.4.7, and steer clear of iTunes 7, at least until there is a patch update available.
(And Apple wants to be taken seriously in the enterprise market?)
G5 dual 2.3 GHz Mac OS X (10.4.7) 2.5 GB RAM, 250 GB HD

Clock problem and shutdown problem! Are they related?

Having a problem with my Dual 2 GHz Power Mac G5
A few days ago I noticed that my clock was not showing in the menu bar in the upper right corner of my desktop.
I went into System Preferences and went to Date & Time. Under the clock tab “Show Date and Time in Menu Bar” the box was not checked off. I checked it off and went to the “Date and Time” tab. The date and time was correct. I then checked the box “Click the lock to prevent further changes” to lock it. The date and time did not show up in the menu bar. I then went back to the tab “Show Date and Time in Menu Bar” and the box I checked was not checked off even thought the lock was still locked.
I then moved my cursor up to the menu bar in the upper right corner to see what would happen and the spinning beach ball started up but only for the original icons such as Bluetooth, Mobile Me (which I do not use), Time Machine, Spaces (doesn’t indicated the number when I switch Spaces, etc. The icons Norton Anti Virus and Tech Tool Pro in the menu bar are okay.
Also, when I attempt to shut down my computer the system clears the icons from my desktop except for a picture I have on my desktop and I get a gray wheel spinning and the system just hangs until I press and hold the on/off switch. I don’t know if the clock and shutdown problems are related.
The only new software I loaded recently was Skype with Logitech WebCam for the Mac and Quicken 2007 (Had a problem with Quicken 2006). They both are working okay.
And ideas on why I cannot get my clock to show up and my computer to shutdown?

You may have to consider a new post in the Hardware forum area for the computer
model and build/year; if there is a possibility of some basis the matter could be in
the machine and not the software running within it.
Your last two/three posts are in the Leopard 10.5(.8) forum area and do indicate
some kind of problem where troubleshooting the computer to discover if the matter
at hand would be either hardware or software based, may be the way to go.
The link to the 10.6 Snow Leopard forum won't be of help if your computer is a
PPC-based G5 tower, or other older pre-Intel configuration. And I remember
your earlier questions about the iMac G4 and some other issues in the past.
You may ask the moderators to put your post in a new thread of its own, in the
Leopard 10.5 area; so as to not 'piggy-back' another topic; even though some
of the odd issues you've had seem similar to this OP's topic line and appear to
be in the same general series of hardware. {The question here seems valid.}
The routine suggestions to check, test, verify, and perhaps repair or replace
the system; save a bootable clone to suitable external standalone device if
testing a suspect computer's viability is recommended; and the basics if not
already tried to help isolate the issue(s) as you've posted elsewhere, may be
of some help to try and do; so in that matter, a new thread of your own is best
for your own directed feedback. Since this kind of advice applies to most any
situation, including troubleshooting what may be hardware or software, I'm
adding my two and three-tenths cents worth here.
Your original included Apple Hardware Test may be of some help, in the process
of elimination; but is not conclusive, so other methods would be also suggested.
Some ideas appear to cover the same ground. However, system corruption or
disc failure can also manifest itself in odd ways & affect things indirectly for a time.
• OS X Maintenance And Troubleshooting
http://www.macattorney.com/ts.html
• Mac OS X BASIC TROUBLESHOOTING & MAINTENANCE
http://www.gballard.net/macrant/osx_troubleshooting.html
• Troubleshooting Tips for computers:
http://www.stcdio.org/offices/cem/mediaandtechnology/cem-computer-classes/troubl eshooting.html
So, at the risk of inadvertently alienating the OP, I am posting this as
a general help to following readers at some later time; and it may not
be too simple for a refresh course.
Some software issues can be resolved by repairing disk permissions,
and re-applying the last OS X update Combo file over the same one
already in the system; or if not up-to-date already, check & repair all
the general items and then apply the last Combo update.
A too-full hard disk drive can compromise the system integrity, so that
is a matter of course to keep up on what resources exist and remain
for the OS X to function correctly and for apps to multi-task together.
However that works out...
Good luck & happy computing!

Remote JDBC Problem with Oracle BPM Studio

Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
     at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
     at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
     at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
     at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
     ... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PM

I guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
     at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
     at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
     at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
     at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
     at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
     at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
     at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
     at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
     at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
     at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Are the replacement Heatsinks fixing people's Random Shutdown problems?

Is the replacement heatsink (the shorter one) still the method of choice from Apple for fixing Random Shutdown problems?
Is it working for people who've had it done recently?

Does this max out the CPU?
Yes. People who advocate this are testing to see if it's possible to induce a "random" shut down.
Why would anyone want to do that?
Good question. I've seen two reasons put forward: (a) It's better to make it happen now yourself rather let it strike out of the blue at some later date (and if running this test doesn't induce RSDs you can feel confident that your computer is probably immune); (b) If you take your MacBook to an Apple Store it could be useful for demonstrating to an Apple "genius" that your computer has the problem, especially if your shutdowns are infrequent.
(personally, I don't agree with (a))
MacBook (OS 10.4.8) iMac G4 (OS 10.3.9)

Late 2013 13"MBP-Shutdown Problem

I was having shutdown problems with my Late 2013 MBP 13"-the MBP would go to the gray screen and the small pinwheel would progress to different hash marks every 3-5 seconds, the machine would not shutdown at all, it was stalled, so I called Apple and we trouble shot. During our troubleshooting adventure it dawned on me that the problem could be related to my Antivirus Software-Intego. So I went ahead and disabled the real-time scanner and...viola, it shutdown with no problem. So I am letting people know that as of currently, Intego's real time scanner could cause issues during shutdown. I placed it on a scheduled scan and placed everything else on; no issues now.
So my only question would be; I have the same antivirus software on my early 2012 15" MBP with no issues. Though, I do remember having very slow shutdowns for sometime and then it seemed to resolve itself. The major difference in these two machines appears to be, besides the retina displays, the mechanical HDD vs SSD. My 15" (early 2012) has two Mech. HDD while the new 13" has of course SSD. I am thinking the antivirus software isn't handling the SSD appropriately.
Any-how, I just wanted to give a quick (though detailed) heads up.

OK, I messed around with this issue over the weekend. Here's what I did:
1. Used iPad 3 until I have run battery down to about 50%
2. Plug in to left USB port on Late 2013 rMBP. Battery icon starts displaying "flip-flop" behavior.
3. Replug into right side USB....no problem, all behaving well.
4. Tried plugging in my iPhone 4s into same cable on left USB port, no problem.
5. Replug iPhone into right side USB....again no problem, all behaving well.
Here's where it got interesting:
6. Exchange charging cable for a newer cable with the smaller-sized 30-pin dock connector.
7. Plug iPad into left USB port...and viola! Battery charging icon is steady...no "flip-flop"!
8. Replug into right side USB....no problem there either, all seems normal.
I have no idea what's going on, but this seemed to have solved prolem. BTW, the older cable, when plugged into wall charger, charges the iPad just fine.
Hope this helps someone else with this problem.

Shutdown problems

I tried updating to 10.5.6 this evening (I should have read these forums first to be forewarned...but anyway..). I was prompted to restart and ever since I have had difficulty shutting down. All icons, the dock, desktop and menu bars switch off (as usual) and the screen goes to blue and just sits there. The HD is spinning and the screen goes from a light blue to a slightly darker shade of that blue and the cursor shows up on the screen as well. But the computer just doesn't shut down.
Is there a way to force shutdown (other than holding the power button down)??
Also, what can I do to help fix the problem.

I ran disk utility and no apparent problems came up.
I then went hunting in other threads for clues and found a link to the Apple download updates page which gave me an idea.....
Since my shutdown problems started when I was prompted to restart for the 10.5.6 update I thought to re-install the 10.5.5 update.
This seems to have worked. No idea why 10.5.6 would lock up the shutdown process but at least I get a clean shutdown now.
Anyone have a similar issue??

Need more info - same spontaneous shutdown problem...

I'm using a very trustworthy 2.5 year-old T500 running Vista SP2 32-bit and my laptop has begun to have the same spontaneous shutdown problems as other users who've written here. I suspect it's overheating. I normally use my T500 on a docking station, which may or may not exacerbate an overheating issue.
I want to address this problem to ensure that I can continue to progress on my PhD dissertation (!) without crises, so I have taken some of the steps previously recommended for this problem here on this board. I installed TPFC today to begin monitoring CPU temperature and it appears that it runs between 55 and 65 C. Other temps listed are lower. I also made necessary adjustments in Power Settings to maximize fan speed and allow CPU speed to float. I also removed the battery so I'm using AC power with no battery/recharging processes to add to the problem, though I'm not certain that last part will make any difference.
I want to also clean the fan since I'm sure it's probably dirty after 2.5 years of continous use in my house. How can I take my laptop apart to clean the cooling fan? Or is this something I should take it to a repair shop to accomplish?
Thanks in advance for your advice.

No, my machine is not under warranty any longer. I agree, if it was, there's no way I'd risk voiding it by tearing it apart myself.
Thanks for causing me to double check. I DO have a few months of warranty left, so this baby is going to a professional! I could probalby do it myself, but why risk it?

Suddenly shutdown problem. (iphone 4s)

My phone suddenly shutting down (every day) (when I check my screen it is blank and I am swiching on every time), sometimes I need to use soft reset to able swich on.
Do you have this problem in you phones?
my ios is 5.0.1.

I restored with Itunes, but I have still same problem
Settings>General>About>>Diagnostic & Usage>Diagnostic & Usage Data>2012-01-03-211019.panic.plist
show me that I have hardware problems.(In forums I saw that if we have panic.plist it's mean that I have hardware problems, am I right ?
*In 10 days, It was happend 4 times (shutdown problem), after restore It was happened 1 time.

OS X Lion and Apple remote control problem

After installing OS X Lion my apple remote control no longer works properly. The menu wont come up on the screen, but it plays music if you press the buttons, but you are riding blind, can anyone help on this one?

It's not a problem with the remote, the problem is that Lion no longer has FrontRow.

Leopard (10.5 & 10.5.1) shutdown problems

I just got a brand new 20" iMac with Leopard. When I started it up I migrated user settings (but no applications) over from my 12" PowerBook G4 (in case that is relevant).
A few of the times I went to the "apple" menu to shutdown the computer, the spinning gear/wheel looking icon came up and the computer did not shutdown. I had to hold the power button down in the back to reboot it.
Also, I installed 10.5 -> 10.5.1 upgrade. At the end of the installation process it said it was updating the "boot cache" and would reboot when it was finished. After an hour it was still spinning, so I manually rebooted the machine.
I am still having shutdown problems.
Any help is greatly appreciated. I backed up all my important files and am thinking of reinstalling Leopard from scratch and going from there. Is this an easy task?
Thanks,
JRF

Hi JRF;
Since you admitted to forcing the iMac to shut down a number of times, it is very likely that you have corrupted the disk. I would suggest as a start that you boot from the install media and use Disk Utility to repair the disk. Hopefully that will be able to repair any disk corruption that you may have caused by your forced shutdowns.
Allan

ASM shutdown problem

Hi experts,
suddenly I faced ASM shutdown problems on a 2 node RAC. While trying to reboot the second node the resource ora.asm can't be shut down.
After 10 minutes the shutdown of ASM times out. There is an interesting line in the ohasd.log saying that ASM can't be shut down due to error code: 3.
Does anyone knows what this means? I googled hours and hours without any success, even in MOS I found no further informations.
Help is greatly appreciated!!!!!!
Thanks a lot
Volker
P.S. My environment:
- 2 node RAC OEL 6.3
- 11.2.0.4 Oracle Enterprise Edition

Hi gurus,
I noticed that the shutdown of the ASM instance went wrong as part of the OHAS. Unfortunately I have no error stack except this numerical error written in the ohasd.log.
Below you can find an excerpt of the ohasd.log:
2013-11-15 00:44:12.730: [
AGFW][2791917312]{0:0:124} Received the reply to the message: RESOURCE_STOP[ora.asm 1 1] ID 4099:724 from the agent /u01/app/11.2.0.4/grid/bin/oraagent_oracle
2013-11-15 00:44:12.731: [
AGFW][2791917312]{0:0:124} Agfw Proxy Server sending the reply to PE for message:RESOURCE_STOP[ora.asm 1 1] ID 4099:723
2013-11-15 00:44:12.731: [   CRSPE][2781411072]{0:0:124} Received reply to action [Stop] message ID: 723
2013-11-15 00:44:12.731: [
INIT][2781411072]{0:0:124} {0:0:124} Created alert : (:CRSPE00111:) : Stop action timed out!
2013-11-15 00:44:12.731: [   CRSPE][2781411072]{0:0:124} Stop action failed with error code: 3
2013-11-15 00:44:12.732: [
AGFW][2791917312]{0:0:124} Received the reply to the message: RESOURCE_STOP[ora.asm 1 1] ID 4099:724 from the agent /u01/app/11.2.0.4/grid/bin/oraagent_oracle
2013-11-15 00:44:12.732: [
AGFW][2791917312]{0:0:124} Agfw Proxy Server sending the last reply to PE for message:RESOURCE_STOP[ora.asm 1 1] ID 4099:723
2013-11-15 00:44:12.732: [   CRSPE][2781411072]{0:0:124} Received reply to action [Stop] message ID: 723
2013-11-15 00:44:12.732: [   CRSPE][2781411072]{0:0:124} RI [ora.asm 1 1] new internal state: [STABLE] old value: [STOPPING]
2013-11-15 00:44:12.732: [   CRSPE][2781411072]{0:0:124} CRS-2675: Stop of 'ora.asm' on 'rac2' failed
2013-11-15 00:44:12.733: [   CRSPE][2781411072]{0:0:124} RI [ora.asm 1 1] new internal state: [CLEANING] old value: [STABLE]
2013-11-15 00:44:12.733: [   CRSPE][2781411072]{0:0:124} Sending message to agfw: id = 925
2013-11-15 00:44:12.733: [   CRSPE][2781411072]{0:0:124} CRS-2679: Attempting to clean 'ora.asm' on 'rac2'
2013-11-15 00:44:12.733: [UiServer][2779309824]{0:0:124} Container [ Name: ORDER
MESSAGE:
TextMessage[CRS-2675: Stop of 'ora.asm' on 'rac2' failed]
MSGTYPE:
TextMessage[1]
OBJID:
TextMessage[ora.gpnpd]
WAIT:
TextMessage[0]
There are other error messages as well telling that one have to wait for the shutdown of the ASM instance. But no one is telling me the reason for that.
Regards
Volker

Remote Shutdown problem

Similar Messages

Maybe you are looking for